arch/arm/boot/dts/kirkwood-ts219.dtsi

   1 / {
   2         model = "QNAP TS219 family";
   3         compatible = "qnap,ts219", "marvell,kirkwood";
   4
   5         memory {
   6                 device_type = "memory";
   7                 reg = <0x00000000 0x20000000>;
   8         };
   9
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         mbus {
  15                 pcie-controller {
  16                         status = "okay";
  17
  18                         pcie@1,0 {
  19                                 status = "okay";
  20                         };
  21                 };
  22         };
  23
  24         ocp@f1000000 {
  25                 i2c@11000 {
  26                         status = "okay";
  27                         clock-frequency = <400000>;
  28                         pinctrl-0 = <&pmx_twsi0>;
  29                         pinctrl-names = "default";
  30
  31                         s35390a: s35390a@30 {
  32                                 compatible = "s35390a";
  33                                 reg = <0x30>;
  34                         };
  35                 };
  36                 serial@12000 {
  37                         clock-frequency = <200000000>;
  38                         status = "okay";
  39                         pinctrl-0 = <&pmx_uart0>;
  40                         pinctrl-names = "default";
  41                 };
  42                 serial@12100 {
  43                         clock-frequency = <200000000>;
  44                         status = "okay";
  45                         pinctrl-0 = <&pmx_uart1>;
  46                         pinctrl-names = "default";
  47                 };
  48                 poweroff@12100 {
  49                         compatible = "qnap,power-off";
  50                         reg = <0x12000 0x100>;
  51                         clocks = <&gate_clk 7>;
  52                 };
  53                 spi@10600 {
  54                         status = "okay";
  55                         pinctrl-0 = <&pmx_spi>;
  56                         pinctrl-names = "default";
  57
  58                         m25p128@0 {
  59                                 #address-cells = <1>;
  60                                 #size-cells = <1>;
  61                                 compatible = "m25p128";
  62                                 reg = <0>;
  63                                 spi-max-frequency = <20000000>;
  64                                 mode = <0>;
  65
  66                                 partition@0000000 {
  67                                         reg = <0x00000000 0x00080000>;
  68                                         label = "U-Boot";
  69                                 };
  70
  71                                 partition@00200000 {
  72                                         reg = <0x00200000 0x00200000>;
  73                                         label = "Kernel";
  74                                 };
  75
  76                                 partition@00400000 {
  77                                         reg = <0x00400000 0x00900000>;
  78                                         label = "RootFS1";
  79                                 };
  80                                 partition@00d00000 {
  81                                         reg = <0x00d00000 0x00300000>;
  82                                         label = "RootFS2";
  83                                 };
  84                                 partition@00040000 {
  85                                         reg = <0x00080000 0x00040000>;
  86                                         label = "U-Boot Config";
  87                                 };
  88                                 partition@000c0000 {
  89                                         reg = <0x000c0000 0x00140000>;
  90                                         label = "NAS Config";
  91                                 };
  92                         };
  93                 };
  94                 sata@80000 {
  95                         pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
  96                         pinctrl-names = "default";
  97                         status = "okay";
  98                         nr-ports = <2>;
  99                 };
 100         };
 101 };
 102
 103 &mdio {
 104         status = "okay";
 105
 106         ethphy0: ethernet-phy {
 107                 device_type = "ethernet-phy";
 108                 /* overwrite reg property in board file */
 109         };
 110 };
 111
 112 &eth0 {
 113         status = "okay";
 114         ethernet0-port@0 {
 115                 phy-handle = <&ethphy0>;
 116         };
 117 };