Andrew Morton [Tue, 8 Nov 2011 00:20:18 +0000 (11:20 +1100)]
lib-crc-add-slice-by-8-algorithm-to-crc32c-fix
don't include asm/msr.h
Cc: Bob Pearson <rpearson@systemfabricworks.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Roland Dreier <roland@kernel.org> Cc: frank zago <fzago@systemfabricworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
frank zago [Tue, 8 Nov 2011 00:20:18 +0000 (11:20 +1100)]
lib/crc: add slice by 8 algorithm to crc32.c
Add support for slice by 8 to existing crc32 algorithm. Also modify
gen_crc32table.c to only produce table entries that are actually used.
The parameters CRC_LE_BITS and CRC_BE_BITS determine the number of bits in
the input array that are processed during each step. Generally the more
bits the faster the algorithm is but the more table data required.
Using an x86_64 Opteron machine running at 2100MHz the following table was
collected with a pre-warmed cache by computing the crc 1000 times on a
buffer of 4096 bytes.
BITS is the value of CRC_LE_BITS or CRC_BE_BITS. The old
default was 8 which actually selected the 32 bit algorithm. In
this version the value 8 is used to select the standard
8 bit algorithm and two new values: 32 and 64 are introduced
to select the slice by 4 and slice by 8 algorithms respectively.
Where Size is the size of crc32.o's text segment which includes
code and table data when both LE and BE versions are set to BITS.
The current version of crc32.c by default uses the slice by 4 algorithm
which requires about 2.8 cycles per byte. The slice by 8 algorithm is
roughly 2X faster and enables packet processing at over 1GB/sec on a
typical 2-3GHz system.
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com> Cc: Roland Dreier <roland@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hans Verkuil [Tue, 8 Nov 2011 00:20:17 +0000 (11:20 +1100)]
poll: add poll_requested_events() function
In some cases the poll() implementation in a driver has to do different
things depending on the events the caller wants to poll for. An example
is when a driver needs to start a DMA engine if the caller polls for
POLLIN, but doesn't want to do that if POLLIN is not requested but instead
only POLLOUT or POLLPRI is requested. This is something that can happen
in the video4linux subsystem.
Unfortunately, the current epoll/poll/select implementation doesn't
provide that information reliably. The poll_table_struct does have it: it
has a key field with the event mask. But once a poll() call matches one
or more bits of that mask any following poll() calls are passed a NULL
poll_table_struct pointer.
The solution is to set the qproc field to NULL in poll_table_struct once
poll() matches the events, not the poll_table_struct pointer itself. That
way drivers can obtain the mask through a new poll_requested_events
inline.
The poll_table_struct can still be NULL since some kernel code calls it
internally (netfs_state_poll() in ./drivers/staging/pohmelfs/netfs.h). In
that case poll_requested_events() returns ~0 (i.e. all events).
Since eventpoll always leaves the key field at ~0 instead of using the
requested events mask, that source was changed as well to properly fill in
the key field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Tue, 8 Nov 2011 00:20:17 +0000 (11:20 +1100)]
intel_idle: fix API misuse
smp_call_function() only lets all other CPUs execute a specific function,
while we expect all CPUs do in intel_idle. Without the fix, we could have
one cpu which has auto_demotion enabled or has no boradcast timer setup.
Usually we don't see impact because auto demotion just harms power and the
intel_idle init is called in CPU 0, where boradcast timer delivers
interrupt, but this still could be a problem.
Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Magnus Lynch [Tue, 8 Nov 2011 00:20:16 +0000 (11:20 +1100)]
hpet: factor timer allocate from open
The current implementation of the /dev/hpet driver couples opening the
device with allocating one of the (scarce) timers (aka comparators). This
is a limitation in that the main counter may be valuable to applications
seeking a high-resolution timer who have no use for the interrupt
generating functionality of the comparators.
This patch alters the open semantics so that when the device is opened, no
timer is allocated. Operations that depend on a timer being in context
implicitly attempt allocating a timer, to maintain backward compatibility.
There is also an IOCTL (HPET_ALLOC_TIMER _IO) added so that the
allocation may be done explicitly. (I prefer the explicit open then
allocate pattern but don't know how practical it would be to require all
existing code to be changed.)
/dev/hpet is accessed via mmap(). This is the only interface of /dev/hpet
that is actually used in practice.
