+++ /dev/null
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _INTEL_SAS_H_
-#define _INTEL_SAS_H_
-
-/**
- * This file contains all of the definitions relating to structures, constants,
- * etc. defined by the SAS specification.
- *
- *
- */
-#include <linux/kernel.h>
-#include "intel_scsi.h"
-
-/**
- * struct sci_sas_address - This structure depicts how a SAS address is
- * represented by SCI.
- *
- *
- */
-struct sci_sas_address {
- /**
- * This member contains the higher 32-bits of the SAS address.
- */
- u32 high;
-
- /**
- * This member contains the lower 32-bits of the SAS address.
- */
- u32 low;
-
-};
-
-/**
- * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
- * specification defined task attribute values for a command information
- * unit.
- *
- *
- */
-enum sci_sas_task_attribute {
- SCI_SAS_SIMPLE_ATTRIBUTE = 0,
- SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1,
- SCI_SAS_ORDERED_ATTRIBUTE = 2,
- SCI_SAS_ACA_ATTRIBUTE = 4,
-};
-
-/**
- * enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS
- * specification defined task management functions.
- *
- * This HARD_RESET function listed here is not actually defined as a task
- * management function in the industry standard.
- */
-enum sci_sas_task_mgmt_function {
- SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK,
- SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET,
- SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET,
- SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET,
- SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET,
- SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA,
- SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK,
- SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET,
- SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION,
- SCI_SAS_HARD_RESET = 0xFF
-};
-
-
-/**
- * enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification
- * defined SSP frame types.
- *
- *
- */
-enum sci_sas_frame_type {
- SCI_SAS_DATA_FRAME = 0x01,
- SCI_SAS_XFER_RDY_FRAME = 0x05,
- SCI_SAS_COMMAND_FRAME = 0x06,
- SCI_SAS_RESPONSE_FRAME = 0x07,
- SCI_SAS_TASK_FRAME = 0x16
-};
-
-#define PHY_OPERATION_NOP 0x00
-#define PHY_OPERATION_LINK_RESET 0x01
-#define PHY_OPERATION_HARD_RESET 0x02
-#define PHY_OPERATION_DISABLE 0x03
-#define PHY_OPERATION_CLEAR_ERROR_LOG 0x05
-#define PHY_OPERATION_CLEAR_AFFILIATION 0x06
-
-#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00
-#define NPLR_PHY_DISABLED 0x01
-#define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02
-#define NPLR_PHY_ENABLED_SATA_HOLD 0x03
-#define NPLR_PHY_ENABLED_1_5G 0x08
-#define NPLR_PHY_ENABLED_3_0G 0x09
-
-/* SMP Function Result values. */
-#define SMP_RESULT_FUNCTION_ACCEPTED 0x00
-#define SMP_RESULT_UNKNOWN_FUNCTION 0x01
-#define SMP_RESULT_FUNCTION_FAILED 0x02
-#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03
-#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04
-#define SMP_RESULT_BUSY 0x05
-#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06
-#define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10
-#define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11
-#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12
-#define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13
-#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14
-#define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15
-#define SMP_RESULT_PHY_VACANT 0x16
-
-/* Attached Device Types */
-#define SMP_NO_DEVICE_ATTACHED 0
-#define SMP_END_DEVICE_ONLY 1
-#define SMP_EDGE_EXPANDER_DEVICE 2
-#define SMP_FANOUT_EXPANDER_DEVICE 3
-
-/* Expander phy routine attribute */
-#define DIRECT_ROUTING_ATTRIBUTE 0
-#define SUBTRACTIVE_ROUTING_ATTRIBUTE 1
-#define TABLE_ROUTING_ATTRIBUTE 2
-
-#endif /* _INTEL_SAS_H_ */
-
+++ /dev/null
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * This file defines all of the SCSI related constants, enumerations, and
- * types. Please note that this file does not necessarily contain an
- * exhaustive list of all constants, commands, sub-commands, etc.
- *
- *
- */
-
-#ifndef _SCSI_H__
-#define _SCSI_H__
-
-
-/*
- * ******************************************************************************
- * * C O N S T A N T S A N D M A C R O S
- * ****************************************************************************** */
-
-/**
- * enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the
- * constants to be used for SCSI task management request codes. SAM does
- * not specify any particular values for these codes so constants used here
- * are the same as those specified in SAS.
- *
- *
- */
-enum scsi_task_mgmt_request_codes {
- SCSI_TASK_REQUEST_ABORT_TASK = 0x01,
- SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02,
- SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04,
- SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08,
- SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10,
- SCSI_TASK_REQUEST_CLEAR_ACA = 0x40,
- SCSI_TASK_REQUEST_QUERY_TASK = 0x80,
- SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81,
- SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82,
-
-};
-
-/**
- * enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the
- * SCSI task management response codes.
