arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 led0 = &led0;
  18                 led1 = &led1;
  19                 led2 = &led2;
  20                 nand = &gpmi;
  21                 ssi0 = &ssi1;
  22                 usb0 = &usbh1;
  23                 usb1 = &usbotg;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttymxc1,115200";
  28         };
  29
  30         backlight {
  31                 compatible = "pwm-backlight";
  32                 pwms = <&pwm4 0 5000000>;
  33                 brightness-levels = <0 4 8 16 32 64 128 255>;
  34                 default-brightness-level = <7>;
  35         };
  36
  37         leds {
  38                 compatible = "gpio-leds";
  39                 pinctrl-names = "default";
  40                 pinctrl-0 = <&pinctrl_gpio_leds>;
  41
  42                 led0: user1 {
  43                         label = "user1";
  44                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  45                         default-state = "on";
  46                         linux,default-trigger = "heartbeat";
  47                 };
  48
  49                 led1: user2 {
  50                         label = "user2";
  51                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  52                         default-state = "off";
  53                 };
  54
  55                 led2: user3 {
  56                         label = "user3";
  57                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  58                         default-state = "off";
  59                 };
  60         };
  61
  62         memory {
  63                 reg = <0x10000000 0x40000000>;
  64         };
  65
  66         pps {
  67                 compatible = "pps-gpio";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&pinctrl_pps>;
  70                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  71                 status = "okay";
  72         };
  73
  74         regulators {
  75                 compatible = "simple-bus";
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78
  79                 reg_1p0v: regulator@0 {
  80                         compatible = "regulator-fixed";
  81                         reg = <0>;
  82                         regulator-name = "1P0V";
  83                         regulator-min-microvolt = <1000000>;
  84                         regulator-max-microvolt = <1000000>;
  85                         regulator-always-on;
  86                 };
  87
  88                 reg_3p3v: regulator@1 {
  89                         compatible = "regulator-fixed";
  90                         reg = <1>;
  91                         regulator-name = "3P3V";
  92                         regulator-min-microvolt = <3300000>;
  93                         regulator-max-microvolt = <3300000>;
  94                         regulator-always-on;
  95                 };
  96
  97                 reg_usb_h1_vbus: regulator@2 {
  98                         compatible = "regulator-fixed";
  99                         reg = <2>;
 100                         regulator-name = "usb_h1_vbus";
 101                         regulator-min-microvolt = <5000000>;
 102                         regulator-max-microvolt = <5000000>;
 103                         regulator-always-on;
 104                 };
 105
 106                 reg_usb_otg_vbus: regulator@3 {
 107                         compatible = "regulator-fixed";
 108                         reg = <3>;
 109                         regulator-name = "usb_otg_vbus";
 110                         regulator-min-microvolt = <5000000>;
 111                         regulator-max-microvolt = <5000000>;
 112                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 113                         enable-active-high;
 114                 };
 115         };
 116
 117         sound {
 118                 compatible = "fsl,imx6q-ventana-sgtl5000",
 119                              "fsl,imx-audio-sgtl5000";
 120                 model = "sgtl5000-audio";
 121                 ssi-controller = <&ssi1>;
 122                 audio-codec = <&codec>;
 123                 audio-routing =
 124                         "MIC_IN", "Mic Jack",
 125                         "Mic Jack", "Mic Bias",
 126                         "Headphone Jack", "HP_OUT";
 127                 mux-int-port = <1>;
 128                 mux-ext-port = <4>;
 129         };
 130 };
 131
 132 &audmux {
 133         pinctrl-names = "default";
 134         pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 135         status = "okay";
 136 };
 137
 138 &can1 {
 139         pinctrl-names = "default";
 140         pinctrl-0 = <&pinctrl_flexcan1>;
 141         status = "okay";
 142 };
 143
 144 &clks {
 145         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 146                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 147         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 148                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 149 };
 150
 151 &ecspi2 {
 152         cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_ecspi2>;
 155         status = "okay";
 156 };
 157
 158 &fec {
 159         pinctrl-names = "default";
 160         pinctrl-0 = <&pinctrl_enet>;
 161         phy-mode = "rgmii-id";
 162         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 163         status = "okay";
 164 };
 165
 166 &gpmi {
 167         pinctrl-names = "default";
 168         pinctrl-0 = <&pinctrl_gpmi_nand>;
 169         status = "okay";
 170 };
 171
 172 &hdmi {
 173         ddc-i2c-bus = <&i2c3>;
 174         status = "okay";
 175 };
 176
 177 &i2c1 {
 178         clock-frequency = <100000>;
 179         pinctrl-names = "default";
 180         pinctrl-0 = <&pinctrl_i2c1>;
 181         status = "okay";
 182
 183         eeprom1: eeprom@50 {
 184                 compatible = "atmel,24c02";
 185                 reg = <0x50>;
 186                 pagesize = <16>;
 187         };
 188
 189         eeprom2: eeprom@51 {
 190                 compatible = "atmel,24c02";
 191                 reg = <0x51>;
 192                 pagesize = <16>;
 193         };
 194
 195         eeprom3: eeprom@52 {
 196                 compatible = "atmel,24c02";
 197                 reg = <0x52>;
 198                 pagesize = <16>;
 199         };
 200
 201         eeprom4: eeprom@53 {
 202                 compatible = "atmel,24c02";
 203                 reg = <0x53>;
 204                 pagesize = <16>;
 205         };
 206
 207         gpio: pca9555@23 {
 208                 compatible = "nxp,pca9555";
 209                 reg = <0x23>;
 210                 gpio-controller;
 211                 #gpio-cells = <2>;
 212         };
 213
 214         rtc: ds1672@68 {
