Dave Airlie [Thu, 13 Jul 2017 01:21:16 +0000 (11:21 +1000)]
Merge tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel into drm-next
drm/i915 fixes for v4.13-rc1
* tag 'drm-intel-next-fixes-2017-07-11' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Make DP-MST connector info work
drm/i915/gvt: Use fence error from GVT request for workload status
drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
drm/i915/gvt: Revert "drm/i915/gvt: Fix possible recursive locking issue"
drm/i915/gvt: Audit the command buffer address
drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
drm/i915/fbdev: Check for existence of ifbdev->vma before operations
drm/i915: Hold RPM wakelock while initializing OA buffer
drm/i915/cnl: Fix the CURSOR_COEFF_MASK used in DDI Vswing Programming
drm/i915/cfl: Fix Workarounds.
drm/i915: Avoid undefined behaviour of "u32 >> 32"
drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
drm/i915: Fix an error checking test
drm/i915: Disable MSI for all pre-gen5
drm/i915/gvt: Make function dpy_reg_mmio_readx safe
drm/i915/gvt: Don't read ADPA_CRT_HOTPLUG_MONITOR from host
drm/i915/gvt: Set initial PORT_CLK_SEL vreg for BDW
drm/i915/gvt: Fix inconsistent locks holding sequence
drm/i915/gvt: Fix possible recursive locking issue
Dave Airlie [Thu, 13 Jul 2017 01:00:20 +0000 (11:00 +1000)]
Merge branch 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
This include new color format support and some fixups.
* 'mediatek-drm-next-4.13' of https://github.com/ckhu-mediatek/linux.git-tags:
drm/mediatek: separate color module to fixup error memory reallocation
drm/mediatek: check for memory allocation failure
drm/mediatek: re-phrase DRM_INFO error message
drm/mediatek: use platform_register_drivers
drm/mediatek: Support UYVY and YUYV format for overlay
Jani Nikula [Tue, 11 Jul 2017 09:52:14 +0000 (12:52 +0300)]
Merge tag 'gvt-fixes-2017-07-11' of https://github.com/01org/gvt-linux into drm-intel-next-fixes
gvt-fixes-2017-07-11
- Revert "drm/i915/gvt: Fix possible recursive locking issue" (Chuanxiao),
which is incomplete fix and it's actually VFIO issue, so revert.
- remove unneeded scheduler mutex for performance fix (Weinan)
- other misc error handling fix and cmd address audit
Commit 9a148a96fc3a ("drm/i915/debugfs: add dp mst info") adds support
for DP-MST to intel_connector_info, but forgot to remove the early
return for DP-MST.
Chuanxiao Dong [Fri, 23 Jun 2017 05:01:11 +0000 (13:01 +0800)]
drm/i915/gvt: Use fence error from GVT request for workload status
The req->fence.error will be set if this request caused GPU hang so
we can use this value to workload->status to indicate whether this
GVT request caused any problem. If it caused GPU hang, we shouldn't
trigger any context switch back to the guest.
v2:
- only take -EIO from fence->error. (Zhenyu)
Fixes: 8f1117abb408 (drm/i915/gvt: handle workload lifecycle properly) Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Weinan Li [Mon, 19 Jun 2017 00:49:17 +0000 (08:49 +0800)]
drm/i915/gvt: remove scheduler_mutex in per-engine workload_thread
For the vGPU workloads, now GVT-g use per vGPU scheduler, the per-ring
work_thread only pick workload belongs to the current vGPU. And with time
slice based scheduler, it waits all the engines become idle before do vGPU
switch. So we can run free dispatch in per-ring work_thread, different ring
running in different 'vGPU' won't happen.
For the workloads between vGPU and Host, this scheduler_mutex can't block
host to dispatch workload into other ring engines.
Here remove this mutex since it impacts the performance when applications
use more than 1 ring engines in 1 vgpu.
ring0 running in vGPU1, ring1 running in Host. Will happen.
ring0 running in vGPU1, ring1 running in vGPU2. Won't happen.
Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Ping Gao <ping.a.gao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The rwsem recursive trace should not be fixed from kvmgt side by using
a workqueue and it is an issue should be fixed in VFIO. So this one
should be reverted.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
drm/i915/gvt: Fix a memory leak in intel_gvt_init_gtt()
It will causes memory leak, if the function setup_spt_oos() fail,
in the function intel_gvt_init_gtt(),
which allocated by get_zeroed_page() and mapped by dma_map_page().
