N: TsiChung Liew
E: Tsi-Chung.Liew@freescale.com
-D: Support for ColdFire MCF532x, MCF5445x
+D: Support for ColdFire MCF523x, MCF532x, MCF5445x
W: www.freescale.com
N: Hayden Fraser
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ M5235EVB mcf52x2
M5329EVB mcf532x
M54455EVB mcf5445x
EB+MCF-EV123 \
EB+MCF-EV123_internal \
idmr \
+ M5235EVB \
M5249EVB \
M5253EVB \
M5271EVB \
## Coldfire
#########################################################################
+M5235EVB_config \
+M5235EVB_Flash16_config \
+M5235EVB_Flash32_config: unconfig
+ @case "$@" in \
+ M5235EVB_config) FLASH=16;; \
+ M5235EVB_Flash16_config) FLASH=16;; \
+ M5235EVB_Flash32_config) FLASH=32;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${FLASH}" != "16" ] ; then \
+ echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \
+ echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+ else \
+ echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+ fi
+ @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
+
M5249EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
esac; \
>include/config.h ; \
if [ "$${FLASH}" == "INTEL" ] ; then \
- echo "#undef CFG_ATMEL_BOOT" >> include/config.h ; \
+ echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "... with INTEL boot..." ; \
else \
- echo "#define CFG_ATMEL_BOOT" >> include/config.h ; \
+ echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "... with ATMEL boot..." ; \
fi; \
- echo "#define CFG_INPUT_CLKSRC $${FREQ}" >>include/config.h ; \
+ echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
echo "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o mii.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+/*TEXT_BASE = 0xFFC00000*/
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
\ No newline at end of file
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ puts("Board: ");
+ puts("Freescale M5235 EVB\n");
+ return 0;
+};
+
+long int initdram(int board_type)
+{
+ volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+ volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+ u32 dramsize, i, dramclk;
+
+ /*
+ * When booting from external Flash, the port-size is less than
+ * the port-size of SDRAM. In this case it is necessary to enable
+ * Data[15:0] on Port Address/Data.
+ */
+ gpio->par_ad =
+ GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 |
+ GPIO_PAR_AD_DATAL;
+
+ /* Initialize PAR to enable SDRAM signals */
+ gpio->par_sdram =
+ GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS |
+ GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3);
+
+ dramsize = CFG_SDRAM_SIZE * 0x100000;
+ for (i = 0x13; i < 0x20; i++) {
+ if (dramsize == (1 << i))
+ break;
+ }
+ i--;
+
+ if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) {
+ dramclk = gd->bus_clk / (CFG_HZ * CFG_HZ);
+
+ /* Initialize DRAM Control Register: DCR */
+ sdram->dcr = SDRAMC_DCR_RTIM_9CLKS |
+ SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4);
+
+ /* Initialize DACR0 */
+ sdram->dacr0 =
+ SDRAMC_DARCn_BA(CFG_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 |
+ SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32;
+
+ /* Initialize DMR0 */
+ sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V;
+
+ /* Set IP (bit 3) in DACR */
+ sdram->dacr0 |= SDRAMC_DARCn_IP;
+
+ /* Wait 30ns to allow banks to precharge */
+ for (i = 0; i < 5; i++) {
+ asm("nop");
+ }
+
+ /* Write to this block to initiate precharge */
+ *(u32 *) (CFG_SDRAM_BASE) = 0xA5A59696;
+
+ /* Set RE (bit 15) in DACR */
+ sdram->dacr0 |= SDRAMC_DARCn_RE;
+
+ /* Wait for at least 8 auto refresh cycles to occur */
+ for (i = 0; i < 0x2000; i++) {
+ asm("nop");
+ }
+
+ /* Finish the configuration by issuing the MRS. */
+ sdram->dacr0 |= SDRAMC_DARCn_IMRS;
+
+ /* Write to the SDRAM Mode Register */
+ *(u32 *) (CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
+ }
+
+ return dramsize;
+};
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("DRAM test not implemented!\n");
+
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ if (setclear) {
+ gpio->par_feci2c |=
+ (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
+ } else {
+ gpio->par_feci2c &=
+ ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
+ }
+
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+#define STR_ID_KS8721BL "KS8721BL"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+ volatile fec_t *fecp = (fec_t *) (info->miibase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ volatile fec_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fec_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_s *info = dev->priv;
+ int phyaddr, pass;
+ uint phyno, phytype;
+
+ if (info->phyname_init)
+ return info->phy_addr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_KS8721BL:
+ strcpy(info->phy_name,
+ STR_ID_KS8721BL);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_KS8721BL:
+ printf(STR_ID_KS8721BL);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+int mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fec_t *fecp;
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fec_t *) info->miibase;
+
+ fecpin_setclear(dev, 1);
+
+ mii_reset(info);
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf523x/start.o (.text)
+ cpu/mcf523x/cpu_init.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf523x/start.o (.text)
+ cpu/mcf523x/cpu.o (.text)
+ cpu/mcf523x/cpu_init.o (.text)
+ cpu/mcf523x/interrupts.o (.text)
+ cpu/mcf523x/speed.o (.text)
+ lib_m68k/libm68k.a (.text)
+ common/dlmalloc.o (.text)
+ common/cmd_bootm.o (.text)
+ common/cmd_flash.o (.text)
+ common/cmd_elf.o (.text)
+ common/cmd_mem.o (.text)
+ common/console.o (.text)
+ common/main.o (.text)
+ lib_generic/libgeneric.a (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mcf523x/start.o (.text)
+ cpu/mcf523x/cpu_init.o (.text)
+ lib_m68k/traps.o (.text)
+ lib_m68k/interrupts.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+
+ .reloc :
+ {
+ __got_start = .;
+ *(.got)
+ __got_end = .;
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ _sbss = .;
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .;
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
--- /dev/null
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+# CFLAGS += -DET_DEBUG
+
+LIB = lib$(CPU).a
+
+START = start.o
+COBJS = cpu.o speed.o cpu_init.o interrupts.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+PLATFORM_CPPFLAGS += -m5307 -fPIC
--- /dev/null
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
+
+ ccm->rcr = CCM_RCR_SOFTRST;
+ /* we don't return! */
+ return 0;
+};
+
+int checkcpu(void)
+{
+ volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
+ u16 msk;
+ u16 id = 0;
+ u8 ver;
+
+ puts("CPU: ");
+ msk = (ccm->cir >> 6);
+ ver = (ccm->cir & 0x003f);
+ switch (msk) {
+ case 0x31:
+ id = 5235;
+ break;
+ }
+
+ if (id) {
+ printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
+ ver);
+ printf(" CPU CLK %d Mhz BUS CLK %d Mhz\n",
+ (int)(gd->cpu_clk / 1000000),
+ (int)(gd->bus_clk / 1000000));
+ }
+
+ return 0;
+};
+
+#if defined(CONFIG_WATCHDOG)
+/* Called by macro WATCHDOG_RESET */
+void watchdog_reset(void)
+{
+ volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+
+ wdp->sr = 0x5555; /* Count register */
+ asm("nop");
+ wdp->sr = 0xAAAA; /* Count register */
+}
+
+int watchdog_disable(void)
+{
+ volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+
+ /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */
+ wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */
+
+ puts("WATCHDOG:disabled\n");
+ return (0);
+}
+
+int watchdog_init(void)
+{
+ volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG);
+ u32 wdog_module = 0;
+
+ /* set timeout and enable watchdog */
+ wdog_module = ((CFG_CLK / CFG_HZ) * CONFIG_WATCHDOG_TIMEOUT);
+ wdog_module |= (wdog_module / 8192);
+ wdp->mr = wdog_module;
+
+ wdp->cr = WTM_WCR_EN;
+ puts("WATCHDOG:enabled\n");
+
+ return (0);
+}
+#endif /* CONFIG_WATCHDOG */
--- /dev/null
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#include <asm/immap.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+ volatile wdog_t *wdog = (wdog_t *) MMAP_WDOG;
+ volatile scm_t *scm = (scm_t *) MMAP_SCM;
+
+ /* watchdog is enabled by default - disable the watchdog */
+#ifndef CONFIG_WATCHDOG
+ wdog->cr = 0;
+#endif
+
+ scm->rambar = (CFG_INIT_RAM_ADDR | SCM_RAMBAR_BDE);
+
