arch/arm/boot/dts/imx6qdl.dtsi

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include <dt-bindings/interrupt-controller/arm-gic.h>
  14
  15 #include "skeleton.dtsi"
  16
  17 / {
  18         aliases {
  19                 ethernet0 = &fec;
  20                 can0 = &can1;
  21                 can1 = &can2;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28                 gpio6 = &gpio7;
  29                 i2c0 = &i2c1;
  30                 i2c1 = &i2c2;
  31                 i2c2 = &i2c3;
  32                 mmc0 = &usdhc1;
  33                 mmc1 = &usdhc2;
  34                 mmc2 = &usdhc3;
  35                 mmc3 = &usdhc4;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 serial4 = &uart5;
  41                 spi0 = &ecspi1;
  42                 spi1 = &ecspi2;
  43                 spi2 = &ecspi3;
  44                 spi3 = &ecspi4;
  45                 usbphy0 = &usbphy1;
  46                 usbphy1 = &usbphy2;
  47         };
  48
  49         intc: interrupt-controller@00a01000 {
  50                 compatible = "arm,cortex-a9-gic";
  51                 #interrupt-cells = <3>;
  52                 interrupt-controller;
  53                 reg = <0x00a01000 0x1000>,
  54                       <0x00a00100 0x100>;
  55         };
  56
  57         clocks {
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60
  61                 ckil {
  62                         compatible = "fsl,imx-ckil", "fixed-clock";
  63                         #clock-cells = <0>;
  64                         clock-frequency = <32768>;
  65                 };
  66
  67                 ckih1 {
  68                         compatible = "fsl,imx-ckih1", "fixed-clock";
  69                         #clock-cells = <0>;
  70                         clock-frequency = <0>;
  71                 };
  72
  73                 osc {
  74                         compatible = "fsl,imx-osc", "fixed-clock";
  75                         #clock-cells = <0>;
  76                         clock-frequency = <24000000>;
  77                 };
  78         };
  79
  80         soc {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 compatible = "simple-bus";
  84                 interrupt-parent = <&intc>;
  85                 ranges;
  86
  87                 dma_apbh: dma-apbh@00110000 {
  88                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
  89                         reg = <0x00110000 0x2000>;
  90                         interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
  91                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
  92                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
  93                                      <0 13 IRQ_TYPE_LEVEL_HIGH>;
  94                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
  95                         #dma-cells = <1>;
  96                         dma-channels = <4>;
  97                         clocks = <&clks 106>;
  98                 };
  99
 100                 gpmi: gpmi-nand@00112000 {
 101                         compatible = "fsl,imx6q-gpmi-nand";
 102                         #address-cells = <1>;
 103                         #size-cells = <1>;
 104                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 105                         reg-names = "gpmi-nand", "bch";
 106                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 107                         interrupt-names = "bch";
 108                         clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 109                                  <&clks 150>, <&clks 149>;
 110                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 111                                       "gpmi_bch_apb", "per1_bch";
 112                         dmas = <&dma_apbh 0>;
 113                         dma-names = "rx-tx";
 114                         status = "disabled";
 115                 };
 116
 117                 timer@00a00600 {
 118                         compatible = "arm,cortex-a9-twd-timer";
 119                         reg = <0x00a00600 0x20>;
 120                         interrupts = <1 13 0xf01>;
 121                         clocks = <&clks 15>;
 122                 };
 123
 124                 L2: l2-cache@00a02000 {
 125                         compatible = "arm,pl310-cache";
 126                         reg = <0x00a02000 0x1000>;
 127                         interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 128                         cache-unified;
 129                         cache-level = <2>;
 130                         arm,tag-latency = <4 2 3>;
 131                         arm,data-latency = <4 2 3>;
 132                 };
 133
 134                 pcie: pcie@0x01000000 {
 135                         compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 136                         reg = <0x01ffc000 0x4000>; /* DBI */
 137                         #address-cells = <3>;
 138                         #size-cells = <2>;
 139                         device_type = "pci";
 140                         ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
 141                                   0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 142                                   0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 143                         num-lanes = <1>;
 144                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 145                         interrupt-names = "msi";
 146                         #interrupt-cells = <1>;
 147                         interrupt-map-mask = <0 0 0 0x7>;
 148                         interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 149                                         <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 150                                         <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 151                                         <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 152                         clocks = <&clks 144>, <&clks 206>, <&clks 189>;
 153                         clock-names = "pcie", "pcie_bus", "pcie_phy";
 154                         status = "disabled";
 155                 };
 156
 157                 pmu {
 158                         compatible = "arm,cortex-a9-pmu";
 159                         interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 160                 };
 161
 162                 aips-bus@02000000 { /* AIPS1 */
 163                         compatible = "fsl,aips-bus", "simple-bus";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166                         reg = <0x02000000 0x100000>;
 167                         ranges;
 168
 169                         spba-bus@02000000 {
 170                                 compatible = "fsl,spba-bus", "simple-bus";
 171                                 #address-cells = <1>;
 172                                 #size-cells = <1>;
 173                                 reg = <0x02000000 0x40000>;
 174                                 ranges;
 175
 176                                 spdif: spdif@02004000 {
 177                                         compatible = "fsl,imx35-spdif";
 178                                         reg = <0x02004000 0x4000>;
 179                                         interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 180                                         dmas = <&sdma 14 18 0>,