Unmap and free the page, after STP oos initialize fail,
it will fix this issue.
Signed-off-by: Zhou, Wenjia <zhiyuan_zhu@htc.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Chris Wilson [Thu, 22 Jun 2017 16:02:11 +0000 (17:02 +0100)]
drm/i915/fbdev: Check for existence of ifbdev->vma before operations
Commit fabef825626d ("drm/i915: Drop struct_mutex around frontbuffer
flushes") adds a dependency to ifbdev->vma when flushing the framebufer,
but the checks are only against the existence of the ifbdev->fb and not
against ifbdev->vma. This leaves a window of opportunity where we may
try to operate on the fbdev prior to it being probed (thanks to
asynchronous booting).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101534 Fixes: fabef825626d ("drm/i915: Drop struct_mutex around frontbuffer flushes") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170622160211.783-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org
(cherry picked from commit 15727ed0d944ce1dec8b9e1082dd3df29a0fdf44) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Wed, 5 Jul 2017 20:12:44 +0000 (21:12 +0100)]
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
the drm_file parameter is unused, so remove it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 6 Jul 2017 01:10:29 +0000 (11:10 +1000)]
Merge branch 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux into drm-next
Fixes for 4.13:
- Various fixes for Raven
- Various fixes for Vega10
- Stability fixes for KIQ
- Fix reloading the driver
- Fix S3 on vega10
- Misc other fixes
* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
drm/amdgpu: enable mmhub pg on raven
...
Rex Zhu [Tue, 4 Jul 2017 08:35:59 +0000 (16:35 +0800)]
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
when hw_fini, pp will disable dpm.so remove sysfs before
disable dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 4 Jul 2017 05:57:33 +0000 (01:57 -0400)]
drm/amdgpu/gfx9: fix driver reload with KIQ
Drop the KCQ disabling via KIQ. We disable the MEC shortly
after anyway, so there is no need to wait for all of this.
Doing so seems to leave the MEC in a bad way.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 4 Jul 2017 05:47:00 +0000 (01:47 -0400)]
drm/amdgpu/gfx8: fix driver reload with KIQ
Drop the deactivation in KIQ init and drop the KCQ disabling
via KIQ. We disable the MEC shortly after anyway, so there is
no need to wait for all of this. Doing so seems to leave the
MEC in a bad way.
Tested-by: Michel Dänzer <michel.daenzer@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Brooks [Mon, 3 Jul 2017 18:05:35 +0000 (14:05 -0400)]
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
amd_powerplay_destroy() expects a handle pointing to a struct pp_instance.
On chips without PowerPlay, pp_handle points to a struct amdgpu_device. The
resulting attempt to kfree() fields of the wrong struct ends in fire:
Fixes: 1c8638024846 (drm/amd/powerplay: refine powerplay interface.) Signed-off-by: John Brooks <john@fastquake.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
John Brooks [Mon, 3 Jul 2017 18:05:34 +0000 (14:05 -0400)]
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
We unref the man->move fence in ttm_bo_clean_mm() and then call
ttm_bo_force_list_clean() which waits on it, except the refcount is now
zero so a warning is generated (or worse):
v2: Set man->move to NULL after dropping the last ref (Christian König)
Fixes: aff98ba1fdb8 (drm/ttm: wait for eviction in ttm_bo_force_list_clean) Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/i915: Hold RPM wakelock while initializing OA buffer
OA buffer initialization involves access to HW registers to set
the OA base, head and tail. Ensure device is awake while setting
these. With this, all oa.ops are covered under RPM and forcewake
wakelock.
Rodrigo Vivi [Mon, 19 Jun 2017 21:21:47 +0000 (14:21 -0700)]
drm/i915/cfl: Fix Workarounds.
During the review of Coffee Lake workarounds Mika pointed out
that WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC
should be removed from CFL and with that I should carry the rv-b.
However when doing the v2 I removed another Workaround that should
remain because although not mentioned by spec the history of hangs
around it advocates on its favor.
On some follow-up patches I continued operating on the wrong
workardound, but Ville noticed that, so here is the fix for the
current CFL code that is upstream already.
