--- /dev/null
+/*
+ NXP TDA10048HN DVB OFDM demodulator driver
+
+ Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "dvb_frontend.h"
+#include "tda10048.h"
+
+#define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw"
+#define TDA10048_DEFAULT_FIRMWARE_SIZE 24878
+
+/* Register name definitions */
+#define TDA10048_IDENTITY 0x00
+#define TDA10048_VERSION 0x01
+#define TDA10048_DSP_CODE_CPT 0x0C
+#define TDA10048_DSP_CODE_IN 0x0E
+#define TDA10048_IN_CONF1 0x10
+#define TDA10048_IN_CONF2 0x11
+#define TDA10048_IN_CONF3 0x12
+#define TDA10048_OUT_CONF1 0x14
+#define TDA10048_OUT_CONF2 0x15
+#define TDA10048_OUT_CONF3 0x16
+#define TDA10048_AUTO 0x18
+#define TDA10048_SYNC_STATUS 0x1A
+#define TDA10048_CONF_C4_1 0x1E
+#define TDA10048_CONF_C4_2 0x1F
+#define TDA10048_CODE_IN_RAM 0x20
+#define TDA10048_CHANNEL_INFO_1_R 0x22
+#define TDA10048_CHANNEL_INFO_2_R 0x23
+#define TDA10048_CHANNEL_INFO1 0x24
+#define TDA10048_CHANNEL_INFO2 0x25
+#define TDA10048_TIME_ERROR_R 0x26
+#define TDA10048_TIME_ERROR 0x27
+#define TDA10048_FREQ_ERROR_LSB_R 0x28
+#define TDA10048_FREQ_ERROR_MSB_R 0x29
+#define TDA10048_FREQ_ERROR_LSB 0x2A
+#define TDA10048_FREQ_ERROR_MSB 0x2B
+#define TDA10048_IT_SEL 0x30
+#define TDA10048_IT_STAT 0x32
+#define TDA10048_DSP_AD_LSB 0x3C
+#define TDA10048_DSP_AD_MSB 0x3D
+#define TDA10048_DSP_REF_LSB 0x3E
+#define TDA10048_DSP_REF_MSB 0x3F
+#define TDA10048_CONF_TRISTATE1 0x44
+#define TDA10048_CONF_TRISTATE2 0x45
+#define TDA10048_CONF_POLARITY 0x46
+#define TDA10048_GPIO_SP_DS0 0x48
+#define TDA10048_GPIO_SP_DS1 0x49
+#define TDA10048_GPIO_SP_DS2 0x4A
+#define TDA10048_GPIO_SP_DS3 0x4B
+#define TDA10048_GPIO_OUT_SEL 0x4C
+#define TDA10048_GPIO_SELECT 0x4D
+#define TDA10048_IC_MODE 0x4E
+#define TDA10048_CONF_XO 0x50
+#define TDA10048_CONF_PLL1 0x51
+#define TDA10048_CONF_PLL2 0x52
+#define TDA10048_CONF_PLL3 0x53
+#define TDA10048_CONF_ADC 0x54
+#define TDA10048_CONF_ADC_2 0x55
+#define TDA10048_CONF_C1_1 0x60
+#define TDA10048_CONF_C1_3 0x62
+#define TDA10048_AGC_CONF 0x70
+#define TDA10048_AGC_THRESHOLD_LSB 0x72
+#define TDA10048_AGC_THRESHOLD_MSB 0x73
+#define TDA10048_AGC_RENORM 0x74
+#define TDA10048_AGC_GAINS 0x76
+#define TDA10048_AGC_TUN_MIN 0x78
+#define TDA10048_AGC_TUN_MAX 0x79
+#define TDA10048_AGC_IF_MIN 0x7A
+#define TDA10048_AGC_IF_MAX 0x7B
+#define TDA10048_AGC_TUN_LEVEL 0x7E
+#define TDA10048_AGC_IF_LEVEL 0x7F
+#define TDA10048_DIG_AGC_LEVEL 0x81
+#define TDA10048_FREQ_PHY2_LSB 0x86
+#define TDA10048_FREQ_PHY2_MSB 0x87
+#define TDA10048_TIME_INVWREF_LSB 0x88
+#define TDA10048_TIME_INVWREF_MSB 0x89
+#define TDA10048_TIME_WREF_LSB 0x8A
+#define TDA10048_TIME_WREF_MID1 0x8B
+#define TDA10048_TIME_WREF_MID2 0x8C
+#define TDA10048_TIME_WREF_MSB 0x8D
+#define TDA10048_NP_OUT 0xA2
+#define TDA10048_CELL_ID_LSB 0xA4
+#define TDA10048_CELL_ID_MSB 0xA5
+#define TDA10048_EXTTPS_ODD 0xAA
+#define TDA10048_EXTTPS_EVEN 0xAB
+#define TDA10048_TPS_LENGTH 0xAC
+#define TDA10048_FREE_REG_1 0xB2
+#define TDA10048_FREE_REG_2 0xB3
+#define TDA10048_CONF_C3_1 0xC0
+#define TDA10048_CYBER_CTRL 0xC2
+#define TDA10048_CBER_NMAX_LSB 0xC4
+#define TDA10048_CBER_NMAX_MSB 0xC5
+#define TDA10048_CBER_LSB 0xC6
+#define TDA10048_CBER_MSB 0xC7
+#define TDA10048_VBER_LSB 0xC8
+#define TDA10048_VBER_MID 0xC9
+#define TDA10048_VBER_MSB 0xCA
+#define TDA10048_CYBER_LUT 0xCC
+#define TDA10048_UNCOR_CTRL 0xCD
+#define TDA10048_UNCOR_CPT_LSB 0xCE
