arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi

   1 /*
   2  * Common CPCAP configuration used on Motorola phones
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 &mcspi1 {
  10         cpcap: pmic@0 {
  11                 compatible = "motorola,cpcap", "st,6556002";
  12                 reg = <0>;      /* cs0 */
  13                 interrupt-parent = <&gpio1>;
  14                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
  15                 interrupt-controller;
  16                 #interrupt-cells = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 spi-max-frequency = <3000000>;
  20                 spi-cs-high;
  21
  22                 cpcap_adc: adc {
  23                         compatible = "motorola,mapphone-cpcap-adc";
  24                         interrupts-extended = <&cpcap 8 0>;
  25                         interrupt-names = "adcdone";
  26                         #io-channel-cells = <1>;
  27                 };
  28
  29                 cpcap_battery: battery {
  30                         compatible = "motorola,cpcap-battery";
  31                         interrupts-extended = <
  32                                 &cpcap 6 0 &cpcap 5 0 &cpcap 3 0
  33                                 &cpcap 20 0 &cpcap 54 0
  34                         >;
  35                         interrupt-names =
  36                                 "eol", "lowbph", "lowbpl",
  37                                 "chrgcurr1", "battdetb";
  38                         io-channels = <&cpcap_adc 0 &cpcap_adc 1
  39                                        &cpcap_adc 5 &cpcap_adc 6>;
  40                         io-channel-names = "battdetb", "battp",
  41                                            "chg_isense", "batti";
  42                         power-supplies = <&cpcap_charger>;
  43                 };
  44
  45                 cpcap_charger: charger {
  46                         compatible = "motorola,mapphone-cpcap-charger";
  47                         interrupts-extended = <
  48                                 &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
  49                                 &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
  50                         >;
  51                         interrupt-names =
  52                                 "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
  53                                 "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
  54                         mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
  55                                       &gpio3 23 GPIO_ACTIVE_LOW>;
  56                         io-channels = <&cpcap_adc 0 &cpcap_adc 1
  57                                        &cpcap_adc 2 &cpcap_adc 5
  58                                        &cpcap_adc 6>;
  59                         io-channel-names = "battdetb", "battp",
  60                                            "vbus", "chg_isense",
  61                                            "batti";
  62                 };
  63
  64                 cpcap_regulator: regulator {
  65                         compatible = "motorola,mapphone-cpcap-regulator";
  66
  67                         cpcap_regulators: regulators {
  68                         };
  69                 };
  70
  71                 cpcap_rtc: rtc {
  72                         compatible = "motorola,cpcap-rtc";
  73
  74                         interrupt-parent = <&cpcap>;
  75                         interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
  76                 };
  77
  78                 power_button: button {
  79                         compatible = "motorola,cpcap-pwrbutton";
  80
  81                         interrupts = <23 IRQ_TYPE_NONE>;
  82                 };
  83
  84                 cpcap_usb2_phy: phy {
  85                         compatible = "motorola,mapphone-cpcap-usb-phy";
  86                         pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
  87                         pinctrl-1 = <&usb_ulpi_pins>;
  88                         pinctrl-2 = <&usb_utmi_pins>;
  89                         pinctrl-3 = <&uart3_pins>;
  90                         pinctrl-names = "default", "ulpi", "utmi", "uart";
  91                         #phy-cells = <0>;
  92                         interrupts-extended = <
  93                                 &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
  94                                 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
  95                                 &cpcap 48 1
  96                         >;
  97                         interrupt-names =
  98                                 "id_ground", "id_float", "se0conn", "vbusvld",
  99                                 "sessvld", "sessend", "se1", "dm", "dp";
 100                         mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
 101                                       &gpio1 0 GPIO_ACTIVE_HIGH>;
 102                         io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
 103                         io-channel-names = "vbus", "id";
 104                         vusb-supply = <&vusb>;
 105                 };
 106
 107                 led_red: led-red {
 108                         compatible = "motorola,cpcap-led-red";
 109                         vdd-supply = <&sw5>;
 110                         label = "status-led:red";
 111                 };
 112
 113                 led_green: led-green {
