arch/arm/boot/dts/exynos4412-trats2.dts

   1 /*
   2  * Samsung's Exynos4412 based Trats 2 board device tree source
   3  *
   4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   5  *              http://www.samsung.com
   6  *
   7  * Device tree source file for Samsung's Trats 2 board which is based on
   8  * Samsung's Exynos4412 SoC.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 /dts-v1/;
  16 #include "exynos4412.dtsi"
  17 #include "exynos4412-ppmu-common.dtsi"
  18 #include <dt-bindings/gpio/gpio.h>
  19 #include <dt-bindings/interrupt-controller/irq.h>
  20 #include <dt-bindings/clock/maxim,max77686.h>
  21
  22 / {
  23         model = "Samsung Trats 2 based on Exynos4412";
  24         compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
  25
  26         aliases {
  27                 i2c9 = &i2c_ak8975;
  28                 i2c10 = &i2c_cm36651;
  29                 i2c11 = &i2c_max77693;
  30                 i2c12 = &i2c_max77693_fuel;
  31         };
  32
  33         memory@40000000 {
  34                 device_type = "memory";
  35                 reg =  <0x40000000 0x40000000>;
  36         };
  37
  38         chosen {
  39                 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
  40                 stdout-path = &serial_2;
  41         };
  42
  43         firmware@0204F000 {
  44                 compatible = "samsung,secure-firmware";
  45                 reg = <0x0204F000 0x1000>;
  46         };
  47
  48         fixed-rate-clocks {
  49                 xxti {
  50                         compatible = "samsung,clock-xxti", "fixed-clock";
  51                         clock-frequency = <0>;
  52                 };
  53
  54                 xusbxti {
  55                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  56                         clock-frequency = <24000000>;
  57                 };
  58         };
  59
  60         regulators {
  61                 compatible = "simple-bus";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64
  65                 cam_io_reg: voltage-regulator-1 {
  66                         compatible = "regulator-fixed";
  67                         regulator-name = "CAM_SENSOR_A";
  68                         regulator-min-microvolt = <2800000>;
  69                         regulator-max-microvolt = <2800000>;
  70                         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  71                         enable-active-high;
  72                 };
  73
  74                 lcd_vdd3_reg: voltage-regulator-2 {
  75                         compatible = "regulator-fixed";
  76                         regulator-name = "LCD_VDD_2.2V";
  77                         regulator-min-microvolt = <2200000>;
  78                         regulator-max-microvolt = <2200000>;
  79                         gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  80                         enable-active-high;
  81                 };
  82
  83                 cam_af_reg: voltage-regulator-3 {
  84                         compatible = "regulator-fixed";
  85                         regulator-name = "CAM_AF";
  86                         regulator-min-microvolt = <2800000>;
  87                         regulator-max-microvolt = <2800000>;
  88                         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
  89                         enable-active-high;
  90                 };
  91
  92                 ps_als_reg: voltage-regulator-5 {
  93                         compatible = "regulator-fixed";
  94                         regulator-name = "LED_A_3.0V";
  95                         regulator-min-microvolt = <3000000>;
  96                         regulator-max-microvolt = <3000000>;
  97                         gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
  98                         enable-active-high;
  99                 };
 100         };
 101
 102         gpio-keys {
 103                 compatible = "gpio-keys";
 104
 105                 key-down {
 106                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 107                         linux,code = <114>;
 108                         label = "volume down";
 109                         debounce-interval = <10>;
 110                 };
 111
 112                 key-up {
 113                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <115>;
 115                         label = "volume up";
 116                         debounce-interval = <10>;
 117                 };
 118
 119                 key-power {
 120                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 121                         linux,code = <116>;
 122                         label = "power";
 123                         debounce-interval = <10>;
 124                         wakeup-source;
 125                 };
 126
 127                 key-ok {
 128                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 129                         linux,code = <139>;
 130                         label = "ok";
 131                         debounce-inteval = <10>;
 132                         wakeup-source;
 133                 };
 134         };
 135
 136         i2c_max77693: i2c-gpio-1 {
 137                 compatible = "i2c-gpio";
 138                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 139                 i2c-gpio,delay-us = <2>;
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 status = "okay";
 143
 144                 max77693@66 {
 145                         compatible = "maxim,max77693";
 146                         interrupt-parent = <&gpx1>;
 147                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 148                         reg = <0x66>;
 149
 150                         regulators {
 151                                 esafeout1_reg: ESAFEOUT1 {
 152                                         regulator-name = "ESAFEOUT1";
 153                                 };
 154                                 esafeout2_reg: ESAFEOUT2 {
 155                                         regulator-name = "ESAFEOUT2";
 156                                 };
 157                                 charger_reg: CHARGER {
 158                                         regulator-name = "CHARGER";
 159                                         regulator-min-microamp = <60000>;
 160                                         regulator-max-microamp = <2580000>;
 161                                 };
 162                         };
 163
 164                         max77693_haptic {
 165                                 compatible = "maxim,max77693-haptic";
