block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time

[karo-tx-linux.git] / block / blk-core.c

/*
 * Copyright (C) 1991, 1992 Linus Torvalds
 * Copyright (C) 1994,      Karl Keyte: Added support for disk statistics
 * Elevator latency, (C) 2000  Andrea Arcangeli <andrea@suse.de> SuSE
 * Queue request tables / lock, selectable elevator, Jens Axboe <axboe@suse.de>
 * kernel-doc documentation started by NeilBrown <neilb@cse.unsw.edu.au>
 *      -  July2000
 * bio rewrite, highmem i/o, etc, Jens Axboe <axboe@suse.de> - may 2001
 */

/*
 * This handles all read/write requests to block devices
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/backing-dev.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/fault-inject.h>
#include <linux/list_sort.h>
#include <linux/delay.h>
#include <linux/ratelimit.h>
#include <linux/pm_runtime.h>
#include <linux/blk-cgroup.h>
#include <linux/debugfs.h>

#define CREATE_TRACE_POINTS
#include <trace/events/block.h>

#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-sched.h"
#include "blk-wbt.h"

#ifdef CONFIG_DEBUG_FS
struct dentry *blk_debugfs_root;
#endif

EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_split);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_unplug);

DEFINE_IDA(blk_queue_ida);

/*
 * For the allocated request tables
 */
struct kmem_cache *request_cachep;

/*
 * For queue allocation
 */
struct kmem_cache *blk_requestq_cachep;

/*
 * Controlling structure to kblockd
 */
static struct workqueue_struct *kblockd_workqueue;

static void blk_clear_congested(struct request_list *rl, int sync)
{
#ifdef CONFIG_CGROUP_WRITEBACK
        clear_wb_congested(rl->blkg->wb_congested, sync);
#else
        /*
         * If !CGROUP_WRITEBACK, all blkg's map to bdi->wb and we shouldn't
         * flip its congestion state for events on other blkcgs.
         */
        if (rl == &rl->q->root_rl)
                clear_wb_congested(rl->q->backing_dev_info->wb.congested, sync);
#endif
}

static void blk_set_congested(struct request_list *rl, int sync)
{
#ifdef CONFIG_CGROUP_WRITEBACK
        set_wb_congested(rl->blkg->wb_congested, sync);
#else
        /* see blk_clear_congested() */
        if (rl == &rl->q->root_rl)
                set_wb_congested(rl->q->backing_dev_info->wb.congested, sync);
#endif
}

void blk_queue_congestion_threshold(struct request_queue *q)
{
        int nr;

        nr = q->nr_requests - (q->nr_requests / 8) + 1;
        if (nr > q->nr_requests)
                nr = q->nr_requests;
        q->nr_congestion_on = nr;

        nr = q->nr_requests - (q->nr_requests / 8) - (q->nr_requests / 16) - 1;
        if (nr < 1)
                nr = 1;
        q->nr_congestion_off = nr;
}

void blk_rq_init(struct request_queue *q, struct request *rq)
{
        memset(rq, 0, sizeof(*rq));

        INIT_LIST_HEAD(&rq->queuelist);
        INIT_LIST_HEAD(&rq->timeout_list);
        rq->cpu = -1;
        rq->q = q;
        rq->__sector = (sector_t) -1;
        INIT_HLIST_NODE(&rq->hash);
        RB_CLEAR_NODE(&rq->rb_node);
        rq->tag = -1;
        rq->internal_tag = -1;
        rq->start_time = jiffies;
        set_start_time_ns(rq);
        rq->part = NULL;
}
EXPORT_SYMBOL(blk_rq_init);

static const struct {
        int             errno;
        const char      *name;
} blk_errors[] = {
        [BLK_STS_OK]            = { 0,          "" },
        [BLK_STS_NOTSUPP]       = { -EOPNOTSUPP, "operation not supported" },
        [BLK_STS_TIMEOUT]       = { -ETIMEDOUT, "timeout" },
        [BLK_STS_NOSPC]         = { -ENOSPC,    "critical space allocation" },
        [BLK_STS_TRANSPORT]     = { -ENOLINK,   "recoverable transport" },
        [BLK_STS_TARGET]        = { -EREMOTEIO, "critical target" },
        [BLK_STS_NEXUS]         = { -EBADE,     "critical nexus" },
        [BLK_STS_MEDIUM]        = { -ENODATA,   "critical medium" },
        [BLK_STS_PROTECTION]    = { -EILSEQ,    "protection" },
        [BLK_STS_RESOURCE]      = { -ENOMEM,    "kernel resource" },
        [BLK_STS_AGAIN]         = { -EAGAIN,    "nonblocking retry" },

        /* device mapper special case, should not leak out: */
        [BLK_STS_DM_REQUEUE]    = { -EREMCHG, "dm internal retry" },

