regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- armadillo5x0_smc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- armadillo5x0_smc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
- platform_add_devices(devices, ARRAY_SIZE(devices));
- imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
/* Register UART */
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
- /* SMSC9118 IRQ pin */
- gpio_direction_input(MX31_PIN_GPIO1_0);
-
- /* Register SDHC */
- imx31_add_mxc_mmc(0, &sdhc_pdata);
-
/* Register FB */
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* set NAND page size to 2k if not configured via boot mode pins */
imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
mx3_ccm_base + MXC_CCM_RCSR);
+}
+
+static void __init armadillo5x0_late(void)
+{
+ armadillo5x0_smc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ armadillo5x0_smc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ imx_add_gpio_keys(&armadillo5x0_button_data);
+
+ /* SMSC9118 IRQ pin */
+ gpio_direction_input(MX31_PIN_GPIO1_0);
+
+ /* Register SDHC */
+ imx31_add_mxc_mmc(0, &sdhc_pdata);
/* RTC */
/* Get RTC IRQ and register the chip */
- if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
- if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
- armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+ if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
+ if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
+ armadillo5x0_i2c_rtc.irq =
+ gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
else
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
+
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
-
usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbotg_pdata.otg)
.init_irq = mx31_init_irq,
.init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
+ .init_late = armadillo5x0_late,
.restart = mxc_restart,
MACHINE_END
static void __init visstrim_m10_board_init(void)
{
int ret;
- int mo_version;
imx27_soc_init();
visstrim_m10_revision();
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
- ret = gpio_request_array(visstrim_m10_gpios,
- ARRAY_SIZE(visstrim_m10_gpios));
- if (ret)
- pr_err("Failed to request gpios (%d)\n", ret);
-
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
- imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_late_init(void)
+{
+ int mo_version, ret;
+
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
+ imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
sizeof(snd_mx27vis_pdata));
platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
&iclink_tvp5150, sizeof(iclink_tvp5150));
+
gpio_led_register_device(0, &visstrim_m10_led_data);
/* Use mother board version to decide what video devices we shall use */
visstrim_deinterlace_init();
visstrim_analog_camera_init();
}
+
visstrim_coda_init();
}
.init_irq = mx27_init_irq,
.init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
+ .init_late = visstrim_m10_late_init,
.restart = mxc_restart,
MACHINE_END
mxc_iomux_setup_multiple_pins(kzm_pins,
ARRAY_SIZE(kzm_pins), "kzm");
- kzm_init_ext_uart();
- kzm_init_smsc9118();
kzm_init_imx_uart();
pr_info("Clock input source is 26MHz\n");
}
+static void __init kzm_late_init(void)
+{
+ kzm_init_ext_uart();
+ kzm_init_smsc9118();
+}
+
/*
* This structure defines static mappings for the kzm-arm11-01 board.
*/
.init_irq = mx31_init_irq,
.init_time = kzm_timer_init,
.init_machine = kzm_board_init,
+ .init_late = kzm_late_init,
.restart = mxc_restart,
MACHINE_END
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
- imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
imx21_add_imx_fb(&mx21ads_fb_data);
+}
+
+static void __init mx21ads_late_init(void)
+{
+ imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
.init_time = mx21ads_timer_init,
- .init_machine = mx21ads_board_init,
+ .init_machine = mx21ads_board_init,
+ .init_late = mx21ads_late_init,
.restart = mxc_restart,
MACHINE_END
static void __init mx27pdk_init(void)
{
- int ret;
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
- mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
- imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt();
+
+ imx27_add_spi_imx1(&spi2_pdata);
+ imx27_add_spi_imx0(&spi1_pdata);
+
+ imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+ imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+ int ret;
+
+ mx27_3ds_sdhc1_enable_level_translator();
+ imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
otg_phy_init();
if (otg_mode_host) {
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
- imx27_add_spi_imx1(&spi2_pdata);
- imx27_add_spi_imx0(&spi1_pdata);
mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
- ARRAY_SIZE(mx27_3ds_spi_devs));
+ ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
- imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
- imx27_add_imx_fb(&mx27_3ds_fb_data);
ret = gpio_request_array(mx27_3ds_camera_gpios,
ARRAY_SIZE(mx27_3ds_camera_gpios));
}
imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
- imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