 166                                 haptic-supply = <&ldo26_reg>;
 167                                 pwms = <&pwm 0 38022 0>;
 168                         };
 169
 170                         charger {
 171                                 compatible = "maxim,max77693-charger";
 172
 173                                 maxim,constant-microvolt = <4350000>;
 174                                 maxim,min-system-microvolt = <3600000>;
 175                                 maxim,thermal-regulation-celsius = <100>;
 176                                 maxim,battery-overcurrent-microamp = <3500000>;
 177                                 maxim,charge-input-threshold-microvolt = <4300000>;
 178                         };
 179                 };
 180         };
 181
 182         i2c_max77693_fuel: i2c-gpio-3 {
 183                 compatible = "i2c-gpio";
 184                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 185                 i2c-gpio,delay-us = <2>;
 186                 #address-cells = <1>;
 187                 #size-cells = <0>;
 188                 status = "okay";
 189
 190                 max77693-fuel-gauge@36 {
 191                         compatible = "maxim,max17047";
 192                         interrupt-parent = <&gpx2>;
 193                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 194                         reg = <0x36>;
 195
 196                         maxim,over-heat-temp = <700>;
 197                         maxim,over-volt = <4500>;
 198                 };
 199         };
 200
 201         i2c_ak8975: i2c-gpio-0 {
 202                 compatible = "i2c-gpio";
 203                 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 204                 i2c-gpio,delay-us = <2>;
 205                 #address-cells = <1>;
 206                 #size-cells = <0>;
 207                 status = "okay";
 208
 209                 ak8975@0c {
 210                         compatible = "asahi-kasei,ak8975";
 211                         reg = <0x0c>;
 212                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 213                 };
 214         };
 215
 216         i2c_cm36651: i2c-gpio-2 {
 217                 compatible = "i2c-gpio";
 218                 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 219                 i2c-gpio,delay-us = <2>;
 220                 #address-cells = <1>;
 221                 #size-cells = <0>;
 222
 223                 cm36651@18 {
 224                         compatible = "capella,cm36651";
 225                         reg = <0x18>;
 226                         interrupt-parent = <&gpx0>;
 227                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 228                         vled-supply = <&ps_als_reg>;
 229                 };
 230         };
 231
 232         camera: camera {
 233                 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 234                 pinctrl-names = "default";
 235                 status = "okay";
 236                 assigned-clocks = <&clock CLK_MOUT_CAM0>,
 237                                   <&clock CLK_MOUT_CAM1>;
 238                 assigned-clock-parents = <&clock CLK_XUSBXTI>,
 239                                          <&clock CLK_XUSBXTI>;
 240
 241
 242         };
 243
 244         sound {
 245                 compatible = "samsung,trats2-audio";
 246                 samsung,i2s-controller = <&i2s0>;
 247                 samsung,model = "Trats2";
 248                 samsung,audio-codec = <&wm1811>;
 249                 samsung,audio-routing =
 250                         "SPK", "SPKOUTLN",
 251                         "SPK", "SPKOUTLP",
 252                         "SPK", "SPKOUTRN",
 253                         "SPK", "SPKOUTRP";
 254         };
 255
 256         thermistor-ap {
 257                 compatible = "murata,ncp15wb473";
 258                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 259                 pullup-ohm = <100000>;   /* 100K */
 260                 pulldown-ohm = <100000>; /* 100K */
 261                 io-channels = <&adc 1>;  /* AP temperature */
 262         };
 263
 264         thermistor-battery {
 265                 compatible = "murata,ncp15wb473";
 266                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 267                 pullup-ohm = <100000>;   /* 100K */
 268                 pulldown-ohm = <100000>; /* 100K */
 269                 io-channels = <&adc 2>;  /* Battery temperature */
 270         };
 271
 272         thermal-zones {
 273                 cpu_thermal: cpu-thermal {
 274                         cooling-maps {
 275                                 map0 {
 276                                      /* Corresponds to 800MHz at freq_table */
 277                                      cooling-device = <&cpu0 7 7>;
 278                                 };
 279                                 map1 {
 280                                      /* Corresponds to 200MHz at freq_table */
 281                                      cooling-device = <&cpu0 13 13>;
 282                                };
 283                        };
 284                 };
 285         };
 286 };
 287
 288 &adc {
 289         vdd-supply = <&ldo3_reg>;
 290         status = "okay";
 291 };
 292
 293 &bus_dmc {
 294         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 295         vdd-supply = <&buck1_reg>;
 296         status = "okay";
 297 };
 298
 299 &bus_acp {
 300         devfreq = <&bus_dmc>;
 301         status = "okay";
 302 };
 303
 304 &bus_c2c {
 305         devfreq = <&bus_dmc>;
 306         status = "okay";
 307 };
 308
 309 &bus_leftbus {
 310         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 311         vdd-supply = <&buck3_reg>;
 312         status = "okay";
 313 };
 314
 315 &bus_rightbus {
 316         devfreq = <&bus_leftbus>;
 317         status = "okay";
 318 };
 319
 320 &bus_display {
 321         devfreq = <&bus_leftbus>;
 322         status = "okay";
 323 };
 324
 325 &bus_fsys {
 326         devfreq = <&bus_leftbus>;
 327         status = "okay";
 328 };
 329
 330 &bus_peri {
 331         devfreq = <&bus_leftbus>;
 332         status = "okay";
 333 };
 334
 335 &bus_mfc {
 336         devfreq = <&bus_leftbus>;
 337         status = "okay";
 338 };
 339
 340 &cpu0 {
 341         cpu0-supply = <&buck2_reg>;
 342 };
 343
 344 &csis_0 {
 345         status = "okay";
 346         vddcore-supply = <&ldo8_reg>;
 347         vddio-supply = <&ldo10_reg>;
 348         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 349                         <&clock CLK_SCLK_CSIS0>;
 350         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 351         assigned-clock-rates = <0>, <176000000>;