+#define TDA10048_UNCOR_CPT_MSB 0xCF
+#define TDA10048_SOFT_IT_C3 0xD6
+#define TDA10048_CONF_TS2 0xE0
+#define TDA10048_CONF_TS1 0xE1
+
+static unsigned int debug;
+
+#define dprintk(level, fmt, arg...)\
+ do { if (debug >= level)\
+ printk(KERN_DEBUG "tda10048: " fmt, ## arg);\
+ } while (0)
+
+struct tda10048_state {
+
+ struct i2c_adapter *i2c;
+
+ /* configuration settings */
+ const struct tda10048_config *config;
+ struct dvb_frontend frontend;
+
+ int fwloaded;
+};
+
+static struct init_tab {
+ u8 reg;
+ u16 data;
+} init_tab[] = {
+ { TDA10048_CONF_PLL1, 0x08 },
+ { TDA10048_CONF_ADC_2, 0x00 },
+ { TDA10048_CONF_C4_1, 0x00 },
+ { TDA10048_CONF_PLL1, 0x0f },
+ { TDA10048_CONF_PLL2, 0x0a },
+ { TDA10048_CONF_PLL3, 0x43 },
+ { TDA10048_FREQ_PHY2_LSB, 0x02 },
+ { TDA10048_FREQ_PHY2_MSB, 0x0a },
+ { TDA10048_TIME_WREF_LSB, 0xbd },
+ { TDA10048_TIME_WREF_MID1, 0xe4 },
+ { TDA10048_TIME_WREF_MID2, 0xa8 },
+ { TDA10048_TIME_WREF_MSB, 0x02 },
+ { TDA10048_TIME_INVWREF_LSB, 0x04 },
+ { TDA10048_TIME_INVWREF_MSB, 0x06 },
+ { TDA10048_CONF_C4_1, 0x00 },
+ { TDA10048_CONF_C1_1, 0xa8 },
+ { TDA10048_AGC_CONF, 0x16 },
+ { TDA10048_CONF_C1_3, 0x0b },
+ { TDA10048_AGC_TUN_MIN, 0x00 },
+ { TDA10048_AGC_TUN_MAX, 0xff },
+ { TDA10048_AGC_IF_MIN, 0x00 },
+ { TDA10048_AGC_IF_MAX, 0xff },
+ { TDA10048_AGC_THRESHOLD_MSB, 0x00 },
+ { TDA10048_AGC_THRESHOLD_LSB, 0x70 },
+ { TDA10048_CYBER_CTRL, 0x38 },
+ { TDA10048_AGC_GAINS, 0x12 },
+ { TDA10048_CONF_XO, 0x00 },
+ { TDA10048_CONF_TS1, 0x07 },
+ { TDA10048_IC_MODE, 0x00 },
+ { TDA10048_CONF_TS2, 0xc0 },
+ { TDA10048_CONF_TRISTATE1, 0x21 },
+ { TDA10048_CONF_TRISTATE2, 0x00 },
+ { TDA10048_CONF_POLARITY, 0x00 },
+ { TDA10048_CONF_C4_2, 0x04 },
+ { TDA10048_CONF_ADC, 0x60 },
+ { TDA10048_CONF_ADC_2, 0x10 },
+ { TDA10048_CONF_ADC, 0x60 },
+ { TDA10048_CONF_ADC_2, 0x00 },
+ { TDA10048_CONF_C1_1, 0xa8 },
+ { TDA10048_UNCOR_CTRL, 0x00 },
+ { TDA10048_CONF_C4_2, 0x04 },
+};
+
+static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
+{
+ int ret;
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = {
+ .addr = state->config->demod_address,
+ .flags = 0, .buf = buf, .len = 2 };
+
+ dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data);
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+
+ if (ret != 1)
+ printk("%s: writereg error (ret == %i)\n", __func__, ret);
+
+ return (ret != 1) ? -1 : 0;
+}
+
+static u8 tda10048_readreg(struct tda10048_state *state, u8 reg)
+{
+ int ret;
+ u8 b0 [] = { reg };
+ u8 b1 [] = { 0 };
+ struct i2c_msg msg [] = {
+ { .addr = state->config->demod_address,
+ .flags = 0, .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address,
+ .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+
+ dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg);
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2)
+ printk(KERN_ERR "%s: readreg error (ret == %i)\n",
+ __func__, ret);
+
+ return b1[0];
+}
+
+static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg,
+ u8 *data, u16 len)
+{
+ int ret = -EREMOTEIO;
+ struct i2c_msg msg;
+ u8 *buf;
+
+ dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len);
+
+ buf = kmalloc(len + 1, GFP_KERNEL);
+ if (buf == NULL) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ *buf = reg;
+ memcpy(buf + 1, data, len);
+
+ msg.addr = state->config->demod_address;
+ msg.flags = 0;
+ msg.buf = buf;
+ msg.len = len + 1;
+
+ dprintk(2, "%s(): write len = %d\n",
+ __func__, msg.len);