 181                                                <&sdma 15 18 0>;
 182                                         dma-names = "rx", "tx";
 183                                         clocks = <&clks 197>, <&clks 3>,
 184                                                  <&clks 197>, <&clks 107>,
 185                                                  <&clks 0>,   <&clks 118>,
 186                                                  <&clks 0>,  <&clks 139>,
 187                                                  <&clks 0>;
 188                                         clock-names = "core",  "rxtx0",
 189                                                       "rxtx1", "rxtx2",
 190                                                       "rxtx3", "rxtx4",
 191                                                       "rxtx5", "rxtx6",
 192                                                       "rxtx7";
 193                                         status = "disabled";
 194                                 };
 195
 196                                 ecspi1: ecspi@02008000 {
 197                                         #address-cells = <1>;
 198                                         #size-cells = <0>;
 199                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 200                                         reg = <0x02008000 0x4000>;
 201                                         interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 202                                         clocks = <&clks 112>, <&clks 112>;
 203                                         clock-names = "ipg", "per";
 204                                         dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 205                                         dma-names = "rx", "tx";
 206                                         status = "disabled";
 207                                 };
 208
 209                                 ecspi2: ecspi@0200c000 {
 210                                         #address-cells = <1>;
 211                                         #size-cells = <0>;
 212                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 213                                         reg = <0x0200c000 0x4000>;
 214                                         interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 215                                         clocks = <&clks 113>, <&clks 113>;
 216                                         clock-names = "ipg", "per";
 217                                         dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 218                                         dma-names = "rx", "tx";
 219                                         status = "disabled";
 220                                 };
 221
 222                                 ecspi3: ecspi@02010000 {
 223                                         #address-cells = <1>;
 224                                         #size-cells = <0>;
 225                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 226                                         reg = <0x02010000 0x4000>;
 227                                         interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 228                                         clocks = <&clks 114>, <&clks 114>;
 229                                         clock-names = "ipg", "per";
 230                                         dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 231                                         dma-names = "rx", "tx";
 232                                         status = "disabled";
 233                                 };
 234
 235                                 ecspi4: ecspi@02014000 {
 236                                         #address-cells = <1>;
 237                                         #size-cells = <0>;
 238                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 239                                         reg = <0x02014000 0x4000>;
 240                                         interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 241                                         clocks = <&clks 115>, <&clks 115>;
 242                                         clock-names = "ipg", "per";
 243                                         dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 244                                         dma-names = "rx", "tx";
 245                                         status = "disabled";
 246                                 };
 247
 248                                 uart1: serial@02020000 {
 249                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 250                                         reg = <0x02020000 0x4000>;
 251                                         interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 252                                         clocks = <&clks 160>, <&clks 161>;
 253                                         clock-names = "ipg", "per";
 254                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 255                                         dma-names = "rx", "tx";
 256                                         status = "disabled";
 257                                 };
 258
 259                                 esai: esai@02024000 {
 260                                         reg = <0x02024000 0x4000>;
 261                                         interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 262                                 };
 263
 264                                 ssi1: ssi@02028000 {
 265                                         compatible = "fsl,imx6q-ssi",
 266                                                         "fsl,imx51-ssi",
 267                                                         "fsl,imx21-ssi";
 268                                         reg = <0x02028000 0x4000>;
 269                                         interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 270                                         clocks = <&clks 178>;
 271                                         dmas = <&sdma 37 1 0>,
 272                                                <&sdma 38 1 0>;
 273                                         dma-names = "rx", "tx";
 274                                         fsl,fifo-depth = <15>;
 275                                         fsl,ssi-dma-events = <38 37>;
 276                                         status = "disabled";
 277                                 };
 278
 279                                 ssi2: ssi@0202c000 {
 280                                         compatible = "fsl,imx6q-ssi",
 281                                                         "fsl,imx51-ssi",
 282                                                         "fsl,imx21-ssi";
 283                                         reg = <0x0202c000 0x4000>;
 284                                         interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 285                                         clocks = <&clks 179>;
 286                                         dmas = <&sdma 41 1 0>,
 287                                                <&sdma 42 1 0>;
 288                                         dma-names = "rx", "tx";
 289                                         fsl,fifo-depth = <15>;
 290                                         fsl,ssi-dma-events = <42 41>;
