]> git.kernelconcepts.de Git - karo-tx-linux.git/history - drivers
ENGR00161643-2 MX6Q-lite : enlarge the mtd partition of NOR
[karo-tx-linux.git] / drivers /
2013-09-30 Sandor YuENGR00161315 IPUv3 fix VDIC split line between up/down...
2013-09-30 Tony LinENGR00161631 [ASRC]fix build error
2013-09-30 make shiENGR00161598 [MX6] OTG Driver:fix OTG function issue
2013-09-30 Jason ChenENGR00161607 mxc v4l2 output: return real phys offset...
2013-09-30 Jason ChenENGR00161526 mxc v4l2 output: 720p ic bypass output...
2013-09-30 Frank LiENGR00161447-1 v4l2: fix section missmach warning
2013-09-30 Fugang DuanENGR00159982 - FEC: low power mode when FEC is no use.
2013-09-30 Even XuENGR00161382-4 MX6Q MIPI CSI2: enable MIPI CSI2
2013-09-30 Even XuENGR00161382-3 MX6Q MIPI CSI2: Add MIPI CSI2 driver
2013-09-30 make shiENGR00161383 [MX6Q] USB OTG: enable OTG driver
2013-09-30 Jason ChenENGR00160878-2 mxc v4l2 output: new mxc v4l2 output...
2013-09-30 Jason ChenENGR00160877 ipuv3: pm method change
2013-09-30 Jason ChenENGR00160876 videobuf: add timestamp for user point...
2013-09-30 Jason ChenENGR00160875-3 ipuv3 dev: low performance if enable...
2013-09-30 Peter ChenENGR00161314-2 mx6q usb-host: add hsic support
2013-09-30 Sammy HeENGR00161215-2 vpu: Add ioctls for querying and setting...
2013-09-30 Dong AishengENGR00161256-1 flexcan: convert driver to use platform ids
2013-09-30 Fugang DuanENGR00161312 - FEC: fix build warning
2013-09-30 YuxiENGR00161300 MXC V4L2 capture: fix build warning
2013-09-30 Terry LvENGR00161234-1: Enable ocotp clock for mx6q
2013-09-30 Richard ZhaoENGR00161301 Upgrade to 4.6.2
2013-09-30 Nancy ChenENGR00161292 [mx6q] Fix incompatible pointer warnings
2013-09-30 Fugang DuanENGR00161207 - FEC: Add IEEE 1588 driver for imx6
2013-09-30 Wayne ZouENGR00159981-2 MIPI DSI: Add MIPI DSI driver and suppor...
2013-09-30 Robin GongENGR00157253-2 MX6Q spi: update spi driver for MX6Q
2013-09-30 Mahesh MahadevanENGR00160701 Fix the Micrel PHY driver
2013-09-30 Nancy ChenENGR00160797-2 Add Anatop regulator driver
2013-09-30 Alan TullENGR00160860-2 hdmi audio driver
2013-09-30 Tony LinENGR00160940-2 [MX6Q]sdhci: add delay line configuration
2013-09-30 Huang ShijieENGR00160936 GPMI : disable the DDR code
2013-09-30 Sammy HeENGR00160802-2 vpu: Check interrupt reason before disab...
2013-09-30 Alan TullENGR00160855 balance spinlock and irq enable in mxc...
2013-09-30 Huang ShijieENGR00160834 UTP : replace kzalloc() with vmalloc()
2013-09-30 Robin GongENGR00159530-4 mc34708:add new mc34708's rtc driver
2013-09-30 Robin GongENGR00159530-3 mc34708:add new regulator driver
2013-09-30 Robin GongENGR00159530-1 mc34708: add new pmic core driver based...
2013-09-30 Gary ZhangENGR00160512 SDMA: close clock when not used
2013-09-30 Danny NoldENGR00160692 - MXC HDMI: Unbalanced clk disable
2013-09-30 Mahesh MahadevanENGR00160709-2 Move board specific code out of FEC...
2013-09-30 YuxiENGR00160626 fix system hang when ipu clk get rate
2013-09-30 YuxiENGR00160112-4 camera: Add sensor clock setting for MX6
2013-09-30 Danny NoldENGR00160061 - MXC HDMI: Optimize HDMI clock management
2013-09-30 Tony LinENGR00160241 [mx6q]sdhci: kernel panic caused by clock...
2013-09-30 Huang ShijieENGR00139279 MX6Q: support the MFGTOOL
2013-09-30 Anson HuangENGR00159796 [MX6]Cooling of cpufreq should consider...
2013-09-30 Yuxi SunENGR00159738 v4l2: correct wrong parameter when V4l2...
2013-09-30 Anson HuangENGR00159512 [Mx6]Fix thermal driver build warning
2013-09-30 Anson HuangENGR00159007 [MX6]Add cpufreq cooling device
2013-09-30 Jason ChenENGR00158456-2 ipuv3 dev: return error for split mode...
