]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - Documentation/devicetree/bindings/display/msm/gpu.txt
Merge remote-tracking branch 'access_once/linux-next'
[karo-tx-linux.git] / Documentation / devicetree / bindings / display / msm / gpu.txt
1 Qualcomm adreno/snapdragon GPU
2
3 Required properties:
4 - compatible: "qcom,adreno-3xx"
5 - reg: Physical base address and length of the controller's registers.
6 - interrupts: The interrupt signal from the gpu.
7 - clocks: device clocks
8   See ../clocks/clock-bindings.txt for details.
9 - clock-names: the following clocks are required:
10   * "core_clk"
11   * "iface_clk"
12   * "mem_iface_clk"
13 - qcom,chipid: gpu chip-id.  Note this may become optional for future
14   devices if we can reliably read the chipid from hw
15 - qcom,gpu-pwrlevels: list of operating points
16   - compatible: "qcom,gpu-pwrlevels"
17   - for each qcom,gpu-pwrlevel:
18     - qcom,gpu-freq: requested gpu clock speed
19     - NOTE: downstream android driver defines additional parameters to
20       configure memory bandwidth scaling per OPP.
21
22 Example:
23
24 / {
25         ...
26
27         gpu: qcom,kgsl-3d0@4300000 {
28                 compatible = "qcom,adreno-3xx";
29                 reg = <0x04300000 0x20000>;
30                 reg-names = "kgsl_3d0_reg_memory";
31                 interrupts = <GIC_SPI 80 0>;
32                 interrupt-names = "kgsl_3d0_irq";
33                 clock-names =
34                     "core_clk",
35                     "iface_clk",
36                     "mem_iface_clk";
37                 clocks =
38                     <&mmcc GFX3D_CLK>,
39                     <&mmcc GFX3D_AHB_CLK>,
40                     <&mmcc MMSS_IMEM_AHB_CLK>;
41                 qcom,chipid = <0x03020100>;
42                 qcom,gpu-pwrlevels {
43                         compatible = "qcom,gpu-pwrlevels";
44                         qcom,gpu-pwrlevel@0 {
45                                 qcom,gpu-freq = <450000000>;
46                         };
47                         qcom,gpu-pwrlevel@1 {
48                                 qcom,gpu-freq = <27000000>;
49                         };
50                 };
51         };
52 };