 352
 353         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 354         port@3 {
 355                 reg = <3>;
 356                 csis0_ep: endpoint {
 357                         remote-endpoint = <&s5c73m3_ep>;
 358                         data-lanes = <1 2 3 4>;
 359                         samsung,csis-hs-settle = <12>;
 360                 };
 361         };
 362 };
 363
 364 &csis_1 {
 365         status = "okay";
 366         vddcore-supply = <&ldo8_reg>;
 367         vddio-supply = <&ldo10_reg>;
 368         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 369                         <&clock CLK_SCLK_CSIS1>;
 370         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 371         assigned-clock-rates = <0>, <176000000>;
 372
 373         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 374         port@4 {
 375                 reg = <4>;
 376                 csis1_ep: endpoint {
 377                         remote-endpoint = <&is_s5k6a3_ep>;
 378                         data-lanes = <1>;
 379                         samsung,csis-hs-settle = <18>;
 380                         samsung,csis-wclk;
 381                 };
 382         };
 383 };
 384
 385 &dsi_0 {
 386         vddcore-supply = <&ldo8_reg>;
 387         vddio-supply = <&ldo10_reg>;
 388         samsung,burst-clock-frequency = <500000000>;
 389         samsung,esc-clock-frequency = <20000000>;
 390         samsung,pll-clock-frequency = <24000000>;
 391         status = "okay";
 392
 393         ports {
 394                 #address-cells = <1>;
 395                 #size-cells = <0>;
 396
 397                 port@1 {
 398                         reg = <1>;
 399
 400                         dsi_out: endpoint {
 401                                 remote-endpoint = <&dsi_in>;
 402                                 samsung,burst-clock-frequency = <500000000>;
 403                                 samsung,esc-clock-frequency = <20000000>;
 404                         };
 405                 };
 406         };
 407
 408         panel@0 {
 409                 compatible = "samsung,s6e8aa0";
 410                 reg = <0>;
 411                 vdd3-supply = <&lcd_vdd3_reg>;
 412                 vci-supply = <&ldo25_reg>;
 413                 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 414                 power-on-delay= <50>;
 415                 reset-delay = <100>;
 416                 init-delay = <100>;
 417                 flip-horizontal;
 418                 flip-vertical;
 419                 panel-width-mm = <58>;
 420                 panel-height-mm = <103>;
 421
 422                 display-timings {
 423                         timing-0 {
 424                                 clock-frequency = <57153600>;
 425                                 hactive = <720>;
 426                                 vactive = <1280>;
 427                                 hfront-porch = <5>;
 428                                 hback-porch = <5>;
 429                                 hsync-len = <5>;
 430                                 vfront-porch = <13>;
 431                                 vback-porch = <1>;
 432                                 vsync-len = <2>;
 433                         };
 434                 };
 435
 436                 port {
 437                         dsi_in: endpoint {
 438                                 remote-endpoint = <&dsi_out>;
 439                         };
 440                 };
 441         };
 442 };
 443
 444 &exynos_usbphy {
 445         vbus-supply = <&esafeout1_reg>;
 446         status = "okay";
 447 };
 448
 449 &fimc_0 {
 450         status = "okay";
 451         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 452                         <&clock CLK_SCLK_FIMC0>;
 453         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 454         assigned-clock-rates = <0>, <176000000>;
 455 };
 456
 457 &fimc_1 {
 458         status = "okay";
 459         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 460                         <&clock CLK_SCLK_FIMC1>;
 461         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 462         assigned-clock-rates = <0>, <176000000>;
 463 };
 464
 465 &fimc_2 {
 466         status = "okay";
 467         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 468                         <&clock CLK_SCLK_FIMC2>;
 469         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 470         assigned-clock-rates = <0>, <176000000>;
 471 };
 472
 473 &fimc_3 {
 474         status = "okay";
 475         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 476                         <&clock CLK_SCLK_FIMC3>;
 477         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 478         assigned-clock-rates = <0>, <176000000>;
 479 };
 480
 481 &fimc_is {
 482         pinctrl-0 = <&fimc_is_uart>;
 483         pinctrl-names = "default";
 484         status = "okay";
 485
 486         i2c1_isp: i2c-isp@12140000 {
 487                 pinctrl-0 = <&fimc_is_i2c1>;
 488                 pinctrl-names = "default";
 489
 490                 s5k6a3@10 {
 491                         compatible = "samsung,s5k6a3";
 492                         reg = <0x10>;
 493                         svdda-supply = <&cam_io_reg>;
 494                         svddio-supply = <&ldo19_reg>;
 495                         afvdd-supply = <&ldo19_reg>;
 496                         clock-frequency = <24000000>;
 497                         /* CAM_B_CLKOUT */
 498                         clocks = <&camera 1>;
 499                         clock-names = "extclk";
 500                         samsung,camclk-out = <1>;
 501                         gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 502
 503                         port {
 504                                 is_s5k6a3_ep: endpoint {
 505                                         remote-endpoint = <&csis1_ep>;
 506                                         data-lanes = <1>;
 507                                 };
 508                         };
 509                 };
 510         };
 511 };
 512
 513 &fimc_lite_0 {
 514         status = "okay";
 515 };
 516
 517 &fimc_lite_1 {
 518         status = "okay";
 519 };
 520
 521 &fimd {
 522         status = "okay";
 523 };
 524
 525 &hsotg {
 526         vusb_d-supply = <&ldo15_reg>;
 527         vusb_a-supply = <&ldo12_reg>;
 528         dr_mode = "peripheral";
 529         status = "okay";
 530 };
 531
 532 &i2c_0 {
 533         samsung,i2c-sda-delay = <100>;
 534         samsung,i2c-slave-addr = <0x10>;
 535         samsung,i2c-max-bus-freq = <400000>;
 536         pinctrl-0 = <&i2c0_bus>;