Fixes: 46c26662d2f ("drm/i915/cfl: Introduce Coffee Lake workarounds.") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit 98eed3d1ade53596e1c8785e049f03da4480a820) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 29 Jun 2017 15:04:25 +0000 (16:04 +0100)]
drm/i915: Avoid undefined behaviour of "u32 >> 32"
When computing a hash for looking up relocation target handles in an
execbuf, we start with a large size for the hashtable and proceed to
halve it until the allocation succeeds. The final attempt is with an
order of 0 (i.e. a single element). This means that we then pass bits=0
to hash_32() which then computes "hash >> (32 - 0)" to lookup the single
element. Right shifting a value by the width of the operand is
undefined, so limit the smallest hash table we use to order 1.
v2: Keep the retry allocation flag for the final pass
drm/i915: reintroduce VLV/CHV PFI programming power domain workaround
There are still cases on these platforms where an attempt is made to
configure the CDCLK while the power domain is off, like when coming back
from a suspend. So the workaround below is still needed.
This effectively reverts commit 63ff30442519 ("drm/i915: Nuke the
VLV/CHV PFI programming power domain workaround").
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517 Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170628210605.4994-1-krisman@collabora.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 886015a0ad43c7fc034b23ea4614ba39162f9ddd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 26 Jun 2017 20:30:51 +0000 (23:30 +0300)]
drm/i915: Disable MSI for all pre-gen5
We have pretty clear evidence that MSIs are getting lost on g4x and
somehow the interrupt logic doesn't seem to recover from that state
even if we try hard to clear the IIR.
Disabling IER around the normal IIR clearing in the irq handler isn't
sufficient to avoid this, so the problem really seems to be further
up the interrupt chain. This should guarantee that there's always
an edge if any IIR bits are set after the interrupt handler is done,
which should normally guarantee that the CPU interrupt is generated.
That approach seems to work perfectly on VLV/CHV, but apparently
not on g4x.
MSI is documented to be broken on 965gm at least. The chipset spec
says MSI is defeatured because interrupts can be delayed or lost,
which fits well with what we're seeing on g4x. Previously we've
already disabled GMBUS interrupts on g4x because somehow GMBUS
manages to raise legacy interrupts even when MSI is enabled.
Since there's such widespread MSI breakahge all over in the pre-gen5
land let's just give up on MSI on these platforms.
Seqno reporting might be negatively affected by this since the legcy
interrupts aren't guaranteed to be ordered with the seqno writes,
whereas MSI interrupts may be? But an occasioanlly missed seqno
seems like a small price to pay for generally working interrupts.
Alex Deucher [Fri, 30 Jun 2017 13:58:34 +0000 (09:58 -0400)]
drm/amdgpu/cgs: always set reference clock in mode_info
It's relevent regardless of whether there are displays
enabled. Fixes garbage values for ref clock in powerplay
leading to incorrect fan speed reporting when displays
are disabled.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101653 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Alex Deucher [Thu, 29 Jun 2017 20:08:49 +0000 (16:08 -0400)]
drm/amdgpu: fix vblank_time when displays are off
If the displays are off, set the vblank time to max to make
sure mclk switching is enabled. Avoid mclk getting set
to high when no displays are attached.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101528
fixes: 09be4a5219 (drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)) Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Eric Huang [Tue, 27 Jun 2017 15:29:09 +0000 (11:29 -0400)]
drm/amd/powerplay: power value format change for Vega10
Power value is an integer on vega10.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 26 Jun 2017 15:41:33 +0000 (11:41 -0400)]
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
To follow up SMU FW 28.35.0.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Xie [Tue, 20 Jun 2017 20:35:04 +0000 (16:35 -0400)]
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
The function is called only once inside the .c file.
v2: update the commit message (Michel)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Xie [Tue, 20 Jun 2017 20:33:02 +0000 (16:33 -0400)]
drm/amdgpu/cs: fix a typo in a comment
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Tue, 20 Jun 2017 03:08:35 +0000 (11:08 +0800)]
drm/amdgpu: Fix the exported always on CU bitmap
Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.
v2: keep cu_ao_mask for backward compatibility.
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Wed, 21 Jun 2017 21:51:02 +0000 (23:51 +0200)]
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
The debugfs interface has calls a function that was evidently
defined under the wrong name in some configurations:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:64:12: error: 'amdgpu_debugfs_test_ib_ring_init' used but never defined [-Werror]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3803:12: error: 'amdgpu_debugfs_test_ib_init' defined but not used [-Werror=unused-function]
This fixes the function name.