 291                                         status = "disabled";
 292                                 };
 293
 294                                 ssi3: ssi@02030000 {
 295                                         compatible = "fsl,imx6q-ssi",
 296                                                         "fsl,imx51-ssi",
 297                                                         "fsl,imx21-ssi";
 298                                         reg = <0x02030000 0x4000>;
 299                                         interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 300                                         clocks = <&clks 180>;
 301                                         dmas = <&sdma 45 1 0>,
 302                                                <&sdma 46 1 0>;
 303                                         dma-names = "rx", "tx";
 304                                         fsl,fifo-depth = <15>;
 305                                         fsl,ssi-dma-events = <46 45>;
 306                                         status = "disabled";
 307                                 };
 308
 309                                 asrc: asrc@02034000 {
 310                                         reg = <0x02034000 0x4000>;
 311                                         interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 312                                 };
 313
 314                                 spba@0203c000 {
 315                                         reg = <0x0203c000 0x4000>;
 316                                 };
 317                         };
 318
 319                         vpu: vpu@02040000 {
 320                                 reg = <0x02040000 0x3c000>;
 321                                 interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
 322                                              <0 12 IRQ_TYPE_LEVEL_HIGH>;
 323                         };
 324
 325                         aipstz@0207c000 { /* AIPSTZ1 */
 326                                 reg = <0x0207c000 0x4000>;
 327                         };
 328
 329                         pwm1: pwm@02080000 {
 330                                 #pwm-cells = <2>;
 331                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 332                                 reg = <0x02080000 0x4000>;
 333                                 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 334                                 clocks = <&clks 62>, <&clks 145>;
 335                                 clock-names = "ipg", "per";
 336                         };
 337
 338                         pwm2: pwm@02084000 {
 339                                 #pwm-cells = <2>;
 340                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 341                                 reg = <0x02084000 0x4000>;
 342                                 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 343                                 clocks = <&clks 62>, <&clks 146>;
 344                                 clock-names = "ipg", "per";
 345                         };
 346
 347                         pwm3: pwm@02088000 {
 348                                 #pwm-cells = <2>;
 349                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 350                                 reg = <0x02088000 0x4000>;
 351                                 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 352                                 clocks = <&clks 62>, <&clks 147>;
 353                                 clock-names = "ipg", "per";
 354                         };
 355
 356                         pwm4: pwm@0208c000 {
 357                                 #pwm-cells = <2>;
 358                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 359                                 reg = <0x0208c000 0x4000>;
 360                                 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 361                                 clocks = <&clks 62>, <&clks 148>;
 362                                 clock-names = "ipg", "per";
 363                         };
 364
 365                         can1: flexcan@02090000 {
 366                                 compatible = "fsl,imx6q-flexcan";
 367                                 reg = <0x02090000 0x4000>;
 368                                 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 369                                 clocks = <&clks 108>, <&clks 109>;
 370                                 clock-names = "ipg", "per";
 371                                 status = "disabled";
 372                         };
 373
 374                         can2: flexcan@02094000 {
 375                                 compatible = "fsl,imx6q-flexcan";
 376                                 reg = <0x02094000 0x4000>;
 377                                 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 378                                 clocks = <&clks 110>, <&clks 111>;
 379                                 clock-names = "ipg", "per";
 380                                 status = "disabled";
 381                         };
 382
 383                         gpt: gpt@02098000 {
 384                                 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 385                                 reg = <0x02098000 0x4000>;
 386                                 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 387                                 clocks = <&clks 119>, <&clks 120>;
 388                                 clock-names = "ipg", "per";
 389                         };
 390
 391                         gpio1: gpio@0209c000 {
 392                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 393                                 reg = <0x0209c000 0x4000>;
 394                                 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
 395                                              <0 67 IRQ_TYPE_LEVEL_HIGH>;
 396                                 gpio-controller;
 397                                 #gpio-cells = <2>;
 398                                 interrupt-controller;
 399                                 #interrupt-cells = <2>;
 400                         };
 401
 402                         gpio2: gpio@020a0000 {
 403                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 404                                 reg = <0x020a0000 0x4000>;
 405                                 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
 406                                              <0 69 IRQ_TYPE_LEVEL_HIGH>;
 407                                 gpio-controller;
 408                                 #gpio-cells = <2>;
 409                                 interrupt-controller;
 410                                 #interrupt-cells = <2>;
 411                         };
 412
 413                         gpio3: gpio@020a4000 {
 414                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 415                                 reg = <0x020a4000 0x4000>;
 416                                 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
 417                                              <0 71 IRQ_TYPE_LEVEL_HIGH>;
 418                                 gpio-controller;
 419                                 #gpio-cells = <2>;
 420                                 interrupt-controller;
 421                                 #interrupt-cells = <2>;