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ printk(KERN_ERR "%s(): writereg error err %i\n",
+ __func__, ret);
+ ret = -EREMOTEIO;
+ }
+
+error:
+ kfree(buf);
+
+ return ret;
+}
+
+static int tda10048_firmware_upload(struct dvb_frontend *fe)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ const struct firmware *fw;
+ int ret;
+ int pos = 0;
+ int cnt;
+ u8 wlen = state->config->fwbulkwritelen;
+
+ if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50))
+ wlen = TDA10048_BULKWRITE_200;
+
+ /* request the firmware, this will block and timeout */
+ printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n",
+ __func__,
+ TDA10048_DEFAULT_FIRMWARE);
+
+ ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE,
+ &state->i2c->dev);
+ if (ret) {
+ printk(KERN_ERR "%s: Upload failed. (file not found?)\n",
+ __func__);
+ return -EIO;
+ } else {
+ printk(KERN_INFO "%s: firmware read %Zu bytes.\n",
+ __func__,
+ fw->size);
+ ret = 0;
+ }
+
+ if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
+ printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
+ return -EIO;
+ } else {
+ printk(KERN_INFO "%s: firmware uploading\n", __func__);
+
+ /* Soft reset */
+ tda10048_writereg(state, TDA10048_CONF_TRISTATE1,
+ tda10048_readreg(state, TDA10048_CONF_TRISTATE1)
+ & 0xfe);
+ tda10048_writereg(state, TDA10048_CONF_TRISTATE1,
+ tda10048_readreg(state, TDA10048_CONF_TRISTATE1)
+ | 0x01);
+
+ /* Put the demod into host download mode */
+ tda10048_writereg(state, TDA10048_CONF_C4_1,
+ tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9);
+
+ /* Boot the DSP */
+ tda10048_writereg(state, TDA10048_CONF_C4_1,
+ tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08);
+
+ /* Prepare for download */
+ tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0);
+
+ /* Download the firmware payload */
+ while (pos < fw->size) {
+
+ if ((fw->size - pos) > wlen)
+ cnt = wlen;
+ else
+ cnt = fw->size - pos;
+
+ tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN,
+ &fw->data[pos], cnt);
+
+ pos += cnt;
+ }
+
+ ret = -EIO;
+ /* Wait up to 250ms for the DSP to boot */
+ for (cnt = 0; cnt < 250 ; cnt += 10) {
+
+ msleep(10);
+
+ if (tda10048_readreg(state, TDA10048_SYNC_STATUS)
+ & 0x40) {
+ ret = 0;
+ break;
+ }
+ }
+ }
+
+ release_firmware(fw);
+
+ if (ret == 0) {
+ printk(KERN_INFO "%s: firmware uploaded\n", __func__);
+ state->fwloaded = 1;
+ } else
+ printk(KERN_ERR "%s: firmware upload failed\n", __func__);
+
+ return ret;
+}
+
+static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s(%d)\n", __func__, inversion);
+
+ if (inversion == TDA10048_INVERSION_ON)
+ tda10048_writereg(state, TDA10048_CONF_C1_1,
+ tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20);
+ else
+ tda10048_writereg(state, TDA10048_CONF_C1_1,
+ tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf);
+
+ return 0;
+}
+
+/* Retrieve the demod settings */
+static int tda10048_get_tps(struct tda10048_state *state,
+ struct dvb_ofdm_parameters *p)
+{
+ u8 val;
+
+ /* Make sure the TPS regs are valid */
+ if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01))
+ return -EAGAIN;
+
+ val = tda10048_readreg(state, TDA10048_OUT_CONF2);
+ switch ((val & 0x60) >> 5) {
+ case 0: p->constellation = QPSK; break;
+ case 1: p->constellation = QAM_16; break;
+ case 2: p->constellation = QAM_64; break;
+ }
+ switch ((val & 0x18) >> 3) {
+ case 0: p->hierarchy_information = HIERARCHY_NONE; break;