[akpm@linux-foundation.org: coding-style tweaks]
[arnd@arndb.de: fix build] Signed-off-by: Magnus Lynch <maglyx@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Tue, 8 Nov 2011 00:20:16 +0000 (11:20 +1100)]
selinuxfs: remove custom hex_to_bin()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Eric Paris <eparis@parisplace.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nicolas Pitre [Tue, 8 Nov 2011 00:20:15 +0000 (11:20 +1100)]
mm: add vm_area_add_early()
The existing vm_area_register_early() allows for early vmalloc space
allocation. However upcoming cleanups in the ARM architecture require
that some fixed locations in the vmalloc area be reserved also very early.
The name "vm_area_register_early" would have been a good name for the
reservation part without the allocation. Since it is already in use with
Both vm_area_register_early() and vm_area_add_early() can be used together
meaning that the former is now implemented using the later where it is
ensured that no conflicting areas are added, but no attempt is made to
make the allocation scheme in vm_area_register_early() more sophisticated.
After all, you must know what you're doing when using those functions.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rik van Riel [Tue, 8 Nov 2011 00:20:15 +0000 (11:20 +1100)]
mm-add-extra-free-kbytes-tunable-update
All the fixes suggested by Andrew Morton. Not much of a changelog
since the patch should probably be folded into
mm-add-extra-free-kbytes-tunable.patch
Thank you for pointing these out, Andrew.
Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rik van Riel [Tue, 8 Nov 2011 00:20:14 +0000 (11:20 +1100)]
mm: add extra free kbytes tunable
Add a userspace visible knob to tell the VM to keep an extra amount of
memory free, by increasing the gap between each zone's min and low
watermarks.
This is useful for realtime applications that call system calls and have a
bound on the number of allocations that happen in any short time period.
In this application, extra_free_kbytes would be left at an amount equal to
or larger than than the maximum number of allocations that happen in any
burst.
It may also be useful to reduce the memory use of virtual machines
(temporarily?), in a way that does not cause memory fragmentation like
ballooning does.
Testing results from Satoru Moriya:
: I ran some sample workloads and measure memory allocation latency
: (latency of __alloc_page_nodemask()).
: The test is like following:
:
: - CPU: 1 socket, 4 core
: - Memory: 4GB
:
: - Background load:
: $ dd if=3D/dev/zero of=3D/tmp/tmp1
: $ dd if=3D/dev/zero of=3D/tmp/tmp2
: $ dd if=3D/dev/zero of=3D/tmp/tmp3
:
: - Main load:
: $ mapped-file-stream 1 $((1024 * 1024 * 640)) --(*)
:
: (*) This is made by Johannes Weiner
: https://lkml.org/lkml/2010/8/30/226
:
: It allocates/access 640MByte memory at a burst.
:
: The result is follwoing:
:
: | | extra |
: | default | kbytes |
: --------------------------------------------------------------
: min_free_kbytes | 8113 | 8113 |
: extra_free_kbytes | 0 | 640*1024 | (KB)
: --------------------------------------------------------------
: worst latency | 517.762 | 20.775 | (usec)
: --------------------------------------------------------------
: vmstat result | | |
: nr_vmscan_write | 0 | 0 |
: pgsteal_dma | 0 | 0 |
: pgsteal_dma32 | 143667 | 144882 |
: pgsteal_normal | 31486 | 27001 |
: pgsteal_movable | 0 | 0 |
: pgscan_kswapd_dma | 0 | 0 |
: pgscan_kswapd_dma32 | 138617 | 156351 |
: pgscan_kswapd_normal | 30593 | 27955 |
: pgscan_kswapd_movable | 0 | 0 |
: pgscan_direct_dma | 0 | 0 |
: pgscan_direct_dma32 | 5050 | 0 |
: pgscan_direct_normal | 896 | 0 |
: pgscan_direct_movable | 0 | 0 |
: kswapd_steal | 169207 | 171883 |
: kswapd_inodesteal | 0 | 0 |
: kswapd_low_wmark_hit_quickly | 43 | 45 |
: kswapd_high_wmark_hit_quickly | 1 | 0 |
: allocstall | 32 | 0 |
:
:
: As you can see, in the default case there were 32 direct reclaim
: (allocstal= l) and its worst latency was 517.762 usecs. This value may be
: larger if a process would sleep or issue I/O in the direct reclaim path.