2013-09-30 Yuxi SunENGR00158152 v4l2 capture: changes based on ipu changes
2013-09-30 Danny NoldENGR00156420 - EPDC/PxP: Add support for color map
2013-09-30 Danny NoldENGR00157457 - MXC HDMI: Add support for non-CEA spec...
2013-09-30 Sammy HeENGR00157155-2 vpu: Get resource by platform_get_resour...
2013-09-30 Jason ChenENGR00156996 ipuv3: fix pixel clock look up table
2013-09-30 Richard ZhaoENGR00156850 gpu-viv: add gpu-viv driver source
2013-09-30 Jason ChenENGR00156319-2 mxc edid: use vmode as aspect rate flag
2013-09-30 Jason ChenENGR00156673-3 ipuv3: move mach related definition...
2013-09-30 Jason ChenENGR00156374 ipuv3: check channel busy while wait disab...
2013-09-30 Danny NoldENGR00156300 - EPDC fb: Move ISR code to work Q & repla...
2013-09-30 Jason ChenENGR00156234 ipuv3: fix cpmem issue
2013-09-30 Jason ChenENGR00155146 ipuv3: use mutex instead of spin lock
2013-09-30 Jason ChenENGR00155140 ipuv3: add support of power suspend/resume
2013-09-30 Jason ChenENGR00155135-3 ipuv3 dev: add processing driver support
2013-09-30 Anish TrivediENGR00155880 USB device: Fix RNDIS Full Speed hang...
2013-09-30 Anson HuangENGR00155995 [MX6]Adjust default thermal point
2013-09-30 Danny NoldENGR00154436-2 - MXC HDMI: Support complete feature set
2013-09-30 Alan TullENGR00155845-1 mfd for hdmi
2013-09-30 Peter ChenENGR00155761 usb-host: fix the buiild warning with...
2013-09-30 Peter ChenENGR00155764 usb-host: fix the system hang when access...
2013-09-30 Tony LinENGR00155612-4 [mx6q]change the delay after clock frequ...
2013-09-30 Tony LinENGR00155612-3 [mx6q]add delay after cmd6 for eMMC...
2013-09-30 Tony LinENGR00155612-2 [mx6q]dynamically sd pad setting change
2013-09-30 Ming Leiusb: ehci: make HC see up-to-date qh/qtd descriptor...
2013-09-30 Anson HuangENGR00155627 [MX6]Add thermal cooling device
2013-09-30 Anson HuangENGR00155627-1 [MX6]Add thermal cooling devie
2013-09-30 Tony LinENGR00155611 [mx6q]correct eMMC DDR mode clock setting
2013-09-30 Peter ChenENGR00155396 usb-host: fix below build warning
2013-09-30 Jason ChenENGR00154080 ipuv3: fix clear buffer function
2013-09-30 Jason ChenENGR00155145 ipuv3 disp pos: restore pos setting after...
2013-09-30 Jason ChenENGR00153474 ipuv3 split mode: vf and enc task display...
2013-09-30 Jason ChenENGR00155141 ipuv3 split mode: adjust split calculate...
2013-09-30 Tony LinENGR00155400 [ath6kl]build warning
2013-09-30 Tony LinENGR00153895 [MX6Q]SD: SD3 clock is not off, when no...
2013-09-30 Anson HuangENGR00155391-2 [MX6]Clean up build warning
2013-09-30 Tony LinENGR00155288 [mx6q]sd dat1 glitch causes system panic
2013-09-30 Tony LinENGR00139260-2 [ath6k wifi]add some delay after resuming
2013-09-30 Tony LinENGR00139260-1 [ath6k wifi]remove drivers under drivers...
2013-09-30 Terry LvENGR00155179-2: Change imx_viim to mxs_viim.
2013-09-30 Jason ChenENGR00154981 ipuv3: fix clock issue
2013-09-30 Terry LvENGR00154889-2: Add virtual iim driver
2013-09-30 Tony LinENGR00139261 [MX6Q]support 8 bit MMC and eMMC DDR mode
2013-09-30 Peter ChenENGR00154704 usb-gadget: wmb is needed after dtd pointe...
2013-09-30 Peter ChenENGR00154703 usb-gadget: fix spin_lock recursion proble...
2013-09-30 Peter ChenENGR00154382 usb-udc: Set fsl arc usb driver as default...
2013-09-30 Jason ChenENGR00154437 mxc edid: add cea extend revision 1 and...
2013-09-30 Zeng ZhaomingENGR00154525 SDMA: SDMA not works when event number...
2013-09-30 Huang ShijieENGR00139247-6 DMA : add DMA support for imx6q
2013-09-30 Huang ShijieENGR00139247-3 MTD : add GPMI driver for IMX6Q
2013-09-30 Danny NoldENGR00154431 - MXCFB_SET_WAVEFORMS ioctl broken
2013-09-30 Richard ZhaoENGR00154429 rtc-snvs: request_irq too early
next