+ case 1: p->hierarchy_information = HIERARCHY_1; break;
+ case 2: p->hierarchy_information = HIERARCHY_2; break;
+ case 3: p->hierarchy_information = HIERARCHY_4; break;
+ }
+ switch (val & 0x07) {
+ case 0: p->code_rate_HP = FEC_1_2; break;
+ case 1: p->code_rate_HP = FEC_2_3; break;
+ case 2: p->code_rate_HP = FEC_3_4; break;
+ case 3: p->code_rate_HP = FEC_5_6; break;
+ case 4: p->code_rate_HP = FEC_7_8; break;
+ }
+
+ val = tda10048_readreg(state, TDA10048_OUT_CONF3);
+ switch (val & 0x07) {
+ case 0: p->code_rate_LP = FEC_1_2; break;
+ case 1: p->code_rate_LP = FEC_2_3; break;
+ case 2: p->code_rate_LP = FEC_3_4; break;
+ case 3: p->code_rate_LP = FEC_5_6; break;
+ case 4: p->code_rate_LP = FEC_7_8; break;
+ }
+
+ val = tda10048_readreg(state, TDA10048_OUT_CONF1);
+ switch ((val & 0x0c) >> 2) {
+ case 0: p->guard_interval = GUARD_INTERVAL_1_32; break;
+ case 1: p->guard_interval = GUARD_INTERVAL_1_16; break;
+ case 2: p->guard_interval = GUARD_INTERVAL_1_8; break;
+ case 3: p->guard_interval = GUARD_INTERVAL_1_4; break;
+ }
+ switch (val & 0x02) {
+ case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break;
+ case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break;
+ }
+
+ return 0;
+}
+
+static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ dprintk(1, "%s(%d)\n", __func__, enable);
+
+ if (enable)
+ return tda10048_writereg(state, TDA10048_CONF_C4_1,
+ tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02);
+ else
+ return tda10048_writereg(state, TDA10048_CONF_C4_1,
+ tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd);
+}
+
+static int tda10048_output_mode(struct dvb_frontend *fe, int serial)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ dprintk(1, "%s(%d)\n", __func__, serial);
+
+ /* Ensure pins are out of tri-state */
+ tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21);
+ tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00);
+
+ if (serial) {
+ tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20);
+ tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0);
+ } else {
+ tda10048_writereg(state, TDA10048_IC_MODE, 0x00);
+ tda10048_writereg(state, TDA10048_CONF_TS2, 0x01);
+ }
+
+ return 0;
+}
+
+/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
+/* TODO: Support manual tuning with specific params */
+static int tda10048_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency);
+
+ if (fe->ops.tuner_ops.set_params) {
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ fe->ops.tuner_ops.set_params(fe, p);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ /* Enable demod TPS auto detection and begin acquisition */
+ tda10048_writereg(state, TDA10048_AUTO, 0x57);
+
+ return 0;
+}
+
+/* Establish sane defaults and load firmware. */
+static int tda10048_init(struct dvb_frontend *fe)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ int ret = 0, i;
+
+ dprintk(1, "%s()\n", __func__);
+
+ /* Apply register defaults */
+ for (i = 0; i < ARRAY_SIZE(init_tab); i++)
+ tda10048_writereg(state, init_tab[i].reg, init_tab[i].data);
+
+ if (state->fwloaded == 0)
+ ret = tda10048_firmware_upload(fe);
+
+ /* Set either serial or parallel */
+ tda10048_output_mode(fe, state->config->output_mode);
+
+ /* set inversion */
+ tda10048_set_inversion(fe, state->config->inversion);
+
+ /* Ensure we leave the gate closed */
+ tda10048_i2c_gate_ctrl(fe, 0);
+
+ return ret;
+}
+