: OTOH, ii the other case where I add extra free bytes, there were no direct
: reclaim and its worst latency was 20.775 usecs.
:
: In this test case, we can avoid direct reclaim and keep a latency low.
Signed-off-by: Rik van Riel<riel@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Tested-by: Satoru Moriya <satoru.moriya@hds.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit v2.6.36-5896-gd065bd8 "mm: retry page fault when blocking on
disk transfer" we usually wait in page-faults without mmap_sem held, so
all swap-token logic was broken, because it based on using
rwsem_is_locked(&mm->mmap_sem) as sign of in progress page-faults.
Add an atomic counter of in progress page-faults for mm to the mm_struct
with swap-token.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds helper free_hot_cold_page_list() to free list of 0-order
pages. It frees pages directly from list without temporary page-vector.
It also calls trace_mm_pagevec_free() to simulate pagevec_free()
behaviour.
vmscan: activate executable pages after first usage
Logic added in commit 8cab4754d24a0 ("vmscan: make mapped executable pages
the first class citizen") was noticeably weakened in commit 645747462435d84 ("vmscan: detect mapped file pages used only once").
Currently these pages can become "first class citizens" only after second
usage. After this patch page_check_references() will activate they after
first usage, and executable code gets yet better chance to stay in memory.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 645747462435 ("vmscan: detect mapped file pages used only once")
greatly decreases lifetime of single-used mapped file pages.
Unfortunately it also decreases life time of all shared mapped file pages.
Because after commit bf3f3bc5e7347 ("mm: don't mark_page_accessed
in fault path") page-fault handler does not mark page active or even
referenced.
Thus page_check_references() activates file page only if it was used twice
while it stays in inactive list, meanwhile it activates anon pages after
first access. Inactive list can be small enough, this way reclaimer can
accidentally throw away any widely used page if it wasn't used twice in
short period.
After this patch page_check_references() also activate file mapped page at
first inactive list scan if this page is already used multiple times via
several ptes.
I found this while trying to fix degragation in rhel6 (~2.6.32) from rhel5
(~2.6.18). There a complete mess with >100 web/mail/spam/ftp containers,
they share all their files but there a lot of anonymous pages: ~500mb
shared file mapped memory and 15-20Gb non-shared anonymous memory. In
this situation major-pagefaults are very costly, because all containers
share the same page. In my load kernel created a disproportionate
pressure on the file memory, compared with the anonymous, they equaled
only if I raise swappiness up to 150 =)
These patches actually wasn't helped a lot in my problem, but I saw
noticable (10-20 times) reduce in count and average time of
major-pagefault in file-mapped areas.
Actually both patches are fixes for commit v2.6.33-5448-g6457474, because
it was aimed at one scenario (singly used pages), but it breaks the logic
in other scenarios (shared and/or executable pages)
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Pekka Enberg <penberg@kernel.org> Acked-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic-long operations instead of looping around cmpxchg().
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock. For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0. Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this. So the next time around this shrinker can cause really
big pressure. Let's skip such shrinkers instead.
Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Tue, 8 Nov 2011 00:20:09 +0000 (11:20 +1100)]
paride: fix potential information leak in pg_read()
Smatch has a new check for Rosenberg type information leaks where structs
are copied to the user with uninitialized stack data in them. i In this
case, the pg_write_hdr struct has a hole in it.
Dan Carpenter [Tue, 8 Nov 2011 00:20:08 +0000 (11:20 +1100)]
bio: change some signed vars to unsigned
This is just a cleanup patch to silence a static checker warning.
The problem is that we cap "nr_iovecs" so it can't be larger than
"UIO_MAXIOV" but we don't check for negative values. It turns out this is
prevented at other layers, but logically it doesn't make sense to have
negative nr_iovecs so making it unsigned is nicer.
Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
include/linux/bio.h: use a static inline function for bio_integrity_clone()
When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings:
drivers/md/dm.c: In function 'split_bvec':
drivers/md/dm.c:1061:3: warning: statement with no effect
drivers/md/dm.c: In function 'clone_bio':
drivers/md/dm.c:1088:3: warning: statement with no effect
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cciss: auto engage SCSI mid layer at driver load time
A long time ago, probably in 2002, one of the distros, or maybe more than
one, loaded block drivers prior to loading the SCSI mid layer. This meant
that the cciss driver, being a block driver, could not engage the SCSI mid
layer at init time without panicking, and relied on being poked by a
userland program after the system was up (and the SCSI mid layer was
therefore present) to engage the SCSI mid layer.