+ /* Port configuration */
+ gpio->par_cs = 0;
+
+#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
+ fbcs->csar0 = CFG_CS0_BASE;
+ fbcs->cscr0 = CFG_CS0_CTRL;
+ fbcs->csmr0 = CFG_CS0_MASK;
+#endif
+
+#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS1;
+ fbcs->csar1 = CFG_CS1_BASE;
+ fbcs->cscr1 = CFG_CS1_CTRL;
+ fbcs->csmr1 = CFG_CS1_MASK;
+#endif
+
+#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS2;
+ fbcs->csar2 = CFG_CS2_BASE;
+ fbcs->cscr2 = CFG_CS2_CTRL;
+ fbcs->csmr2 = CFG_CS2_MASK;
+#endif
+
+#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS3;
+ fbcs->csar3 = CFG_CS3_BASE;
+ fbcs->cscr3 = CFG_CS3_CTRL;
+ fbcs->csmr3 = CFG_CS3_MASK;
+#endif
+
+#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS4;
+ fbcs->csar4 = CFG_CS4_BASE;
+ fbcs->cscr4 = CFG_CS4_CTRL;
+ fbcs->csmr4 = CFG_CS4_MASK;
+#endif
+
+#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS5;
+ fbcs->csar5 = CFG_CS5_BASE;
+ fbcs->cscr5 = CFG_CS5_CTRL;
+ fbcs->csmr5 = CFG_CS5_MASK;
+#endif
+
+#if (defined(CFG_CS6_BASE) && defined(CFG_CS6_MASK) && defined(CFG_CS6_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS6;
+ fbcs->csar6 = CFG_CS6_BASE;
+ fbcs->cscr6 = CFG_CS6_CTRL;
+ fbcs->csmr6 = CFG_CS6_MASK;
+#endif
+
+#if (defined(CFG_CS7_BASE) && defined(CFG_CS7_MASK) && defined(CFG_CS7_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS_CS7;
+ fbcs->csar7 = CFG_CS7_BASE;
+ fbcs->cscr7 = CFG_CS7_CTRL;
+ fbcs->csmr7 = CFG_CS7_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+ gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK);
+ gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA);
+#endif
+
+ icache_enable();
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+ return (0);
+}
+
+void uart_port_conf(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ /* Setup Ports: */
+ switch (CFG_UART_PORT) {
+ case 0:
+ gpio->par_uart = (GPIO_PAR_UART_U0RXD | GPIO_PAR_UART_U0TXD);
+ break;
+ case 1:
+ gpio->par_uart =
+ (GPIO_PAR_UART_U1RXD_U1RXD | GPIO_PAR_UART_U1TXD_U1TXD);
+ break;
+ case 2:
+ gpio->par_timer = (GPIO_PAR_UART_U2RXD | GPIO_PAR_UART_U2TXD);
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* CPU specific interrupt routine */
+#include <common.h>
+#include <asm/immap.h>
+
+int interrupt_init(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ /* Make sure all interrupts are disabled */
+ intp->imrl0 |= 0x1;
+
+ enable_interrupts();
+ return 0;
+}
+
+#if defined(CONFIG_MCFTMR)
+void dtimer_intr_setup(void)
+{
+ volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE);
+
+ intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI;
+ intp->imrl0 &= ~INTC_IPRL_INT0;
+ intp->imrl0 &= ~CFG_TMRINTR_MASK;
+}
+#endif
--- /dev/null
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+/*
+ * get_clocks() fills in gd->cpu_clock and gd->bus_clk
+ */
+int get_clocks(void)
+{
+ volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
+
+ pll->syncr = PLL_SYNCR_MFD(1);
+
+ while (!(pll->synsr & PLL_SYNSR_LOCK));
+
+ gd->bus_clk = CFG_CLK;
+ gd->cpu_clk = (gd->bus_clk * 2);
+ return (0);
+}
--- /dev/null
+/*
+ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
+ * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "version.h"
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#define _START _start
+#define _FAULT _fault
+
+#define SAVE_ALL \
+ move.w #0x2700,%sr; /* disable intrs */ \
+ subl #60,%sp; /* space for 15 regs */ \
+ moveml %d0-%d7/%a0-%a6,%sp@;
+
+#define RESTORE_ALL \
+ moveml %sp@,%d0-%d7/%a0-%a6; \
+ addl #60,%sp; /* space for 15 regs */ \
+ rte;
+
+.text
+/*
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
+ */
+_vectors:
+
+INITSP: .long 0x00000000 /* Initial SP */
+INITPC: .long _START /* Initial PC */
+vector02: .long _FAULT /* Access Error */
+vector03: .long _FAULT /* Address Error */
+vector04: .long _FAULT /* Illegal Instruction */
+vector05: .long _FAULT /* Reserved */
+vector06: .long _FAULT /* Reserved */
+vector07: .long _FAULT /* Reserved */
+vector08: .long _FAULT /* Privilege Violation */
+vector09: .long _FAULT /* Trace */
+vector0A: .long _FAULT /* Unimplemented A-Line */
+vector0B: .long _FAULT /* Unimplemented F-Line */
+vector0C: .long _FAULT /* Debug Interrupt */
+vector0D: .long _FAULT /* Reserved */
+vector0E: .long _FAULT /* Format Error */
+vector0F: .long _FAULT /* Unitialized Int. */
+
+/* Reserved */
+vector10_17:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector18: .long _FAULT /* Spurious Interrupt */
+vector19: .long _FAULT /* Autovector Level 1 */
+vector1A: .long _FAULT /* Autovector Level 2 */
+vector1B: .long _FAULT /* Autovector Level 3 */
+vector1C: .long _FAULT /* Autovector Level 4 */
+vector1D: .long _FAULT /* Autovector Level 5 */
+vector1E: .long _FAULT /* Autovector Level 6 */
+vector1F: .long _FAULT /* Autovector Level 7 */
+
+/* TRAP #0 - #15 */
+vector20_2F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+/* Reserved */
+vector30_3F:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector64_127:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector128_191:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+vector192_255:
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+
+ .text
+
+ .globl _start
+_start:
+ nop
+ nop
+ move.w #0x2700,%sr /* Mask off Interrupt */
+
+ /* Set vector base register at the beginning of the Flash */
+ move.l #CFG_FLASH_BASE, %d0
+ movec %d0, %VBR
+
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
+ movec %d0, %RAMBAR1
+
+ /* invalidate and disable cache */
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ nop
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a2
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+
+ /* set stackpointer to end of internal ram to get some stackspace for the
+ first c-code */
+ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
+ clr.l %sp@-
+
+ move.l #__got_start, %a5 /* put relocation table address to a5 */
+
+ bsr cpu_init_f /* run low-level CPU init code (from flash) */
+ bsr board_init_f /* run low-level board init code (from flash) */
+
+ /* board_init_f() does not return */
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ link.w %a6,#0
+ move.l 8(%a6), %sp /* set new stack pointer */
+
+ move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
+ move.l 16(%a6), %a0 /* Save copy of Destination Address */
+
+ move.l #CFG_MONITOR_BASE, %a1
+ move.l #__init_end, %a2
+ move.l %a0, %a3
+
+ /* copy the code to RAM */
+1:
+ move.l (%a1)+, (%a3)+
+ cmp.l %a1,%a2
+ bgt.s 1b
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+ move.l %a0, %a1
+ add.l #(in_ram - CFG_MONITOR_BASE), %a1
+ jmp (%a1)
+
+in_ram:
+
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ move.l %a0, %a1
+ add.l #(_sbss - CFG_MONITOR_BASE),%a1
+ move.l %a0, %d1
+ add.l #(_ebss - CFG_MONITOR_BASE),%d1
+6:
+ clr.l (%a1)+
+ cmp.l %a1,%d1
+ bgt.s 6b
+
+ /*
+ * fix got table in RAM
+ */
+ move.l %a0, %a1
+ add.l #(__got_start - CFG_MONITOR_BASE),%a1
+ move.l %a1,%a5 /* * fix got pointer register a5 */
+
+ move.l %a0, %a2
+ add.l #(__got_end - CFG_MONITOR_BASE),%a2
+
+7:
+ move.l (%a1),%d1
+ sub.l #_start,%d1
+ add.l %a0,%d1
+ move.l %d1,(%a1)+
+ cmp.l %a2, %a1
+ bne 7b
+
+ /* calculate relative jump to board_init_r in ram */
+ move.l %a0, %a1
+ add.l #(board_init_r - CFG_MONITOR_BASE), %a1
+
+ /* set parameters for board_init_r */
+ move.l %a0,-(%sp) /* dest_addr */
+ move.l %d0,-(%sp) /* gd */
+ jsr (%a1)
+
+/*------------------------------------------------------------------------------*/
+/* exception code */
+ .globl _fault
+_fault:
+ jmp _fault
+ .globl _exc_handler
+
+_exc_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr exc_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+ .globl _int_handler
+_int_handler:
+ SAVE_ALL
+ movel %sp,%sp@-
+ bsr int_handler
+ addql #4,%sp
+ RESTORE_ALL
+
+/*------------------------------------------------------------------------------*/
+/* cache functions */
+ .globl icache_enable
+icache_enable:
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ nop
+ move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #(CFG_FLASH_BASE + 0xc000), %d0 /* Setup cache mask */
+ movec %d0, %ACR1 /* Enable cache */
+
+ move.l #0x80400100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_disable
+icache_disable:
+ move.l #0x00000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Disable cache */