 422                         };
 423
 424                         gpio4: gpio@020a8000 {
 425                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 426                                 reg = <0x020a8000 0x4000>;
 427                                 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
 428                                              <0 73 IRQ_TYPE_LEVEL_HIGH>;
 429                                 gpio-controller;
 430                                 #gpio-cells = <2>;
 431                                 interrupt-controller;
 432                                 #interrupt-cells = <2>;
 433                         };
 434
 435                         gpio5: gpio@020ac000 {
 436                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 437                                 reg = <0x020ac000 0x4000>;
 438                                 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
 439                                              <0 75 IRQ_TYPE_LEVEL_HIGH>;
 440                                 gpio-controller;
 441                                 #gpio-cells = <2>;
 442                                 interrupt-controller;
 443                                 #interrupt-cells = <2>;
 444                         };
 445
 446                         gpio6: gpio@020b0000 {
 447                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 448                                 reg = <0x020b0000 0x4000>;
 449                                 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
 450                                              <0 77 IRQ_TYPE_LEVEL_HIGH>;
 451                                 gpio-controller;
 452                                 #gpio-cells = <2>;
 453                                 interrupt-controller;
 454                                 #interrupt-cells = <2>;
 455                         };
 456
 457                         gpio7: gpio@020b4000 {
 458                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 459                                 reg = <0x020b4000 0x4000>;
 460                                 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
 461                                              <0 79 IRQ_TYPE_LEVEL_HIGH>;
 462                                 gpio-controller;
 463                                 #gpio-cells = <2>;
 464                                 interrupt-controller;
 465                                 #interrupt-cells = <2>;
 466                         };
 467
 468                         kpp: kpp@020b8000 {
 469                                 compatible = "fsl,imx6qdl-kpp", "fsl,imx21-kpp";
 470                                 reg = <0x020b8000 0x4000>;
 471                                 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 472                                 clocks = <&clks 0>;
 473                         };
 474
 475                         wdog1: wdog@020bc000 {
 476                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 477                                 reg = <0x020bc000 0x4000>;
 478                                 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 479                                 clocks = <&clks 0>;
 480                         };
 481
 482                         wdog2: wdog@020c0000 {
 483                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 484                                 reg = <0x020c0000 0x4000>;
 485                                 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 486                                 clocks = <&clks 0>;
 487                                 status = "disabled";
 488                         };
 489
 490                         clks: ccm@020c4000 {
 491                                 compatible = "fsl,imx6q-ccm";
 492                                 reg = <0x020c4000 0x4000>;
 493                                 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
 494                                              <0 88 IRQ_TYPE_LEVEL_HIGH>;
 495                                 #clock-cells = <1>;
 496                         };
 497
 498                         anatop: anatop@020c8000 {
 499                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 500                                 reg = <0x020c8000 0x1000>;
 501                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 502                                              <0 54 IRQ_TYPE_LEVEL_HIGH>,
 503                                              <0 127 IRQ_TYPE_LEVEL_HIGH>;
 504
 505                                 regulator-1p1@110 {
 506                                         compatible = "fsl,anatop-regulator";
 507                                         regulator-name = "vdd1p1";
 508                                         regulator-min-microvolt = <800000>;
 509                                         regulator-max-microvolt = <1375000>;
 510                                         regulator-always-on;
 511                                         anatop-reg-offset = <0x110>;
 512                                         anatop-vol-bit-shift = <8>;
 513                                         anatop-vol-bit-width = <5>;
 514                                         anatop-min-bit-val = <4>;
 515                                         anatop-min-voltage = <800000>;
 516                                         anatop-max-voltage = <1375000>;
 517                                 };
 518
 519                                 regulator-3p0@120 {
 520                                         compatible = "fsl,anatop-regulator";
 521                                         regulator-name = "vdd3p0";
 522                                         regulator-min-microvolt = <2800000>;
 523                                         regulator-max-microvolt = <3150000>;
 524                                         regulator-always-on;
 525                                         anatop-reg-offset = <0x120>;
 526                                         anatop-vol-bit-shift = <8>;
 527                                         anatop-vol-bit-width = <5>;
 528                                         anatop-min-bit-val = <0>;
 529                                         anatop-min-voltage = <2625000>;
 530                                         anatop-max-voltage = <3400000>;
 531                                 };
 532
 533                                 regulator-2p5@130 {
 534                                         compatible = "fsl,anatop-regulator";
 535                                         regulator-name = "vdd2p5";
 536                                         regulator-min-microvolt = <2000000>;
 537                                         regulator-max-microvolt = <2750000>;
 538                                         regulator-always-on;
 539                                         anatop-reg-offset = <0x130>;
 540                                         anatop-vol-bit-shift = <8>;
 541                                         anatop-vol-bit-width = <5>;
 542                                         anatop-min-bit-val = <0>;
 543                                         anatop-min-voltage = <2000000>;
 544                                         anatop-max-voltage = <2750000>;
 545                                 };
 546
 547                                 reg_arm: regulator-vddcore@140 {