+static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ u8 reg;
+
+ *status = 0;
+
+ reg = tda10048_readreg(state, TDA10048_SYNC_STATUS);
+
+ dprintk(1, "%s() status =0x%02x\n", __func__, reg);
+
+ if (reg & 0x02)
+ *status |= FE_HAS_CARRIER;
+
+ if (reg & 0x04)
+ *status |= FE_HAS_SIGNAL;
+
+ if (reg & 0x08) {
+ *status |= FE_HAS_LOCK;
+ *status |= FE_HAS_VITERBI;
+ *status |= FE_HAS_SYNC;
+ }
+
+ return 0;
+}
+
+static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s()\n", __func__);
+
+ /* TODO: A reset may be required here */
+ *ber = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 |
+ tda10048_readreg(state, TDA10048_CBER_LSB);
+
+ return 0;
+}
+
+static int tda10048_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ u16 v;
+
+ dprintk(1, "%s()\n", __func__);
+
+ v = tda10048_readreg(state, TDA10048_NP_OUT);
+ if (v == 0)
+ *signal_strength = 100;
+ else {
+ /* TODO: Apply .db math for correct values */
+ *signal_strength = v;
+ }
+
+ return 0;
+}
+
+static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s()\n", __func__);
+
+ /* TODO: This result should be the same as signal strength */
+ *snr = tda10048_readreg(state, TDA10048_NP_OUT);
+
+ return 0;
+}
+
+static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s()\n", __func__);
+
+ *ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 |
+ tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB);
+
+ return 0;
+}
+
+static int tda10048_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+
+ dprintk(1, "%s()\n", __func__);
+
+ p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1)
+ & 0x20 ? INVERSION_ON : INVERSION_OFF;
+
+ return tda10048_get_tps(state, &p->u.ofdm);
+}
+
+static int tda10048_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void tda10048_release(struct dvb_frontend *fe)
+{
+ struct tda10048_state *state = fe->demodulator_priv;
+ dprintk(1, "%s()\n", __func__);
+ kfree(state);
+}
+
+static struct dvb_frontend_ops tda10048_ops;
+
+struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct tda10048_state *state = NULL;
+
+ dprintk(1, "%s()\n", __func__);
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ state->fwloaded = 0;
+
+ /* check if the demod is present */
+ if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048)
+ goto error;
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &tda10048_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ /* Leave the gate closed */
+ tda10048_i2c_gate_ctrl(&state->frontend, 0);
+
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(tda10048_attach);
+
+static struct dvb_frontend_ops tda10048_ops = {
+
+ .info = {
+ .name = "NXP TDA10048HN DVB-T",
+ .type = FE_OFDM,
+ .frequency_min = 177000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166666,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
+ },
+
+ .release = tda10048_release,
+ .init = tda10048_init,
+ .i2c_gate_ctrl = tda10048_i2c_gate_ctrl,
+ .set_frontend = tda10048_set_frontend,
+ .get_frontend = tda10048_get_frontend,
+ .get_tune_settings = tda10048_get_tune_settings,
+ .read_status = tda10048_read_status,
+ .read_ber = tda10048_read_ber,
+ .read_signal_strength = tda10048_read_signal_strength,
+ .read_snr = tda10048_read_snr,
+ .read_ucblocks = tda10048_read_ucblocks,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable verbose debug messages");
+
+MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
projects / karo-tx-linux.git / commitdiff