.init_irq = mx27_init_irq,
.init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
+ .init_late = mx27pdk_late_init,
.restart = mxc_restart,
MACHINE_END
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
- mx27ads_regulator_init();
imx27_add_imx_fb(&mx27ads_fb_data);
+
+ imx27_add_fec(NULL);
+ imx27_add_mxc_w1();
+}
+
+static void __init mx27ads_late_init(void)
+{
+ mx27ads_regulator_init();
+
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_mxc_mmc(1, &sdhc2_pdata);
- imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- imx27_add_mxc_w1();
}
static void __init mx27ads_timer_init(void)
.init_irq = mx27_init_irq,
.init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
+ .init_late = mx27ads_late_init,
.restart = mxc_restart,
MACHINE_END
static void __init mx31_3ds_init(void)
{
- int ret;
-
imx31_soc_init();
/* Configure SPI1 IOMUX */
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+
+ imx31_add_imx_keypad(&mx31_3ds_keymap_data);
+
+ imx31_add_imx2_wdt();
+ imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+
+ imx31_add_spi_imx0(&spi0_pdata);
+ imx31_add_ipu_core();
+ imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+ imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+ imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+}
+
+static void __init mx31_3ds_late(void)
+{
+ int ret;
+
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
- ARRAY_SIZE(mx31_3ds_spi_devs));
+ ARRAY_SIZE(mx31_3ds_spi_devs));
platform_add_devices(devices, ARRAY_SIZE(devices));
- imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
mx31_3ds_usbotg_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
- "devices on the debug board are unusable.\n");
- imx31_add_imx2_wdt();
- imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
- imx31_add_mxc_mmc(0, &sdhc1_pdata);
+ "devices on the debug board are unusable.\n");
- imx31_add_spi_imx0(&spi0_pdata);
- imx31_add_ipu_core();
- imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+ imx31_add_mxc_mmc(0, &sdhc1_pdata);
/* CSI */
/* Camera power: default - off */
}
mx31_3ds_init_camera();
-
- imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
- imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
static void __init mx31_3ds_timer_init(void)
.init_irq = mx31_init_irq,
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
+ .init_late = mx31_3ds_late,
.reserve = mx31_3ds_reserve,
.restart = mxc_restart,
MACHINE_END
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
-static void __init mx31ads_init_irq(void)
-{
- mx31_init_irq();
- mx31ads_init_expio();
-}
-
static void __init mx31ads_init(void)
{
imx31_soc_init();
- mxc_init_extuart();
mxc_init_imx_uart();
- mxc_init_i2c();
mxc_init_audio();
+}
+
+static void __init mx31ads_late(void)
+{
+ mx31ads_init_expio();
+ mxc_init_extuart();
+ mxc_init_i2c();
mxc_init_ext_ethernet();
}
.atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
- .init_irq = mx31ads_init_irq,
+ .init_irq = mx31_init_irq,
.init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
+ .init_late = mx31ads_late,
.restart = mxc_restart,
MACHINE_END
* appropriate baseboard support code.
*/
+static unsigned int mx31lilly_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
/* SMSC ethernet support */
static struct resource smsc91x_resources[] = {
{
imx31_soc_init();
- switch (mx31lilly_baseboard) {
- case MX31LILLY_NOBOARD:
- break;
- case MX31LILLY_DB:
- mx31lilly_db_init();
- break;
- default:
- printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
- mx31lilly_baseboard);
- }
+ mxc_iomux_setup_multiple_pins(mx31lilly_pins,
+ ARRAY_SIZE(mx31lilly_pins), "mx31lily");
+
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_imx_uart1(&uart_pdata);
+ imx31_add_imx_uart2(&uart_pdata);
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
imx31_add_spi_imx0(&spi0_pdata);
imx31_add_spi_imx1(&spi1_pdata);
- mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_dev, 1);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lilly_late_init(void)
+{
+ if (mx31lilly_baseboard == MX31LILLY_DB)
+ mx31lilly_db_init();
+
+ mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ spi_register_board_info(&mc13783_dev, 1);
smsc91x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31lilly_timer_init,
- .init_machine = mx31lilly_board_init,
+ .init_machine = mx31lilly_board_init,
+ .init_late = mx31lilly_late_init,
.restart = mxc_restart,
MACHINE_END
*/
static unsigned int mx31lite_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* SPI 0 */
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
/* SPI 1 */
MX31_PIN_CSPI2_SS2__SS2,
};
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* SPI */
+static int spi0_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
+ MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+ .chipselect = spi0_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi0_internal_chipselect),
+};
+
static const struct mxc_nand_platform_data
mx31lite_nand_board_info __initconst = {
.width = 1,
* The MC13783 is the only hard-wired SPI device on the module.
