]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
Merge remote-tracking branch 'nvdimm/libnvdimm-for-next'
[karo-tx-linux.git] / Documentation / devicetree / bindings / clock / renesas,cpg-mssr.txt
1 * Renesas Clock Pulse Generator / Module Standby and Software Reset
2
3 On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
4 and MSSR (Module Standby and Software Reset) blocks are intimately connected,
5 and share the same register block.
6
7 They provide the following functionalities:
8   - The CPG block generates various core clocks,
9   - The MSSR block provides two functions:
10       1. Module Standby, providing a Clock Domain to control the clock supply
11          to individual SoC devices,
12       2. Reset Control, to perform a software reset of individual SoC devices.
13
14 Required Properties:
15   - compatible: Must be one of:
16       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
17
18   - reg: Base address and length of the memory resource used by the CPG/MSSR
19     block
20
21   - clocks: References to external parent clocks, one entry for each entry in
22     clock-names
23   - clock-names: List of external parent clock names. Valid names are:
24       - "extal" (r8a7795)
25       - "extalr" (r8a7795)
26
27   - #clock-cells: Must be 2
28       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
29         and a core clock reference, as defined in
30         <dt-bindings/clock/*-cpg-mssr.h>.
31       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
32         a module number, as defined in the datasheet.
33
34   - #power-domain-cells: Must be 0
35       - SoC devices that are part of the CPG/MSSR Clock Domain and can be
36         power-managed through Module Standby should refer to the CPG device
37         node in their "power-domains" property, as documented by the generic PM
38         Domain bindings in
39         Documentation/devicetree/bindings/power/power_domain.txt.
40
41
42 Examples
43 --------
44
45   - CPG device node:
46
47         cpg: clock-controller@e6150000 {
48                 compatible = "renesas,r8a7795-cpg-mssr";
49                 reg = <0 0xe6150000 0 0x1000>;
50                 clocks = <&extal_clk>, <&extalr_clk>;
51                 clock-names = "extal", "extalr";
52                 #clock-cells = <2>;
53                 #power-domain-cells = <0>;
54         };
55
56
57   - CPG/MSSR Clock Domain member device node:
58
59         scif2: serial@e6e88000 {
60                 compatible = "renesas,scif-r8a7795", "renesas,scif";
61                 reg = <0 0xe6e88000 0 64>;
62                 interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
63                 clocks = <&cpg CPG_MOD 310>;
64                 clock-names = "sci_ick";
65                 dmas = <&dmac1 0x13>, <&dmac1 0x12>;
66                 dma-names = "tx", "rx";
67                 power-domains = <&cpg>;
68                 status = "disabled";
69         };