Fixes: 4f0955fcc052 ("drm/amdgpu: export test ib debugfs interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 19 Jun 2017 09:11:41 +0000 (17:11 +0800)]
drm/amd/powerplay: add support for ATOM GFXCLK table v2.
New vbios table format on some boards.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changbin Du [Tue, 13 Jun 2017 02:15:26 +0000 (10:15 +0800)]
drm/i915/gvt: Make function dpy_reg_mmio_readx safe
The dpy_reg_mmio_read_x functions directly copy 4 bytes data to the
target address with considering the length. If may cause the target
memory corrupted if the requested length less than 4 bytes. Fix it
for safety even we already have some checking to avoid this happen.
And for convince, the 3 functions are merged.
Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Dave Airlie [Wed, 28 Jun 2017 07:11:12 +0000 (17:11 +1000)]
Merge tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next
Just three minor fixups for stuff in -next.
* tag 'drm-intel-next-fixes-2017-06-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Clear execbuf's vma backpointer upon release
drm/i915: Pass the right flags to i915_vma_move_to_active()
drm/i915/cnl: Fix RMW on ddi vswing sequence.
Dave Airlie [Wed, 28 Jun 2017 07:08:12 +0000 (17:08 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
- a fix from Eric for synchronization with etnaviv exported dma-bufs
- thermal throttle support for newer GPU cores
- updated module clock gating to work around GPU errata
- a fix to restore userspace buffer cache performance
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: restore ETNA_PREP_NOSYNC behaviour
drm/etnaviv: implement cooling support for new GPU cores
drm/etnaviv: update MLCG disables with info from newer Vivante driver
drm/etnaviv: update common.xml.h
drm/etnaviv: Expose our reservation object when exporting a dmabuf.
drm/mediatek: separate color module to fixup error memory reallocation
Previous patch (c5f228ef6c drm/mediatek: add *driver_data for different
hardware settings) calls devm_kfree() and then devm_kzalloc() to
reallocate color module data structure. But this reallocation cannnot
guarantee the new address is unchanged, but the caller will use the
old address, which is wrong.
Fix it by separate color module from general components, this patch
separate color module to independent files, like mtk_disp_ovl.c and
mtk_disp_rdma.c do
Fixes: c5f228ef6ccd ("drm/mediatek: add *driver_data for different hardware settings") Signed-off-by: YT Shen <yt.shen@mediatek.com> Tested-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek>
If 'devm_kmalloc_array' returns NULL, we should return -ENOMEM as already
done a few lines above instead of deferencing a NULL pointer a few lines
below.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
Xiong Zhang [Tue, 27 Jun 2017 18:03:16 +0000 (02:03 +0800)]
drm/i915/gvt: Don't read ADPA_CRT_HOTPLUG_MONITOR from host
When host connects a crt screen, linux guest will detect two
screens: crt and dp. This is wrong as linux guest has only
one dp.
In order to avoid guest get host crt screen, we should set
ADPA_CRT_HOTPLUG_MONITOR to none. But MMIO_RO(PCH_ADPA) prevent
from that. So MMIO_DH should be used instead of MMIO_RO.
v2: Clear its staus to none at initialize, so guest don't
get host crt.(Zhangyu)
v3: SKL doesn't have this register, limit it to pre_skl.(xiong)
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Xiong Zhang [Tue, 20 Jun 2017 03:37:22 +0000 (11:37 +0800)]
drm/i915/gvt: Set initial PORT_CLK_SEL vreg for BDW
On BDW, when host physical screen and guest virtual screen aren't on
the same DDI port, guest i915 driver prints the following error and
stop running.