+ clr.l %d0 /* Setup cache mask */
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl icache_status
+icache_status:
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1
+ move.l (%a1), %d0
+ rts
+
+ .globl icache_invalid
+icache_invalid:
+ move.l #0x80600100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ nop
+ rts
+
+ .globl dcache_enable
+dcache_enable:
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+ moveq #1, %d0
+ move.l %d0, (%a1)
+ rts
+
+ /* No dcache, just a dummy function */
+ .globl dcache_disable
+dcache_disable:
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+ moveq #0, %d0
+ move.l %d0, (%a1)
+ rts
+
+ .globl dcache_status
+dcache_status:
+ move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-4), %a1
+ move.l (%a1), %d0
+ rts
+
+/*------------------------------------------------------------------------------*/
+
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
#ifndef __IMMAP_H
#define __IMMAP_H
+#ifdef CONFIG_M5235
+#include <asm/immap_5235.h>
+#include <asm/m5235.h>
+
+#define CFG_FEC0_IOBASE (MMAP_FEC)
+#define CFG_UART_BASE (MMAP_UART0 + (CFG_UART_PORT * 0x40))
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CFG_UDELAY_BASE (MMAP_DTMR0)
+#define CFG_TMR_BASE (MMAP_DTMR3)
+#define CFG_TMRPND_REG (((volatile int0_t *)(CFG_INTR_BASE))->iprl0)
+#define CFG_TMRINTR_NO (INT0_LO_DTMR3)
+#define CFG_TMRINTR_MASK (INTC_IPRL_INT22)
+#define CFG_TMRINTR_PEND (CFG_TMRINTR_MASK)
+#define CFG_TMRINTR_PRI (0x1E) /* Level must include inorder to work */
+#define CFG_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CFG_UDELAY_BASE (MMAP_PIT0)
+#define CFG_PIT_BASE (MMAP_PIT1)
+#define CFG_PIT_PRESCALE (6)
+#endif
+
+#define CFG_INTR_BASE (MMAP_INTC0)
+#define CFG_NUM_IRQS (128)
+#endif /* CONFIG_M5235 */
+
#ifdef CONFIG_M5249
#include <asm/immap_5249.h>
#include <asm/m5249.h>
--- /dev/null
+/*
+ * MCF5329 Internal Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5235__
+#define __IMMAP_5235__
+
+#define MMAP_SCM (CFG_MBAR + 0x00000000)
+#define MMAP_SDRAM (CFG_MBAR + 0x00000040)
+#define MMAP_FBCS (CFG_MBAR + 0x00000080)
+#define MMAP_DMA0 (CFG_MBAR + 0x00000100)
+#define MMAP_DMA1 (CFG_MBAR + 0x00000110)
+#define MMAP_DMA2 (CFG_MBAR + 0x00000120)
+#define MMAP_DMA3 (CFG_MBAR + 0x00000130)
+#define MMAP_UART0 (CFG_MBAR + 0x00000200)
+#define MMAP_UART1 (CFG_MBAR + 0x00000240)
+#define MMAP_UART2 (CFG_MBAR + 0x00000280)
+#define MMAP_I2C (CFG_MBAR + 0x00000300)
+#define MMAP_QSPI (CFG_MBAR + 0x00000340)
+#define MMAP_DTMR0 (CFG_MBAR + 0x00000400)
+#define MMAP_DTMR1 (CFG_MBAR + 0x00000440)
+#define MMAP_DTMR2 (CFG_MBAR + 0x00000480)
+#define MMAP_DTMR3 (CFG_MBAR + 0x000004C0)
+#define MMAP_INTC0 (CFG_MBAR + 0x00000C00)
+#define MMAP_INTC1 (CFG_MBAR + 0x00000D00)
+#define MMAP_INTCACK (CFG_MBAR + 0x00000F00)
+#define MMAP_FEC (CFG_MBAR + 0x00001000)
+#define MMAP_FECFIFO (CFG_MBAR + 0x00001400)
+#define MMAP_GPIO (CFG_MBAR + 0x00100000)
+#define MMAP_CCM (CFG_MBAR + 0x00110000)
+#define MMAP_PLL (CFG_MBAR + 0x00120000)
+#define MMAP_EPORT (CFG_MBAR + 0x00130000)
+#define MMAP_WDOG (CFG_MBAR + 0x00140000)
+#define MMAP_PIT0 (CFG_MBAR + 0x00150000)
+#define MMAP_PIT1 (CFG_MBAR + 0x00160000)
+#define MMAP_PIT2 (CFG_MBAR + 0x00170000)
+#define MMAP_PIT3 (CFG_MBAR + 0x00180000)
+#define MMAP_MDHA (CFG_MBAR + 0x00190000)
+#define MMAP_RNG (CFG_MBAR + 0x001A0000)
+#define MMAP_SKHA (CFG_MBAR + 0x001B0000)
+#define MMAP_CAN1 (CFG_MBAR + 0x001C0000)
+#define MMAP_ETPU (CFG_MBAR + 0x001D0000)
+#define MMAP_CAN2 (CFG_MBAR + 0x001F0000)
+
+/* System Control Module register */
+typedef struct scm_ctrl {
+ u32 ipsbar; /* 0x00 - MBAR */
+ u32 res1; /* 0x04 */
+ u32 rambar; /* 0x08 - RAMBAR */
+ u32 res2; /* 0x0C */
+ u8 crsr; /* 0x10 Core Reset Status Register */
+ u8 cwcr; /* 0x11 Core Watchdog Control Register */
+ u8 lpicr; /* 0x12 Low-Power Interrupt Control Register */
+ u8 cwsr; /* 0x13 Core Watchdog Service Register */
+ u32 dmareqc; /* 0x14 */
+ u32 res3; /* 0x18 */
+ u32 mpark; /* 0x1C */
+ u8 mpr; /* 0x20 */
+ u8 res4[3]; /* 0x21 - 0x23 */
+ u8 pacr0; /* 0x24 */
+ u8 pacr1; /* 0x25 */
+ u8 pacr2; /* 0x26 */
+ u8 pacr3; /* 0x27 */
+ u8 pacr4; /* 0x28 */
+ u32 res5; /* 0x29 */
+ u8 pacr5; /* 0x2a */
+ u8 pacr6; /* 0x2b */
+ u8 pacr7; /* 0x2c */
+ u32 res6; /* 0x2d */
+ u8 pacr8; /* 0x2e */
+ u32 res7; /* 0x2f */
+ u8 gpacr; /* 0x30 */
+ u8 res8[3]; /* 0x31 - 0x33 */
+} scm_t;
+
+/* SDRAM controller registers */
+typedef struct sdram_ctrl {
+ u16 dcr; /* 0x00 Control register */
+ u16 res1[3]; /* 0x02 - 0x07 */
+ u32 dacr0; /* 0x08 address and control register 0 */
+ u32 dmr0; /* 0x0C mask register block 0 */
+ u32 dacr1; /* 0x10 address and control register 1 */
+ u32 dmr1; /* 0x14 mask register block 1 */
+} sdram_t;
+
+/* Flexbus module Chip select registers */
+typedef struct fbcs_ctrl {
+ u16 csar0; /* 0x00 Chip-Select Address Register 0 */
+ u16 res0;
+ u32 csmr0; /* 0x04 Chip-Select Mask Register 0 */
+ u16 res1; /* 0x08 */
+ u16 cscr0; /* 0x0A Chip-Select Control Register 0 */
+
+ u16 csar1; /* 0x0C Chip-Select Address Register 1 */
+ u16 res2;
+ u32 csmr1; /* 0x10 Chip-Select Mask Register 1 */
+ u16 res3; /* 0x14 */
+ u16 cscr1; /* 0x16 Chip-Select Control Register 1 */
+
+ u16 csar2; /* 0x18 Chip-Select Address Register 2 */
+ u16 res4;
+ u32 csmr2; /* 0x1C Chip-Select Mask Register 2 */
+ u16 res5; /* 0x20 */
+ u16 cscr2; /* 0x22 Chip-Select Control Register 2 */
+
+ u16 csar3; /* 0x24 Chip-Select Address Register 3 */
+ u16 res6;
+ u32 csmr3; /* 0x28 Chip-Select Mask Register 3 */
+ u16 res7; /* 0x2C */
+ u16 cscr3; /* 0x2E Chip-Select Control Register 3 */
+
+ u16 csar4; /* 0x30 Chip-Select Address Register 4 */
+ u16 res8;
+ u32 csmr4; /* 0x34 Chip-Select Mask Register 4 */
+ u16 res9; /* 0x38 */
+ u16 cscr4; /* 0x3A Chip-Select Control Register 4 */
+
+ u16 csar5; /* 0x3C Chip-Select Address Register 5 */
+ u16 res10;
+ u32 csmr5; /* 0x40 Chip-Select Mask Register 5 */
+ u16 res11; /* 0x44 */
+ u16 cscr5; /* 0x46 Chip-Select Control Register 5 */
+
+ u16 csar6; /* 0x48 Chip-Select Address Register 5 */
+ u16 res12;
+ u32 csmr6; /* 0x4C Chip-Select Mask Register 5 */
+ u16 res13; /* 0x50 */
+ u16 cscr6; /* 0x52 Chip-Select Control Register 5 */
+
+ u16 csar7; /* 0x54 Chip-Select Address Register 5 */
+ u16 res14;
+ u32 csmr7; /* 0x58 Chip-Select Mask Register 5 */
+ u16 res15; /* 0x5C */
+ u16 cscr7; /* 0x5E Chip-Select Control Register 5 */
+} fbcs_t;
+
+/* QSPI module registers */
+typedef struct qspi_ctrl {
+ u16 qmr; /* Mode register */
+ u16 res1;
+ u16 qdlyr; /* Delay register */
+ u16 res2;
+ u16 qwr; /* Wrap register */
+ u16 res3;
+ u16 qir; /* Interrupt register */
+ u16 res4;
+ u16 qar; /* Address register */
+ u16 res5;
+ u16 qdr; /* Data register */
+ u16 res6;
+} qspi_t;
+
+/* Interrupt module registers */
+typedef struct int0_ctrl {
+ /* Interrupt Controller 0 */
+ u32 iprh0; /* 0x00 Pending Register High */
+ u32 iprl0; /* 0x04 Pending Register Low */
+ u32 imrh0; /* 0x08 Mask Register High */
+ u32 imrl0; /* 0x0C Mask Register Low */
+ u32 frch0; /* 0x10 Force Register High */
+ u32 frcl0; /* 0x14 Force Register Low */
+ u8 irlr; /* 0x18 */
+ u8 iacklpr; /* 0x19 */
+ u16 res1[19]; /* 0x1a - 0x3c */
+ u8 icr0[64]; /* 0x40 - 0x7F Control registers */
+ u32 res3[24]; /* 0x80 - 0xDF */
+ u8 swiack0; /* 0xE0 Software Interrupt Acknowledge */
+ u8 res4[3]; /* 0xE1 - 0xE3 */
+ u8 Lniack0_1; /* 0xE4 Level n interrupt acknowledge resister */
+ u8 res5[3]; /* 0xE5 - 0xE7 */
+ u8 Lniack0_2; /* 0xE8 Level n interrupt acknowledge resister */
+ u8 res6[3]; /* 0xE9 - 0xEB */
+ u8 Lniack0_3; /* 0xEC Level n interrupt acknowledge resister */
+ u8 res7[3]; /* 0xED - 0xEF */
+ u8 Lniack0_4; /* 0xF0 Level n interrupt acknowledge resister */
+ u8 res8[3]; /* 0xF1 - 0xF3 */
+ u8 Lniack0_5; /* 0xF4 Level n interrupt acknowledge resister */
+ u8 res9[3]; /* 0xF5 - 0xF7 */
+ u8 Lniack0_6; /* 0xF8 Level n interrupt acknowledge resister */
+ u8 resa[3]; /* 0xF9 - 0xFB */
+ u8 Lniack0_7; /* 0xFC Level n interrupt acknowledge resister */
+ u8 resb[3]; /* 0xFD - 0xFF */
+} int0_t;
+
+typedef struct int1_ctrl {
+ /* Interrupt Controller 1 */
+ u32 iprh1; /* 0x00 Pending Register High */
+ u32 iprl1; /* 0x04 Pending Register Low */
+ u32 imrh1; /* 0x08 Mask Register High */
+ u32 imrl1; /* 0x0C Mask Register Low */