*/
-static int spi_internal_chipselect[] = {
+static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
};
static const struct spi_imx_master spi1_pdata __initconst = {
- .chipselect = spi_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+ .chipselect = spi1_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
.num_resources = 1,
};
-
-
/*
* This structure defines the MX31 memory map.
*/
static void __init mx31lite_init(void)
{
- int ret;
-
imx31_soc_init();
- switch (mx31lite_baseboard) {
- case MX31LITE_NOBOARD:
- break;
- case MX31LITE_DB:
- mx31lite_db_init();
- break;
- default:
- printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
- mx31lite_baseboard);
- }
-
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_spi_imx0(&spi0_pdata);
+
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(&spi1_pdata);
+
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lite_late(void)
+{
+ int ret;
+
+ if (mx31lite_baseboard == MX31LITE_DB)
+ mx31lite_db_init();
+
mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
.init_irq = mx31_init_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
+ .init_late = mx31lite_late,
.restart = mxc_restart,
MACHINE_END
"moboard");
platform_add_devices(devices, ARRAY_SIZE(devices));
- gpio_led_register_device(-1, &mx31moboard_led_pdata);
imx31_add_imx2_wdt();
- moboard_uart0_init();
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
imx31_add_spi_imx1(&moboard_spi1_pdata);
imx31_add_spi_imx2(&moboard_spi2_pdata);
+ mx31moboard_init_cam();
+
+ imx31_add_imx_ssi(0, &moboard_ssi_pdata);
+
+ pm_power_off = mx31moboard_poweroff;
+}
+
+static void __init mx31moboard_late(void)
+{
+ gpio_led_register_device(-1, &mx31moboard_led_pdata);
+
+ moboard_uart0_init();
+
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
moboard_spi_board_info[0].irq =
imx31_add_mxc_mmc(0, &sdhc1_pdata);
- mx31moboard_init_cam();
-
usb_xcvr_reset();
-
moboard_usbh2_init();
- imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
- pm_power_off = mx31moboard_poweroff;
-
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
.init_irq = mx31_init_irq,
.init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
+ .init_late = mx31moboard_late,
.restart = mxc_restart,
MACHINE_END
*/
static void __init mx35_3ds_init(void)
{
- struct platform_device *imx35_fb_pdev;
-
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
- if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
- pr_warn("Init of the debugboard failed, all "
- "devices on the debugboard are unusable.\n");
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
i2c_register_board_info(
imx35_add_ipu_core();
platform_device_register(&mx35_3ds_ov2640);
imx35_3ds_init_camera();
+}
+
+static void __init mx35_3ds_late_init(void)
+{
+ struct platform_device *imx35_fb_pdev;
+
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
+ pr_warn("Init of the debugboard failed, all "
+ "devices on the debugboard are unusable.\n");
imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
.init_irq = mx35_init_irq,
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
+ .init_late = mx35_3ds_late_init,
.reserve = mx35_3ds_reserve,
.restart = mxc_restart,
MACHINE_END
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
- imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
imx27_add_imx_uart0(&uart_pdata);
- imx27_add_mxc_mmc(1, &sdhc_pdata);
-
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_data);
+ imx27_add_imx_fb(&pca100_fb_data);
+
+ imx27_add_fec(NULL);
+ imx27_add_imx2_wdt();
+ imx27_add_mxc_w1();
+}
+
+static void __init pca100_late_init(void)
+{
+ imx27_add_imx_ssi(0, &pca100_ssi_pdata);
+
+ imx27_add_mxc_mmc(1, &sdhc_pdata);
+
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- imx27_add_imx_fb(&pca100_fb_data);
-
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
- imx27_add_mxc_w1();
}
static void __init pca100_timer_init(void)
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_machine = pca100_init,
+ .init_machine = pca100_init,
+ .init_late = pca100_late_init,
.init_time = pca100_timer_init,
.restart = mxc_restart,
MACHINE_END
*/
static void __init pcm037_init(void)
{
- int ret;
-
imx31_soc_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
imx31_add_mxc_w1();
- /* LAN9217 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
- if (ret)
- pr_warn("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- platform_device_register(&pcm037_eth);
- }
-
-
/* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
imx31_add_imx_i2c2(&pcm037_i2c2_data);
imx31_add_mxc_nand(&pcm037_nand_board_info);