 548                                         compatible = "fsl,anatop-regulator";
 549                                         regulator-name = "vddarm";
 550                                         regulator-min-microvolt = <725000>;
 551                                         regulator-max-microvolt = <1450000>;
 552                                         regulator-always-on;
 553                                         anatop-reg-offset = <0x140>;
 554                                         anatop-vol-bit-shift = <0>;
 555                                         anatop-vol-bit-width = <5>;
 556                                         anatop-delay-reg-offset = <0x170>;
 557                                         anatop-delay-bit-shift = <24>;
 558                                         anatop-delay-bit-width = <2>;
 559                                         anatop-min-bit-val = <1>;
 560                                         anatop-min-voltage = <725000>;
 561                                         anatop-max-voltage = <1450000>;
 562                                 };
 563
 564                                 reg_pu: regulator-vddpu@140 {
 565                                         compatible = "fsl,anatop-regulator";
 566                                         regulator-name = "vddpu";
 567                                         regulator-min-microvolt = <725000>;
 568                                         regulator-max-microvolt = <1450000>;
 569                                         regulator-always-on;
 570                                         anatop-reg-offset = <0x140>;
 571                                         anatop-vol-bit-shift = <9>;
 572                                         anatop-vol-bit-width = <5>;
 573                                         anatop-delay-reg-offset = <0x170>;
 574                                         anatop-delay-bit-shift = <26>;
 575                                         anatop-delay-bit-width = <2>;
 576                                         anatop-min-bit-val = <1>;
 577                                         anatop-min-voltage = <725000>;
 578                                         anatop-max-voltage = <1450000>;
 579                                 };
 580
 581                                 reg_soc: regulator-vddsoc@140 {
 582                                         compatible = "fsl,anatop-regulator";
 583                                         regulator-name = "vddsoc";
 584                                         regulator-min-microvolt = <725000>;
 585                                         regulator-max-microvolt = <1450000>;
 586                                         regulator-always-on;
 587                                         anatop-reg-offset = <0x140>;
 588                                         anatop-vol-bit-shift = <18>;
 589                                         anatop-vol-bit-width = <5>;
 590                                         anatop-delay-reg-offset = <0x170>;
 591                                         anatop-delay-bit-shift = <28>;
 592                                         anatop-delay-bit-width = <2>;
 593                                         anatop-min-bit-val = <1>;
 594                                         anatop-min-voltage = <725000>;
 595                                         anatop-max-voltage = <1450000>;
 596                                 };
 597                         };
 598
 599                         tempmon: tempmon {
 600                                 compatible = "fsl,imx6q-tempmon";
 601                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 602                                 fsl,tempmon = <&anatop>;
 603                                 fsl,tempmon-data = <&ocotp>;
 604                                 clocks = <&clks 172>;
 605                         };
 606
 607                         usbphy1: usbphy@020c9000 {
 608                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 609                                 reg = <0x020c9000 0x1000>;
 610                                 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 611                                 clocks = <&clks 182>;
 612                                 fsl,anatop = <&anatop>;
 613                         };
 614
 615                         usbphy2: usbphy@020ca000 {
 616                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 617                                 reg = <0x020ca000 0x1000>;
 618                                 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 619                                 clocks = <&clks 183>;
 620                                 fsl,anatop = <&anatop>;
 621                         };
 622
 623                         snvs@020cc000 {
 624                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 625                                 #address-cells = <1>;
 626                                 #size-cells = <1>;
 627                                 ranges = <0 0x020cc000 0x4000>;
 628
 629                                 snvs-rtc-lp@34 {
 630                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 631                                         reg = <0x34 0x58>;
 632                                         interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 633                                                      <0 20 IRQ_TYPE_LEVEL_HIGH>;
 634                                 };
 635                         };
 636
 637                         epit1: epit@020d0000 { /* EPIT1 */
 638                                 reg = <0x020d0000 0x4000>;
 639                                 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 640                         };
 641
 642                         epit2: epit@020d4000 { /* EPIT2 */
 643                                 reg = <0x020d4000 0x4000>;
 644                                 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 645                         };
 646
 647                         src: src@020d8000 {
 648                                 compatible = "fsl,imx6q-src", "fsl,imx51-src";
 649                                 reg = <0x020d8000 0x4000>;
 650                                 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
 651                                              <0 96 IRQ_TYPE_LEVEL_HIGH>;
 652                                 #reset-cells = <1>;
 653                         };
 654
 655                         gpc: gpc@020dc000 {
 656                                 compatible = "fsl,imx6q-gpc";
 657                                 reg = <0x020dc000 0x4000>;
 658                                 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 659                                              <0 90 IRQ_TYPE_LEVEL_HIGH>;
 660                         };
 661
 662                         gpr: iomuxc-gpr@020e0000 {
 663                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
 664                                 reg = <0x020e0000 0x38>;
 665                         };
 666
 667                         iomuxc: iomuxc@020e0000 {
 668                                 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 669                                 reg = <0x020e0000 0x4000>;
 670                         };
 671
 672                         ldb: ldb@020e0008 {