 215                 compatible = "dallas,ds1672";
 216                 reg = <0x68>;
 217         };
 218 };
 219
 220 &i2c2 {
 221         clock-frequency = <100000>;
 222         pinctrl-names = "default";
 223         pinctrl-0 = <&pinctrl_i2c2>;
 224         status = "okay";
 225
 226         pmic: pfuze100@08 {
 227                 compatible = "fsl,pfuze100";
 228                 reg = <0x08>;
 229
 230                 regulators {
 231                         sw1a_reg: sw1ab {
 232                                 regulator-min-microvolt = <300000>;
 233                                 regulator-max-microvolt = <1875000>;
 234                                 regulator-boot-on;
 235                                 regulator-always-on;
 236                                 regulator-ramp-delay = <6250>;
 237                         };
 238
 239                         sw1c_reg: sw1c {
 240                                 regulator-min-microvolt = <300000>;
 241                                 regulator-max-microvolt = <1875000>;
 242                                 regulator-boot-on;
 243                                 regulator-always-on;
 244                                 regulator-ramp-delay = <6250>;
 245                         };
 246
 247                         sw2_reg: sw2 {
 248                                 regulator-min-microvolt = <800000>;
 249                                 regulator-max-microvolt = <3950000>;
 250                                 regulator-boot-on;
 251                                 regulator-always-on;
 252                         };
 253
 254                         sw3a_reg: sw3a {
 255                                 regulator-min-microvolt = <400000>;
 256                                 regulator-max-microvolt = <1975000>;
 257                                 regulator-boot-on;
 258                                 regulator-always-on;
 259                         };
 260
 261                         sw3b_reg: sw3b {
 262                                 regulator-min-microvolt = <400000>;
 263                                 regulator-max-microvolt = <1975000>;
 264                                 regulator-boot-on;
 265                                 regulator-always-on;
 266                         };
 267
 268                         sw4_reg: sw4 {
 269                                 regulator-min-microvolt = <800000>;
 270                                 regulator-max-microvolt = <3300000>;
 271                         };
 272
 273                         swbst_reg: swbst {
 274                                 regulator-min-microvolt = <5000000>;
 275                                 regulator-max-microvolt = <5150000>;
 276                                 regulator-boot-on;
 277                                 regulator-always-on;
 278                         };
 279
 280                         snvs_reg: vsnvs {
 281                                 regulator-min-microvolt = <1000000>;
 282                                 regulator-max-microvolt = <3000000>;
 283                                 regulator-boot-on;
 284                                 regulator-always-on;
 285                         };
 286
 287                         vref_reg: vrefddr {
 288                                 regulator-boot-on;
 289                                 regulator-always-on;
 290                         };
 291
 292                         vgen1_reg: vgen1 {
 293                                 regulator-min-microvolt = <800000>;
 294                                 regulator-max-microvolt = <1550000>;
 295                         };
 296
 297                         vgen2_reg: vgen2 {
 298                                 regulator-min-microvolt = <800000>;
 299                                 regulator-max-microvolt = <1550000>;
 300                         };
 301
 302                         vgen3_reg: vgen3 {
 303                                 regulator-min-microvolt = <1800000>;
 304                                 regulator-max-microvolt = <3300000>;
 305                         };
 306
 307                         vgen4_reg: vgen4 {
 308                                 regulator-min-microvolt = <1800000>;
 309                                 regulator-max-microvolt = <3300000>;
 310                                 regulator-always-on;
 311                         };
 312
 313                         vgen5_reg: vgen5 {
 314                                 regulator-min-microvolt = <1800000>;
 315                                 regulator-max-microvolt = <3300000>;
 316                                 regulator-always-on;
 317                         };
 318
 319                         vgen6_reg: vgen6 {
 320                                 regulator-min-microvolt = <1800000>;
 321                                 regulator-max-microvolt = <3300000>;
 322                                 regulator-always-on;
 323                         };
 324                 };
 325         };
 326 };
 327
 328 &i2c3 {
 329         clock-frequency = <100000>;
 330         pinctrl-names = "default";
 331         pinctrl-0 = <&pinctrl_i2c3>;
 332         status = "okay";
 333
 334         codec: sgtl5000@0a {
 335                 compatible = "fsl,sgtl5000";
 336                 reg = <0x0a>;
 337                 clocks = <&clks IMX6QDL_CLK_CKO>;
 338                 VDDA-supply = <&sw4_reg>;
 339                 VDDIO-supply = <&reg_3p3v>;
 340         };
 341
 342         touchscreen: egalax_ts@04 {
 343                 compatible = "eeti,egalax_ts";
 344                 reg = <0x04>;
 345                 interrupt-parent = <&gpio7>;
 346                 interrupts = <12 2>;
 347                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 348         };
 349 };
 350
 351 &ldb {
 352         status = "okay";
 353
 354         lvds-channel@0 {
 355                 fsl,data-mapping = "spwg";
 356                 fsl,data-width = <18>;
 357                 status = "okay";
 358
 359                 display-timings {
 360                         native-mode = <&timing0>;
 361                         timing0: hsd100pxn1 {
 362                                 clock-frequency = <65000000>;
 363                                 hactive = <1024>;
 364                                 vactive = <768>;
 365                                 hback-porch = <220>;
 366                                 hfront-porch = <40>;
 367                                 vback-porch = <21>;
 368                                 vfront-porch = <7>;
 369                                 hsync-len = <60>;
 370                                 vsync-len = <10>;
 371                         };
 372                 };
 373         };
 374 };
 375
 376 &pcie {