[ 6.775873] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000068
[ 6.775928] IP: intel_ddi_clock_get+0x81/0x430 [i915]
[ 6.776206] Call Trace:
[ 6.776233] ? vgpu_read32+0x4f/0x100 [i915]
[ 6.776264] intel_ddi_get_config+0x11c/0x230 [i915]
[ 6.776298] intel_modeset_setup_hw_state+0x313/0xd40 [i915]
[ 6.776334] intel_modeset_init+0xe49/0x18d0 [i915]
[ 6.776368] ? vgpu_write32+0x53/0x100 [i915]
[ 6.776731] ? intel_i2c_reset+0x42/0x50 [i915]
[ 6.777085] ? intel_setup_gmbus+0x32a/0x350 [i915]
[ 6.777427] i915_driver_load+0xabc/0x14d0 [i915]
[ 6.777768] i915_pci_probe+0x4f/0x70 [i915]
The null pointer is guest intel_crtc_state->shared_dpll which is
setted in haswell_get_ddi_pll(). When guest and host screen are
on different DDI port, host driver won't set PORT_CLK_SET(guest_port),
so haswell_get_ddi_pll() will return null and don't set
pipe_config->shared_dpll, once the following program refernce this
structure, it will print the above error.
This patch set the initial val of guest PORT_CLK_SEL(guest_port) to
LCPLL_810. And guest i915 driver will reset this value according to
guest screen mode.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Chris Wilson [Thu, 22 Jun 2017 10:47:22 +0000 (11:47 +0100)]
drm/i915: Clear execbuf's vma backpointer upon release
commit 2889caa92321 ("drm/i915: Eliminate lots of iterations over the
execobjects array") jiggled around the error handling and replace a test
that we cleaned up properly after ourselves with an assertion. That
assertion failed because in the release function (moments after the
assertion) we were indeed forgetting to mark the vma as cleared. The
consequence was when testing an invalid relocation address, we would try
to release the vma twice (following the couple of attempts to verify the
address) and on the second release notice that the first release was
incomplete.
Testcase: igt/gem_reloc_overflow/invalid-address Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170622104722.2583-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 51d05e1b29676a0425749a1533b87e3ad3c6f176) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 20 Jun 2017 12:43:20 +0000 (13:43 +0100)]
drm/i915: Pass the right flags to i915_vma_move_to_active()
i915_vma_move_to_active() takes the execobject flags and not a boolean!
Instead of passing EXEC_OBJECT_WRITE we passed true [i.e.
EXEC_OBJECT_NEEDS_FENCE] causing us to start tracking the
vma->last_fence access and since we forgot to clear that on unbinding,
we caused a use-after-free.
[ 321.263854] BUG: KASAN: use-after-free in i915_gem_request_retire+0x1728/0x1740 [i915]
[ 321.264001] Read of size 8 at addr ffff880100fc67d8 by task gem_exec_reloc/2868
One is in the thread which is started by vfio ioctl to do
the iommu unmapping. The locking sequence is:
down_read(&group_lock) ----> mutex_lock(&cached_lock)
The other is in the vfio release thread which will unpin all
the cached pages. The lock sequence is:
mutex_lock(&cached_lock) ---> down_read(&group_lock)
And, the cache_lock is used to protect the rb tree of the cache
node and doing vfio unpin doesn't require this lock. Move the
vfio unpin out of the cache_lock protected region.
v2:
- use for style instead of do{}while(1). (Zhenyu)
Linus Torvalds [Sun, 25 Jun 2017 18:59:19 +0000 (11:59 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:
- Plug a subtle race due to a missing READ_ONCE() in the timekeeping
code where reloading of a pointer results in an inconsistent
callback argument being supplied to the clocksource->read function.
- Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
time keeping core code, to prevent a possible discontuity.
- Apply a similar fix to the arm64 vdso clock_gettime()
implementation
- Add missing includes to clocksource drivers, which relied on
indirect includes which fails in certain configs.
- Use the proper iomem pointer for read/iounmap in a probe function"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
time: Fix clock->read(clock) race around clocksource changes
clocksource: Explicitly include linux/clocksource.h when needed
clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
Linus Torvalds [Sun, 25 Jun 2017 18:55:21 +0000 (11:55 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- Return the proper error code if aux buffers for a event are not
supported.
- Calculate the probe offset for inlined functions correctly
- Update the Skylake DTLB load/store miss event so it can count 1G
TLB entries as well"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix probe definition for inlined functions
perf/x86/intel: Add 1G DTLB load/store miss support for SKL
perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
Linus Torvalds [Sun, 25 Jun 2017 17:39:43 +0000 (10:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 to ignore timeout bit on Lifebook AH544
- a fixup to Synaptics RMI function 54 that was breaking some Dells
- a fix for memory leak in soc_button_array driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - only read the F54 query registers which are used
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
Input: soc_button_array - fix leaking the ACPI button descriptor buffer
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc7 that have been queued
up for the last 2 weeks. This includes:
- Fix a TMR related kref underflow detected by the recent refcount_t
conversion in upstream.