 673                                 #address-cells = <1>;
 674                                 #size-cells = <0>;
 675                                 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
 676                                 gpr = <&gpr>;
 677                                 status = "disabled";
 678
 679                                 lvds-channel@0 {
 680                                         #address-cells = <1>;
 681                                         #size-cells = <0>;
 682                                         reg = <0>;
 683                                         status = "disabled";
 684
 685                                         port@0 {
 686                                                 reg = <0>;
 687
 688                                                 lvds0_mux_0: endpoint {
 689                                                         remote-endpoint = <&ipu1_di0_lvds0>;
 690                                                 };
 691                                         };
 692
 693                                         port@1 {
 694                                                 reg = <1>;
 695
 696                                                 lvds0_mux_1: endpoint {
 697                                                         remote-endpoint = <&ipu1_di1_lvds0>;
 698                                                 };
 699                                         };
 700                                 };
 701
 702                                 lvds-channel@1 {
 703                                         #address-cells = <1>;
 704                                         #size-cells = <0>;
 705                                         reg = <1>;
 706                                         status = "disabled";
 707
 708                                         port@0 {
 709                                                 reg = <0>;
 710
 711                                                 lvds1_mux_0: endpoint {
 712                                                         remote-endpoint = <&ipu1_di0_lvds1>;
 713                                                 };
 714                                         };
 715
 716                                         port@1 {
 717                                                 reg = <1>;
 718
 719                                                 lvds1_mux_1: endpoint {
 720                                                         remote-endpoint = <&ipu1_di1_lvds1>;
 721                                                 };
 722                                         };
 723                                 };
 724                         };
 725
 726                         hdmi: hdmi@0120000 {
 727                                 #address-cells = <1>;
 728                                 #size-cells = <0>;
 729                                 reg = <0x00120000 0x9000>;
 730                                 interrupts = <0 115 0x04>;
 731                                 gpr = <&gpr>;
 732                                 clocks = <&clks 123>, <&clks 124>;
 733                                 clock-names = "iahb", "isfr";
 734                                 status = "disabled";
 735
 736                                 port@0 {
 737                                         reg = <0>;
 738
 739                                         hdmi_mux_0: endpoint {
 740                                                 remote-endpoint = <&ipu1_di0_hdmi>;
 741                                         };
 742                                 };
 743
 744                                 port@1 {
 745                                         reg = <1>;
 746
 747                                         hdmi_mux_1: endpoint {
 748                                                 remote-endpoint = <&ipu1_di1_hdmi>;
 749                                         };
 750                                 };
 751                         };
 752
 753                         dcic1: dcic@020e4000 {
 754                                 reg = <0x020e4000 0x4000>;
 755                                 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 756                         };
 757
 758                         dcic2: dcic@020e8000 {
 759                                 reg = <0x020e8000 0x4000>;
 760                                 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 761                         };
 762
 763                         sdma: sdma@020ec000 {
 764                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 765                                 reg = <0x020ec000 0x4000>;
 766                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 767                                 clocks = <&clks 155>, <&clks 155>;
 768                                 clock-names = "ipg", "ahb";
 769                                 #dma-cells = <3>;
 770                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 771                         };
 772                 };
 773
 774                 aips-bus@02100000 { /* AIPS2 */
 775                         compatible = "fsl,aips-bus", "simple-bus";
 776                         #address-cells = <1>;
 777                         #size-cells = <1>;
 778                         reg = <0x02100000 0x100000>;
 779                         ranges;
 780
 781                         caam@02100000 {
 782                                 reg = <0x02100000 0x40000>;
 783                                 interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
 784                                              <0 106 IRQ_TYPE_LEVEL_HIGH>;
 785                         };
 786
 787                         aipstz@0217c000 { /* AIPSTZ2 */
 788                                 reg = <0x0217c000 0x4000>;
 789                         };
 790
 791                         usbotg: usb@02184000 {
 792                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 793                                 reg = <0x02184000 0x200>;
 794                                 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 795                                 clocks = <&clks 162>;
 796                                 fsl,usbphy = <&usbphy1>;
 797                                 fsl,usbmisc = <&usbmisc 0>;
 798                                 status = "disabled";
 799                         };
 800
 801                         usbh1: usb@02184200 {
 802                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 803                                 reg = <0x02184200 0x200>;
 804                                 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 805                                 clocks = <&clks 162>;
 806                                 fsl,usbphy = <&usbphy2>;
 807                                 fsl,usbmisc = <&usbmisc 1>;
 808                                 status = "disabled";
 809                         };
 810
 811                         usbh2: usb@02184400 {
 812                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 813                                 reg = <0x02184400 0x200>;
 814                                 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 815                                 clocks = <&clks 162>;
 816                                 fsl,usbmisc = <&usbmisc 2>;
 817                                 status = "disabled";