 537         pinctrl-names = "default";
 538         status = "okay";
 539
 540         s5c73m3@3c {
 541                 compatible = "samsung,s5c73m3";
 542                 reg = <0x3c>;
 543                 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
 544                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 545                 vdd-int-supply = <&buck9_reg>;
 546                 vddio-cis-supply = <&ldo9_reg>;
 547                 vdda-supply = <&ldo17_reg>;
 548                 vddio-host-supply = <&ldo18_reg>;
 549                 vdd-af-supply = <&cam_af_reg>;
 550                 vdd-reg-supply = <&cam_io_reg>;
 551                 clock-frequency = <24000000>;
 552                 /* CAM_A_CLKOUT */
 553                 clocks = <&camera 0>;
 554                 clock-names = "cis_extclk";
 555                 port {
 556                         s5c73m3_ep: endpoint {
 557                                 remote-endpoint = <&csis0_ep>;
 558                                 data-lanes = <1 2 3 4>;
 559                         };
 560                 };
 561         };
 562 };
 563
 564 &i2c_3 {
 565         samsung,i2c-sda-delay = <100>;
 566         samsung,i2c-slave-addr = <0x10>;
 567         samsung,i2c-max-bus-freq = <400000>;
 568         pinctrl-0 = <&i2c3_bus>;
 569         pinctrl-names = "default";
 570         status = "okay";
 571
 572         mms114-touchscreen@48 {
 573                 compatible = "melfas,mms114";
 574                 reg = <0x48>;
 575                 interrupt-parent = <&gpm2>;
 576                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 577                 x-size = <720>;
 578                 y-size = <1280>;
 579                 avdd-supply = <&ldo23_reg>;
 580                 vdd-supply = <&ldo24_reg>;
 581         };
 582 };
 583
 584 &i2c_4 {
 585         samsung,i2c-sda-delay = <100>;
 586         samsung,i2c-slave-addr = <0x10>;
 587         samsung,i2c-max-bus-freq = <100000>;
 588         pinctrl-0 = <&i2c4_bus>;
 589         pinctrl-names = "default";
 590         status = "okay";
 591
 592         wm1811: wm1811@1a {
 593                 compatible = "wlf,wm1811";
 594                 reg = <0x1a>;
 595                 clocks = <&pmu_system_controller 0>;
 596                 clock-names = "MCLK1";
 597                 DCVDD-supply = <&ldo3_reg>;
 598                 DBVDD1-supply = <&ldo3_reg>;
 599                 wlf,ldo1ena = <&gpj0 4 0>;
 600         };
 601 };
 602
 603 &i2c_7 {
 604         samsung,i2c-sda-delay = <100>;
 605         samsung,i2c-slave-addr = <0x10>;
 606         samsung,i2c-max-bus-freq = <100000>;
 607         pinctrl-0 = <&i2c7_bus>;
 608         pinctrl-names = "default";
 609         status = "okay";
 610
 611         max77686: max77686_pmic@09 {
 612                 compatible = "maxim,max77686";
 613                 interrupt-parent = <&gpx0>;
 614                 interrupts = <7 IRQ_TYPE_NONE>;
 615                 reg = <0x09>;
 616                 #clock-cells = <1>;
 617
 618                 voltage-regulators {
 619                         ldo1_reg: LDO1 {
 620                                 regulator-name = "VALIVE_1.0V_AP";
 621                                 regulator-min-microvolt = <1000000>;
 622                                 regulator-max-microvolt = <1000000>;
 623                                 regulator-always-on;
 624                         };
 625
 626                         ldo2_reg: LDO2 {
 627                                 regulator-name = "VM1M2_1.2V_AP";
 628                                 regulator-min-microvolt = <1200000>;
 629                                 regulator-max-microvolt = <1200000>;
 630                                 regulator-always-on;
 631                                 regulator-state-mem {
 632                                         regulator-on-in-suspend;
 633                                 };
 634                         };
 635
 636                         ldo3_reg: LDO3 {
 637                                 regulator-name = "VCC_1.8V_AP";
 638                                 regulator-min-microvolt = <1800000>;
 639                                 regulator-max-microvolt = <1800000>;
 640                                 regulator-always-on;
 641                         };
 642
 643                         ldo4_reg: LDO4 {
 644                                 regulator-name = "VCC_2.8V_AP";
 645                                 regulator-min-microvolt = <2800000>;
 646                                 regulator-max-microvolt = <2800000>;
 647                                 regulator-always-on;
 648                         };
 649
 650                         ldo5_reg: LDO5 {
 651                                 regulator-name = "VCC_1.8V_IO";
 652                                 regulator-min-microvolt = <1800000>;
 653                                 regulator-max-microvolt = <1800000>;
 654                                 regulator-always-on;
 655                         };
 656
 657                         ldo6_reg: LDO6 {
 658                                 regulator-name = "VMPLL_1.0V_AP";
 659                                 regulator-min-microvolt = <1000000>;
 660                                 regulator-max-microvolt = <1000000>;
 661                                 regulator-always-on;
 662                                 regulator-state-mem {
 663                                         regulator-on-in-suspend;
 664                                 };
 665                         };
 666
 667                         ldo7_reg: LDO7 {
 668                                 regulator-name = "VPLL_1.0V_AP";
 669                                 regulator-min-microvolt = <1000000>;
 670                                 regulator-max-microvolt = <1000000>;
 671                                 regulator-always-on;
 672                                 regulator-state-mem {
 673                                         regulator-on-in-suspend;
 674                                 };
 675                         };
 676
 677                         ldo8_reg: LDO8 {
 678                                 regulator-name = "VMIPI_1.0V";
 679                                 regulator-min-microvolt = <1000000>;
 680                                 regulator-max-microvolt = <1000000>;
 681                                 regulator-state-mem {
 682                                         regulator-off-in-suspend;
 683                                 };
 684                         };
 685
 686                         ldo9_reg: LDO9 {