- *
- *
- */
-enum scsi_task_mgmt_response_codes {
- SCSI_TASK_MGMT_FUNC_COMPLETE = 0,
- SCSI_INVALID_FRAME = 2,
- SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4,
- SCSI_TASK_MGMT_FUNC_FAILED = 5,
- SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8,
- SCSI_INVALID_LUN = 9
-};
-
-/**
- * enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense
- * data responses as per SPC-3.
- *
- *
- */
-enum scsi_sense_response_code {
- SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70,
- SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71,
- SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72,
- SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73
-
-};
-
-/*
- * This constant represents the valid bit located in byte 0 of a FIXED
- * format sense data. */
-#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80
-
-#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18
-
-/* This value is used in the DATAPRES field of the SCSI Response IU. */
-#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02
-
-/**
- *
- *
- * SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key
- * constants
- */
-#define SCSI_SENSE_NO_SENSE 0x00
-#define SCSI_SENSE_RECOVERED_ERROR 0x01
-#define SCSI_SENSE_NOT_READY 0x02
-#define SCSI_SENSE_MEDIUM_ERROR 0x03
-#define SCSI_SENSE_HARDWARE_ERROR 0x04
-#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
-#define SCSI_SENSE_UNIT_ATTENTION 0x06
-#define SCSI_SENSE_DATA_PROTECT 0x07
-#define SCSI_SENSE_BLANK_CHECK 0x08
-#define SCSI_SENSE_VENDOR_SPECIFIC 0x09
-#define SCSI_SENSE_COPY_ABORTED 0x0A
-#define SCSI_SENSE_ABORTED_COMMAND 0x0B
-#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D
-#define SCSI_SENSE_MISCOMPARE 0x0E
-
-/**
- *
- *
- * SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI
- * protocol additional sense code constants.
- */
-#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00
-#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04
-#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04
-#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04
-#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05
-#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11
-#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20
-#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21
-#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
-#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26
-#define SCSI_ASC_WRITE_PROTECTED 0x27
-#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28
-#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39
-#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A
-#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44
-#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47
-#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A
-#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C
-#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
-#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D
-#define SCSI_ASC_POWER_STATE_CHANGE 0x5E
-#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40
-#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67
-
-/**
- *
- *
- * SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the
- * used SCSI protocol additional sense code qualifier constants.
- */
-#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00
-#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00
-#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00
-#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00
-#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00
-#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
-#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00
-#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00
-#define SCSI_ASCQ_WRITE_PROTECTED 0x00
-#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00
-#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00
-#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00
-#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01
-#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02
-#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03
-#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04
-#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09
-#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10
-#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03
-#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04
-#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42
-#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43
-#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B
-#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04
-
-
-
-/**
- *
- *
- * SCSI_STATUS_CODES These constants define all of the used SCSI status values.
- */
-#define SCSI_STATUS_GOOD 0x00
-#define SCSI_STATUS_CHECK_CONDITION 0x02
-#define SCSI_STATUS_CONDITION_MET 0x04
-#define SCSI_STATUS_BUSY 0x08
-#define SCSI_STATUS_TASKFULL 0x28
-#define SCSI_STATUS_ACA 0x30
-#define SCSI_STATUS_ABORT 0x40
-
-/**
- *
- *
- * SCSI_OPERATION_CODES These constants delineate all of the SCSI
- * command/operation codes.
- */
-#define SCSI_INQUIRY 0x12
-#define SCSI_READ_CAPACITY_10 0x25
-#define SCSI_SERVICE_ACTION_IN_16 0x9E
-#define SCSI_TEST_UNIT_READY 0x00
-#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_SYNCHRONIZE_CACHE_10 0x35
-#define SCSI_SYNCHRONIZE_CACHE_16 0x91
-#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_REPORT_LUNS 0xA0
-#define SCSI_REASSIGN_BLOCKS 0x07
-#define SCSI_READ_6 0x08
-#define SCSI_READ_10 0x28
-#define SCSI_READ_12 0xA8
-#define SCSI_READ_16 0x88
-#define SCSI_WRITE_6 0x0A
-#define SCSI_WRITE_10 0x2A
-#define SCSI_WRITE_12 0xAA
-#define SCSI_WRITE_16 0x8A
-#define SCSI_VERIFY_10 0x2F
-#define SCSI_VERIFY_12 0xAF
-#define SCSI_VERIFY_16 0x8F
-#define SCSI_SEEK_6 0x01
-#define SCSI_SEEK_10 0x02
-#define SCSI_WRITE_VERIFY 0x2E
-#define SCSI_FORMAT_UNIT 0x04
-#define SCSI_READ_BUFFER 0x3C
-#define SCSI_WRITE_BUFFER 0x3B
-#define SCSI_SEND_DIAGNOSTIC 0x1D
-#define SCSI_RECEIVE_DIAGNOSTIC 0x1C
-#define SCSI_MODE_SENSE_6 0x1A
-#define SCSI_MODE_SENSE_10 0x5A
-#define SCSI_MODE_SELECT_6 0x15
-#define SCSI_MODE_SELECT_10 0x55
-#define SCSI_MAINTENANCE_IN 0xA3
-#define SCSI_LOG_SENSE 0x4D
-#define SCSI_LOG_SELECT 0x4C
-#define SCSI_RESERVE_6 0x16
-#define SCSI_RESERVE_10 0x56
-#define SCSI_RELEASE_6 0x17
-#define SCSI_RELEASE_10 0x57
-#define SCSI_ATA_PASSTHRU_12 0xA1
-#define SCSI_ATA_PASSTHRU_16 0x85
-#define SCSI_WRITE_LONG_10 0x3F
-#define SCSI_WRITE_LONG_16 0x9F
-#define SCSI_PERSISTENT_RESERVE_IN 0x5E
-#define SCSI_PERSISTENT_RESERVE_OUT 0x5F
-
-/**
- *
- *
- * SCSI_SERVICE_ACTION_IN_CODES Service action in operations.