 818                         };
 819
 820                         usbh3: usb@02184600 {
 821                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 822                                 reg = <0x02184600 0x200>;
 823                                 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 824                                 clocks = <&clks 162>;
 825                                 fsl,usbmisc = <&usbmisc 3>;
 826                                 status = "disabled";
 827                         };
 828
 829                         usbmisc: usbmisc@02184800 {
 830                                 #index-cells = <1>;
 831                                 compatible = "fsl,imx6q-usbmisc";
 832                                 reg = <0x02184800 0x200>;
 833                                 clocks = <&clks 162>;
 834                         };
 835
 836                         fec: ethernet@02188000 {
 837                                 compatible = "fsl,imx6q-fec";
 838                                 reg = <0x02188000 0x4000>;
 839                                 interrupts-extended =
 840                                         <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
 841                                         <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 842                                 clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 843                                 clock-names = "ipg", "ahb", "ptp";
 844                                 status = "disabled";
 845                         };
 846
 847                         mlb@0218c000 {
 848                                 reg = <0x0218c000 0x4000>;
 849                                 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
 850                                              <0 117 IRQ_TYPE_LEVEL_HIGH>,
 851                                              <0 126 IRQ_TYPE_LEVEL_HIGH>;
 852                         };
 853
 854                         usdhc1: usdhc@02190000 {
 855                                 compatible = "fsl,imx6q-usdhc";
 856                                 reg = <0x02190000 0x4000>;
 857                                 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 858                                 clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 859                                 clock-names = "ipg", "ahb", "per";
 860                                 bus-width = <4>;
 861                                 status = "disabled";
 862                         };
 863
 864                         usdhc2: usdhc@02194000 {
 865                                 compatible = "fsl,imx6q-usdhc";
 866                                 reg = <0x02194000 0x4000>;
 867                                 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 868                                 clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 869                                 clock-names = "ipg", "ahb", "per";
 870                                 bus-width = <4>;
 871                                 status = "disabled";
 872                         };
 873
 874                         usdhc3: usdhc@02198000 {
 875                                 compatible = "fsl,imx6q-usdhc";
 876                                 reg = <0x02198000 0x4000>;
 877                                 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 878                                 clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 879                                 clock-names = "ipg", "ahb", "per";
 880                                 bus-width = <4>;
 881                                 status = "disabled";
 882                         };
 883
 884                         usdhc4: usdhc@0219c000 {
 885                                 compatible = "fsl,imx6q-usdhc";
 886                                 reg = <0x0219c000 0x4000>;
 887                                 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 888                                 clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 889                                 clock-names = "ipg", "ahb", "per";
 890                                 bus-width = <4>;
 891                                 status = "disabled";
 892                         };
 893
 894                         i2c1: i2c@021a0000 {
 895                                 #address-cells = <1>;
 896                                 #size-cells = <0>;
 897                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 898                                 reg = <0x021a0000 0x4000>;
 899                                 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 900                                 clocks = <&clks 125>;
 901                                 status = "disabled";
 902                         };
 903
 904                         i2c2: i2c@021a4000 {
 905                                 #address-cells = <1>;
 906                                 #size-cells = <0>;
 907                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 908                                 reg = <0x021a4000 0x4000>;
 909                                 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 910                                 clocks = <&clks 126>;
 911                                 status = "disabled";
 912                         };
 913
 914                         i2c3: i2c@021a8000 {
 915                                 #address-cells = <1>;
 916                                 #size-cells = <0>;
 917                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 918                                 reg = <0x021a8000 0x4000>;
 919                                 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 920                                 clocks = <&clks 127>;
 921                                 status = "disabled";
 922                         };
 923
 924                         romcp@021ac000 {
 925                                 reg = <0x021ac000 0x4000>;
 926                         };
 927
 928                         mmdc0: mmdc@021b0000 { /* MMDC0 */
 929                                 compatible = "fsl,imx6q-mmdc";
 930                                 reg = <0x021b0000 0x4000>;
 931                         };
 932
 933                         mmdc1: mmdc@021b4000 { /* MMDC1 */
 934                                 reg = <0x021b4000 0x4000>;
 935                         };
 936
 937                         weim: weim@021b8000 {
 938                                 compatible = "fsl,imx6q-weim";
 939                                 reg = <0x021b8000 0x4000>;
 940                                 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 941                                 clocks = <&clks 196>;
 942                         };
 943
 944                         ocotp: ocotp@021bc000 {
 945                                 compatible = "fsl,imx6q-ocotp", "syscon";
 946                                 reg = <0x021bc000 0x4000>;
 947                         };
 948
 949                         tzasc@021d0000 { /* TZASC1 */
 950                                 reg = <0x021d0000 0x4000>;
 951                                 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 952                         };
 953
 954                         tzasc@021d4000 { /* TZASC2 */