+ u32 frch1; /* 0x10 Force Register High */
+ u32 frcl1; /* 0x14 Force Register Low */
+ u8 irlr; /* 0x18 */
+ u8 iacklpr; /* 0x19 */
+ u16 res1[19]; /* 0x1a - 0x3c */
+ u8 icr1[64]; /* 0x40 - 0x7F */
+ u32 res4[24]; /* 0x80 - 0xDF */
+ u8 swiack1; /* 0xE0 Software Interrupt Acknowledge */
+ u8 res5[3]; /* 0xE1 - 0xE3 */
+ u8 Lniack1_1; /* 0xE4 Level n interrupt acknowledge resister */
+ u8 res6[3]; /* 0xE5 - 0xE7 */
+ u8 Lniack1_2; /* 0xE8 Level n interrupt acknowledge resister */
+ u8 res7[3]; /* 0xE9 - 0xEB */
+ u8 Lniack1_3; /* 0xEC Level n interrupt acknowledge resister */
+ u8 res8[3]; /* 0xED - 0xEF */
+ u8 Lniack1_4; /* 0xF0 Level n interrupt acknowledge resister */
+ u8 res9[3]; /* 0xF1 - 0xF3 */
+ u8 Lniack1_5; /* 0xF4 Level n interrupt acknowledge resister */
+ u8 resa[3]; /* 0xF5 - 0xF7 */
+ u8 Lniack1_6; /* 0xF8 Level n interrupt acknowledge resister */
+ u8 resb[3]; /* 0xF9 - 0xFB */
+ u8 Lniack1_7; /* 0xFC Level n interrupt acknowledge resister */
+ u8 resc[3]; /* 0xFD - 0xFF */
+} int1_t;
+
+typedef struct intgack_ctrl1 {
+ /* Global IACK Registers */
+ u8 swiack; /* 0xE0 Global Software Interrupt Acknowledge */
+ u8 Lniack[7]; /* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
+} intgack_t;
+
+/* GPIO port registers */
+typedef struct gpio_ctrl {
+ /* Port Output Data Registers */
+ u8 podr_addr; /* 0x00 */
+ u8 podr_datah; /* 0x01 */
+ u8 podr_datal; /* 0x02 */
+ u8 podr_busctl; /* 0x03 */
+ u8 podr_bs; /* 0x04 */
+ u8 podr_cs; /* 0x05 */
+ u8 podr_sdram; /* 0x06 */
+ u8 podr_feci2c; /* 0x07 */
+ u8 podr_uarth; /* 0x08 */
+ u8 podr_uartl; /* 0x09 */
+ u8 podr_qspi; /* 0x0A */
+ u8 podr_timer; /* 0x0B */
+ u8 podr_etpu; /* 0x0C */
+ u8 res1[3]; /* 0x0D - 0x0F */
+
+ /* Port Data Direction Registers */
+ u8 pddr_addr; /* 0x10 */
+ u8 pddr_datah; /* 0x11 */
+ u8 pddr_datal; /* 0x12 */
+ u8 pddr_busctl; /* 0x13 */
+ u8 pddr_bs; /* 0x14 */
+ u8 pddr_cs; /* 0x15 */
+ u8 pddr_sdram; /* 0x16 */
+ u8 pddr_feci2c; /* 0x17 */
+ u8 pddr_uarth; /* 0x18 */
+ u8 pddr_uartl; /* 0x19 */
+ u8 pddr_qspi; /* 0x1A */
+ u8 pddr_timer; /* 0x1B */
+ u8 pddr_etpu; /* 0x1C */
+ u8 res2[3]; /* 0x1D - 0x1F */
+
+ /* Port Data Direction Registers */
+ u8 ppdsdr_addr; /* 0x20 */
+ u8 ppdsdr_datah; /* 0x21 */
+ u8 ppdsdr_datal; /* 0x22 */
+ u8 ppdsdr_busctl; /* 0x23 */
+ u8 ppdsdr_bs; /* 0x24 */
+ u8 ppdsdr_cs; /* 0x25 */
+ u8 ppdsdr_sdram; /* 0x26 */
+ u8 ppdsdr_feci2c; /* 0x27 */
+ u8 ppdsdr_uarth; /* 0x28 */
+ u8 ppdsdr_uartl; /* 0x29 */
+ u8 ppdsdr_qspi; /* 0x2A */
+ u8 ppdsdr_timer; /* 0x2B */
+ u8 ppdsdr_etpu; /* 0x2C */
+ u8 res3[3]; /* 0x2D - 0x2F */
+
+ /* Port Clear Output Data Registers */
+ u8 pclrr_addr; /* 0x30 */
+ u8 pclrr_datah; /* 0x31 */
+ u8 pclrr_datal; /* 0x32 */
+ u8 pclrr_busctl; /* 0x33 */
+ u8 pclrr_bs; /* 0x34 */
+ u8 pclrr_cs; /* 0x35 */
+ u8 pclrr_sdram; /* 0x36 */
+ u8 pclrr_feci2c; /* 0x37 */
+ u8 pclrr_uarth; /* 0x38 */
+ u8 pclrr_uartl; /* 0x39 */
+ u8 pclrr_qspi; /* 0x3A */
+ u8 pclrr_timer; /* 0x3B */
+ u8 pclrr_etpu; /* 0x3C */
+ u8 res4[3]; /* 0x3D - 0x3F */
+
+ /* Pin Assignment Registers */
+ u8 par_ad; /* 0x40 */
+ u8 res5; /* 0x41 */
+ u16 par_busctl; /* 0x42 */
+ u8 par_bs; /* 0x44 */
+ u8 par_cs; /* 0x45 */
+ u8 par_sdram; /* 0x46 */
+ u8 par_feci2c; /* 0x47 */
+ u16 par_uart; /* 0x48 */
+ u8 par_qspi; /* 0x4A */
+ u8 res6; /* 0x4B */
+ u16 par_timer; /* 0x4C */
+ u8 par_etpu; /* 0x4E */
+ u8 res7; /* 0x4F */
+
+ /* Drive Strength Control Registers */
+ u8 dscr_eim; /* 0x50 */
+ u8 dscr_etpu; /* 0x51 */
+ u8 dscr_feci2c; /* 0x52 */
+ u8 dscr_uart; /* 0x53 */
+ u8 dscr_qspi; /* 0x54 */
+ u8 dscr_timer; /* 0x55 */
+ u16 res8; /* 0x56 */
+} gpio_t;
+
+/*Chip configuration module registers */
+typedef struct ccm_ctrl {
+ u8 rcr; /* 0x01 */
+ u8 rsr; /* 0x02 */
+ u16 res1; /* 0x03 */
+ u16 ccr; /* 0x04 Chip configuration register */
+ u16 lpcr; /* 0x06 Low-power Control register */
+ u16 rcon; /* 0x08 Rreset configuration register */
+ u16 cir; /* 0x0a Chip identification register */
+} ccm_t;
+
+/* Clock Module registers */
+typedef struct pll_ctrl {
+ u32 syncr; /* 0x00 synthesizer control register */
+ u32 synsr; /* 0x04 synthesizer status register */
+} pll_t;
+
+/* Watchdog registers */
+typedef struct wdog_ctrl {
+ u16 cr; /* 0x00 Control register */
+ u16 mr; /* 0x02 Modulus register */
+ u16 cntr; /* 0x04 Count register */
+ u16 sr; /* 0x06 Service register */
+} wdog_t;
+
+/* FlexCan module registers */
+typedef struct can_ctrl {
+ u32 mcr; /* 0x00 Module Configuration register */
+ u32 ctrl; /* 0x04 Control register */
+ u32 timer; /* 0x08 Free Running Timer */
+ u32 res1; /* 0x0C */
+ u32 rxgmask; /* 0x10 Rx Global Mask */
+ u32 rx14mask; /* 0x14 RxBuffer 14 Mask */
+ u32 rx15mask; /* 0x18 RxBuffer 15 Mask */
+ u32 errcnt; /* 0x1C Error Counter Register */
+ u32 errstat; /* 0x20 Error and status Register */
+ u32 res2; /* 0x24 */
+ u32 imask; /* 0x28 Interrupt Mask Register */
+ u32 res3; /* 0x2C */
+ u32 iflag; /* 0x30 Interrupt Flag Register */
+ u32 res4[19]; /* 0x34 - 0x7F */
+ u32 MB0_15[2048]; /* 0x80 Message Buffer 0-15 */
+} can_t;
+
+#endif /* __IMMAP_5235__ */
--- /dev/null
+/*
+ * mcf5329.h -- Definitions for Freescale Coldfire 5329
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef mcf5235_h
+#define mcf5235_h
+/****************************************************************************/
+
+/*********************************************************************
+* System Control Module (SCM)
+*********************************************************************/
+
+/* Bit definition and macros for SCM_IPSBAR */
+#define SCM_IPSBAR_BA(x) (((x)&0x03)<<30)
+#define SCM_IPSBAR_V (0x00000001)
+
+/* Bit definition and macros for SCM_RAMBAR */
+#define SCM_RAMBAR_BA(x) (((x)&0xFFFF)<<16)
+#define SCM_RAMBAR_BDE (0x00000200)
+
+/* Bit definition and macros for SCM_CRSR */
+#define SCM_CRSR_EXT (0x80)
+
+/* Bit definitions and macros for SCM_CWCR */
+#define SCM_CWCR_CWE (0x80)
+#define SCM_CWCR_CWRI (0x40)
+#define SCM_CWCR_CWT(x) (((x)&0x07)<<3)
+#define SCM_CWCR_CWTA (0x04)
+#define SCM_CWCR_CWTAVAL (0x02)
+#define SCM_CWCR_CWTIC (0x01)
+
+/* Bit definitions and macros for SCM_LPICR */
+#define SCM_LPICR_ENBSTOP (0x80)
+#define SCM_LPICR_XLPM_IPL(x) (((x)&0x07)<<4)
+#define SCM_LPICR_XLPM_IPL_ANY (0x00)
+#define SCM_LPICR_XLPM_IPL_L2_7 (0x10)
+#define SCM_LPICR_XLPM_IPL_L3_7 (0x20)
+#define SCM_LPICR_XLPM_IPL_L4_7 (0x30)
+#define SCM_LPICR_XLPM_IPL_L5_7 (0x40)
+#define SCM_LPICR_XLPM_IPL_L6_7 (0x50)
+#define SCM_LPICR_XLPM_IPL_L7 (0x70)
+
+/* Bit definitions and macros for SCM_DMAREQC */
+#define SCM_DMAREQC_EXT(x) (((x)&0x0F)<<16)
+#define SCM_DMAREQC_EXT_ETPU (0x00080000)
+#define SCM_DMAREQC_EXT_EXTDREQ2 (0x00040000)
+#define SCM_DMAREQC_EXT_EXTDREQ1 (0x00020000)
+#define SCM_DMAREQC_EXT_EXTDREQ0 (0x00010000)
+#define SCM_DMAREQC_DMAC3(x) (((x)&0x0F)<<12)
+#define SCM_DMAREQC_DMAC2(x) (((x)&0x0F)<<8)
+#define SCM_DMAREQC_DMAC1(x) (((x)&0x0F)<<4)
+#define SCM_DMAREQC_DMAC0(x) (((x)&0x0F))
+#define SCM_DMAREQC_DMACn_DTMR0 (0x04)
+#define SCM_DMAREQC_DMACn_DTMR1 (0x05)
+#define SCM_DMAREQC_DMACn_DTMR2 (0x06)
+#define SCM_DMAREQC_DMACn_DTMR3 (0x07)
+#define SCM_DMAREQC_DMACn_UART0RX (0x08)
+#define SCM_DMAREQC_DMACn_UART1RX (0x09)
+#define SCM_DMAREQC_DMACn_UART2RX (0x0A)
+#define SCM_DMAREQC_DMACn_UART0TX (0x0C)
+#define SCM_DMAREQC_DMACn_UART1TX (0x0D)
+#define SCM_DMAREQC_DMACn_UART3TX (0x0E)
+
+/* Bit definitions and macros for SCM_MPARK */
+#define SCM_MPARK_M2_P_EN (0x02000000)
+#define SCM_MPARK_M3_PRTY_MSK (0x00C00000)
+#define SCM_MPARK_M3_PRTY_4TH (0x00000000)
+#define SCM_MPARK_M3_PRTY_3RD (0x00400000)
+#define SCM_MPARK_M3_PRTY_2ND (0x00800000)
+#define SCM_MPARK_M3_PRTY_1ST (0x00C00000)
+#define SCM_MPARK_M2_PRTY_MSK (0x00300000)
+#define SCM_MPARK_M2_PRTY_4TH (0x00000000)
+#define SCM_MPARK_M2_PRTY_3RD (0x00100000)
+#define SCM_MPARK_M2_PRTY_2ND (0x00200000)
+#define SCM_MPARK_M2_PRTY_1ST (0x00300000)
+#define SCM_MPARK_M0_PRTY_MSK (0x000C0000)
+#define SCM_MPARK_M0_PRTY_4TH (0x00000000)
+#define SCM_MPARK_M0_PRTY_3RD (0x00040000)
+#define SCM_MPARK_M0_PRTY_2ND (0x00080000)
+#define SCM_MPARK_M0_PRTY_1ST (0x000C0000)
+#define SCM_MPARK_FIXED (0x00004000)
+#define SCM_MPARK_TIMEOUT (0x00002000)
+#define SCM_MPARK_PRKLAST (0x00001000)
+#define SCM_MPARK_LCKOUT_TIME(x) (((x)&0x0F)<<8)