 377         pinctrl-names = "default";
 378         pinctrl-0 = <&pinctrl_pcie>;
 379         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 380         status = "okay";
 381 };
 382
 383 &pwm1 {
 384         pinctrl-names = "default";
 385         pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
 386         status = "disabled";
 387 };
 388
 389 &pwm2 {
 390         pinctrl-names = "default";
 391         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 392         status = "disabled";
 393 };
 394
 395 &pwm3 {
 396         pinctrl-names = "default";
 397         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 398         status = "disabled";
 399 };
 400
 401 &pwm4 {
 402         pinctrl-names = "default", "state_dio";
 403         pinctrl-0 = <&pinctrl_pwm4_backlight>;
 404         pinctrl-1 = <&pinctrl_pwm4_dio>;
 405         status = "okay";
 406 };
 407
 408 &ssi1 {
 409         status = "okay";
 410 };
 411
 412 &ssi2 {
 413         status = "okay";
 414 };
 415
 416 &uart1 {
 417         pinctrl-names = "default";
 418         pinctrl-0 = <&pinctrl_uart1>;
 419         uart-has-rtscts;
 420         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 421         status = "okay";
 422 };
 423
 424 &uart2 {
 425         pinctrl-names = "default";
 426         pinctrl-0 = <&pinctrl_uart2>;
 427         status = "okay";
 428 };
 429
 430 &uart5 {
 431         pinctrl-names = "default";
 432         pinctrl-0 = <&pinctrl_uart5>;
 433         status = "okay";
 434 };
 435
 436 &usbotg {
 437         vbus-supply = <&reg_usb_otg_vbus>;
 438         pinctrl-names = "default";
 439         pinctrl-0 = <&pinctrl_usbotg>;
 440         disable-over-current;
 441         status = "okay";
 442 };
 443
 444 &usbh1 {
 445         vbus-supply = <&reg_usb_h1_vbus>;
 446         status = "okay";
 447 };
 448
 449 &usdhc3 {
 450         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 451         pinctrl-0 = <&pinctrl_usdhc3>;
 452         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 453         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 454         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 455         vmmc-supply = <&reg_3p3v>;
 456         no-1-8-v; /* firmware will remove if board revision supports */
 457         status = "okay";
 458 };
 459
 460 &wdog1 {
 461         status = "disabled";
 462 };
 463
 464 &wdog2 {
 465         pinctrl-names = "default";
 466         pinctrl-0 = <&pinctrl_wdog>;
 467         fsl,ext-reset-output;
 468         status = "okay";
 469 };
 470
 471 &iomuxc {
 472         imx6qdl-gw54xx {
 473                 pinctrl_audmux: audmuxgrp {
 474                         fsl,pins = <
 475                                 MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 476                                 MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 477                                 MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 478                                 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 479                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
 480                         >;
 481                 };
 482
 483                 pinctrl_enet: enetgrp {
 484                         fsl,pins = <
 485                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 486                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 487                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 488                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 489                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 490                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 491                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 492                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 493                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 494                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 495                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 496                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 497                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 498                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 499                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 500                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 501                         >;
 502                 };
 503
 504                 pinctrl_ecspi2: escpi2grp {
 505                         fsl,pins = <
 506                                 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
 507                                 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
 508                                 MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
 509                                 MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1
 510                         >;
 511                 };
 512
 513                 pinctrl_flexcan1: flexcan1grp {
 514                         fsl,pins = <
 515                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 516                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 517                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
 518                         >;
 519                 };
 520
 521                 pinctrl_gpio_leds: gpioledsgrp {
 522                         fsl,pins = <
 523                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 524                                 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 525                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 526                         >;
 527                 };
 528
 529                 pinctrl_gpmi_nand: gpminandgrp {
 530                         fsl,pins = <
 531                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 532                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 533                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 534                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 535                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 536                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 537                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 538                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 539                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 540                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 541                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 542                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 543                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 544                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 545                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 546                         >;
