From: Aaro Koskinen Date: Wed, 27 May 2009 14:54:45 +0000 (+0300) Subject: i2c: OMAP2/3: Fix scll/sclh calculations X-Git-Tag: v2.6.31-rc1~348^2~3 X-Git-Url: https://git.kernelconcepts.de/?a=commitdiff_plain;h=baf46b4e378d7950dff7ba30cfd50ff585987cb4;p=karo-tx-linux.git i2c: OMAP2/3: Fix scll/sclh calculations Fix scll/sclh calculations for HS and fast modes. Currently the driver uses equal (roughly) low/high times which will result in too short low time. OMAP3430 TRM gives the following equations: F/S: tLow = (scll + 7) * internal_clk tHigh = (sclh + 5) * internal_clk HS: tLow = (scll + 7) * fclk tHigh = (sclh + 5) * fclk Furthermore, the I2C specification sets the following minimum values for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400) and 400 pF (maximum speed 1700): speed tLow tHigh 3400 160 ns 60 ns 1700 320 ns 120 ns and for F/S: speed tLow tHigh 400 1300 ns 600 ns 100 4700 ns 4000 ns By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these minimum values. Signed-off-by: Aaro Koskinen Acked-by: Tony Lindgren Signed-off-by: Ben Dooks --- diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index ece0125a1ee5..a879e4bf5122 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -343,17 +343,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) /* If configured for High Speed */ if (dev->speed > 400) { + unsigned long scl; + /* For first phase of HS mode */ - fsscll = internal_clk / (400 * 2) - 6; - fssclh = internal_clk / (400 * 2) - 6; + scl = internal_clk / 400; + fsscll = scl - (scl / 3) - 7; + fssclh = (scl / 3) - 5; /* For second phase of HS mode */ - hsscll = fclk_rate / (dev->speed * 2) - 6; - hssclh = fclk_rate / (dev->speed * 2) - 6; + scl = fclk_rate / dev->speed; + hsscll = scl - (scl / 3) - 7; + hssclh = (scl / 3) - 5; + } else if (dev->speed > 100) { + unsigned long scl; + + /* Fast mode */ + scl = internal_clk / dev->speed; + fsscll = scl - (scl / 3) - 7; + fssclh = (scl / 3) - 5; } else { - /* To handle F/S modes */ - fsscll = internal_clk / (dev->speed * 2) - 6; - fssclh = internal_clk / (dev->speed * 2) - 6; + /* Standard mode */ + fsscll = internal_clk / (dev->speed * 2) - 7; + fssclh = internal_clk / (dev->speed * 2) - 5; } scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;