+
+/* Bit definitions and macros for SCM_MPR */
+#define SCM_MPR_MPR3 (0x08)
+#define SCM_MPR_MPR2 (0x04)
+#define SCM_MPR_MPR1 (0x02)
+#define SCM_MPR_MPR0 (0x01)
+
+/* Bit definitions and macros for SCM_PACRn */
+#define SCM_PACRn_LOCK1 (0x80)
+#define SCM_PACRn_ACCESSCTRL1(x) (((x)&0x07)<<4)
+#define SCM_PACRn_LOCK0 (0x08)
+#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07))
+
+/* Bit definitions and macros for SCM_GPACR */
+#define SCM_PACRn_LOCK (0x80)
+#define SCM_PACRn_ACCESSCTRL0(x) (((x)&0x07))
+
+/*********************************************************************
+* SDRAM Controller (SDRAMC)
+*********************************************************************/
+/* Bit definitions and macros for SDRAMC_DCR */
+#define SDRAMC_DCR_NAM (0x2000)
+#define SDRAMC_DCR_COC (0x1000)
+#define SDRAMC_DCR_IS (0x0800)
+#define SDRAMC_DCR_RTIM_MASK (0x0C00)
+#define SDRAMC_DCR_RTIM_3CLKS (0x0000)
+#define SDRAMC_DCR_RTIM_6CLKS (0x0200)
+#define SDRAMC_DCR_RTIM_9CLKS (0x0400)
+#define SDRAMC_DCR_RC(x) (((x)&0xFF)<<8)
+
+/* Bit definitions and macros for SDRAMC_DARCn */
+#define SDRAMC_DARCn_BA(x) (((x)&0xFFFC)<<18)
+#define SDRAMC_DARCn_RE (0x00008000)
+#define SDRAMC_DARCn_CASL_MASK (0x00003000)
+#define SDRAMC_DARCn_CASL_C0 (0x00000000)
+#define SDRAMC_DARCn_CASL_C1 (0x00001000)
+#define SDRAMC_DARCn_CASL_C2 (0x00002000)
+#define SDRAMC_DARCn_CASL_C3 (0x00003000)
+#define SDRAMC_DARCn_CBM_MASK (0x00000700)
+#define SDRAMC_DARCn_CBM_CMD17 (0x00000000)
+#define SDRAMC_DARCn_CBM_CMD18 (0x00000100)
+#define SDRAMC_DARCn_CBM_CMD19 (0x00000200)
+#define SDRAMC_DARCn_CBM_CMD20 (0x00000300)
+#define SDRAMC_DARCn_CBM_CMD21 (0x00000400)
+#define SDRAMC_DARCn_CBM_CMD22 (0x00000500)
+#define SDRAMC_DARCn_CBM_CMD23 (0x00000600)
+#define SDRAMC_DARCn_CBM_CMD24 (0x00000700)
+#define SDRAMC_DARCn_IMRS (0x00000040)
+#define SDRAMC_DARCn_PS_MASK (0x00000030)
+#define SDRAMC_DARCn_PS_32 (0x00000000)
+#define SDRAMC_DARCn_PS_16 (0x00000010)
+#define SDRAMC_DARCn_PS_8 (0x00000020)
+#define SDRAMC_DARCn_IP (0x00000008)
+
+/* Bit definitions and macros for SDRAMC_DMRn */
+#define SDRAMC_DMRn_BAM(x) (((x)&0x3FFF)<<18)
+#define SDRAMC_DMRn_WP (0x00000100)
+#define SDRAMC_DMRn_V (0x00000001)
+
+/*********************************************************************
+* FlexBus Chip Selects (FBCS)
+*********************************************************************/
+/* Bit definitions and macros for FBCS_CSMR */
+#define FBCS_CSMR_BAM(x) (((x)&0xFFFF)<<16)
+#define FBCS_CSMR_BAM_4G (0xFFFF0000)
+#define FBCS_CSMR_BAM_2G (0x7FFF0000)
+#define FBCS_CSMR_BAM_1G (0x3FFF0000)
+#define FBCS_CSMR_BAM_1024M (0x3FFF0000)
+#define FBCS_CSMR_BAM_512M (0x1FFF0000)
+#define FBCS_CSMR_BAM_256M (0x0FFF0000)
+#define FBCS_CSMR_BAM_128M (0x07FF0000)
+#define FBCS_CSMR_BAM_64M (0x03FF0000)
+#define FBCS_CSMR_BAM_32M (0x01FF0000)
+#define FBCS_CSMR_BAM_16M (0x00FF0000)
+#define FBCS_CSMR_BAM_8M (0x007F0000)
+#define FBCS_CSMR_BAM_4M (0x003F0000)
+#define FBCS_CSMR_BAM_2M (0x001F0000)
+#define FBCS_CSMR_BAM_1M (0x000F0000)
+#define FBCS_CSMR_BAM_1024K (0x000F0000)
+#define FBCS_CSMR_BAM_512K (0x00070000)
+#define FBCS_CSMR_BAM_256K (0x00030000)
+#define FBCS_CSMR_BAM_128K (0x00010000)
+#define FBCS_CSMR_BAM_64K (0x00000000)
+#define FBCS_CSMR_WP (0x00000100)
+#define FBCS_CSMR_V (0x00000001)
+
+/* Bit definitions and macros for FBCS_CSCR */
+#define FBCS_CSCR_SRWS(x) (((x)&0x03)<<14)
+#define FBCS_CSCR_IWS(x) (((x)&0x0F)<<10)
+#define FBCS_CSCR_AA (0x0100)
+#define FBCS_CSCR_PS_MASK (0x00C0)
+#define FBCS_CSCR_PS_32 (0x0000)
+#define FBCS_CSCR_PS_16 (0x0080)
+#define FBCS_CSCR_PS_8 (0x0040)
+#define FBCS_CSCR_BEM (0x0020)
+#define FBCS_CSCR_BSTR (0x0010)
+#define FBCS_CSCR_BSTW (0x0008)
+#define FBCS_CSCR_SWWS(x) ((x)&0x07)
+
+/*********************************************************************
+* Queued Serial Peripheral Interface (QSPI)
+*********************************************************************/
+/* Bit definitions and macros for QSPI_QMR */
+#define QSPI_QMR_MSTR (0x8000)
+#define QSPI_QMR_DOHIE (0x4000)
+#define QSPI_QMR_BITS(x) (((x)&0x000F)<<10)
+#define QSPI_QMR_CPOL (0x0200)
+#define QSPI_QMR_CPHA (0x0100)
+#define QSPI_QMR_BAUD(x) ((x)&0x00FF)
+
+/* Bit definitions and macros for QSPI_QDLYR */
+#define QSPI_QDLYR_SPE (0x8000)
+#define QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
+#define QSPI_QDLYR_DTL(x) ((x)&0x00FF)
+
+/* Bit definitions and macros for QSPI_QWR */
+#define QSPI_QWR_HALT (0x8000)
+#define QSPI_QWR_WREN (0x4000)
+#define QSPI_QWR_WRTO (0x2000)
+#define QSPI_QWR_CSIV (0x1000)
+#define QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
+#define QSPI_QWR_NEWQP(x) ((x)&0x000F)
+
+/* Bit definitions and macros for QSPI_QIR */
+#define QSPI_QIR_WCEFB (0x8000)
+#define QSPI_QIR_ABRTB (0x4000)
+#define QSPI_QIR_ABRTL (0x1000)
+#define QSPI_QIR_WCEFE (0x0800)
+#define QSPI_QIR_ABRTE (0x0400)
+#define QSPI_QIR_SPIFE (0x0100)
+#define QSPI_QIR_WCEF (0x0008)
+#define QSPI_QIR_ABRT (0x0004)
+#define QSPI_QIR_SPIF (0x0001)
+
+/* Bit definitions and macros for QSPI_QAR */
+#define QSPI_QAR_ADDR(x) ((x)&0x003F)
+
+/* Bit definitions and macros for QSPI_QDR */
+#define QSPI_QDR_CONT (0x8000)
+#define QSPI_QDR_BITSE (0x4000)
+#define QSPI_QDR_DT (0x2000)
+#define QSPI_QDR_DSCK (0x1000)
+#define QSPI_QDR_QSPI_CS3 (0x0800)
+#define QSPI_QDR_QSPI_CS2 (0x0400)
+#define QSPI_QDR_QSPI_CS1 (0x0200)
+#define QSPI_QDR_QSPI_CS0 (0x0100)
+
+/*********************************************************************
+* Interrupt Controller (INTC)
+*********************************************************************/
+#define INT0_LO_RSVD0 (0)
+#define INT0_LO_EPORT1 (1)
+#define INT0_LO_EPORT2 (2)
+#define INT0_LO_EPORT3 (3)
+#define INT0_LO_EPORT4 (4)
+#define INT0_LO_EPORT5 (5)
+#define INT0_LO_EPORT6 (6)
+#define INT0_LO_EPORT7 (7)
+#define INT0_LO_SCM (8)
+#define INT0_LO_DMA0 (9)
+#define INT0_LO_DMA1 (10)
+#define INT0_LO_DMA2 (11)
+#define INT0_LO_DMA3 (12)
+#define INT0_LO_UART0 (13)
+#define INT0_LO_UART1 (14)
+#define INT0_LO_UART2 (15)
+#define INT0_LO_RSVD1 (16)
+#define INT0_LO_I2C (17)
+#define INT0_LO_QSPI (18)
+#define INT0_LO_DTMR0 (19)
+#define INT0_LO_DTMR1 (20)
+#define INT0_LO_DTMR2 (21)
+#define INT0_LO_DTMR3 (22)
+#define INT0_LO_FEC_TXF (23)
+#define INT0_LO_FEC_TXB (24)
+#define INT0_LO_FEC_UN (25)
+#define INT0_LO_FEC_RL (26)
+#define INT0_LO_FEC_RXF (27)
+#define INT0_LO_FEC_RXB (28)
+#define INT0_LO_FEC_MII (29)
+#define INT0_LO_FEC_LC (30)
+#define INT0_LO_FEC_HBERR (31)
+#define INT0_HI_FEC_GRA (32)
+#define INT0_HI_FEC_EBERR (33)
+#define INT0_HI_FEC_BABT (34)
+#define INT0_HI_FEC_BABR (35)
+#define INT0_HI_PIT0 (36)
+#define INT0_HI_PIT1 (37)
+#define INT0_HI_PIT2 (38)
+#define INT0_HI_PIT3 (39)
+#define INT0_HI_RNG (40)
+#define INT0_HI_SKHA (41)
+#define INT0_HI_MDHA (42)
+#define INT0_HI_CAN1_BUF0I (43)
+#define INT0_HI_CAN1_BUF1I (44)
+#define INT0_HI_CAN1_BUF2I (45)
+#define INT0_HI_CAN1_BUF3I (46)
+#define INT0_HI_CAN1_BUF4I (47)
+#define INT0_HI_CAN1_BUF5I (48)
+#define INT0_HI_CAN1_BUF6I (49)
+#define INT0_HI_CAN1_BUF7I (50)
+#define INT0_HI_CAN1_BUF8I (51)
+#define INT0_HI_CAN1_BUF9I (52)
+#define INT0_HI_CAN1_BUF10I (53)
+#define INT0_HI_CAN1_BUF11I (54)
+#define INT0_HI_CAN1_BUF12I (55)
+#define INT0_HI_CAN1_BUF13I (56)
+#define INT0_HI_CAN1_BUF14I (57)
+#define INT0_HI_CAN1_BUF15I (58)
+#define INT0_HI_CAN1_ERRINT (59)
+#define INT0_HI_CAN1_BOFFINT (60)
+/* 60-63 Reserved */
+
+/* 0 - 7 Reserved */
+#define INT1_LO_CAN1_BUF0I (8)
+#define INT1_LO_CAN1_BUF1I (9)
+#define INT1_LO_CAN1_BUF2I (10)
+#define INT1_LO_CAN1_BUF3I (11)
+#define INT1_LO_CAN1_BUF4I (12)
+#define INT1_LO_CAN1_BUF5I (13)
+#define INT1_LO_CAN1_BUF6I (14)
+#define INT1_LO_CAN1_BUF7I (15)
+#define INT1_LO_CAN1_BUF8I (16)
+#define INT1_LO_CAN1_BUF9I (17)
+#define INT1_LO_CAN1_BUF10I (18)
+#define INT1_LO_CAN1_BUF11I (19)
+#define INT1_LO_CAN1_BUF12I (20)
+#define INT1_LO_CAN1_BUF13I (21)
+#define INT1_LO_CAN1_BUF14I (22)
+#define INT1_LO_CAN1_BUF15I (23)
+#define INT1_LO_CAN1_ERRINT (24)
+#define INT1_LO_CAN1_BOFFINT (25)
+/* 26 Reserved */
+#define INT1_LO_ETPU_TC0F (27)
+#define INT1_LO_ETPU_TC1F (28)
+#define INT1_LO_ETPU_TC2F (29)
+#define INT1_LO_ETPU_TC3F (30)
+#define INT1_LO_ETPU_TC4F (31)
+#define INT1_HI_ETPU_TC5F (32)
+#define INT1_HI_ETPU_TC6F (33)