 547                 };
 548
 549                 pinctrl_i2c1: i2c1grp {
 550                         fsl,pins = <
 551                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 552                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 553                         >;
 554                 };
 555
 556                 pinctrl_i2c2: i2c2grp {
 557                         fsl,pins = <
 558                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 559                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 560                         >;
 561                 };
 562
 563                 pinctrl_i2c3: i2c3grp {
 564                         fsl,pins = <
 565                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 566                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 567                         >;
 568                 };
 569
 570                 pinctrl_pcie: pciegrp {
 571                         fsl,pins = <
 572                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0 /* PCIE IRQ */
 573                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE RST */
 574                         >;
 575                 };
 576
 577                 pinctrl_pps: ppsgrp {
 578                         fsl,pins = <
 579                                 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 580                         >;
 581                 };
 582
 583                 pinctrl_pwm1: pwm1grp {
 584                         fsl,pins = <
 585                                 MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 586                         >;
 587                 };
 588
 589                 pinctrl_pwm2: pwm2grp {
 590                         fsl,pins = <
 591                                 MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 592                         >;
 593                 };
 594
 595                 pinctrl_pwm3: pwm3grp {
 596                         fsl,pins = <
 597                                 MX6QDL_PAD_SD4_DAT1__PWM3_OUT           0x1b0b1
 598                         >;
 599                 };
 600
 601                 pinctrl_pwm4_backlight: pwm4grpbacklight {
 602                         fsl,pins = <
 603                                 /* LVDS_PWM J6.5 */
 604                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 605                         >;
 606                 };
 607
 608                 pinctrl_pwm4_dio: pwm4grpdio {
 609                         fsl,pins = <
 610                                 /* DIO3 J16.4 */
 611                                 MX6QDL_PAD_SD4_DAT2__PWM4_OUT           0x1b0b1
 612                         >;
 613                 };
 614
 615                 pinctrl_uart1: uart1grp {
 616                         fsl,pins = <
 617                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 618                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 619                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 620                         >;
 621                 };
 622
 623                 pinctrl_uart2: uart2grp {
 624                         fsl,pins = <
 625                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 626                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 627                         >;
 628                 };
 629
 630                 pinctrl_uart5: uart5grp {
 631                         fsl,pins = <
 632                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 633                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 634                         >;
 635                 };
 636
 637                 pinctrl_usbotg: usbotggrp {
 638                         fsl,pins = <
 639                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 640                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 641                         >;
 642                 };
 643
 644                 pinctrl_usdhc3: usdhc3grp {
 645                         fsl,pins = <
 646                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 647                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 648                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 649                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 650                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 651                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 652                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 653                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 654                         >;
 655                 };
 656
 657                 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 658                         fsl,pins = <
 659                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 660                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 661                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 662                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 663                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 664                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 665                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 666                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 667                         >;
 668                 };
 669
 670                 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 671                         fsl,pins = <
 672                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 673                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 674                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 675                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 676                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 677                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 678                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 679                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 680                         >;
 681                 };
 682
 683                 pinctrl_wdog: wdoggrp {
 684                         fsl,pins = <
 685                                 MX6QDL_PAD_SD1_DAT3__WDOG2_B            0x1b0b0
 686                         >;
 687                 };
 688         };
 689 };