 687                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 688                                 regulator-min-microvolt = <1200000>;
 689                                 regulator-max-microvolt = <1200000>;
 690                         };
 691
 692                         ldo10_reg: LDO10 {
 693                                 regulator-name = "VMIPI_1.8V";
 694                                 regulator-min-microvolt = <1800000>;
 695                                 regulator-max-microvolt = <1800000>;
 696                                 regulator-state-mem {
 697                                         regulator-off-in-suspend;
 698                                 };
 699                         };
 700
 701                         ldo11_reg: LDO11 {
 702                                 regulator-name = "VABB1_1.95V";
 703                                 regulator-min-microvolt = <1950000>;
 704                                 regulator-max-microvolt = <1950000>;
 705                                 regulator-always-on;
 706                                 regulator-state-mem {
 707                                         regulator-off-in-suspend;
 708                                 };
 709                         };
 710
 711                         ldo12_reg: LDO12 {
 712                                 regulator-name = "VUOTG_3.0V";
 713                                 regulator-min-microvolt = <3000000>;
 714                                 regulator-max-microvolt = <3000000>;
 715                                 regulator-state-mem {
 716                                         regulator-off-in-suspend;
 717                                 };
 718                         };
 719
 720                         ldo13_reg: LDO13 {
 721                                 regulator-name = "NFC_AVDD_1.8V";
 722                                 regulator-min-microvolt = <1800000>;
 723                                 regulator-max-microvolt = <1800000>;
 724                         };
 725
 726                         ldo14_reg: LDO14 {
 727                                 regulator-name = "VABB2_1.95V";
 728                                 regulator-min-microvolt = <1950000>;
 729                                 regulator-max-microvolt = <1950000>;
 730                                 regulator-always-on;
 731                                 regulator-state-mem {
 732                                         regulator-off-in-suspend;
 733                                 };
 734                         };
 735
 736                         ldo15_reg: LDO15 {
 737                                 regulator-name = "VHSIC_1.0V";
 738                                 regulator-min-microvolt = <1000000>;
 739                                 regulator-max-microvolt = <1000000>;
 740                                 regulator-state-mem {
 741                                         regulator-on-in-suspend;
 742                                 };
 743                         };
 744
 745                         ldo16_reg: LDO16 {
 746                                 regulator-name = "VHSIC_1.8V";
 747                                 regulator-min-microvolt = <1800000>;
 748                                 regulator-max-microvolt = <1800000>;
 749                                 regulator-state-mem {
 750                                         regulator-on-in-suspend;
 751                                 };
 752                         };
 753
 754                         ldo17_reg: LDO17 {
 755                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 756                                 regulator-min-microvolt = <1200000>;
 757                                 regulator-max-microvolt = <1200000>;
 758                         };
 759
 760                         ldo18_reg: LDO18 {
 761                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 762                                 regulator-min-microvolt = <1800000>;
 763                                 regulator-max-microvolt = <1800000>;
 764                         };
 765
 766                         ldo19_reg: LDO19 {
 767                                 regulator-name = "VT_CAM_1.8V";
 768                                 regulator-min-microvolt = <1800000>;
 769                                 regulator-max-microvolt = <1800000>;
 770                         };
 771
 772                         ldo20_reg: LDO20 {
 773                                 regulator-name = "VDDQ_PRE_1.8V";
 774                                 regulator-min-microvolt = <1800000>;
 775                                 regulator-max-microvolt = <1800000>;
 776                         };
 777
 778                         ldo21_reg: LDO21 {
 779                                 regulator-name = "VTF_2.8V";
 780                                 regulator-min-microvolt = <2800000>;
 781                                 regulator-max-microvolt = <2800000>;
 782                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 783                         };
 784
 785                         ldo22_reg: LDO22 {
 786                                 regulator-name = "VMEM_VDD_2.8V";
 787                                 regulator-min-microvolt = <2800000>;
 788                                 regulator-max-microvolt = <2800000>;
 789                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 790                         };
 791
 792                         ldo23_reg: LDO23 {
 793                                 regulator-name = "TSP_AVDD_3.3V";
 794                                 regulator-min-microvolt = <3300000>;
 795                                 regulator-max-microvolt = <3300000>;
 796                         };
 797
 798                         ldo24_reg: LDO24 {
 799                                 regulator-name = "TSP_VDD_1.8V";
 800                                 regulator-min-microvolt = <1800000>;
 801                                 regulator-max-microvolt = <1800000>;
 802                         };
 803
 804                         ldo25_reg: LDO25 {
 805                                 regulator-name = "LCD_VCC_3.3V";
 806                                 regulator-min-microvolt = <2800000>;
 807                                 regulator-max-microvolt = <2800000>;
 808                         };
 809
 810                         ldo26_reg: LDO26 {
 811                                 regulator-name = "MOTOR_VCC_3.0V";
 812                                 regulator-min-microvolt = <3000000>;
 813                                 regulator-max-microvolt = <3000000>;
 814                         };
 815
 816                         buck1_reg: BUCK1 {