- Fix a iscsi-target corner case during explicit connection logout
timeout failure.
- Address last fallout in iscsi-target immediate data handling from
v4.4 target-core now allowing control CDB payload underflow"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
target: Fix kref->refcount underflow in transport_cmd_finish_abort
Linus Torvalds [Sat, 24 Jun 2017 23:18:00 +0000 (16:18 -0700)]
Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:
- fix warnings of host programs
- fix "make tags" when COMPILED_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment"
* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix sparse warnings in nconfig
kbuild: fix header installation under fakechroot environment
kconfig: Check for libncurses before menuconfig
Kbuild: tiny correction on `make help`
tags: honor COMPILED_SOURCE with apart output directory
genksyms: add printf format attribute to error_with_pos()
Linus Torvalds [Sat, 24 Jun 2017 09:24:53 +0000 (02:24 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
from posix timers that has existed since posix timers have been in the
kernel.
This patch is slightly simpler than my earlier version of this patch
as I discovered in testing that I had misspelled "#ifdef
CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
setting of resched_timer uncondtional.
I have tested this and verified that without this patch there is a
nasty hang that is easy to trigger, and with this patch everything
works properly"
Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
I missed.
Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Only reschedule timers on signals timers have sent
Thomas Gleixner [Fri, 23 Jun 2017 08:50:38 +0000 (10:50 +0200)]
x86/mshyperv: Remove excess #includes from mshyperv.h
A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.
The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.
Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.
Remove the includes and unbreak the build.
Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: devel@linuxdriverproject.org Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 24 Jun 2017 00:53:16 +0000 (17:53 -0700)]
Merge tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.12. Most of these actually came in last
week but got held up for some more testing.
- three fixes for kprobes/ftrace/livepatch interactions.
- properly handle data breakpoints when using the Radix MMU.
- fix for perf sampling of registers during call_usermodehelper().
- properly initialise the thread_info on our emergency stacks
- add an explicit flush when doing TLB invalidations for a process
using NPU2.
Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
Bangoria, Masami Hiramatsu"
* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Initialise thread_info for emergency stacks
powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
powerpc/perf: Fix oops when kthread execs user process
powerpc/64s: Handle data breakpoints in Radix mode
powerpc/kprobes: Skip livepatch_handler() for jprobes
powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Linus Torvalds [Sat, 24 Jun 2017 00:49:12 +0000 (17:49 -0700)]
Merge tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes the ACPI-based enumeration of some I2C and SPI devices
broken in 4.11.
Specifics:
- I2C and SPI devices are expected to be enumerated by the I2C and
SPI subsystems, respectively, but due to a change made during the
4.11 cycle, in some cases the ACPI core marks them as already
enumerated which causes the I2C and SPI subsystems to overlook
them, so fix that (Jarkko Nikula)"
* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Fix enumeration for special SPI and I2C devices
Linus Torvalds [Sat, 24 Jun 2017 00:40:41 +0000 (17:40 -0700)]
Merge tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
Linus Torvalds [Sat, 24 Jun 2017 00:37:56 +0000 (17:37 -0700)]
Merge tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing exciting here, just a few stable fixes:
- suppress spurious kernel WARNING in PCM core
- fix potential spin deadlock at error handling in firewire
- HD-audio PCI ID addition / fixup"
* tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Apply quirks to Broxton-T, too
ALSA: firewire-lib: Fix stall of process context at packet error
ALSA: pcm: Don't treat NULL chmap as a fatal error
ALSA: hda - Add Coffelake PCI ID
Linus Torvalds [Sat, 24 Jun 2017 00:35:57 +0000 (17:35 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A varied bunch of fixes, one for an API regression with connectors.
Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
ones being the most important"
* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
drm: Fix GETCONNECTOR regression
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/radeon: add a PX quirk for another K53TK variant
drm/amdgpu: adjust default display clock
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: add Polaris12 DID
drm/i915: Don't enable backlight at setup time.
drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
drm/i915: Fix deadlock witha the pipe A quirk during resume
drm/i915: Remove __GFP_NORETRY from our buffer allocator
drm/i915: Encourage our shrinker more when our shmemfs allocations fails
drm/i915: Differentiate between sw write location into ring and last hw read
Linus Torvalds [Sat, 24 Jun 2017 00:32:05 +0000 (17:32 -0700)]
Merge tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a revert of a DM mirror commit that has proven to make the code prone
to crash
- a DM io reference count fix that resolves a NULL pointer seen when
issuing discards to a DM mirror target's device whose mirror legs do
not all support discards
- a couple DM integrity fixes
* tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm io: fix duplicate bio completion due to missing ref count
dm integrity: fix to not disable/enable interrupts from interrupt context
Revert "dm mirror: use all available legs on multiple failures"
dm integrity: reject mappings too large for device
Linus Torvalds [Fri, 23 Jun 2017 23:30:52 +0000 (16:30 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/exec.c: account for argv/envp pointers
ocfs2: fix deadlock caused by recursive locking in xattr
slub: make sysfs file removal asynchronous
lib/cmdline.c: fix get_options() overflow while parsing ranges
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
mm, thp: remove cond_resched from __collapse_huge_page_copy
Kees Cook [Fri, 23 Jun 2017 22:08:57 +0000 (15:08 -0700)]
fs/exec.c: account for argv/envp pointers
When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included. This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.
For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).
The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely. Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).
[akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea39318 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Ren [Fri, 23 Jun 2017 22:08:55 +0000 (15:08 -0700)]
ocfs2: fix deadlock caused by recursive locking in xattr
Another deadlock path caused by recursive locking is reported. This
kind of issue was introduced since commit 743b5f1434f5 ("ocfs2: take
inode lock in ocfs2_iop_set/get_acl()"). Two deadlock paths have been
fixed by commit b891fa5024a9 ("ocfs2: fix deadlock issue when taking
inode lock at vfs entry points"). Yes, we intend to fix this kind of
case in incremental way, because it's hard to find out all possible
paths at once.
This one can be reproduced like this. On node1, cp a large file from
home directory to ocfs2 mountpoint. While on node2, run
setfacl/getfacl. Both nodes will hang up there. The backtraces:
Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is
exported by commit 439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic
to avoid recursive cluster lock").
Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()") Signed-off-by: Eric Ren <zren@suse.com> Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Fri, 23 Jun 2017 22:08:52 +0000 (15:08 -0700)]
slub: make sysfs file removal asynchronous
Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from
sysfs_slab_remove()") made slub sysfs file removals synchronous to
kmem_cache shutdown.
Unfortunately, this created a possible ABBA deadlock between slab_mutex
and sysfs draining mechanism triggering the following lockdep warning.
======================================================
[ INFO: possible circular locking dependency detected ]
4.10.0-test+ #48 Not tainted
-------------------------------------------------------
rmmod/1211 is trying to acquire lock:
(s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40
but task is already holding lock:
(slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
It'd be the cleanest to deal with the issue by removing sysfs files
without holding slab_mutex before the rest of shutdown; however, given
the current code structure, it is pretty difficult to do so.
This patch punts sysfs file removal to a work item. Before commit bf5eb3de3847, the removal was punted to a RCU delayed work item which is
executed after release. Now, we're punting to a different work item on
shutdown which still maintains the goal removing the sysfs files earlier
when destroying kmem_caches.
Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lib/cmdline.c: fix get_options() overflow while parsing ranges
When using get_options() it's possible to specify a range of numbers,
like 1-100500. The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.
Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 23 Jun 2017 22:08:46 +0000 (15:08 -0700)]
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing. Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks. Update index properly.
Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz Fixes: 9973c98ecfda3 ("dax: add support for fsync/sync") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Fri, 23 Jun 2017 22:08:41 +0000 (15:08 -0700)]
mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
Existing code that uses vmalloc_to_page() may assume that any address
for which is_vmalloc_addr() returns true may be passed into
vmalloc_to_page() to retrieve the associated struct page.
This is not un unreasonable assumption to make, but on architectures
that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need
to ensure that vmalloc_to_page() does not go off into the weeds trying
to dereference huge PUDs or PMDs as table entries.
Given that vmalloc() and vmap() themselves never create huge mappings or
deal with compound pages at all, there is no correct answer in this
case, so return NULL instead, and issue a warning.