+#define INT1_HI_ETPU_TC7F (34)
+#define INT1_HI_ETPU_TC8F (35)
+#define INT1_HI_ETPU_TC9F (36)
+#define INT1_HI_ETPU_TC10F (37)
+#define INT1_HI_ETPU_TC11F (38)
+#define INT1_HI_ETPU_TC12F (39)
+#define INT1_HI_ETPU_TC13F (40)
+#define INT1_HI_ETPU_TC14F (41)
+#define INT1_HI_ETPU_TC15F (42)
+#define INT1_HI_ETPU_TC16F (43)
+#define INT1_HI_ETPU_TC17F (44)
+#define INT1_HI_ETPU_TC18F (45)
+#define INT1_HI_ETPU_TC19F (46)
+#define INT1_HI_ETPU_TC20F (47)
+#define INT1_HI_ETPU_TC21F (48)
+#define INT1_HI_ETPU_TC22F (49)
+#define INT1_HI_ETPU_TC23F (50)
+#define INT1_HI_ETPU_TC24F (51)
+#define INT1_HI_ETPU_TC25F (52)
+#define INT1_HI_ETPU_TC26F (53)
+#define INT1_HI_ETPU_TC27F (54)
+#define INT1_HI_ETPU_TC28F (55)
+#define INT1_HI_ETPU_TC29F (56)
+#define INT1_HI_ETPU_TC30F (57)
+#define INT1_HI_ETPU_TC31F (58)
+#define INT1_HI_ETPU_TGIF (59)
+
+/* Bit definitions and macros for INTC_IPRH */
+#define INTC_IPRH_INT63 (0x80000000)
+#define INTC_IPRH_INT62 (0x40000000)
+#define INTC_IPRH_INT61 (0x20000000)
+#define INTC_IPRH_INT60 (0x10000000)
+#define INTC_IPRH_INT59 (0x08000000)
+#define INTC_IPRH_INT58 (0x04000000)
+#define INTC_IPRH_INT57 (0x02000000)
+#define INTC_IPRH_INT56 (0x01000000)
+#define INTC_IPRH_INT55 (0x00800000)
+#define INTC_IPRH_INT54 (0x00400000)
+#define INTC_IPRH_INT53 (0x00200000)
+#define INTC_IPRH_INT52 (0x00100000)
+#define INTC_IPRH_INT51 (0x00080000)
+#define INTC_IPRH_INT50 (0x00040000)
+#define INTC_IPRH_INT49 (0x00020000)
+#define INTC_IPRH_INT48 (0x00010000)
+#define INTC_IPRH_INT47 (0x00008000)
+#define INTC_IPRH_INT46 (0x00004000)
+#define INTC_IPRH_INT45 (0x00002000)
+#define INTC_IPRH_INT44 (0x00001000)
+#define INTC_IPRH_INT43 (0x00000800)
+#define INTC_IPRH_INT42 (0x00000400)
+#define INTC_IPRH_INT41 (0x00000200)
+#define INTC_IPRH_INT40 (0x00000100)
+#define INTC_IPRH_INT39 (0x00000080)
+#define INTC_IPRH_INT38 (0x00000040)
+#define INTC_IPRH_INT37 (0x00000020)
+#define INTC_IPRH_INT36 (0x00000010)
+#define INTC_IPRH_INT35 (0x00000008)
+#define INTC_IPRH_INT34 (0x00000004)
+#define INTC_IPRH_INT33 (0x00000002)
+#define INTC_IPRH_INT32 (0x00000001)
+
+/* Bit definitions and macros for INTC_IPRL */
+#define INTC_IPRL_INT31 (0x80000000)
+#define INTC_IPRL_INT30 (0x40000000)
+#define INTC_IPRL_INT29 (0x20000000)
+#define INTC_IPRL_INT28 (0x10000000)
+#define INTC_IPRL_INT27 (0x08000000)
+#define INTC_IPRL_INT26 (0x04000000)
+#define INTC_IPRL_INT25 (0x02000000)
+#define INTC_IPRL_INT24 (0x01000000)
+#define INTC_IPRL_INT23 (0x00800000)
+#define INTC_IPRL_INT22 (0x00400000)
+#define INTC_IPRL_INT21 (0x00200000)
+#define INTC_IPRL_INT20 (0x00100000)
+#define INTC_IPRL_INT19 (0x00080000)
+#define INTC_IPRL_INT18 (0x00040000)
+#define INTC_IPRL_INT17 (0x00020000)
+#define INTC_IPRL_INT16 (0x00010000)
+#define INTC_IPRL_INT15 (0x00008000)
+#define INTC_IPRL_INT14 (0x00004000)
+#define INTC_IPRL_INT13 (0x00002000)
+#define INTC_IPRL_INT12 (0x00001000)
+#define INTC_IPRL_INT11 (0x00000800)
+#define INTC_IPRL_INT10 (0x00000400)
+#define INTC_IPRL_INT9 (0x00000200)
+#define INTC_IPRL_INT8 (0x00000100)
+#define INTC_IPRL_INT7 (0x00000080)
+#define INTC_IPRL_INT6 (0x00000040)
+#define INTC_IPRL_INT5 (0x00000020)
+#define INTC_IPRL_INT4 (0x00000010)
+#define INTC_IPRL_INT3 (0x00000008)
+#define INTC_IPRL_INT2 (0x00000004)
+#define INTC_IPRL_INT1 (0x00000002)
+#define INTC_IPRL_INT0 (0x00000001)
+
+/* Bit definitions and macros for INTC_IRLR */
+#define INTC_IRLRn(x) (((x)&0x7F)<<1)
+
+/* Bit definitions and macros for INTC_IACKLPRn */
+#define INTC_IACKLPRn_LEVEL(x) (((x)&0x07)<<4)
+#define INTC_IACKLPRn_PRI(x) ((x)&0x0F)
+
+/* Bit definitions and macros for INTC_ICRnx */
+#define INTC_ICRnx_IL(x) (((x)&0x07)<<3)
+#define INTC_ICRnx_IP(x) ((x)&0x07)
+
+/*********************************************************************
+* General Purpose I/O (GPIO)
+*********************************************************************/
+/* Bit definitions and macros for GPIO_PODR */
+#define GPIO_PODR_ADDR(x) (((x)&0x07)<<5)
+#define GPIO_PODR_ADDR_MASK (0xE0)
+#define GPIO_PODR_BS(x) ((x)&0x0F)
+#define GPIO_PODR_BS_MASK (0x0F)
+#define GPIO_PODR_CS(x) (((x)&0x7F)<<1)
+#define GPIO_PODR_CS_MASK (0xFE)
+#define GPIO_PODR_SDRAM(X) ((x)&0x3F)
+#define GPIO_PODR_SDRAM_MASK (0x3F)
+#define GPIO_PODR_FECI2C(x) GPIO_PODR_BS(x)
+#define GPIO_PODR_FECI2C_MASK GPIO_PODR_BS_MASK
+#define GPIO_PODR_UARTH(x) ((x)&0x03)
+#define GPIO_PODR_UARTH_MASK (0x03)
+#define GPIO_PODR_QSPI(x) ((x)&0x1F)
+#define GPIO_PODR_QSPI_MASK (0x1F)
+#define GPIO_PODR_ETPU(x) ((x)&0x07)
+#define GPIO_PODR_ETPU_MASK (0x07)
+
+/* Bit definitions and macros for GPIO_PDDR */
+#define GPIO_PDDR_ADDR(x) GPIO_PODR_ADDR(x)
+#define GPIO_PDDR_ADDR_MASK GPIO_PODR_ADDR_MASK
+#define GPIO_PDDR_BS(x) GPIO_PODR_BS(x)
+#define GPIO_PDDR_BS_MASK GPIO_PODR_BS_MASK
+#define GPIO_PDDR_CS(x) GPIO_PODR_CS(x)
+#define GPIO_PDDR_CS_MASK GPIO_PODR_CS_MASK
+#define GPIO_PDDR_SDRAM(X) GPIO_PODR_SDRAM(X)
+#define GPIO_PDDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK
+#define GPIO_PDDR_FECI2C(x) GPIO_PDDR_BS(x)
+#define GPIO_PDDR_FECI2C_MASK GPIO_PDDR_BS_MASK
+#define GPIO_PDDR_UARTH(x) GPIO_PODR_UARTH(x)
+#define GPIO_PDDR_UARTH_MASK GPIO_PODR_UARTH_MASK
+#define GPIO_PDDR_QSPI(x) GPIO_PODR_QSPI(x)
+#define GPIO_PDDR_QSPI_MASK GPIO_PODR_QSPI_MASK
+#define GPIO_PDDR_ETPU(x) GPIO_PODR_ETPU(x)
+#define GPIO_PDDR_ETPU_MASK GPIO_PODR_ETPU_MASK
+
+/* Bit definitions and macros for GPIO_PPDSDR */
+#define GPIO_PPDSDR_ADDR(x) GPIO_PODR_ADDR(x)
+#define GPIO_PPDSDR_ADDR_MASK GPIO_PODR_ADDR_MASK
+#define GPIO_PPDSDR_BS(x) GPIO_PODR_BS(x)
+#define GPIO_PPDSDR_BS_MASK GPIO_PODR_BS_MASK
+#define GPIO_PPDSDR_CS(x) GPIO_PODR_CS(x)
+#define GPIO_PPDSDR_CS_MASK GPIO_PODR_CS_MASK
+#define GPIO_PPDSDR_SDRAM(X) GPIO_PODR_SDRAM(X)
+#define GPIO_PPDSDR_SDRAM_MASK GPIO_PODR_SDRAM_MASK
+#define GPIO_PPDSDR_FECI2C(x) GPIO_PPDSDR_BS(x)
+#define GPIO_PPDSDR_FECI2C_MASK GPIO_PPDSDR_BS_MASK
+#define GPIO_PPDSDR_UARTH(x) GPIO_PODR_UARTH(x)
+#define GPIO_PPDSDR_UARTH_MASK GPIO_PODR_UARTH_MASK
+#define GPIO_PPDSDR_QSPI(x) GPIO_PODR_QSPI(x)
+#define GPIO_PPDSDR_QSPI_MASK GPIO_PODR_QSPI_MASK
+#define GPIO_PPDSDR_ETPU(x) GPIO_PODR_ETPU(x)
+#define GPIO_PPDSDR_ETPU_MASK GPIO_PODR_ETPU_MASK
+
+/* Bit definitions and macros for GPIO_PCLRR */
+#define GPIO_PCLRR_ADDR(x) GPIO_PODR_ADDR(x)
+#define GPIO_PCLRR_ADDR_MASK GPIO_PODR_ADDR_MASK
+#define GPIO_PCLRR_BS(x) GPIO_PODR_BS(x)
+#define GPIO_PCLRR_BS_MASK GPIO_PODR_BS_MASK
+#define GPIO_PCLRR_CS(x) GPIO_PODR_CS(x)
+#define GPIO_PCLRR_CS_MASK GPIO_PODR_CS_MASK
+#define GPIO_PCLRR_SDRAM(X) GPIO_PODR_SDRAM(X)
+#define GPIO_PCLRR_SDRAM_MASK GPIO_PODR_SDRAM_MASK
+#define GPIO_PCLRR_FECI2C(x) GPIO_PCLRR_BS(x)
+#define GPIO_PCLRR_FECI2C_MASK GPIO_PCLRR_BS_MASK
+#define GPIO_PCLRR_UARTH(x) GPIO_PODR_UARTH(x)
+#define GPIO_PCLRR_UARTH_MASK GPIO_PODR_UARTH_MASK
+#define GPIO_PCLRR_QSPI(x) GPIO_PODR_QSPI(x)
+#define GPIO_PCLRR_QSPI_MASK GPIO_PODR_QSPI_MASK
+#define GPIO_PCLRR_ETPU(x) GPIO_PODR_ETPU(x)
+#define GPIO_PCLRR_ETPU_MASK GPIO_PODR_ETPU_MASK
+
+/* Bit definitions and macros for GPIO_PAR */
+#define GPIO_PAR_AD_ADDR23 (0x80)
+#define GPIO_PAR_AD_ADDR22 (0x40)
+#define GPIO_PAR_AD_ADDR21 (0x20)
+#define GPIO_PAR_AD_DATAL (0x01)
+#define GPIO_PAR_BUSCTL_OE (0x4000)
+#define GPIO_PAR_BUSCTL_TA (0x1000)
+#define GPIO_PAR_BUSCTL_TEA(x) (((x)&0x03)<<10)
+#define GPIO_PAR_BUSCTL_TEA_MASK (0x0C00)
+#define GPIO_PAR_BUSCTL_TEA_GPIO (0x0400)
+#define GPIO_PAR_BUSCTL_TEA_DREQ1 (0x0800)
+#define GPIO_PAR_BUSCTL_TEA_EXTBUS (0x0C00)
+#define GPIO_PAR_BUSCTL_RWB (0x0100)
+#define GPIO_PAR_BUSCTL_TSIZ1 (0x0040)
+#define GPIO_PAR_BUSCTL_TSIZ0 (0x0010)
+#define GPIO_PAR_BUSCTL_TS(x) (((x)&0x03)<<2)
+#define GPIO_PAR_BUSCTL_TS_MASK (0x0C)
+#define GPIO_PAR_BUSCTL_TS_GPIO (0x04)
+#define GPIO_PAR_BUSCTL_TS_DACK2 (0x08)
+#define GPIO_PAR_BUSCTL_TS_EXTBUS (0x0C)
+#define GPIO_PAR_BUSCTL_TIP(x) ((x)&0x03)
+#define GPIO_PAR_BUSCTL_TIP_MASK (0x03)
+#define GPIO_PAR_BUSCTL_TIP_GPIO (0x01)
+#define GPIO_PAR_BUSCTL_TIP_DREQ0 (0x02)
+#define GPIO_PAR_BUSCTL_TIP_EXTBUS (0x03)
+#define GPIO_PAR_BS(x) ((x)&0x0F)
+#define GPIO_PAR_BS_MASK (0x0F)
+#define GPIO_PAR_CS(x) (((x)&0x7F)<<1)
+#define GPIO_PAR_CS_MASK (0xFE)
+#define GPIO_PAR_CS_CS7 (0x80)
+#define GPIO_PAR_CS_CS6 (0x40)
+#define GPIO_PAR_CS_CS5 (0x20)