 817                                 regulator-name = "vdd_mif";
 818                                 regulator-min-microvolt = <850000>;
 819                                 regulator-max-microvolt = <1100000>;
 820                                 regulator-always-on;
 821                                 regulator-boot-on;
 822                                 regulator-state-mem {
 823                                         regulator-off-in-suspend;
 824                                 };
 825                         };
 826
 827                         buck2_reg: BUCK2 {
 828                                 regulator-name = "vdd_arm";
 829                                 regulator-min-microvolt = <850000>;
 830                                 regulator-max-microvolt = <1500000>;
 831                                 regulator-always-on;
 832                                 regulator-boot-on;
 833                                 regulator-state-mem {
 834                                         regulator-on-in-suspend;
 835                                 };
 836                         };
 837
 838                         buck3_reg: BUCK3 {
 839                                 regulator-name = "vdd_int";
 840                                 regulator-min-microvolt = <850000>;
 841                                 regulator-max-microvolt = <1150000>;
 842                                 regulator-always-on;
 843                                 regulator-boot-on;
 844                                 regulator-state-mem {
 845                                         regulator-off-in-suspend;
 846                                 };
 847                         };
 848
 849                         buck4_reg: BUCK4 {
 850                                 regulator-name = "vdd_g3d";
 851                                 regulator-min-microvolt = <850000>;
 852                                 regulator-max-microvolt = <1150000>;
 853                                 regulator-boot-on;
 854                                 regulator-state-mem {
 855                                         regulator-off-in-suspend;
 856                                 };
 857                         };
 858
 859                         buck5_reg: BUCK5 {
 860                                 regulator-name = "VMEM_1.2V_AP";
 861                                 regulator-min-microvolt = <1200000>;
 862                                 regulator-max-microvolt = <1200000>;
 863                                 regulator-always-on;
 864                         };
 865
 866                         buck6_reg: BUCK6 {
 867                                 regulator-name = "VCC_SUB_1.35V";
 868                                 regulator-min-microvolt = <1350000>;
 869                                 regulator-max-microvolt = <1350000>;
 870                                 regulator-always-on;
 871                         };
 872
 873                         buck7_reg: BUCK7 {
 874                                 regulator-name = "VCC_SUB_2.0V";
 875                                 regulator-min-microvolt = <2000000>;
 876                                 regulator-max-microvolt = <2000000>;
 877                                 regulator-always-on;
 878                         };
 879
 880                         buck8_reg: BUCK8 {
 881                                 regulator-name = "VMEM_VDDF_3.0V";
 882                                 regulator-min-microvolt = <2850000>;
 883                                 regulator-max-microvolt = <2850000>;
 884                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 885                         };
 886
 887                         buck9_reg: BUCK9 {
 888                                 regulator-name = "CAM_ISP_CORE_1.2V";
 889                                 regulator-min-microvolt = <1000000>;
 890                                 regulator-max-microvolt = <1200000>;
 891                                 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
 892                         };
 893                 };
 894         };
 895 };
 896
 897 &i2s0 {
 898         pinctrl-0 = <&i2s0_bus>;
 899         pinctrl-names = "default";
 900         status = "okay";
 901 };
 902
 903 &mshc_0 {
 904         num-slots = <1>;
 905         broken-cd;
 906         non-removable;
 907         card-detect-delay = <200>;
 908         vmmc-supply = <&ldo22_reg>;
 909         clock-frequency = <400000000>;
 910         samsung,dw-mshc-ciu-div = <0>;
 911         samsung,dw-mshc-sdr-timing = <2 3>;
 912         samsung,dw-mshc-ddr-timing = <1 2>;
 913         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 914         pinctrl-names = "default";
 915         status = "okay";
 916         bus-width = <8>;
 917         cap-mmc-highspeed;
 918 };
 919
 920 &pmu_system_controller {
 921         assigned-clocks = <&pmu_system_controller 0>;
 922         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 923 };
 924
 925 &pinctrl_0 {
 926         pinctrl-names = "default";
 927         pinctrl-0 = <&sleep0>;
 928
 929         sleep0: sleep-states {
 930                 PIN_SLP(gpa0-0, INPUT, NONE);
 931                 PIN_SLP(gpa0-1, OUT0, NONE);
 932                 PIN_SLP(gpa0-2, INPUT, NONE);
 933                 PIN_SLP(gpa0-3, INPUT, UP);
 934                 PIN_SLP(gpa0-4, INPUT, NONE);
 935                 PIN_SLP(gpa0-5, INPUT, DOWN);
 936                 PIN_SLP(gpa0-6, INPUT, DOWN);
 937                 PIN_SLP(gpa0-7, INPUT, UP);
 938
 939                 PIN_SLP(gpa1-0, INPUT, DOWN);
 940                 PIN_SLP(gpa1-1, INPUT, DOWN);
 941                 PIN_SLP(gpa1-2, INPUT, DOWN);
 942                 PIN_SLP(gpa1-3, INPUT, DOWN);
 943                 PIN_SLP(gpa1-4, INPUT, DOWN);
 944                 PIN_SLP(gpa1-5, INPUT, DOWN);
 945
 946                 PIN_SLP(gpb-0, INPUT, NONE);
 947                 PIN_SLP(gpb-1, INPUT, NONE);
 948                 PIN_SLP(gpb-2, INPUT, NONE);
 949                 PIN_SLP(gpb-3, INPUT, NONE);
 950                 PIN_SLP(gpb-4, INPUT, DOWN);
 951                 PIN_SLP(gpb-5, INPUT, UP);
 952                 PIN_SLP(gpb-6, INPUT, DOWN);
 953                 PIN_SLP(gpb-7, INPUT, DOWN);
 954
 955                 PIN_SLP(gpc0-0, INPUT, DOWN);
 956                 PIN_SLP(gpc0-1, INPUT, DOWN);
 957                 PIN_SLP(gpc0-2, INPUT, DOWN);
 958                 PIN_SLP(gpc0-3, INPUT, DOWN);
 959                 PIN_SLP(gpc0-4, INPUT, DOWN);
 960
 961                 PIN_SLP(gpc1-0, INPUT, NONE);
 962                 PIN_SLP(gpc1-1, PREV, NONE);
 963                 PIN_SLP(gpc1-2, INPUT, NONE);
 964                 PIN_SLP(gpc1-3, INPUT, NONE);