This is no longer the case, and cciss can safely rely on the SCSI mid
layer being present at init time and engage the SCSI mid layer straight
away. This means that users will see their tape drives and medium
changers at driver load time without need for a script in /etc/rc.d that
does this:
for x in /proc/driver/cciss/cciss*
do
echo "engage scsi" > $x
done
However, if no tape drives or medium changers are detected, the SCSI mid
layer will not be engaged. If a tape drive or medium change is later
hot-added to the system it will then be necessary to use the above script
or similar for the device(s) to be acceesible.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dmitry Monakhov [Tue, 8 Nov 2011 00:20:06 +0000 (11:20 +1100)]
loop: cleanup set_status interface
1) Anyone who has read access to loopdev has permission to call set_status
and may change important parameters such as lo_offset, lo_sizelimit and
so on, which contradicts to read access pattern and definitely equals
to write access pattern.
2) Add lo_offset over i_size check to prevent blkdev_size overflow.
##Testcase_bagin
#dd if=/dev/zero of=./file bs=1k count=1
#losetup /dev/loop0 ./file
/* userspace_application */
struct loop_info64 loinf;
fd = open("/dev/loop0", O_RDONLY);
ioctl(fd, LOOP_GET_STATUS64, &loinf);
/* Set offset to any value which is bigger than i_size, and sizelimit
* to nonzero value*/
loinf.lo_offset = 4096*1024;
loinf.lo_sizelimit = 1024;
ioctl(fd, LOOP_SET_STATUS64, &loinf);
/* After this loop device will have size similar to 0x7fffffffffxxxx */
#blockdev --getsz /dev/loop0
##OUTPUT: 36028797018955968
##Testcase_end
Dmitry Monakhov [Tue, 8 Nov 2011 00:20:06 +0000 (11:20 +1100)]
loop: prevent information leak after failed read
If read was not fully successful we have to fail whole bio to prevent
information leak of old pages
##Testcase_begin
dd if=/dev/zero of=./file bs=1M count=1
losetup /dev/loop0 ./file -o 4096
truncate -s 0 ./file
# OOps loop offset is now beyond i_size, so read will silently fail.
# So bio's pages would not be cleared, may which result in information leak.
hexdump -C /dev/loop0
##testcase_end
Stephen Boyd [Tue, 8 Nov 2011 00:20:05 +0000 (11:20 +1100)]
drivers/scsi/sg.c: convert to kstrtoul_from_user()
Instead of open coding this function use kstrtoul_from_user() directly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jesper Juhl [Tue, 8 Nov 2011 00:20:04 +0000 (11:20 +1100)]
drivers/scsi/aacraid/commctrl.c: fix mem leak in aac_send_raw_srb()
We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :
We allocate memory:
...
struct user_sgmap* usg;
usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
+ sizeof(struct sgmap), GFP_KERNEL);
and then neglect to free it:
...
for (i = 0; i < usg->count; i++) {
u64 addr;
void* p;
if (usg->sg[i].count >
((dev->adapter_info.options &
AAC_OPT_NEW_COMM) ?
(dev->scsi_host_ptr->max_sectors << 9) :
65536)) {
rcode = -EINVAL;
goto cleanup;
... this 'goto' makes 'usg' go out of scope and leak the memory we
allocated.
Other exits properly kfree(usg), it's just here it is neglected.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Randy Dunlap [Tue, 8 Nov 2011 00:20:04 +0000 (11:20 +1100)]
drivers/scsi/megaraid.c: fix sparse warnings
Fix sparse warnings of right shift bigger than source value size:
drivers/scsi/megaraid.c:311:65: warning: right shift by bigger than source value
drivers/scsi/megaraid.c:313:65: warning: right shift by bigger than source value
drivers/scsi/megaraid.c:317:67: warning: right shift by bigger than source value
drivers/scsi/megaraid.c:319:67: warning: right shift by bigger than source value
Patch suggestion from email by Al Viro:
"Since both are claimed to be strings, I really suspect that this >> 8 is
misspelled >> 4 and they have a character followed by pair of two-digit
packed decimals in there..."
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For headers that get exported to userland and make use of u32 style
type names, it is advised to include linux/types.h.
This fixes a headers_check warning.
Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Tue, 8 Nov 2011 00:20:04 +0000 (11:20 +1100)]
drivers/firmware/dmi_scan.c: make dmi_name_in_vendors more focused
The current implementation of dmi_name_in_vendors() is an invitation to
lazy coding and false positives [1]. Searching for a string in 8 know
what you're looking for, so you should know where to look. strstr isn't
fast, especially when it fails, so we should avoid calling it when it just
can't succeed.
Looking at the current users of the function, it seems clear to me that
they are looking for a system or board vendor name, so let's limit
dmi_name_in_vendors to these two DMI fields. This much better matches the
function name, BTW.
[1] We currently have code looking for short names in DMI data, such
as "IBM", "ASUS" or "Acer". I let you guess what will happen the day
other vendors ship products named, for example, "SCHREIBMEISTER",
"PEGASUS" or "Acerola".
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Tue, 8 Nov 2011 00:20:03 +0000 (11:20 +1100)]
ocfs2: avoid unaligned access to dqc_bitmap
The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
but not 64-bit aligned. The dqc_bitmap is accessed by ocfs2_set_bit(),
ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit(). These
are wrapper macros for ext2_*_bit() which need to take an unsigned long
aligned address (though some architectures are able to handle unaligned
address correctly)
So some 64bit architectures may not be able to access the dqc_bitmap
correctly.
This avoids such unaligned access by using another wrapper functions for
ext2_*_bit(). The code is taken from fs/ext4/mballoc.c which also need to
handle unaligned bitmap access.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Tue, 8 Nov 2011 00:20:03 +0000 (11:20 +1100)]
ext4: use proper little-endian bitops
ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4. Only two ext4_{set,clear}_bit() calls check the return value. The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().
This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.
This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.
This also removes unused ext4_find_first_zero_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Christine Chan [Tue, 8 Nov 2011 00:20:02 +0000 (11:20 +1100)]
kernel/timer.c: use debugobjects to catch deletion of uninitialized timers
del_timer_sync() calls debug_object_assert_init() to assert that a timer
has been initialized before calling lock_timer_base(). lock_timer_base()
would spin forever on a NULL(uninit-ed) base. The check is added to
del_timer() to prevent silent failure, even though it would not get stuck
in an infinite loop.
Signed-off-by: Christine Chan <cschan@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In file included from drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c:22:
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h:24:1: warning: "pr_fmt" redefined
In file included from include/linux/kernel.h:20,
from include/linux/cache.h:4,
from include/linux/time.h:7,
from include/linux/stat.h:60,
from include/linux/module.h:10,
from drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c:21:
include/linux/printk.h:152:1: warning: this is the location of the previous definition
Cc: Tomoya <tomoya-linux@dsn.okisemi.com> Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Amerigo Wang <amwang@redhat.com>
ERROR: Macros with complex values should be enclosed in parenthesis
#87: FILE: include/linux/ipc_namespace.h:126:
+#define DFLT_MSGSIZEMAX 1024*1024
ERROR: Macros with complex values should be enclosed in parenthesis
#88: FILE: include/linux/ipc_namespace.h:127:
+#define HARD_MSGSIZEMAX 16*1024*1024
total: 2 errors, 0 warnings, 75 lines checked
./patches/ipc-mqueue-update-maximums-for-the-mqueue-subsystem.patch has style problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ipc/mqueue.c: In function 'mqueue_get_inode':
ipc/mqueue.c:154:4: error: implicit declaration of function 'vmalloc'
ipc/mqueue.c:154:19: warning: assignment makes pointer from integer without=
a cast
ipc/mqueue.c: In function 'mqueue_evict_inode':
ipc/mqueue.c:278:3: error: implicit declaration of function 'vfree'
Caused by commit 8a53f9442429 ("ipc/mqueue: update maximums for the
mqueue subsystem"). See Rule 1 in Documentation/SubmitChecklist.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doug Ledford [Tue, 8 Nov 2011 00:20:01 +0000 (11:20 +1100)]
ipc/mqueue: update maximums for the mqueue subsystem
Commit b231cca4381ee ("message queues: increase range limits") changed the
maximum size of a message in a message queue from INT_MAX to 8192*128.
Unfortunately, we had customers that relied on a size much larger than
8192*128 on their production systems. After reviewing POSIX, we found
that it is silent on the maximum message size. We did find a couple other
areas in which it was not silent. Fix up the mqueue maximums so that the
customer's system can continue to work, and document both the POSIX and
real world requirements in ipc_namespace.h so that we don't have this
issue crop back up.