+#define GPIO_PAR_CS_CS4 (0x10)
+#define GPIO_PAR_CS_CS3 (0x08)
+#define GPIO_PAR_CS_CS2 (0x04)
+#define GPIO_PAR_CS_CS1 (0x02)
+#define GPIO_PAR_CS_SD3 GPIO_PAR_CS_CS3
+#define GPIO_PAR_CS_SD2 GPIO_PAR_CS_CS2
+#define GPIO_PAR_SDRAM_CSSDCS(x) (((x)&0x03)<<6)
+#define GPIO_PAR_SDRAM_CSSDCS_MASK (0xC0)
+#define GPIO_PAR_SDRAM_SDWE (0x20)
+#define GPIO_PAR_SDRAM_SCAS (0x10)
+#define GPIO_PAR_SDRAM_SRAS (0x08)
+#define GPIO_PAR_SDRAM_SCKE (0x04)
+#define GPIO_PAR_SDRAM_SDCS(x) ((x)&0x03)
+#define GPIO_PAR_SDRAM_SDCS_MASK (0x03)
+#define GPIO_PAR_FECI2C_EMDC(x) (((x)&0x03)<<6)
+#define GPIO_PAR_FECI2C_EMDC_MASK (0xC0)
+#define GPIO_PAR_FECI2C_EMDC_U2TXD (0x40)
+#define GPIO_PAR_FECI2C_EMDC_I2CSCL (0x80)
+#define GPIO_PAR_FECI2C_EMDC_FECEMDC (0xC0)
+#define GPIO_PAR_FECI2C_EMDIO(x) (((x)&0x03)<<4)
+#define GPIO_PAR_FECI2C_EMDIO_MASK (0x30)
+#define GPIO_PAR_FECI2C_EMDIO_U2RXD (0x10)
+#define GPIO_PAR_FECI2C_EMDIO_I2CSDA (0x20)
+#define GPIO_PAR_FECI2C_EMDIO_FECEMDIO (0x30)
+#define GPIO_PAR_FECI2C_SCL(x) (((x)&0x03)<<2)
+#define GPIO_PAR_FECI2C_SCL_MASK (0x0C)
+#define GPIO_PAR_FECI2C_SCL_CAN0RX (0x08)
+#define GPIO_PAR_FECI2C_SCL_I2CSCL (0x0C)
+#define GPIO_PAR_FECI2C_SDA(x) ((x)&0x03)
+#define GPIO_PAR_FECI2C_SDA_MASK (0x03)
+#define GPIO_PAR_FECI2C_SDA_CAN0TX (0x02)
+#define GPIO_PAR_FECI2C_SDA_I2CSDA (0x03)
+#define GPIO_PAR_UART_DREQ2 (0x8000)
+#define GPIO_PAR_UART_CAN1EN (0x4000)
+#define GPIO_PAR_UART_U2RXD (0x2000)
+#define GPIO_PAR_UART_U2TXD (0x1000)
+#define GPIO_PAR_UART_U1RXD(x) (((x)&0x03)<<10)
+#define GPIO_PAR_UART_U1RXD_MASK (0x0C00)
+#define GPIO_PAR_UART_U1RXD_CAN0RX (0x0800)
+#define GPIO_PAR_UART_U1RXD_U1RXD (0x0C00)
+#define GPIO_PAR_UART_U1TXD(x) (((x)&0x03)<<8)
+#define GPIO_PAR_UART_U1TXD_MASK (0x0300)
+#define GPIO_PAR_UART_U1TXD_CAN0TX (0x0200)
+#define GPIO_PAR_UART_U1TXD_U1TXD (0x0300)
+#define GPIO_PAR_UART_U1CTS(x) (((x)&0x03)<<6)
+#define GPIO_PAR_UART_U1CTS_MASK (0x00C0)
+#define GPIO_PAR_UART_U1CTS_U2CTS (0x0080)
+#define GPIO_PAR_UART_U1CTS_U1CTS (0x00C0)
+#define GPIO_PAR_UART_U1RTS(x) (((x)&0x03)<<4)
+#define GPIO_PAR_UART_U1RTS_MASK (0x0030)
+#define GPIO_PAR_UART_U1RTS_U2RTS (0x0020)
+#define GPIO_PAR_UART_U1RTS_U1RTS (0x0030)
+#define GPIO_PAR_UART_U0RXD (0x0008)
+#define GPIO_PAR_UART_U0TXD (0x0004)
+#define GPIO_PAR_UART_U0CTS (0x0002)
+#define GPIO_PAR_UART_U0RTS (0x0001)
+#define GPIO_PAR_QSPI_CS1(x) (((x)&0x03)<<6)
+#define GPIO_PAR_QSPI_CS1_MASK (0xC0)
+#define GPIO_PAR_QSPI_CS1_SDRAMSCKE (0x80)
+#define GPIO_PAR_QSPI_CS1_QSPICS1 (0xC0)
+#define GPIO_PAR_QSPI_CS0 (0x20)
+#define GPIO_PAR_QSPI_DIN(x) (((x)&0x03)<<3)
+#define GPIO_PAR_QSPI_DIN_MASK (0x18)
+#define GPIO_PAR_QSPI_DIN_I2CSDA (0x10)
+#define GPIO_PAR_QSPI_DIN_QSPIDIN (0x18)
+#define GPIO_PAR_QSPI_DOUT (0x04)
+#define GPIO_PAR_QSPI_SCK(x) ((x)&0x03)
+#define GPIO_PAR_QSPI_SCK_MASK (0x03)
+#define GPIO_PAR_QSPI_SCK_I2CSCL (0x02)
+#define GPIO_PAR_QSPI_SCK_QSPISCK (0x03)
+#define GPIO_PAR_DT3IN(x) (((x)&0x03)<<14)
+#define GPIO_PAR_DT3IN_MASK (0xC000)
+#define GPIO_PAR_DT3IN_QSPICS2 (0x4000)
+#define GPIO_PAR_DT3IN_U2CTS (0x8000)
+#define GPIO_PAR_DT3IN_DT3IN (0xC000)
+#define GPIO_PAR_DT2IN(x) (((x)&0x03)<<12)
+#define GPIO_PAR_DT2IN_MASK (0x3000)
+#define GPIO_PAR_DT2IN_DT2OUT (0x1000)
+#define GPIO_PAR_DT2IN_DREQ2 (0x2000)
+#define GPIO_PAR_DT2IN_DT2IN (0x3000)
+#define GPIO_PAR_DT1IN(x) (((x)&0x03)<<10)
+#define GPIO_PAR_DT1IN_MASK (0x0C00)
+#define GPIO_PAR_DT1IN_DT1OUT (0x0400)
+#define GPIO_PAR_DT1IN_DREQ1 (0x0800)
+#define GPIO_PAR_DT1IN_DT1IN (0x0C00)
+#define GPIO_PAR_DT0IN(x) (((x)&0x03)<<8)
+#define GPIO_PAR_DT0IN_MASK (0x0300)
+#define GPIO_PAR_DT0IN_DREQ0 (0x0200)
+#define GPIO_PAR_DT0IN_DT0IN (0x0300)
+#define GPIO_PAR_DT3OUT(x) (((x)&0x03)<<6)
+#define GPIO_PAR_DT3OUT_MASK (0x00C0)
+#define GPIO_PAR_DT3OUT_QSPICS3 (0x0040)
+#define GPIO_PAR_DT3OUT_U2RTS (0x0080)
+#define GPIO_PAR_DT3OUT_DT3OUT (0x00C0)
+#define GPIO_PAR_DT2OUT(x) (((x)&0x03)<<4)
+#define GPIO_PAR_DT2OUT_MASK (0x0030)
+#define GPIO_PAR_DT2OUT_DACK2 (0x0020)
+#define GPIO_PAR_DT2OUT_DT2OUT (0x0030)
+#define GPIO_PAR_DT1OUT(x) (((x)&0x03)<<2)
+#define GPIO_PAR_DT1OUT_MASK (0x000C)
+#define GPIO_PAR_DT1OUT_DACK1 (0x0008)
+#define GPIO_PAR_DT1OUT_DT1OUT (0x000C)
+#define GPIO_PAR_DT0OUT(x) ((x)&0x03)
+#define GPIO_PAR_DT0OUT_MASK (0x0003)
+#define GPIO_PAR_DT0OUT_DACK0 (0x0002)
+#define GPIO_PAR_DT0OUT_DT0OUT (0x0003)
+#define GPIO_PAR_ETPU_TCRCLK (0x04)
+#define GPIO_PAR_ETPU_UTPU_ODIS (0x02)
+#define GPIO_PAR_ETPU_LTPU_ODIS (0x01)
+
+/* Bit definitions and macros for GPIO_DSCR */
+#define GPIO_DSCR_EIM_EIM1 (0x10)
+#define GPIO_DSCR_EIM_EIM0 (0x01)
+#define GPIO_DSCR_ETPU_ETPU31_24 (0x40)
+#define GPIO_DSCR_ETPU_ETPU23_16 (0x10)
+#define GPIO_DSCR_ETPU_ETPU15_8 (0x04)
+#define GPIO_DSCR_ETPU_ETPU7_0 (0x01)
+#define GPIO_DSCR_FECI2C_FEC (0x10)
+#define GPIO_DSCR_FECI2C_I2C (0x01)
+#define GPIO_DSCR_UART_IRQ (0x40)
+#define GPIO_DSCR_UART_UART2 (0x10)
+#define GPIO_DSCR_UART_UART1 (0x04)
+#define GPIO_DSCR_UART_UART0 (0x01)
+#define GPIO_DSCR_QSPI_QSPI (0x01)
+#define GPIO_DSCR_TIMER (0x01)
+
+/*********************************************************************
+* Chip Configuration Module (CCM)
+*********************************************************************/
+/* Bit definitions and macros for CCM_RCR */
+#define CCM_RCR_SOFTRST (0x80)
+#define CCM_RCR_FRCRSTOUT (0x40)
+
+/* Bit definitions and macros for CCM_RSR */
+#define CCM_RSR_SOFT (0x20)
+#define CCM_RSR_WDR (0x10)
+#define CCM_RSR_POR (0x08)
+#define CCM_RSR_EXT (0x04)
+#define CCM_RSR_LOC (0x02)
+#define CCM_RSR_LOL (0x01)
+
+/* Bit definitions and macros for CCM_CCR */
+#define CCM_CCR_LOAD (0x8000)
+#define CCM_CCR_SZEN (0x0040)
+#define CCM_CCR_PSTEN (0x0020)
+#define CCM_CCR_BME (0x0008)
+#define CCM_CCR_BMT(x) ((x)&0x07)
+#define CCM_CCR_BMT_MASK (0x0007)
+#define CCM_CCR_BMT_64K (0x0000)
+#define CCM_CCR_BMT_32K (0x0001)
+#define CCM_CCR_BMT_16K (0x0002)
+#define CCM_CCR_BMT_8K (0x0003)
+#define CCM_CCR_BMT_4K (0x0004)
+#define CCM_CCR_BMT_2K (0x0005)
+#define CCM_CCR_BMT_1K (0x0006)
+#define CCM_CCR_BMT_512 (0x0007)
+
+/* Bit definitions and macros for CCM_RCON */
+#define CCM_RCON_RCSC(x) (((x)&0x0003)<<8)
+#define CCM_RCON_RLOAD (0x0020)
+#define CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3)
+#define CCM_RCON_BOOTPS_MASK (0x0018)
+#define CCM_RCON_BOOTPS_32 (0x0018)
+#define CCM_RCON_BOOTPS_16 (0x0008)
+#define CCM_RCON_BOOTPS_8 (0x0010)
+#define CCM_RCON_MODE (0x0001)
+
+/* Bit definitions and macros for CCM_CIR */
+#define CCM_CIR_PIN(x) (((x)&0x03FF)<<6)
+#define CCM_CIR_PRN(x) ((x)&0x003F)
+
+/*********************************************************************
+* PLL Clock Module
+*********************************************************************/
+/* Bit definitions and macros for PLL_SYNCR */
+#define PLL_SYNCR_MFD(x) (((x)&0x07)<<24)
+#define PLL_SYNCR_MFD_MASK (0x07000000)
+#define PLL_SYNCR_RFC(x) (((x)&0x07)<<19)
+#define PLL_SYNCR_RFC_MASK (0x00380000)
+#define PLL_SYNCR_LOCEN (0x00040000)
+#define PLL_SYNCR_LOLRE (0x00020000)
+#define PLL_SYNCR_LOCRE (0x00010000)
+#define PLL_SYNCR_DISCLK (0x00008000)
+#define PLL_SYNCR_LOLIRQ (0x00004000)
+#define PLL_SYNCR_LOCIRQ (0x00002000)
+#define PLL_SYNCR_RATE (0x00001000)
+#define PLL_SYNCR_DEPTH(x) (((x)&0x03)<<10)
+#define PLL_SYNCR_EXP(x) ((x)&0x03FF)
+
+/* Bit definitions and macros for PLL_SYNSR */
+#define PLL_SYNSR_LOLF (0x00000200)
+#define PLL_SYNSR_LOC (0x00000100)
+#define PLL_SYNSR_MODE (0x00000080)
+#define PLL_SYNSR_PLLSEL (0x00000040)
+#define PLL_SYNSR_PLLREF (0x00000020)
+#define PLL_SYNSR_LOCKS (0x00000010)
+#define PLL_SYNSR_LOCK (0x00000008)
+#define PLL_SYNSR_LOCF (0x00000004)
+#define PLL_SYNSR_CALDONE (0x00000002)
+#define PLL_SYNSR_CALPASS (0x00000001)
+
+/*********************************************************************
+ * Edge Port
+*********************************************************************/
+#define EPORT_EPPAR_EPPA7(x) (((x)&0x03)<<14)
+#define EPORT_EPPAR_EPPA6(x) (((x)&0x03)<<12)
+#define EPORT_EPPAR_EPPA5(x) (((x)&0x03)<<10)
+#define EPORT_EPPAR_EPPA4(x) (((x)&0x03)<<8)
+#define EPORT_EPPAR_EPPA3(x) (((x)&0x03)<<6)
+#define EPORT_EPPAR_EPPA2(x) (((x)&0x03)<<4)
+#define EPORT_EPPAR_EPPA1(x) (((x)&0x03)<<2)
+
+#define EPORT_EPDDR_EPDD7(x) EPORT_EPPAR_EPPA7(x)
+#define EPORT_EPDDR_EPDD6(x) EPORT_EPPAR_EPPA6(x)