 114                         compatible = "motorola,cpcap-led-green";
 115                         vdd-supply = <&sw5>;
 116                         label = "status-led:green";
 117                 };
 118
 119                 led_blue: led-blue {
 120                         compatible = "motorola,cpcap-led-blue";
 121                         vdd-supply = <&sw5>;
 122                         label = "status-led:blue";
 123                 };
 124
 125                 led_adl: led-adl {
 126                         compatible = "motorola,cpcap-led-adl";
 127                         vdd-supply = <&sw5>;
 128                         label = "button-backlight";
 129                 };
 130
 131                 led_cp: led-cp {
 132                         compatible = "motorola,cpcap-led-cp";
 133                         vdd-supply = <&sw5>;
 134                         label = "shift-key-light";
 135                 };
 136         };
 137 };
 138
 139 &cpcap_regulators {
 140         sw5: SW5 {
 141                 regulator-min-microvolt = <5050000>;
 142                 regulator-max-microvolt = <5050000>;
 143                 regulator-enable-ramp-delay = <50000>;
 144                 regulator-boot-on;
 145         };
 146
 147         vcam: VCAM {
 148                 regulator-min-microvolt = <2900000>;
 149                 regulator-max-microvolt = <2900000>;
 150                 regulator-enable-ramp-delay = <1000>;
 151         };
 152
 153         /* Used by DSS */
 154         vcsi: VCSI {
 155                 regulator-min-microvolt = <1800000>;
 156                 regulator-max-microvolt = <1800000>;
 157                 regulator-enable-ramp-delay = <1000>;
 158                 regulator-boot-on;
 159         };
 160
 161         vdac: VDAC {
 162                 regulator-min-microvolt = <1800000>;
 163                 regulator-max-microvolt = <1800000>;
 164                 regulator-enable-ramp-delay = <1000>;
 165         };
 166
 167         vdig: VDIG {
 168                 regulator-min-microvolt = <1875000>;
 169                 regulator-max-microvolt = <1875000>;
 170                 regulator-enable-ramp-delay = <1000>;
 171         };
 172
 173         vfuse: VFUSE {
 174                 regulator-min-microvolt = <1500000>;
 175                 regulator-max-microvolt = <3150000>;
 176                 regulator-enable-ramp-delay = <1000>;
 177         };
 178
 179         vhvio: VHVIO {
 180                 regulator-min-microvolt = <2775000>;
 181                 regulator-max-microvolt = <2775000>;
 182                 regulator-enable-ramp-delay = <1000>;
 183                 regulator-always-on;
 184         };
 185
 186         /* Used by eMMC at mmc2 */
 187         vsdio: VSDIO {
 188                 regulator-min-microvolt = <2900000>;
 189                 regulator-max-microvolt = <2900000>;
 190                 regulator-enable-ramp-delay = <1000>;
 191         };
 192
 193         vpll: VPLL {
 194                 regulator-min-microvolt = <1200000>;
 195                 regulator-max-microvolt = <1800000>;
 196                 regulator-enable-ramp-delay = <100>;
 197         };
 198
 199         vrf1: VRF1 {
 200                 regulator-min-microvolt = <2775000>;
 201                 regulator-max-microvolt = <2775000>;
 202                 regulator-enable-ramp-delay = <1000>;
 203         };
 204
 205         vrf2: VRF2 {
 206                 regulator-min-microvolt = <2775000>;
 207                 regulator-max-microvolt = <2775000>;
 208                 regulator-enable-ramp-delay = <1000>;
 209         };
 210
 211         vrfref: VRFREF {
 212                 regulator-min-microvolt = <2500000>;
 213                 regulator-max-microvolt = <2775000>;
 214                 regulator-enable-ramp-delay = <100>;
 215         };
 216
 217         vwlan1: VWLAN1 {
 218                 regulator-min-microvolt = <1800000>;
 219                 regulator-max-microvolt = <1900000>;
 220                 regulator-enable-ramp-delay = <1000>;
 221         };
 222
 223         /* Used by micro-SDIO at mmc1 */
 224         vwlan2: VWLAN2 {
 225                 regulator-min-microvolt = <3000000>;
 226                 regulator-max-microvolt = <3000000>;
 227                 regulator-enable-ramp-delay = <1000>;
 228         };
 229
 230         vsim: VSIM {
 231                 regulator-min-microvolt = <1800000>;
 232                 regulator-max-microvolt = <2900000>;
 233                 regulator-enable-ramp-delay = <1000>;
 234         };
 235
 236         vsimcard: VSIMCARD {
 237                 regulator-min-microvolt = <1800000>;
 238                 regulator-max-microvolt = <2900000>;
 239                 regulator-enable-ramp-delay = <1000>;
 240         };
 241
 242         vvib: VVIB {
 243                 regulator-min-microvolt = <1300000>;
 244                 regulator-max-microvolt = <3000000>;
 245                 regulator-enable-ramp-delay = <500>;
 246         };
 247
 248         vusb: VUSB {
 249                 regulator-min-microvolt = <3300000>;
 250                 regulator-max-microvolt = <3300000>;
 251                 regulator-enable-ramp-delay = <1000>;
 252         };
 253
 254         vaudio: VAUDIO {
 255                 regulator-min-microvolt = <2775000>;
 256                 regulator-max-microvolt = <2775000>;
 257                 regulator-enable-ramp-delay = <1000>;
 258         };
 259 };