 955                                 reg = <0x021d4000 0x4000>;
 956                                 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 957                         };
 958
 959                         audmux: audmux@021d8000 {
 960                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 961                                 reg = <0x021d8000 0x4000>;
 962                                 status = "disabled";
 963                         };
 964
 965                         mipi_csi: mipi@021dc000 {
 966                                 reg = <0x021dc000 0x4000>;
 967                         };
 968
 969                         mipi_dsi: mipi@021e0000 {
 970                                 #address-cells = <1>;
 971                                 #size-cells = <0>;
 972                                 reg = <0x021e0000 0x4000>;
 973                                 status = "disabled";
 974
 975                                 port@0 {
 976                                         reg = <0>;
 977
 978                                         mipi_mux_0: endpoint {
 979                                                 remote-endpoint = <&ipu1_di0_mipi>;
 980                                         };
 981                                 };
 982
 983                                 port@1 {
 984                                         reg = <1>;
 985
 986                                         mipi_mux_1: endpoint {
 987                                                 remote-endpoint = <&ipu1_di1_mipi>;
 988                                         };
 989                                 };
 990                         };
 991
 992                         vdoa@021e4000 {
 993                                 reg = <0x021e4000 0x4000>;
 994                                 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 995                         };
 996
 997                         uart2: serial@021e8000 {
 998                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 999                                 reg = <0x021e8000 0x4000>;
1000                                 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
1001                                 clocks = <&clks 160>, <&clks 161>;
1002                                 clock-names = "ipg", "per";
1003                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1004                                 dma-names = "rx", "tx";
1005                                 status = "disabled";
1006                         };
1007
1008                         uart3: serial@021ec000 {
1009                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1010                                 reg = <0x021ec000 0x4000>;
1011                                 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
1012                                 clocks = <&clks 160>, <&clks 161>;
1013                                 clock-names = "ipg", "per";
1014                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1015                                 dma-names = "rx", "tx";
1016                                 status = "disabled";
1017                         };
1018
1019                         uart4: serial@021f0000 {
1020                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1021                                 reg = <0x021f0000 0x4000>;
1022                                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
1023                                 clocks = <&clks 160>, <&clks 161>;
1024                                 clock-names = "ipg", "per";
1025                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1026                                 dma-names = "rx", "tx";
1027                                 status = "disabled";
1028                         };
1029
1030                         uart5: serial@021f4000 {
1031                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1032                                 reg = <0x021f4000 0x4000>;
1033                                 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
1034                                 clocks = <&clks 160>, <&clks 161>;
1035                                 clock-names = "ipg", "per";
1036                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1037                                 dma-names = "rx", "tx";
1038                                 status = "disabled";
1039                         };
1040                 };
1041
1042                 ipu1: ipu@02400000 {
1043                         #address-cells = <1>;
1044                         #size-cells = <0>;
1045                         compatible = "fsl,imx6q-ipu";
1046                         reg = <0x02400000 0x400000>;
1047                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
1048                                      <0 5 IRQ_TYPE_LEVEL_HIGH>;
1049                         clocks = <&clks 130>, <&clks 131>, <&clks 132>;
1050                         clock-names = "bus", "di0", "di1";
1051                         resets = <&src 2>;
1052
1053                         ipu1_di0: port@2 {
1054                                 #address-cells = <1>;
1055                                 #size-cells = <0>;
1056                                 reg = <2>;
1057
1058                                 ipu1_di0_disp0: endpoint@0 {
1059                                 };
1060
1061                                 ipu1_di0_hdmi: endpoint@1 {
1062                                         remote-endpoint = <&hdmi_mux_0>;
1063                                 };
1064
1065                                 ipu1_di0_mipi: endpoint@2 {
1066                                         remote-endpoint = <&mipi_mux_0>;
1067                                 };
1068
1069                                 ipu1_di0_lvds0: endpoint@3 {
1070                                         remote-endpoint = <&lvds0_mux_0>;
1071                                 };
1072
1073                                 ipu1_di0_lvds1: endpoint@4 {
1074                                         remote-endpoint = <&lvds1_mux_0>;
1075                                 };
1076                         };
1077
1078                         ipu1_di1: port@3 {
1079                                 #address-cells = <1>;
1080                                 #size-cells = <0>;
1081                                 reg = <3>;
1082
1083                                 ipu1_di0_disp1: endpoint@0 {
1084                                 };
1085
1086                                 ipu1_di1_hdmi: endpoint@1 {
1087                                         remote-endpoint = <&hdmi_mux_1>;
1088                                 };
1089
1090                                 ipu1_di1_mipi: endpoint@2 {
1091                                         remote-endpoint = <&mipi_mux_1>;
1092                                 };
1093
1094                                 ipu1_di1_lvds0: endpoint@3 {
1095                                         remote-endpoint = <&lvds0_mux_1>;
1096                                 };
1097
1098                                 ipu1_di1_lvds1: endpoint@4 {
1099                                         remote-endpoint = <&lvds1_mux_1>;
1100                                 };
1101                         };
1102                 };
1103         };
1104 };