+#define EPORT_EPDDR_EPDD5(x) EPORT_EPPAR_EPPA5(x)
+#define EPORT_EPDDR_EPDD4(x) EPORT_EPPAR_EPPA4(x)
+#define EPORT_EPDDR_EPDD3(x) EPORT_EPPAR_EPPA3(x)
+#define EPORT_EPDDR_EPDD2(x) EPORT_EPPAR_EPPA2(x)
+#define EPORT_EPDDR_EPDD1(x) EPORT_EPPAR_EPPA1(x)
+
+#define EPORT_EPIER_EPIE7 (0x80)
+#define EPORT_EPIER_EPIE6 (0x40)
+#define EPORT_EPIER_EPIE5 (0x20)
+#define EPORT_EPIER_EPIE4 (0x10)
+#define EPORT_EPIER_EPIE3 (0x08)
+#define EPORT_EPIER_EPIE2 (0x04)
+#define EPORT_EPIER_EPIE1 (0x02)
+
+#define EPORT_EPDR_EPDR7 EPORT_EPIER_EPIE7
+#define EPORT_EPDR_EPDR6 EPORT_EPIER_EPIE6
+#define EPORT_EPDR_EPDR5 EPORT_EPIER_EPIE5
+#define EPORT_EPDR_EPDR4 EPORT_EPIER_EPIE4
+#define EPORT_EPDR_EPDR3 EPORT_EPIER_EPIE3
+#define EPORT_EPDR_EPDR2 EPORT_EPIER_EPIE2
+#define EPORT_EPDR_EPDR1 EPORT_EPIER_EPIE1
+
+#define EPORT_EPPDR_EPPDR7 EPORT_EPIER_EPIE7
+#define EPORT_EPPDR_EPPDR6 EPORT_EPIER_EPIE6
+#define EPORT_EPPDR_EPPDR5 EPORT_EPIER_EPIE5
+#define EPORT_EPPDR_EPPDR4 EPORT_EPIER_EPIE4
+#define EPORT_EPPDR_EPPDR3 EPORT_EPIER_EPIE3
+#define EPORT_EPPDR_EPPDR2 EPORT_EPIER_EPIE2
+#define EPORT_EPPDR_EPPDR1 EPORT_EPIER_EPIE1
+
+/*********************************************************************
+* Watchdog Timer Modules (WTM)
+*********************************************************************/
+/* Bit definitions and macros for WTM_WCR */
+#define WTM_WCR_WAIT (0x0008)
+#define WTM_WCR_DOZE (0x0004)
+#define WTM_WCR_HALTED (0x0002)
+#define WTM_WCR_EN (0x0001)
+
+/*********************************************************************
+* FlexCAN Module (CAN)
+*********************************************************************/
+/* Bit definitions and macros for CAN_CANMCR */
+#define CANMCR_MDIS (0x80000000)
+#define CANMCR_FRZ (0x40000000)
+#define CANMCR_HALT (0x10000000)
+#define CANMCR_NORDY (0x08000000)
+#define CANMCR_SOFTRST (0x02000000)
+#define CANMCR_FRZACK (0x01000000)
+#define CANMCR_SUPV (0x00800000)
+#define CANMCR_LPMACK (0x00100000)
+#define CANMCR_MAXMB(x) (((x)&0x0F))
+
+/* Bit definitions and macros for CAN_CANCTRL */
+#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x) (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x) (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x) (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK (0x00008000)
+#define CANCTRL_ERRMSK (0x00004000)
+#define CANCTRL_CLKSRC (0x00002000)
+#define CANCTRL_LPB (0x00001000)
+#define CANCTRL_SMP (0x00000080)
+#define CANCTRL_BOFFREC (0x00000040)
+#define CANCTRL_TSYNC (0x00000020)
+#define CANCTRL_LBUF (0x00000010)
+#define CANCTRL_LOM (0x00000008)
+#define CANCTRL_PROPSEG(x) (((x)&0x07))
+
+/* Bit definitions and macros for CAN_TIMER */
+#define TIMER_TIMER(x) ((x)&0xFFFF)
+
+/* Bit definitions and macros for CAN_RXGMASK */
+#define RXGMASK_MI(x) ((x)&0x1FFFFFFF)
+
+/* Bit definitions and macros for CAN_ERRCNT */
+#define ERRCNT_TXECTR(x) (((x)&0xFF))
+#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8)
+
+/* Bit definitions and macros for CAN_ERRSTAT */
+#define ERRSTAT_BITERR1 (0x00008000)
+#define ERRSTAT_BITERR0 (0x00004000)
+#define ERRSTAT_ACKERR (0x00002000)
+#define ERRSTAT_CRCERR (0x00001000)
+#define ERRSTAT_FRMERR (0x00000800)
+#define ERRSTAT_STFERR (0x00000400)
+#define ERRSTAT_TXWRN (0x00000200)
+#define ERRSTAT_RXWRN (0x00000100)
+#define ERRSTAT_IDLE (0x00000080)
+#define ERRSTAT_TXRX (0x00000040)
+#define ERRSTAT_FLT_BUSOFF (0x00000020)
+#define ERRSTAT_FLT_PASSIVE (0x00000010)
+#define ERRSTAT_FLT_ACTIVE (0x00000000)
+#define ERRSTAT_BOFFINT (0x00000004)
+#define ERRSTAT_ERRINT (0x00000002)
+
+/* Bit definitions and macros for CAN_IMASK */
+#define IMASK_BUF15M (0x00008000)
+#define IMASK_BUF14M (0x00004000)
+#define IMASK_BUF13M (0x00002000)
+#define IMASK_BUF12M (0x00001000)
+#define IMASK_BUF11M (0x00000800)
+#define IMASK_BUF10M (0x00000400)
+#define IMASK_BUF9M (0x00000200)
+#define IMASK_BUF8M (0x00000100)
+#define IMASK_BUF7M (0x00000080)
+#define IMASK_BUF6M (0x00000040)
+#define IMASK_BUF5M (0x00000020)
+#define IMASK_BUF4M (0x00000010)
+#define IMASK_BUF3M (0x00000008)
+#define IMASK_BUF2M (0x00000004)
+#define IMASK_BUF1M (0x00000002)
+#define IMASK_BUF0M (0x00000001)
+
+/* Bit definitions and macros for CAN_IFLAG */
+#define IFLAG_BUF15I (0x00008000)
+#define IFLAG_BUF14I (0x00004000)
+#define IFLAG_BUF13I (0x00002000)
+#define IFLAG_BUF12I (0x00001000)
+#define IFLAG_BUF11I (0x00000800)
+#define IFLAG_BUF10I (0x00000400)
+#define IFLAG_BUF9I (0x00000200)
+#define IFLAG_BUF8I (0x00000100)
+#define IFLAG_BUF7I (0x00000080)
+#define IFLAG_BUF6I (0x00000040)
+#define IFLAG_BUF5I (0x00000020)
+#define IFLAG_BUF4I (0x00000010)
+#define IFLAG_BUF3I (0x00000008)
+#define IFLAG_BUF2I (0x00000004)
+#define IFLAG_BUF1I (0x00000002)
+#define IFLAG_BUF0I (0x00000001)
+
+#endif /* mcf5235_h */
--- /dev/null
+/*
+ * Configuation settings for the Freescale MCF5329 FireEngine board.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5235EVB_H
+#define _M5235EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF523x /* define processor family */
+#define CONFIG_M5235 /* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_NET_MULTI 1
+# define CONFIG_MII 1
+# define CFG_DISCOVER_PHY
+# define CFG_RX_ETH_BUFFER 8
+# define CFG_FAULT_ECHO_LINK_DOWN
+
+# define CFG_FEC0_PINMUX 0
+# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define MCFFEC_TOUT_LOOP 50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CFG_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CFG_FAULT_ECHO_LINK_DOWN
+# define CFG_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CFG_DISCOVER_PHY */
+#endif
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C /* I2C with hw support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 80000
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x00000300
+#define CFG_IMMR CFG_MBAR
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */
+#define CONFIG_BOOTFILE "u-boot.bin"
+#ifdef CONFIG_MCFFEC
+# define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
+# define CONFIG_IPADDR 192.162.1.2
+# define CONFIG_NETMASK 255.255.255.0
+# define CONFIG_SERVERIP 192.162.1.1
+# define CONFIG_GATEWAYIP 192.162.1.1
+# define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif /* FEC_ENET */
+
+#define CONFIG_HOSTNAME M5235EVB
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=10000\0" \
+ "u-boot=u-boot.bin\0" \
+ "load=tftp ${loadaddr) ${u-boot}\0" \
+ "upd=run load; run prog\0" \
+ "prog=prot off ffe00000 ffe3ffff;" \
+ "era ffe00000 ffe3ffff;" \
+ "cp.b ${loadaddr} ffe00000 ${filesize};"\
+ "save\0" \
+ ""
+
+#define CONFIG_PRAM 512 /* 512 KB */
+#define CFG_PROMPT "-> "
+#define CFG_LONGHELP /* undef to save memory */
+
+#if defined(CONFIG_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE+0x20000)
+
+#define CFG_HZ 1000
+#define CFG_CLK 75000000
+#define CFG_CPU_CLK CFG_CLK * 2
+
+#define CFG_MBAR 0x40000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR 0x20000000
+#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL 0x21
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN 64*1024
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+# define CFG_FLASH_CFI_DRIVER 1
+# define CFG_FLASH_SIZE 0x800000 /* Max size that the board might have */
+#ifdef NORFLASH_PS32BIT
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#else
+# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#endif
+# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
+# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+#endif
+
+#define CFG_FLASH_BASE (CFG_CS0_BASE << 16)
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_IS_EMBEDDED 1
+#ifdef NORFLASH_PS32BIT
+# define CFG_ENV_OFFSET (0x8000)
+# define CFG_ENV_SIZE 0x4000
+# define CFG_ENV_SECT_SIZE 0x4000
+#else
+# define CFG_ENV_OFFSET (0x4000)
+# define CFG_ENV_SIZE 0x2000
+# define CFG_ENV_SECT_SIZE 0x2000
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - Available
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ * CS6 - Available
+ * CS7 - Available
+ */
+#ifdef NORFLASH_PS32BIT
+# define CFG_CS0_BASE 0xFFC0
+# define CFG_CS0_MASK 0x003f0001
+# define CFG_CS0_CTRL 0x1D00
+#else
+# define CFG_CS0_BASE 0xFFE0
+# define CFG_CS0_MASK 0x001f0001
+# define CFG_CS0_CTRL 0x1D80
+#endif
+
+#endif /* _M5329EVB_H */
projects / karo-tx-uboot.git / commitdiff