Also, commit 9cf18e1dd74c ("ipc: HARD_MSGMAX should be higher not lower on
64bit") fiddled with HARD_MSGMAX without realizing that the number was
intentionally in place to limit the msg queue depth to one that was small
enough to kmalloc an array of pointers (hence why we divided 128k by
sizeof(long)). If we wish to meet POSIX requirements, we have no choice
but to change our allocation to a vmalloc instead (at least for the large
queue size case). With that, it's possible to increase our allowed
maximum to the POSIX requirements (or more if we choose).
Signed-off-by: Doug Ledford <dledford@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Joe Korty <joe.korty@ccur.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doug Ledford [Tue, 8 Nov 2011 00:20:00 +0000 (11:20 +1100)]
ipc/mqueue: enforce hard limits
In two places we don't enforce the hard limits for CAP_SYS_RESOURCE apps.
In preparation for making more reasonable hard limits, start enforcing
them even on CAP_SYS_RESOURCE.
Signed-off-by: Doug Ledford <dledford@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Joe Korty <joe.korty@ccur.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doug Ledford [Tue, 8 Nov 2011 00:20:00 +0000 (11:20 +1100)]
ipc/mqueue: switch back to using non-max values on create
Commit b231cca4381ee15e ("message queues: increase range limits") changed
how we create a queue that does not include an attr struct passed to open
so that it creates the queue with whatever the maximum values are.
However, if the admin has set the maximums to allow flexibility in
creating a queue (aka, both a large size and large queue are allowed, but
combined they create a queue too large for the RLIMIT_MSGQUEUE of the
user), then attempts to create a queue without an attr struct will fail.
Switch back to using acceptable defaults regardless of what the maximums
are.
Signed-off-by: Doug Ledford <dledford@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Joe Korty <joe.korty@ccur.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Doug Ledford [Tue, 8 Nov 2011 00:20:00 +0000 (11:20 +1100)]
ipc/mqueue: cleanup definition names and locations
We had a customer come up with a problem while trying to upgrade from our
2.6.18 kernel to our 2.6.32 kernel. In diagnosing their problem, it was
determined that when commit b231cca4 ("message queues: increase range
limits") changed the msg size max from INT_MAX to 8192*128, that's what
broke their setup.
While fixing this problem, testing showed that if you increase the max
values of a msg queue, then attempt to create one without an attr struct
passed in to the open call, it could fail because it sets the queue size
to the max of both the msg size and queue size. If these are large
enough, they over run the default RLIMIT_MSGQUEUE. This change was also
introduced in the b231cca4 ("message queues: increase range limits")
commit.
We then found that the msg queue limits were not all being enforced on
CAP_SYS_RESOURCE apps.
Finally, we found that commit 9cf18e1d ("ipc: HARD_MSGMAX should be higher
not lower on 64bit") fiddled with HARD_MSGMAX without realizing that the
reason it was set to what it was, was to avoid trying to kmalloc a chunk
larger than 128K.
So this series of patches cleans up the various defines, takes us back to
having a larger HARD_MSGSIZEMAX, goes back to using a separate define for
the case where a user doesn't pass in an attr struct in case the maxes
have been raised too large for RLIMIT_MSGQUEUE, enforces the maximums on
CAP_SYS_RESOURCE apps, uses vmalloc instead of kmalloc when the msg
pointer array is too large, and documents all of this so it shouldn't
happen again.
This patch:
The various defines for minimums and maximums of the sysctl controllable
mqueue values are scattered amongst different files and named
inconsistently. Move them all into ipc_namespace.h and make them have
consistent names. Additionally, make the number of queues per namespace
also have a minimum and maximum and use the same sysctl function as the
other two settable variables.
Signed-off-by: Doug Ledford <dledford@redhat.com> Cc: Amerigo Wang <amwang@redhat.com> Cc: Serge E. Hallyn <serue@us.ibm.com> Cc: Joe Korty <joe.korty@ccur.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andi Kleen [Tue, 8 Nov 2011 00:19:59 +0000 (11:19 +1100)]
brlocks/lglocks: clean up code
lglocks and brlocks are currently generated with some complicated macros
in lglock.h. But there's no reason I can see to not just use common
utility functions that get pointers to the lglock.
Since there are at least two users it makes sense to share this code in a
library.
