From: Heiko Schocher Date: Tue, 15 Nov 2011 15:00:04 +0000 (-0500) Subject: arm, davinci_emac: fix driver bug if more then 3 PHYs are detected X-Git-Tag: v2011.12-rc1~220^2^2~1 X-Git-Url: https://git.kernelconcepts.de/?a=commitdiff_plain;h=dc02badab480563b0bf9d3908046ea9d6b22ae63;p=karo-tx-uboot.git arm, davinci_emac: fix driver bug if more then 3 PHYs are detected since commits: davinci: emac: add support for more than 1 PHYs 062fe7d332c28ede25626f448681e43d76bb312e davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM fb1d6332b5430b90a8fa8ebab709f33a60e9f816 I get following warning on the enbw_cmc board: Err: serial Net: 5 ETH PHY detected miiphy_register: non unique device name 'KSZ8873 @ 0x01' DaVinci-EMAC Hit any key to stop autoboot: 0 Also I see some debug printfs: => run load + emac_close + emac_ch_teardown - emac_ch_teardown + emac_ch_teardown - emac_ch_teardown - emac_close + emac_open - emac_open Using DaVinci-EMAC device reason is 062fe7d332c28ede25626f448681e43d76bb312e new define MAX_PHY. This is set to 3! I get on this board 5 active phys, so this leads in wrong memory writes ... so I changed: - define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT to set the MAX_PHY value, add a description in README for the new CONFIG_SYS option. - print an error message if more then MAX_PHYs are detected. - fill the active_phy_addr array in a for loop with 0xff - changed printf() in debug_emac() Signed-off-by: Heiko Schocher Cc: Sandeep Paulraj Cc: Albert ARIBAUD Cc: Wolfgang Denk Cc: Manjunath Hadli Cc: Prabhakar Lad Cc: Mike Frysinger Cc: Tom Rini Signed-off-by: Sandeep Paulraj --- diff --git a/README b/README index 73ca042f68..07f1d11e5f 100644 --- a/README +++ b/README @@ -1027,6 +1027,12 @@ The following options need to be configured: Define this to use i/o functions instead of macros (some hardware wont work with macros) + CONFIG_DRIVER_TI_EMAC + Support for davinci emac + + CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT + Define this if you have more then 3 PHYs. + CONFIG_FTGMAC100 Support for Faraday's FTGMAC100 Gigabit SoC Ethernet diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index fa31159a0e..36c33af662 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -85,15 +85,17 @@ static int emac_rx_queue_active = 0; /* Receive packet buffers */ static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; -#define MAX_PHY 3 +#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT +#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3 +#endif /* PHY address for a discovered PHY (0xff - not found) */ -static u_int8_t active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff }; +static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; /* number of PHY found active */ static u_int8_t num_phy; -phy_t phy[MAX_PHY]; +phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT]; static int davinci_eth_set_mac_addr(struct eth_device *dev) { @@ -160,9 +162,8 @@ static int davinci_eth_phy_detect(void) int j; unsigned int count = 0; - active_phy_addr[0] = 0xff; - active_phy_addr[1] = 0xff; - active_phy_addr[2] = 0xff; + for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++) + active_phy_addr[i] = 0xff; udelay(1000); phy_act_state = readl(&adap_mdio->ALIVE); @@ -175,7 +176,14 @@ static int davinci_eth_phy_detect(void) for (i = 0, j = 0; i < 32; i++) if (phy_act_state & (1 << i)) { count++; - active_phy_addr[j++] = i; + if (count < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) { + active_phy_addr[j++] = i; + } else { + printf("%s: to many PHYs detected.\n", + __func__); + count = 0; + break; + } } num_phy = count; @@ -752,7 +760,7 @@ int davinci_emac_initialize(void) if (!ret) return(0); else - printf(" %d ETH PHY detected\n", ret); + debug_emac(" %d ETH PHY detected\n", ret); /* Get PHY ID and initialize phy_ops for a detected PHY */ for (i = 0; i < num_phy; i++) {