 965                 PIN_SLP(gpc1-4, INPUT, NONE);
 966
 967                 PIN_SLP(gpd0-0, INPUT, DOWN);
 968                 PIN_SLP(gpd0-1, INPUT, DOWN);
 969                 PIN_SLP(gpd0-2, INPUT, NONE);
 970                 PIN_SLP(gpd0-3, INPUT, NONE);
 971
 972                 PIN_SLP(gpd1-0, INPUT, DOWN);
 973                 PIN_SLP(gpd1-1, INPUT, DOWN);
 974                 PIN_SLP(gpd1-2, INPUT, NONE);
 975                 PIN_SLP(gpd1-3, INPUT, NONE);
 976
 977                 PIN_SLP(gpf0-0, INPUT, NONE);
 978                 PIN_SLP(gpf0-1, INPUT, NONE);
 979                 PIN_SLP(gpf0-2, INPUT, DOWN);
 980                 PIN_SLP(gpf0-3, INPUT, DOWN);
 981                 PIN_SLP(gpf0-4, INPUT, NONE);
 982                 PIN_SLP(gpf0-5, INPUT, DOWN);
 983                 PIN_SLP(gpf0-6, INPUT, NONE);
 984                 PIN_SLP(gpf0-7, INPUT, DOWN);
 985
 986                 PIN_SLP(gpf1-0, INPUT, DOWN);
 987                 PIN_SLP(gpf1-1, INPUT, DOWN);
 988                 PIN_SLP(gpf1-2, INPUT, DOWN);
 989                 PIN_SLP(gpf1-3, INPUT, DOWN);
 990                 PIN_SLP(gpf1-4, INPUT, NONE);
 991                 PIN_SLP(gpf1-5, INPUT, NONE);
 992                 PIN_SLP(gpf1-6, INPUT, DOWN);
 993                 PIN_SLP(gpf1-7, PREV, NONE);
 994
 995                 PIN_SLP(gpf2-0, PREV, NONE);
 996                 PIN_SLP(gpf2-1, INPUT, DOWN);
 997                 PIN_SLP(gpf2-2, INPUT, DOWN);
 998                 PIN_SLP(gpf2-3, INPUT, DOWN);
 999                 PIN_SLP(gpf2-4, INPUT, DOWN);
1000                 PIN_SLP(gpf2-5, INPUT, DOWN);
1001                 PIN_SLP(gpf2-6, INPUT, NONE);
1002                 PIN_SLP(gpf2-7, INPUT, NONE);
1003
1004                 PIN_SLP(gpf3-0, INPUT, NONE);
1005                 PIN_SLP(gpf3-1, PREV, NONE);
1006                 PIN_SLP(gpf3-2, PREV, NONE);
1007                 PIN_SLP(gpf3-3, PREV, NONE);
1008                 PIN_SLP(gpf3-4, OUT1, NONE);
1009                 PIN_SLP(gpf3-5, INPUT, DOWN);
1010
1011                 PIN_SLP(gpj0-0, PREV, NONE);
1012                 PIN_SLP(gpj0-1, PREV, NONE);
1013                 PIN_SLP(gpj0-2, PREV, NONE);
1014                 PIN_SLP(gpj0-3, INPUT, DOWN);
1015                 PIN_SLP(gpj0-4, PREV, NONE);
1016                 PIN_SLP(gpj0-5, PREV, NONE);
1017                 PIN_SLP(gpj0-6, INPUT, DOWN);
1018                 PIN_SLP(gpj0-7, INPUT, DOWN);
1019
1020                 PIN_SLP(gpj1-0, INPUT, DOWN);
1021                 PIN_SLP(gpj1-1, PREV, NONE);
1022                 PIN_SLP(gpj1-2, PREV, NONE);
1023                 PIN_SLP(gpj1-3, INPUT, DOWN);
1024                 PIN_SLP(gpj1-4, INPUT, DOWN);
1025         };
1026 };
1027
1028 &pinctrl_1 {
1029         pinctrl-names = "default";
1030         pinctrl-0 = <&sleep1>;
1031
1032         sleep1: sleep-states {
1033                 PIN_SLP(gpk0-0, PREV, NONE);
1034                 PIN_SLP(gpk0-1, PREV, NONE);
1035                 PIN_SLP(gpk0-2, OUT0, NONE);
1036                 PIN_SLP(gpk0-3, PREV, NONE);
1037                 PIN_SLP(gpk0-4, PREV, NONE);
1038                 PIN_SLP(gpk0-5, PREV, NONE);
1039                 PIN_SLP(gpk0-6, PREV, NONE);
1040
1041                 PIN_SLP(gpk1-0, INPUT, DOWN);
1042                 PIN_SLP(gpk1-1, INPUT, DOWN);
1043                 PIN_SLP(gpk1-2, INPUT, DOWN);
1044                 PIN_SLP(gpk1-3, PREV, NONE);
1045                 PIN_SLP(gpk1-4, PREV, NONE);
1046                 PIN_SLP(gpk1-5, PREV, NONE);
1047                 PIN_SLP(gpk1-6, PREV, NONE);
1048
1049                 PIN_SLP(gpk2-0, INPUT, DOWN);
1050                 PIN_SLP(gpk2-1, INPUT, DOWN);
1051                 PIN_SLP(gpk2-2, INPUT, DOWN);
1052                 PIN_SLP(gpk2-3, INPUT, DOWN);
1053                 PIN_SLP(gpk2-4, INPUT, DOWN);
1054                 PIN_SLP(gpk2-5, INPUT, DOWN);
1055                 PIN_SLP(gpk2-6, INPUT, DOWN);
1056
1057                 PIN_SLP(gpk3-0, OUT0, NONE);
1058                 PIN_SLP(gpk3-1, INPUT, NONE);
1059                 PIN_SLP(gpk3-2, INPUT, DOWN);
1060                 PIN_SLP(gpk3-3, INPUT, NONE);
1061                 PIN_SLP(gpk3-4, INPUT, NONE);
1062                 PIN_SLP(gpk3-5, INPUT, NONE);
1063                 PIN_SLP(gpk3-6, INPUT, NONE);
1064
1065                 PIN_SLP(gpl0-0, INPUT, DOWN);
1066                 PIN_SLP(gpl0-1, INPUT, DOWN);
1067                 PIN_SLP(gpl0-2, INPUT, DOWN);
1068                 PIN_SLP(gpl0-3, INPUT, DOWN);
1069                 PIN_SLP(gpl0-4, PREV, NONE);
1070                 PIN_SLP(gpl0-6, PREV, NONE);
1071
1072                 PIN_SLP(gpl1-0, INPUT, DOWN);
1073                 PIN_SLP(gpl1-1, INPUT, DOWN);
1074                 PIN_SLP(gpl2-0, INPUT, DOWN);
1075                 PIN_SLP(gpl2-1, INPUT, DOWN);
1076                 PIN_SLP(gpl2-2, INPUT, DOWN);
1077                 PIN_SLP(gpl2-3, INPUT, DOWN);
1078                 PIN_SLP(gpl2-4, INPUT, DOWN);
1079                 PIN_SLP(gpl2-5, INPUT, DOWN);
1080                 PIN_SLP(gpl2-6, PREV, NONE);
1081                 PIN_SLP(gpl2-7, INPUT, DOWN);
1082
1083                 PIN_SLP(gpm0-0, INPUT, DOWN);
1084                 PIN_SLP(gpm0-1, INPUT, DOWN);
1085                 PIN_SLP(gpm0-2, INPUT, DOWN);
1086                 PIN_SLP(gpm0-3, INPUT, DOWN);
1087                 PIN_SLP(gpm0-4, INPUT, DOWN);
1088                 PIN_SLP(gpm0-5, INPUT, DOWN);
1089                 PIN_SLP(gpm0-6, INPUT, DOWN);
1090                 PIN_SLP(gpm0-7, INPUT, DOWN);
1091
1092                 PIN_SLP(gpm1-0, INPUT, DOWN);
1093                 PIN_SLP(gpm1-1, INPUT, DOWN);
1094                 PIN_SLP(gpm1-2, INPUT, NONE);
1095                 PIN_SLP(gpm1-3, INPUT, NONE);
1096                 PIN_SLP(gpm1-4, INPUT, NONE);
1097                 PIN_SLP(gpm1-5, INPUT, NONE);
1098                 PIN_SLP(gpm1-6, INPUT, DOWN);
1099
1100                 PIN_SLP(gpm2-0, INPUT, NONE);
1101                 PIN_SLP(gpm2-1, INPUT, NONE);
1102                 PIN_SLP(gpm2-2, INPUT, DOWN);
1103                 PIN_SLP(gpm2-3, INPUT, DOWN);
1104                 PIN_SLP(gpm2-4, INPUT, DOWN);
1105
1106                 PIN_SLP(gpm3-0, PREV, NONE);
1107                 PIN_SLP(gpm3-1, PREV, NONE);
1108                 PIN_SLP(gpm3-2, PREV, NONE);
1109                 PIN_SLP(gpm3-3, OUT1, NONE);
1110                 PIN_SLP(gpm3-4, INPUT, DOWN);
1111                 PIN_SLP(gpm3-5, INPUT, DOWN);
1112                 PIN_SLP(gpm3-6, INPUT, DOWN);
1113                 PIN_SLP(gpm3-7, INPUT, DOWN);
1114
1115                 PIN_SLP(gpm4-0, INPUT, DOWN);
1116                 PIN_SLP(gpm4-1, INPUT, DOWN);
1117                 PIN_SLP(gpm4-2, INPUT, DOWN);
