ARM: dts: imx6q-sabrelite: Put the nodes in alphabetical order

Put the nodes in alphabetical order so that further node additions can be better
organized.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 3530280f5150e43d826987ab225e4b53930b33aa..b96a72ee52970e1bd60ca7cfbab330f94ae0aa82 100644 (file)
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,8 +65,10 @@
        };
 };
 
-&sata {
+&audmux {
        status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_audmux_1>;
 };
 
 &ecspi1 {
@@ -83,11 +85,29 @@
        };
 };
 
-&ssi1 {
-       fsl,mode = "i2s-slave";
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet_1>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio3 23 0>;
        status = "okay";
 };
 
+&i2c1 {
+       status = "okay";
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1_1>;
+
+       codec: sgtl5000@0a {
+               compatible = "fsl,sgtl5000";
+               reg = <0x0a>;
+               clocks = <&clks 201>;
+               VDDA-supply = <&reg_2p5v>;
+               VDDIO-supply = <&reg_3p3v>;
+       };
+};
+
 &iomuxc {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_hog>;
@@ -108,23 +128,30 @@
        };
 };
 
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg_1>;
-       disable-over-current;
+&sata {
+       status = "okay";
+};
+
+&ssi1 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
+
+&uart2 {
        status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2_1>;
 };
 
 &usbh1 {
        status = "okay";
 };
 
-&fec {
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_enet_1>;
-       phy-mode = "rgmii";
-       phy-reset-gpios = <&gpio3 23 0>;
+       pinctrl-0 = <&pinctrl_usbotg_1>;
+       disable-over-current;
        status = "okay";
 };
 
@@ -145,30 +172,3 @@
        vmmc-supply = <&reg_3p3v>;
        status = "okay";
 };
-
-&audmux {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-       status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-       status = "okay";
-       clock-frequency = <100000>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_i2c1_1>;
-
-       codec: sgtl5000@0a {
-               compatible = "fsl,sgtl5000";
-               reg = <0x0a>;
-               clocks = <&clks 201>;
-               VDDA-supply = <&reg_2p5v>;
-               VDDIO-supply = <&reg_3p3v>;
-       };
-};