This will also make it later possible to dynamically allocate lglocks.
In general the users now look more like normal function calls with
pointers, not magic macros.
The patch is rather large because I move over all users in one go to keep
it bisectable. This impacts the VFS somewhat in terms of lines changed.
But no actual behaviour change.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Garrett [Tue, 8 Nov 2011 00:19:58 +0000 (11:19 +1100)]
hrtimers: Special-case zero length sleeps
sleep(0) is a common construct used by applications that want to trigger
the scheduler. sched_yield() might make more sense, but only appeared in
POSIX.1-2001 and so plenty of example code still uses the sleep(0) form.
This wouldn't normally be a problem, but it means that event-driven
applications that are merely trying to avoid starving other processes may
actually end up sleeping due to having large timer_slack values. Special-
casing this seems reasonable.
Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Tue, 8 Nov 2011 00:19:58 +0000 (11:19 +1100)]
drm: avoid switching to text console if there is no panic timeout
Add a check for panic_timeout in the drm_fb_helper_panic() notifier: if
we're going to reboot immediately, the user will not be able to see the
messages anyway, and messing with the video mode may display artifacts,
and certainly get into several layers of complexity (including mutexes and
memory allocations) which we shall be much safer to avoid.
[msb@chromium.org: edited commit message and modified to short-circuit panic_timeout < 0 instead of testing panic_timeout >= 0] Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohui Xie [Tue, 8 Nov 2011 00:19:57 +0000 (11:19 +1100)]
drivers/edac/mpc85xx_edac.c: fix memory controller compatible for edac
compatible in dts has been changed, so the driver needs to be updated
accordingly.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jesper Juhl [Tue, 8 Nov 2011 00:19:56 +0000 (11:19 +1100)]
audit: always follow va_copy() with va_end()
A call to va_copy() should always be followed by a call to va_end() in the
same function. In kernel/autit.c::audit_log_vformat() this is not always
done. This patch makes sure va_end() is always called.
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mathias Krause [Tue, 8 Nov 2011 00:19:56 +0000 (11:19 +1100)]
arm, exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The problem is that in copy_page_range() we turn lazy mode on, and then in
swap_entry_free() we call swap_count_continued() which ends up in:
map = kmap_atomic(page, KM_USER0) + offset;
and then later we touch *map.
Since we are running in batched mode (lazy) we don't actually set up the
PTE mappings and the kmap_atomic is not done synchronously and ends up
trying to dereference a page that has not been set.
Looking at kmap_atomic_prot_pfn(), it uses 'arch_flush_lazy_mmu_mode' and
doing the same in kmap_atomic_prot() and __kunmap_atomic() makes the problem
go away.
Interestingly, commit b8bcfe997e4615 ("x86/paravirt: remove lazy mode in
interrupts") removed part of this to fix an interrupt issue - but it went
to far and did not consider this scenario.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/tsc.c: In function 'calibrate_delay_is_known':
arch/x86/kernel/tsc.c:1012: error: 'struct cpuinfo_x86' has no member named 'phys_proc_id'
arch/x86/kernel/tsc.c:1012: error: 'struct cpuinfo_x86' has no member named 'phys_proc_id'
arch/x86/kernel/tsc.c:1006: warning: unused variable 'cpu'
Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jack Steiner <steiner@sgi.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jack Steiner [Tue, 8 Nov 2011 00:19:55 +0000 (11:19 +1100)]
x86: reduce clock calibration time during slave cpu startup
Reduce the startup time for slave cpus.
Adds hooks for an arch-specific function for clock calibration. These
hooks are used on x86. If a newly started cpu has the same phys_proc_id
as a core already active, uses the TSC for the delay loop and has a
CONSTANT_TSC, use the already-calculated value of loops_per_jiffy.
This patch reduces the time required to start slave cpus on a 4096 cpu
system from: 465 sec OLD 62 sec NEW
This reduces boot time on a 4096p system by almost 7 minutes. Nice...
Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shaohua Li [Tue, 8 Nov 2011 00:19:54 +0000 (11:19 +1100)]
x86: tlb flush avoid superflous leave_mm()
If just one page VA tlb is required to be flushed and current task is in
lazy TLB state, doing leave_mm() is superfluous because it flushes the
whole TLB. This can reduce some TLB miss.
Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
The last parameter to sort() is a pointer to the function used to swap
items. This parameter should be NULL, not 0, when not used. This quiets
the following sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
William Douglas [Tue, 8 Nov 2011 00:19:53 +0000 (11:19 +1100)]
x86,mrst: add mapping for bma023
There is now an upstream bma023 driver so instead of submitting ours we
use that one. The defaults are just fine so it's a simple mapping entry.
(Thanks go to Erik Andersson for incorporating the changes we needed into his
version)
Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Tue, 8 Nov 2011 00:19:53 +0000 (11:19 +1100)]
drivers/power/intel_mid_battery.c: fix build
Seems that nobody's even trying any more.
Cc: Nithish Mahalingam <nithish.mahalingam@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Major Lee <major_lee@wistron.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Feng Tang [Tue, 8 Nov 2011 00:19:52 +0000 (11:19 +1100)]
vrtc: change its year offset from 1960 to 1972
Real world year equals the value in vrtc YEAR register plus an offset. We
used 1960 for original developepment as the offset to make leap year
consistent, but for a device's first use, its YEAR register is 0 and the
system year will be parsed as 1960 which is not a valid UNIX time and will
cause many applications to fail mysteriously. Devices use 1972 instead to
fix this issue.
Updated patch which adds a sanity check suggested by Mathias
Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ludwig Nussel [Tue, 8 Nov 2011 00:19:51 +0000 (11:19 +1100)]
x86: fix mmap random address range
On x86_32 casting the unsigned int result of get_random_int() to long may
result in a negative value. On x86_32 the range of mmap_rnd() therefore
was -255 to 255. The 32bit mode on x86_64 used 0 to 255 as intended.
The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January
2008.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shérab [Tue, 8 Nov 2011 00:19:51 +0000 (11:19 +1100)]
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Bligh [Tue, 8 Nov 2011 00:19:50 +0000 (11:19 +1100)]
net/netfilter/nf_conntrack_netlink.c: fix Oops on container destroy
Problem:
A repeatable Oops can be caused if a container with networking
unshared is destroyed when it has nf_conntrack entries yet to expire.
A copy of the oops follows below. A perl program generating the oops
repeatably is attached inline below.
Analysis:
The oops is called from cleanup_net when the namespace is
destroyed. conntrack iterates through outstanding events and calls
death_by_timeout on each of them, which in turn produces a call to
ctnetlink_conntrack_event. This calls nf_netlink_has_listeners, which
oopses because net->nfnl is NULL.
The perl program generates the container through fork() then
clone(NS_NEWNET). I does not explicitly set up netlink
explicitly set up netlink, but I presume it was set up else net->nfnl
would have been NULL earlier (i.e. when an earlier connection
timed out). This would thus suggest that net->nfnl is made NULL
during the destruction of the container, which I think is done by
nfnetlink_net_exit_batch.
I can see that the various subsystems are deinitialised in the opposite
order to which the relevant register_pernet_subsys calls are called,
and both nf_conntrack and nfnetlink_net_ops register their relevant
subsystems. If nfnetlink_net_ops registered later than nfconntrack,
then its exit routine would have been called first, which would cause
the oops described. I am not sure there is anything to prevent this
happening in a container environment.
Whilst there's perhaps a more complex problem revolving around ordering
of subsystem deinit, it seems to me that missing a netlink event on a
container that is dying is not a disaster. An early check for net->nfnl
being non-NULL in ctnetlink_conntrack_event appears to fix this. There
may remain a potential race condition if it becomes NULL immediately
after being checked (I am not sure any lock is held at this point or
how synchronisation for subsystem deinitialization works).
Patch:
The patch attached should apply on everything from 2.6.26 (if not before)
onwards; it appears to be a problem on all kernels. This was taken against
Ubuntu-3.0.0-11.17 which is very close to 3.0.4. I have torture-tested it
with the above perl script for 15 minutes or so; the perl script hung the
machine within 20 seconds without this patch.
Applicability:
If this is the right solution, it should be applied to all stable kernels
as well as head. Apart from the minor overhead of checking one variable
against NULL, it can never 'do the wrong thing', because if net->nfnl
is NULL, an oops will inevitably result. Therefore, checking is a reasonable
thing to do unless it can be proven than net->nfnl will never be NULL.
Check net->nfnl for NULL in ctnetlink_conntrack_event to avoid Oops on
container destroy
Signed-off-by: Alex Bligh <alex@alex.org.uk> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log