spi: clps711x: Remove <mach/hardware.h> dependency

This patch removes <mach/hardware.h> dependency. This is performed
by replace hard coded used memory regions and interrupt to getting
these values from resources passed to the driver. For the system-wide
registers we now able to use SYSCON driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index ab010c05dc5a9fe798195fcc5e8fc4b48c67d9d9..d9eec4e3b24635d9d2fb05c8e1bb74e5ca0d0a5c 100644 (file)
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -17,14 +17,21 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/spi-clps711x.h>
 
-#include <mach/hardware.h>
-
 #define DRIVER_NAME    "spi-clps711x"
 
+#define SYNCIO_FRMLEN(x)       ((x) << 8)
+#define SYNCIO_TXFRMEN         (1 << 14)
+
 struct spi_clps711x_data {
+       void __iomem            *syncio;
+       struct regmap           *syscon;
+       struct regmap           *syscon1;
        struct clk              *spi_clk;
        u32                     max_speed_hz;
 
@@ -49,31 +56,29 @@ static void spi_clps711x_setup_xfer(struct spi_device *spi,
 
        /* Setup SPI frequency divider */
        if (!xfer->speed_hz || (xfer->speed_hz >= hw->max_speed_hz))
-               clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
-                           SYSCON1_ADCKSEL(3), SYSCON1);
+               regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+                                  SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(3));
        else if (xfer->speed_hz >= (hw->max_speed_hz / 2))
-               clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
-                           SYSCON1_ADCKSEL(2), SYSCON1);
+               regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+                                  SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(2));
        else if (xfer->speed_hz >= (hw->max_speed_hz / 8))
-               clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
-                           SYSCON1_ADCKSEL(1), SYSCON1);
+               regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+                                  SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(1));
        else
-               clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) |
-                           SYSCON1_ADCKSEL(0), SYSCON1);
+               regmap_update_bits(hw->syscon1, SYSCON_OFFSET,
+                                  SYSCON1_ADCKSEL_MASK, SYSCON1_ADCKSEL(0));
 }
 
 static int spi_clps711x_prepare_message(struct spi_master *master,
                                        struct spi_message *msg)
 {
+       struct spi_clps711x_data *hw = spi_master_get_devdata(master);
        struct spi_device *spi = msg->spi;
 
-       /* Setup edge for transfer */
-       if (spi->mode & SPI_CPHA)
-               clps_writew(clps_readw(SYSCON3) | SYSCON3_ADCCKNSEN, SYSCON3);
-       else
-               clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCKNSEN, SYSCON3);
-
-       return 0;
+       /* Setup mode for transfer */
+       return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
+                                 (spi->mode & SPI_CPHA) ?
+                                 SYSCON3_ADCCKNSEN : 0);
 }
 
 static int spi_clps711x_transfer_one(struct spi_master *master,
@@ -92,7 +97,8 @@ static int spi_clps711x_transfer_one(struct spi_master *master,
 
        /* Initiate transfer */
        data = hw->tx_buf ? *hw->tx_buf++ : 0;
-       clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, SYNCIO);
+       writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);
+
        return 1;
 }
 
@@ -103,15 +109,15 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
        u8 data;
 
        /* Handle RX */
-       data = clps_readb(SYNCIO);
+       data = readb(hw->syncio);
        if (hw->rx_buf)
                *hw->rx_buf++ = data;
 
        /* Handle TX */
        if (--hw->len > 0) {
                data = hw->tx_buf ? *hw->tx_buf++ : 0;
-               clps_writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
-                           SYNCIO);
+               writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
+                      hw->syncio);
        } else
                spi_finalize_current_transfer(master);
 
@@ -120,10 +126,11 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
 
 static int spi_clps711x_probe(struct platform_device *pdev)
 {
-       int i, ret;
-       struct spi_master *master;
        struct spi_clps711x_data *hw;
        struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev);
+       struct spi_master *master;
+       struct resource *res;
+       int i, irq, ret;
 
        if (!pdata) {
                dev_err(&pdev->dev, "No platform data supplied\n");
@@ -135,6 +142,10 @@ static int spi_clps711x_probe(struct platform_device *pdev)
                return -EINVAL;
        }
 
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0)
+               return irq;
+
        master = spi_alloc_master(&pdev->dev, sizeof(*hw));
        if (!master)
                return -ENOMEM;
@@ -176,18 +187,35 @@ static int spi_clps711x_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, master);
 
+       hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
+       if (IS_ERR(hw->syscon)) {
+               ret = PTR_ERR(hw->syscon);
+               goto err_out;
+       }
+
+       hw->syscon1 = syscon_regmap_lookup_by_pdevname("syscon.1");
+       if (IS_ERR(hw->syscon1)) {
+               ret = PTR_ERR(hw->syscon1);
+               goto err_out;
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       hw->syncio = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(hw->syncio)) {
+               ret = PTR_ERR(hw->syncio);
+               goto err_out;
+       }
+
        /* Disable extended mode due hardware problems */
-       clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCON, SYSCON3);
+       regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);
 
        /* Clear possible pending interrupt */
-       clps_readl(SYNCIO);
+       readl(hw->syncio);
 
-       ret = devm_request_irq(&pdev->dev, IRQ_SSEOTI, spi_clps711x_isr, 0,
+       ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
                               dev_name(&pdev->dev), master);
-       if (ret) {
-               dev_err(&pdev->dev, "Can't request IRQ\n");
+       if (ret)
                goto err_out;
-       }
 
        ret = devm_spi_register_master(&pdev->dev, master);
        if (!ret) {