--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <plat/gpio-nomadik.h>
+
+#include <plat/pincfg.h>
+#include <plat/ste_dma40.h>
+
+#include <mach/devices.h>
+#include <ste-dma40-db8500.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msp.h>
+
+#include "board-mop500.h"
+#include "devices-db8500.h"
+#include "pins-db8500.h"
+
+/* MSP1/3 Tx/Rx usage protection */
+static DEFINE_SPINLOCK(msp_rxtx_lock);
+
+/* Reference Count */
+static int msp_rxtx_ref;
+
+static pin_cfg_t mop500_msp1_pins_init[] = {
+ GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_DISABLE,
+ GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
+ GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
+ GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_DISABLE,
+};
+
+static pin_cfg_t mop500_msp1_pins_exit[] = {
+ GPIO33_MSP1_TXD | PIN_OUTPUT_LOW | PIN_SLPM_WAKEUP_ENABLE,
+ GPIO34_MSP1_TFS | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
+ GPIO35_MSP1_TCK | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
+ GPIO36_MSP1_RXD | PIN_INPUT_NOPULL | PIN_SLPM_WAKEUP_ENABLE,
+};
+
+int msp13_i2s_init(void)
+{
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&msp_rxtx_lock, flags);
+ if (msp_rxtx_ref == 0)
+ retval = nmk_config_pins(
+ ARRAY_AND_SIZE(mop500_msp1_pins_init));
+ if (!retval)
+ msp_rxtx_ref++;
+ spin_unlock_irqrestore(&msp_rxtx_lock, flags);
+
+ return retval;
+}
+
+int msp13_i2s_exit(void)
+{
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&msp_rxtx_lock, flags);
+ WARN_ON(!msp_rxtx_ref);
+ msp_rxtx_ref--;
+ if (msp_rxtx_ref == 0)
+ retval = nmk_config_pins_sleep(
+ ARRAY_AND_SIZE(mop500_msp1_pins_exit));
+ spin_unlock_irqrestore(&msp_rxtx_lock, flags);
+
+ return retval;
+}
+
+static struct stedma40_chan_cfg msp0_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp0_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct msp_i2s_platform_data msp0_platform_data = {
+ .id = MSP_I2S_0,
+ .msp_i2s_dma_rx = &msp0_dma_rx,
+ .msp_i2s_dma_tx = &msp0_dma_tx,
+};
+
+static struct stedma40_chan_cfg msp1_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp1_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct msp_i2s_platform_data msp1_platform_data = {
+ .id = MSP_I2S_1,
+ .msp_i2s_dma_rx = NULL,
+ .msp_i2s_dma_tx = &msp1_dma_tx,
+ .msp_i2s_init = msp13_i2s_init,
+ .msp_i2s_exit = msp13_i2s_exit,
+};
+
+static struct stedma40_chan_cfg msp2_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp2_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ .use_fixed_channel = true,
+ .phy_channel = 1,
+
+ /* data_width is set during configuration */
+};
+
+static int db8500_add_msp_i2s(struct device *parent, int id,
+ resource_size_t base, int irq,
+ struct msp_i2s_platform_data *pdata)
+{
+ struct platform_device *pdev;
+ struct resource res[] = {
+ DEFINE_RES_MEM(base, SZ_4K),
+ DEFINE_RES_IRQ(irq),
+ };
+
+ pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
+ id, irq);
+ pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+ if (!pdev) {
+ pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
+ id);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/* Platform device for ASoC U8500 machine */
+static struct platform_device snd_soc_u8500 = {
+ .name = "snd-soc-u8500",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+/* Platform device for Ux500-PCM */
+static struct platform_device ux500_pcm = {
+ .name = "ux500-pcm",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+static struct msp_i2s_platform_data msp2_platform_data = {
+ .id = MSP_I2S_2,
+ .msp_i2s_dma_rx = &msp2_dma_rx,
+ .msp_i2s_dma_tx = &msp2_dma_tx,
+};
+
+static struct msp_i2s_platform_data msp3_platform_data = {
+ .id = MSP_I2S_3,
+ .msp_i2s_dma_rx = &msp1_dma_rx,
+ .msp_i2s_dma_tx = NULL,
+ .msp_i2s_init = msp13_i2s_init,
+ .msp_i2s_exit = msp13_i2s_exit,
+};
+
+int mop500_msp_init(struct device *parent)
+{
+ int ret;
+
+ pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
+ platform_device_register(&snd_soc_u8500);
+
+ pr_info("Initialize MSP I2S-devices.\n");
+ ret = db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
+ &msp0_platform_data);
+ ret |= db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+ &msp1_platform_data);
+ ret |= db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
+ &msp2_platform_data);
+ ret |= db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
+ &msp3_platform_data);
+
+ pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
+ platform_device_register(&ux500_pcm);
+
+ return ret;
+}
*/
/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, msp3, 11, 10, &clk_msp1clk);
static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
CLK(slimbus0, "slimbus0", NULL),
CLK(i2c2, "nmk-i2c.2", NULL),
CLK(sdi0, "sdi0", NULL),
- CLK(msp0, "msp0", NULL),
+ CLK(msp0, "ux500-msp-i2s.0", NULL),
CLK(i2c1, "nmk-i2c.1", NULL),
CLK(uart1, "uart1", NULL),
CLK(uart0, "uart0", NULL),
/* Peripheral Cluster #1 */
CLK(i2c4, "nmk-i2c.4", NULL),
CLK(spi3, "spi3", NULL),
- CLK(msp1, "msp1", NULL),
+ CLK(msp1, "ux500-msp-i2s.1", NULL),
+ CLK(msp3, "ux500-msp-i2s.3", NULL),
/* Peripheral Cluster #2 */
CLK(gpio1, "gpio.6", NULL),
CLK(spi0, "spi0", NULL),
CLK(sdi3, "sdi3", NULL),
CLK(sdi1, "sdi1", NULL),
- CLK(msp2, "msp2", NULL),
+ CLK(msp2, "ux500-msp-i2s.2", NULL),
CLK(sdi4, "sdi4", NULL),
CLK(pwl, "pwl", NULL),
CLK(spi1, "spi1", NULL),
return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
}
-
#define db8500_add_i2c0(parent, pdata) \
dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
#define db8500_add_i2c1(parent, pdata) \
#define db8500_add_i2c4(parent, pdata) \
dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-#define db8500_add_msp0_i2s(parent, pdata) \
- dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(parent, pdata) \
- dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(parent, pdata) \
- dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(parent, pdata) \
- dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
#define db8500_add_msp0_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
IRQ_DB8500_MSP0, pdata)
projects / karo-tx-linux.git / commitdiff