arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

   1 /*
   2  * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * TobiDuo expansion board is manufactured by Gumstix Inc.
  11  */
  12
  13 #include "omap3-overo-common-peripherals.dtsi"
  14
  15 #include "omap-gpmc-smsc9221.dtsi"
  16
  17 &gpmc {
  18         ranges = <4 0 0x2b000000 0x1000000>,    /* CS4 */
  19                  <5 0 0x2c000000 0x1000000>;    /* CS5 */
  20
  21         smsc1: ethernet@gpmc {
  22                 reg = <5 0 0xff>;
  23                 interrupt-parent = <&gpio6>;
  24                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;   /* GPIO 176 */
  25         };
  26
  27         smsc2: ethernet@4,0 {
  28                 compatible = "smsc,lan9221","smsc,lan9115";
  29                 bank-width = <2>;
  30
  31                 gpmc,mux-add-data;
  32                 gpmc,cs-on-ns = <0>;
  33                 gpmc,cs-rd-off-ns = <42>;
  34                 gpmc,cs-wr-off-ns = <36>;
  35                 gpmc,adv-on-ns = <6>;
  36                 gpmc,adv-rd-off-ns = <12>;
  37                 gpmc,adv-wr-off-ns = <12>;
  38                 gpmc,oe-on-ns = <0>;
  39                 gpmc,oe-off-ns = <42>;
  40                 gpmc,we-on-ns = <0>;
  41                 gpmc,we-off-ns = <36>;
  42                 gpmc,rd-cycle-ns = <60>;
  43                 gpmc,wr-cycle-ns = <54>;
  44                 gpmc,access-ns = <36>;
  45                 gpmc,page-burst-access-ns = <0>;
  46                 gpmc,bus-turnaround-ns = <0>;
  47                 gpmc,cycle2cycle-delay-ns = <0>;
  48                 gpmc,wr-data-mux-bus-ns = <18>;
  49                 gpmc,wr-access-ns = <42>;
  50                 gpmc,cycle2cycle-samecsen;
  51                 gpmc,cycle2cycle-diffcsen;
  52                 vddvario-supply = <&vddvario>;
  53                 vdd33a-supply = <&vdd33a>;
  54                 reg-io-width = <4>;
  55                 smsc,save-mac-address;
  56
  57                 reg = <4 0 0xff>;
  58                 interrupt-parent = <&gpio3>;
  59                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;    /* GPIO 65 */
  60         };
  61 };
  62
  63 &lis33de {
  64         status = "disabled";
  65 };