ixgbe: check for WoL support in single function

This patch consolidates the case logic for checking whether a device supports
WoL into a single place. Previously ethtool and probe used similar logic that
was copied and maintained separately. This patch encapsulates the core logic
into a function so that a user only has to update one place.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 74e192107f9ae6a204ef538d322a6975daba5962..8e082f257efb5f59a4ceccac7f947e819fda71a8 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -600,6 +600,8 @@ extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
                                   struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+                              u16 subdevice_id);
 extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
 extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
                                         struct ixgbe_adapter *,

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 31a2bf76a3461f3ce307844592eb23970ebd1f43..27225ff44e2f65b272e21f9ffc1b50ddfbea52af 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1969,53 +1969,12 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
                                struct ethtool_wolinfo *wol)
 {
        struct ixgbe_hw *hw = &adapter->hw;
-       int retval = 1;
-       u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
-
-       /* WOL not supported except for the following */
-       switch(hw->device_id) {
-       case IXGBE_DEV_ID_82599_SFP:
-               /* Only these subdevices could supports WOL */
-               switch (hw->subsystem_device_id) {
-               case IXGBE_SUBDEV_ID_82599_560FLR:
-                       /* only support first port */
-                       if (hw->bus.func != 0) {
-                               wol->supported = 0;
-                               break;
-                       }
-               case IXGBE_SUBDEV_ID_82599_SFP:
-                       retval = 0;
-                       break;
-               default:
-                       wol->supported = 0;
-                       break;
-               }
-               break;
-       case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
-               /* All except this subdevice support WOL */
-               if (hw->subsystem_device_id ==
-                   IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
-                       wol->supported = 0;
-                       break;
-               }
-               retval = 0;
-               break;
-       case IXGBE_DEV_ID_82599_KX4:
-               retval = 0;
-               break;
-       case IXGBE_DEV_ID_X540T:
-               /* check eeprom to see if enabled wol */
-               if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
-                   ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
-                    (hw->bus.func == 0))) {
-                       retval = 0;
-                       break;
-               }
+       int retval = 0;
 
-               /* All others not supported */
-               wol->supported = 0;
-               break;
-       default:
+       /* WOL not supported for all devices */
+       if (!ixgbe_wol_supported(adapter, hw->device_id,
+                                hw->subsystem_device_id)) {
+               retval = 1;
                wol->supported = 0;
        }
 

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 7c4325ec22c29ad7f97af75bcfa7382c4ce29cf8..aa29edb950f28136202fae5866e23a58ec68d0ec 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6598,7 +6598,7 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev,
        /* Turn off LRO if not RSC capable */
        if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
                features &= ~NETIF_F_LRO;
-       
+
 
        return features;
 }
@@ -6785,6 +6785,57 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 #endif /* CONFIG_PCI_IOV */
 }
 
+/**
+ * ixgbe_wol_supported - Check whether device supports WoL
+ * @hw: hw specific details
+ * @device_id: the device ID
+ * @subdev_id: the subsystem device ID
+ *
+ * This function is used by probe and ethtool to determine
+ * which devices have WoL support
+ *
+ **/
+int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+                       u16 subdevice_id)
+{
+       struct ixgbe_hw *hw = &adapter->hw;
+       u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
+       int is_wol_supported = 0;
+
+       switch (device_id) {
+       case IXGBE_DEV_ID_82599_SFP:
+               /* Only these subdevices could supports WOL */
+               switch (subdevice_id) {
+               case IXGBE_SUBDEV_ID_82599_560FLR:
+                       /* only support first port */
+                       if (hw->bus.func != 0)
+                               break;
+               case IXGBE_SUBDEV_ID_82599_SFP:
+                       is_wol_supported = 1;
+                       break;
+               }
+               break;
+       case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+               /* All except this subdevice support WOL */
+               if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+                       is_wol_supported = 1;
+               break;
+       case IXGBE_DEV_ID_82599_KX4:
+               is_wol_supported = 1;
+               break;
+       case IXGBE_DEV_ID_X540T:
+               /* check eeprom to see if enabled wol */
+               if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
+                   ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
+                    (hw->bus.func == 0))) {
+                       is_wol_supported = 1;
+               }
+               break;
+       }
+
+       return is_wol_supported;
+}
+
 /**
  * ixgbe_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -6811,7 +6862,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
        u16 device_caps;
 #endif
        u32 eec;
-       u16 wol_cap;
 
        /* Catch broken hardware that put the wrong VF device ID in
         * the PCIe SR-IOV capability.
@@ -7075,40 +7125,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                netdev->features &= ~NETIF_F_RXHASH;
        }
 
-       /* WOL not supported for all but the following */
+       /* WOL not supported for all devices */
        adapter->wol = 0;
-       switch (pdev->device) {
-       case IXGBE_DEV_ID_82599_SFP:
-               /* Only these subdevice supports WOL */
-               switch (pdev->subsystem_device) {
-               case IXGBE_SUBDEV_ID_82599_560FLR:
-                       /* only support first port */
-                       if (hw->bus.func != 0)
-                               break;
-               case IXGBE_SUBDEV_ID_82599_SFP:
-                       adapter->wol = IXGBE_WUFC_MAG;
-                       break;
-               }
-               break;
-       case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
-               /* All except this subdevice support WOL */
-               if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
-                       adapter->wol = IXGBE_WUFC_MAG;
-               break;
-       case IXGBE_DEV_ID_82599_KX4:
+       hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
+       if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device))
                adapter->wol = IXGBE_WUFC_MAG;
-               break;
-       case IXGBE_DEV_ID_X540T:
-               /* Check eeprom to see if it is enabled */
-               hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
-               wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
 
-               if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
-                   ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
-                    (hw->bus.func == 0)))
-                       adapter->wol = IXGBE_WUFC_MAG;
-               break;
-       }
        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
        /* save off EEPROM version number */