When reading /proc/kcore on arm64, you will hit an oops as soon as you
hit the huge mappings used for the various segments that make up the
mapping of vmlinux. With this patch applied, you will no longer hit the
oops, but the kcore contents willl be incorrect (these regions will be
zeroed out)
We are fixing this for kcore specifically, so it avoids vread() for
those regions. At least one other problematic user exists, i.e.,
/dev/kmem, but that is currently broken on arm64 for other reasons.
Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 23 Jun 2017 22:08:38 +0000 (15:08 -0700)]
mm, thp: remove cond_resched from __collapse_huge_page_copy
This is a partial revert of commit 338a16ba1549 ("mm, thp: copying user
pages must schedule on collapse") which added a cond_resched() to
__collapse_huge_page_copy().
On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in
atomic context and thus scheduling is not possible. This is only a
possible config on arm and i386.
Although need_resched has been shown to be set for over 100 jiffies
while doing the iteration in __collapse_huge_page_copy, this is better
than doing
if (in_atomic())
cond_resched()
to cover only non-CONFIG_HIGHPTE configs.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 23 Jun 2017 19:25:37 +0000 (12:25 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.
The driver already prints a warning message, there's no need to panic
users by printing something that looks like an oops as well"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Remove WARN_ON from clear task context.
scsi: qedi: Remove WARN_ON for untracked cleanup.
Linus Torvalds [Fri, 23 Jun 2017 19:23:06 +0000 (12:23 -0700)]
Merge tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I have one more bugfix for you for 4.12-rc7 to fix a disk corruption
problem:
- don't allow swapon on files on the realtime device, because the
swap code will swap pages out to blocks on the data device, thereby
corrupting the filesystem"
* tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't allow bmap on rt files
Andrew Duggan [Fri, 23 Jun 2017 07:04:51 +0000 (00:04 -0700)]
Input: synaptics-rmi4 - only read the F54 query registers which are used
The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.
Previous issues with the I2C controller or touchpad were addressed in:
commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dave Airlie [Fri, 23 Jun 2017 04:53:44 +0000 (14:53 +1000)]
Merge tag 'hdlcd-for-v4.13-v3' of git://linux-arm.org/linux-ld into drm-next
hdlcd fixes.
* tag 'hdlcd-for-v4.13-v3' of git://linux-arm.org/linux-ld:
drm/arm: hdlcd: remove unused variables
drm/arm: hdlcd: Use CMA helper for plane buffer address calculation
drm/arm: hdlcd: Set the CRTC's port before binding the encoder.
Nicholas Piggin [Wed, 21 Jun 2017 05:58:29 +0000 (15:58 +1000)]
powerpc/64: Initialise thread_info for emergency stacks
Emergency stacks have their thread_info mostly uninitialised, which in
particular means garbage preempt_count values.
Emergency stack code runs with interrupts disabled entirely, and is
used very rarely, so this has been unnoticed so far. It was found by a
proposed new powerpc watchdog that takes a soft-NMI directly from the
masked_interrupt handler and using the emergency stack. That crashed
at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be
garbage.
To fix this, zero the entire THREAD_SIZE allocation, and initialize
the thread_info.
Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move it all into setup_64.c, use a function not a macro. Fix
crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Dave Airlie [Fri, 23 Jun 2017 01:44:51 +0000 (11:44 +1000)]
Merge tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
UAPI Changes:
- drm: Fix regression in GETCONNECTOR ioctl returning stale properties (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc:
drm: Fix GETCONNECTOR regression
Randy Dunlap [Tue, 23 May 2017 01:44:57 +0000 (18:44 -0700)]
kconfig: fix sparse warnings in nconfig
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Björn Töpel [Wed, 21 Jun 2017 16:41:34 +0000 (18:41 +0200)]
perf probe: Fix probe definition for inlined functions
In commit 613f050d68a8 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.
Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:
Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:
So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:
0x17be6 - 0x17a30 = 438
but above we have 876, which is twice as much.
Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
Linus Torvalds [Thu, 22 Jun 2017 18:16:55 +0000 (11:16 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various small fixes for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix some return values in case of error in 'crypt_message'
cifs: remove redundant return in cifs_creation_time_get
CIFS: Improve readdir verbosity
CIFS: check if pages is null rather than bv for a failed allocation
CIFS: Set ->should_dirty in cifs_user_readv()
projects / karo-tx-linux.git / log