- imx31_add_mxc_mmc(0, &sdhc_pdata);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
- /* CSI */
- /* Camera power: default - off */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
- if (!ret)
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
- else
- iclink_mt9t031.power = NULL;
-
- pcm037_init_camera();
-
- pcm970_sja1000_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- pcm970_sja1000_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
- platform_device_register(&pcm970_sja1000);
-
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
}
static void __init pcm037_timer_init(void)
static void __init pcm037_init_late(void)
{
+ int ret;
+
+ /* LAN9217 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (!ret) {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ smsc911x_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ } else {
+ pr_warn("could not get LAN irq gpio\n");
+ }
+
+ imx31_add_mxc_mmc(0, &sdhc_pdata);
+
+ /* CSI */
+ /* Camera power: default - off */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+ if (!ret)
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+ else
+ iclink_mt9t031.power = NULL;
+
+ pcm037_init_camera();
+
+ pcm970_sja1000_resources[1].start =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+ pcm970_sja1000_resources[1].end =
+ gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+ platform_device_register(&pcm970_sja1000);
+
pcm037_eet_init_devices();
}
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
- imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
imx35_add_imx_uart1(&uart_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1();
+}
+
+static void __init pcm043_late_init(void)
+{
+ imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
+
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.init_time = pcm043_timer_init,
- .init_machine = pcm043_init,
+ .init_machine = pcm043_init,
+ .init_late = pcm043_late_init,
.restart = mxc_restart,
MACHINE_END
mxc_init_imx_uart();
qong_init_nor_mtd();
- qong_init_fpga();
imx31_add_imx2_wdt();
}
.init_irq = mx31_init_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
+ .init_late = qong_init_fpga,
.restart = mxc_restart,
MACHINE_END
imx35_add_fec(NULL);
imx35_add_imx2_wdt();
+
+ imx35_add_imx_uart0(NULL);
+ imx35_add_imx_uart2(NULL);
+
+ imx35_add_ipu_core();
+ imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+ imx35_add_fsl_usb2_udc(&otg_device_pdata);
+ imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+ imx35_add_mxc_nand(&vpr200_nand_board_info);
+ imx35_add_sdhci_esdhc_imx(0, NULL);
+}
+
+static void __init vpr200_late_init(void)
+{
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
else
gpio_direction_input(GPIO_PMIC_INT);
- imx35_add_imx_uart0(NULL);
- imx35_add_imx_uart2(NULL);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- imx35_add_mxc_nand(&vpr200_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-
vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
.init_irq = mx35_init_irq,
.init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
+ .init_late = vpr200_late_init,
.restart = mxc_restart,
MACHINE_END
*/
static unsigned int lilly_db_board_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_CONTRAST__CONTRAST,
};
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
/* MMC support */
static int mxc_mmc1_get_ro(struct device *dev)
mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
ARRAY_SIZE(lilly_db_board_pins),
"development board pins");
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_imx_uart1(&uart_pdata);
- imx31_add_imx_uart2(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
mx31lilly_init_fb();
}
*/
static unsigned int litekit_db_board_pins[] __initdata = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* SPI 0 */
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
/* SDHC1 */
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_CMD__SD1_CMD,
};
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
/* MMC */
static int gpio_det, gpio_wp;
.exit = mxc_mmc1_exit,
};
-/* SPI */
-
-static int spi_internal_chipselect[] = {
- MXC_SPI_CS(0),
- MXC_SPI_CS(1),
- MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
- .chipselect = spi_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
/* GPIO LEDs */
static const struct gpio_led litekit_leds[] __initconst = {
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
- imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
- imx31_add_spi_imx0(&spi0_pdata);
gpio_led_register_device(-1, &litekit_led_platform_data);
imx31_add_imx2_wdt();
imx31_add_mxc_rtc();
projects / karo-tx-linux.git / commitdiff