1118                 PIN_SLP(gpm4-3, INPUT, DOWN);
1119                 PIN_SLP(gpm4-4, INPUT, DOWN);
1120                 PIN_SLP(gpm4-5, INPUT, DOWN);
1121                 PIN_SLP(gpm4-6, INPUT, DOWN);
1122                 PIN_SLP(gpm4-7, INPUT, DOWN);
1123
1124                 PIN_SLP(gpy0-0, INPUT, DOWN);
1125                 PIN_SLP(gpy0-1, INPUT, DOWN);
1126                 PIN_SLP(gpy0-2, INPUT, DOWN);
1127                 PIN_SLP(gpy0-3, INPUT, DOWN);
1128                 PIN_SLP(gpy0-4, INPUT, DOWN);
1129                 PIN_SLP(gpy0-5, INPUT, DOWN);
1130
1131                 PIN_SLP(gpy1-0, INPUT, DOWN);
1132                 PIN_SLP(gpy1-1, INPUT, DOWN);
1133                 PIN_SLP(gpy1-2, INPUT, DOWN);
1134                 PIN_SLP(gpy1-3, INPUT, DOWN);
1135
1136                 PIN_SLP(gpy2-0, PREV, NONE);
1137                 PIN_SLP(gpy2-1, INPUT, DOWN);
1138                 PIN_SLP(gpy2-2, INPUT, NONE);
1139                 PIN_SLP(gpy2-3, INPUT, NONE);
1140                 PIN_SLP(gpy2-4, INPUT, NONE);
1141                 PIN_SLP(gpy2-5, INPUT, NONE);
1142
1143                 PIN_SLP(gpy3-0, INPUT, DOWN);
1144                 PIN_SLP(gpy3-1, INPUT, DOWN);
1145                 PIN_SLP(gpy3-2, INPUT, DOWN);
1146                 PIN_SLP(gpy3-3, INPUT, DOWN);
1147                 PIN_SLP(gpy3-4, INPUT, DOWN);
1148                 PIN_SLP(gpy3-5, INPUT, DOWN);
1149                 PIN_SLP(gpy3-6, INPUT, DOWN);
1150                 PIN_SLP(gpy3-7, INPUT, DOWN);
1151
1152                 PIN_SLP(gpy4-0, INPUT, DOWN);
1153                 PIN_SLP(gpy4-1, INPUT, DOWN);
1154                 PIN_SLP(gpy4-2, INPUT, DOWN);
1155                 PIN_SLP(gpy4-3, INPUT, DOWN);
1156                 PIN_SLP(gpy4-4, INPUT, DOWN);
1157                 PIN_SLP(gpy4-5, INPUT, DOWN);
1158                 PIN_SLP(gpy4-6, INPUT, DOWN);
1159                 PIN_SLP(gpy4-7, INPUT, DOWN);
1160
1161                 PIN_SLP(gpy5-0, INPUT, DOWN);
1162                 PIN_SLP(gpy5-1, INPUT, DOWN);
1163                 PIN_SLP(gpy5-2, INPUT, DOWN);
1164                 PIN_SLP(gpy5-3, INPUT, DOWN);
1165                 PIN_SLP(gpy5-4, INPUT, DOWN);
1166                 PIN_SLP(gpy5-5, INPUT, DOWN);
1167                 PIN_SLP(gpy5-6, INPUT, DOWN);
1168                 PIN_SLP(gpy5-7, INPUT, DOWN);
1169
1170                 PIN_SLP(gpy6-0, INPUT, DOWN);
1171                 PIN_SLP(gpy6-1, INPUT, DOWN);
1172                 PIN_SLP(gpy6-2, INPUT, DOWN);
1173                 PIN_SLP(gpy6-3, INPUT, DOWN);
1174                 PIN_SLP(gpy6-4, INPUT, DOWN);
1175                 PIN_SLP(gpy6-5, INPUT, DOWN);
1176                 PIN_SLP(gpy6-6, INPUT, DOWN);
1177                 PIN_SLP(gpy6-7, INPUT, DOWN);
1178         };
1179 };
1180
1181 &pinctrl_2 {
1182         pinctrl-names = "default";
1183         pinctrl-0 = <&sleep2>;
1184
1185         sleep2: sleep-states {
1186                 PIN_SLP(gpz-0, INPUT, DOWN);
1187                 PIN_SLP(gpz-1, INPUT, DOWN);
1188                 PIN_SLP(gpz-2, INPUT, DOWN);
1189                 PIN_SLP(gpz-3, INPUT, DOWN);
1190                 PIN_SLP(gpz-4, INPUT, DOWN);
1191                 PIN_SLP(gpz-5, INPUT, DOWN);
1192                 PIN_SLP(gpz-6, INPUT, DOWN);
1193         };
1194 };
1195
1196 &pinctrl_3 {
1197         pinctrl-names = "default";
1198         pinctrl-0 = <&sleep3>;
1199
1200         sleep3: sleep-states {
1201                 PIN_SLP(gpv0-0, INPUT, DOWN);
1202                 PIN_SLP(gpv0-1, INPUT, DOWN);
1203                 PIN_SLP(gpv0-2, INPUT, DOWN);
1204                 PIN_SLP(gpv0-3, INPUT, DOWN);
1205                 PIN_SLP(gpv0-4, INPUT, DOWN);
1206                 PIN_SLP(gpv0-5, INPUT, DOWN);
1207                 PIN_SLP(gpv0-6, INPUT, DOWN);
1208                 PIN_SLP(gpv0-7, INPUT, DOWN);
1209
1210                 PIN_SLP(gpv1-0, INPUT, DOWN);
1211                 PIN_SLP(gpv1-1, INPUT, DOWN);
1212                 PIN_SLP(gpv1-2, INPUT, DOWN);
1213                 PIN_SLP(gpv1-3, INPUT, DOWN);
1214                 PIN_SLP(gpv1-4, INPUT, DOWN);
1215                 PIN_SLP(gpv1-5, INPUT, DOWN);
1216                 PIN_SLP(gpv1-6, INPUT, DOWN);
1217                 PIN_SLP(gpv1-7, INPUT, DOWN);
1218
1219                 PIN_SLP(gpv2-0, INPUT, DOWN);
1220                 PIN_SLP(gpv2-1, INPUT, DOWN);
1221                 PIN_SLP(gpv2-2, INPUT, DOWN);
1222                 PIN_SLP(gpv2-3, INPUT, DOWN);
1223                 PIN_SLP(gpv2-4, INPUT, DOWN);
1224                 PIN_SLP(gpv2-5, INPUT, DOWN);
1225                 PIN_SLP(gpv2-6, INPUT, DOWN);
1226                 PIN_SLP(gpv2-7, INPUT, DOWN);
1227
1228                 PIN_SLP(gpv3-0, INPUT, DOWN);
1229                 PIN_SLP(gpv3-1, INPUT, DOWN);
1230                 PIN_SLP(gpv3-2, INPUT, DOWN);
1231                 PIN_SLP(gpv3-3, INPUT, DOWN);
1232                 PIN_SLP(gpv3-4, INPUT, DOWN);
1233                 PIN_SLP(gpv3-5, INPUT, DOWN);
1234                 PIN_SLP(gpv3-6, INPUT, DOWN);
1235                 PIN_SLP(gpv3-7, INPUT, DOWN);
1236
1237                 PIN_SLP(gpv4-0, INPUT, DOWN);
1238         };
1239 };
1240
1241 &pwm {
1242         pinctrl-0 = <&pwm0_out>;
1243         pinctrl-names = "default";
1244         samsung,pwm-outputs = <0>;
1245         status = "okay";
1246 };
1247
1248 &rtc {
1249         status = "okay";
1250         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1251         clock-names = "rtc", "rtc_src";
1252 };
1253
1254 &sdhci_2 {
1255         bus-width = <4>;
1256         cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1257         cd-inverted;
1258         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1259         pinctrl-names = "default";
1260         vmmc-supply = <&ldo21_reg>;
1261         status = "okay";
1262 };
1263
1264 &serial_0 {
1265         status = "okay";
1266 };
1267
1268 &serial_1 {
1269         status = "okay";
1270 };
1271
1272 &serial_2 {
1273         status = "okay";
1274 };
1275
1276 &serial_3 {
1277         status = "okay";
1278 };
1279
1280 &spi_1 {
1281         pinctrl-names = "default";
1282         pinctrl-0 = <&spi1_bus>;
1283         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1284         status = "okay";
1285
1286         s5c73m3_spi: s5c73m3@0 {
1287                 compatible = "samsung,s5c73m3";
1288                 spi-max-frequency = <50000000>;
1289                 reg = <0>;
1290                 controller-data {
1291                         samsung,spi-feedback-delay = <2>;
1292                 };
1293         };
1294 };
1295
1296 &tmu {
1297         vtmu-supply = <&ldo10_reg>;
1298         status = "okay";
1299 };