/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
module_param(lpfc_prot_guard, byte, 0);
MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
+/*
+ * Delay initial NPort discovery when Clean Address bit is cleared in
+ * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed.
+ * This parameter can have value 0 or 1.
+ * When this parameter is set to 0, no delay is added to the initial
+ * discovery.
+ * When this parameter is set to non-zero value, initial Nport discovery is
+ * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC
+ * accept and FCID/Fabric name/Fabric portname is changed.
+ * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion
+ * when Clean Address bit is cleared in FLOGI/FDISC
+ * accept and FCID/Fabric name/Fabric portname is changed.
+ * Default value is 0.
+ */
+int lpfc_delay_discovery;
+module_param(lpfc_delay_discovery, int, 0);
+MODULE_PARM_DESC(lpfc_delay_discovery,
+ "Delay NPort discovery when Clean Address bit is cleared. "
+ "Allowed values: 0,1.");
/*
* lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2009 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2011 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
return rc;
}
+/**
+ * lpfc_check_clean_addr_bit - Check whether assigned FCID is clean.
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @sp: pointer to service parameter data structure.
+ *
+ * This routine is called from FLOGI/FDISC completion handler functions.
+ * lpfc_check_clean_addr_bit return 1 when FCID/Fabric portname/ Fabric
+ * node nodename is changed in the completion service parameter else return
+ * 0. This function also set flag in the vport data structure to delay
+ * NP_Port discovery after the FLOGI/FDISC completion if Clean address bit
+ * in FLOGI/FDISC response is cleared and FCID/Fabric portname/ Fabric
+ * node nodename is changed in the completion service parameter.
+ *
+ * Return code
+ * 0 - FCID and Fabric Nodename and Fabric portname is not changed.
+ * 1 - FCID or Fabric Nodename or Fabric portname is changed.
+ *
+ **/
+static uint8_t
+lpfc_check_clean_addr_bit(struct lpfc_vport *vport,
+ struct serv_parm *sp)
+{
+ uint8_t fabric_param_changed = 0;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ if ((vport->fc_prevDID != vport->fc_myDID) ||
+ memcmp(&vport->fabric_portname, &sp->portName,
+ sizeof(struct lpfc_name)) ||
+ memcmp(&vport->fabric_nodename, &sp->nodeName,
+ sizeof(struct lpfc_name)))
+ fabric_param_changed = 1;
+
+ /*
+ * Word 1 Bit 31 in common service parameter is overloaded.
+ * Word 1 Bit 31 in FLOGI request is multiple NPort request
+ * Word 1 Bit 31 in FLOGI response is clean address bit
+ *
+ * If fabric parameter is changed and clean address bit is
+ * cleared delay nport discovery if
+ * - vport->fc_prevDID != 0 (not initial discovery) OR
+ * - lpfc_delay_discovery module parameter is set.
+ */
+ if (fabric_param_changed && !sp->cmn.clean_address_bit &&
+ (vport->fc_prevDID || lpfc_delay_discovery)) {
+ spin_lock_irq(shost->host_lock);
+ vport->fc_flag |= FC_DISC_DELAYED;
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ return fabric_param_changed;
+}
+
+
/**
* lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *np;
struct lpfc_nodelist *next_np;
+ uint8_t fabric_param_changed;
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_FABRIC;
ndlp->nlp_class_sup |= FC_COS_CLASS4;
ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) |
sp->cmn.bbRcvSizeLsb;
+
+ fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
+ memcpy(&vport->fabric_portname, &sp->portName,
+ sizeof(struct lpfc_name));
+ memcpy(&vport->fabric_nodename, &sp->nodeName,
+ sizeof(struct lpfc_name));
memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
}
}
- if ((vport->fc_prevDID != vport->fc_myDID) &&
+ if (fabric_param_changed &&
!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
/* If our NportID changed, we need to ensure all
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
IOCB_t *irsp;
struct lpfc_sli *psli;
+ struct lpfcMboxq *mbox;
psli = &phba->sli;
/* we pass cmdiocb to state machine which needs rspiocb as well */
NLP_EVT_CMPL_LOGO);
out:
lpfc_els_free_iocb(phba, cmdiocb);
+ /* If we are in pt2pt mode, we could rcv new S_ID on PLOGI */
+ if ((vport->fc_flag & FC_PT2PT) &&
+ !(vport->fc_flag & FC_PT2PT_PLOGI)) {
+ phba->pport->fc_myDID = 0;
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (mbox) {
+ lpfc_config_link(phba, mbox);
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->vport = vport;
+ if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) ==
+ MBX_NOT_FINISHED) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ }
+ }
+ }
return;
}
if (vport->load_flag & FC_UNLOADING)
goto dropit;
+ /* If NPort discovery is delayed drop incoming ELS */
+ if ((vport->fc_flag & FC_DISC_DELAYED) &&
+ (cmd != ELS_CMD_PLOGI))
+ goto dropit;
+
ndlp = lpfc_findnode_did(vport, did);
if (!ndlp) {
/* Cannot find existing Fabric ndlp, so allocate a new one */
ndlp = lpfc_plogi_confirm_nport(phba, payload, ndlp);
lpfc_send_els_event(vport, ndlp, payload);
+
+ /* If Nport discovery is delayed, reject PLOGIs */
+ if (vport->fc_flag & FC_DISC_DELAYED) {
+ rjt_err = LSRJT_UNABLE_TPC;
+ break;
+ }
if (vport->port_state < LPFC_DISC_AUTH) {
if (!(phba->pport->fc_flag & FC_PT2PT) ||
(phba->pport->fc_flag & FC_PT2PT_PLOGI)) {
lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp, *ndlp_fdmi;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ /*
+ * If lpfc_delay_discovery parameter is set and the clean address
+ * bit is cleared and fc fabric parameters chenged, delay FC NPort
+ * discovery.
+ */
+ spin_lock_irq(shost->host_lock);
+ if (vport->fc_flag & FC_DISC_DELAYED) {
+ spin_unlock_irq(shost->host_lock);
+ mod_timer(&vport->delayed_disc_tmo,
+ jiffies + HZ * phba->fc_ratov);
+ return;
+ }
+ spin_unlock_irq(shost->host_lock);
ndlp = lpfc_findnode_did(vport, NameServer_DID);
if (!ndlp) {
struct lpfc_nodelist *next_np;
IOCB_t *irsp = &rspiocb->iocb;
struct lpfc_iocbq *piocb;
+ struct lpfc_dmabuf *pcmd = cmdiocb->context2, *prsp;
+ struct serv_parm *sp;
+ uint8_t fabric_param_changed;
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0123 FDISC completes. x%x/x%x prevDID: x%x\n",
vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID;
lpfc_vport_set_state(vport, FC_VPORT_ACTIVE);
- if ((vport->fc_prevDID != vport->fc_myDID) &&
+ prsp = list_get_first(&pcmd->list, struct lpfc_dmabuf, list);
+ sp = prsp->virt + sizeof(uint32_t);
+ fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
+ memcpy(&vport->fabric_portname, &sp->portName,
+ sizeof(struct lpfc_name));
+ memcpy(&vport->fabric_nodename, &sp->nodeName,
+ sizeof(struct lpfc_name));
+ if (fabric_param_changed &&
!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
/* If our NportID changed, we need to ensure all
* remaining NPORTs get unreg_login'ed so we can
projects / karo-tx-linux.git / commitdiff