- */
-#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10
-
-#define SCSI_SERVICE_ACTION_MASK 0x1f
-
-/**
- *
- *
- * SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes.
- */
-#define SCSI_REPORT_TASK_MGMT 0x0D
-#define SCSI_REPORT_OP_CODES 0x0C
-
-/**
- *
- *
- * SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode
- * Page control values.
- */
-#define SCSI_MODE_SENSE_PC_CURRENT 0x0
-#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1
-#define SCSI_MODE_SENSE_PC_DEFAULT 0x2
-#define SCSI_MODE_SENSE_PC_SAVED 0x3
-
-#define SCSI_MODE_SENSE_PC_SHIFT 0x06
-#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F
-#define SCSI_MODE_SENSE_DBD_ENABLE 0x08
-#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10
-
-/**
- *
- *
- * SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode
- * Page codes.
- */
-#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01
-#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02
-#define SCSI_MODE_PAGE_CACHING 0x08
-#define SCSI_MODE_PAGE_CONTROL 0x0A
-#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19
-#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A
-#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C
-#define SCSI_MODE_PAGE_ALL_PAGES 0x3F
-
-#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF
-#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0
-#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1
-#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04
-#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20
-#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08
-#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10
-#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1
-#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2
-
-#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4
-#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8
-#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8
-#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16
-
-#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08
-#define SCSI_MODE_PAGE_19_SAS_ID 0x6
-#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1
-#define SCSI_MODE_PAGE_19_SUB1_PC 0x59
-
-#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00
-
-/* Mode Select constrains related masks value */
-#define SCSI_MODE_SELECT_PF_BIT 0x1
-#define SCSI_MODE_SELECT_PF_MASK 0x10
-#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6
-#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F
-#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40
-#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80
-#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40
-#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F
-#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1
-#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47
-
-
-#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04
-#define SCSI_MOVE_FUA_BIT_ENABLE 0x08
-#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01
-#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8
-#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32
-
-/* Inquiry constants */
-#define SCSI_INQUIRY_EVPD_ENABLE 0x01
-#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02
-#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00
-#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80
-#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83
-#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89
-#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1
-#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C
-#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */
-
-#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */
-
-/** Defines the log page codes that are use in gathing Smart data
- */
-#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00
-#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F
-#define SCSI_LOG_PAGE_SELF_TEST 0x10
-
-/**
- *
- *
- * SCSI_INQUIRY_VPD The following are constants used with vital product data
- * inquiry pages. Values are already shifted into the proper nibble location.
- */
-#define SCSI_PIV_ENABLE 0x80
-#define SCSI_LUN_ASSOCIATION 0x00
-#define SCSI_TARGET_PORT_ASSOCIATION 0x10
-
-#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00
-#define SCSI_NAA_IDENTIFIER_TYPE 0x03
-
-#define SCSI_T10_IDENTIFIER_TYPE 0x01
-#define SCSI_BINARY_CODE_SET 0x01
-#define SCSI_ASCII_CODE_SET 0x02
-#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00
-#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60
-
-#define SCSI_VERIFY_BYTCHK_ENABLED 0x02
-
-#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02
-/**
- *
- *
- * SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop
- * Unit command Power Condition codes.
- */
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB
-
-#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1
-#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0
-
-#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1
-#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0
-
-#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2
-#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1
-
-#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4
-#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2
-
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0
-
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4
-
-#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0
-#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6
-
-#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F
-#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0
-
-/**
- *
- *
- * MRIE - Method of reporting informational exceptions codes
- */
-#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0
-#define ASYNCHRONOUS_EVENT_REPORTING 0x1
-#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2
-#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3
-#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4
-#define GENERATE_NO_SENSE 0x5
-#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6
-
-#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08
-
-/* Reassign Blocks masks */
-#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02
-#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01
-
-#endif /* _SCSI_H_ */
-
projects / karo-tx-linux.git / commitdiff