        /* everything else not covered above: */
        [BLK_STS_IOERR]         = { -EIO,       "I/O" },
};

blk_status_t errno_to_blk_status(int errno)
{
        int i;

        for (i = 0; i < ARRAY_SIZE(blk_errors); i++) {
                if (blk_errors[i].errno == errno)
                        return (__force blk_status_t)i;
        }

        return BLK_STS_IOERR;
}
EXPORT_SYMBOL_GPL(errno_to_blk_status);

int blk_status_to_errno(blk_status_t status)
{
        int idx = (__force int)status;

        if (WARN_ON_ONCE(idx >= ARRAY_SIZE(blk_errors)))
                return -EIO;
        return blk_errors[idx].errno;
}
EXPORT_SYMBOL_GPL(blk_status_to_errno);

static void print_req_error(struct request *req, blk_status_t status)
{
        int idx = (__force int)status;

        if (WARN_ON_ONCE(idx >= ARRAY_SIZE(blk_errors)))
                return;

        printk_ratelimited(KERN_ERR "%s: %s error, dev %s, sector %llu\n",
                           __func__, blk_errors[idx].name, req->rq_disk ?
                           req->rq_disk->disk_name : "?",
                           (unsigned long long)blk_rq_pos(req));
}

static void req_bio_endio(struct request *rq, struct bio *bio,
                          unsigned int nbytes, blk_status_t error)
{
        if (error)
                bio->bi_status = error;

        if (unlikely(rq->rq_flags & RQF_QUIET))
                bio_set_flag(bio, BIO_QUIET);

        bio_advance(bio, nbytes);

        /* don't actually finish bio if it's part of flush sequence */
        if (bio->bi_iter.bi_size == 0 && !(rq->rq_flags & RQF_FLUSH_SEQ))
                bio_endio(bio);
}

void blk_dump_rq_flags(struct request *rq, char *msg)
{
        printk(KERN_INFO "%s: dev %s: flags=%llx\n", msg,
                rq->rq_disk ? rq->rq_disk->disk_name : "?",
                (unsigned long long) rq->cmd_flags);

        printk(KERN_INFO "  sector %llu, nr/cnr %u/%u\n",
               (unsigned long long)blk_rq_pos(rq),
               blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
        printk(KERN_INFO "  bio %p, biotail %p, len %u\n",
               rq->bio, rq->biotail, blk_rq_bytes(rq));
}
EXPORT_SYMBOL(blk_dump_rq_flags);

static void blk_delay_work(struct work_struct *work)
{
        struct request_queue *q;

        q = container_of(work, struct request_queue, delay_work.work);
        spin_lock_irq(q->queue_lock);
        __blk_run_queue(q);
        spin_unlock_irq(q->queue_lock);
}

/**
 * blk_delay_queue - restart queueing after defined interval
 * @q:          The &struct request_queue in question
 * @msecs:      Delay in msecs
 *
 * Description:
 *   Sometimes queueing needs to be postponed for a little while, to allow
 *   resources to come back. This function will make sure that queueing is
 *   restarted around the specified time.
 */
void blk_delay_queue(struct request_queue *q, unsigned long msecs)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        if (likely(!blk_queue_dead(q)))
                queue_delayed_work(kblockd_workqueue, &q->delay_work,
                                   msecs_to_jiffies(msecs));
}
EXPORT_SYMBOL(blk_delay_queue);

/**
 * blk_start_queue_async - asynchronously restart a previously stopped queue
 * @q:    The &struct request_queue in question
 *
 * Description:
 *   blk_start_queue_async() will clear the stop flag on the queue, and
 *   ensure that the request_fn for the queue is run from an async
 *   context.
 **/
void blk_start_queue_async(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        queue_flag_clear(QUEUE_FLAG_STOPPED, q);
        blk_run_queue_async(q);
}
EXPORT_SYMBOL(blk_start_queue_async);

/**
 * blk_start_queue - restart a previously stopped queue
 * @q:    The &struct request_queue in question
 *
 * Description:
 *   blk_start_queue() will clear the stop flag on the queue, and call
 *   the request_fn for the queue if it was in a stopped state when
 *   entered. Also see blk_stop_queue().
 **/
void blk_start_queue(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON(!irqs_disabled());
        WARN_ON_ONCE(q->mq_ops);

        queue_flag_clear(QUEUE_FLAG_STOPPED, q);
        __blk_run_queue(q);
}
EXPORT_SYMBOL(blk_start_queue);

/**
 * blk_stop_queue - stop a queue
 * @q:    The &struct request_queue in question
 *
 * Description:
 *   The Linux block layer assumes that a block driver will consume all
 *   entries on the request queue when the request_fn strategy is called.
 *   Often this will not happen, because of hardware limitations (queue
 *   depth settings). If a device driver gets a 'queue full' response,
 *   or if it simply chooses not to queue more I/O at one point, it can
 *   call this function to prevent the request_fn from being called until
 *   the driver has signalled it's ready to go again. This happens by calling
 *   blk_start_queue() to restart queue operations.
 **/
void blk_stop_queue(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        cancel_delayed_work(&q->delay_work);
        queue_flag_set(QUEUE_FLAG_STOPPED, q);
}
EXPORT_SYMBOL(blk_stop_queue);

/**
 * blk_sync_queue - cancel any pending callbacks on a queue
 * @q: the queue
 *
 * Description:
 *     The block layer may perform asynchronous callback activity
 *     on a queue, such as calling the unplug function after a timeout.
 *     A block device may call blk_sync_queue to ensure that any
 *     such activity is cancelled, thus allowing it to release resources
 *     that the callbacks might use. The caller must already have made sure
 *     that its ->make_request_fn will not re-add plugging prior to calling
 *     this function.
 *
 *     This function does not cancel any asynchronous activity arising
 *     out of elevator or throttling code. That would require elevator_exit()
 *     and blkcg_exit_queue() to be called with queue lock initialized.
 *
 */
void blk_sync_queue(struct request_queue *q)
{
        del_timer_sync(&q->timeout);

        if (q->mq_ops) {
                struct blk_mq_hw_ctx *hctx;
                int i;

                queue_for_each_hw_ctx(q, hctx, i)
                        cancel_delayed_work_sync(&hctx->run_work);
        } else {
                cancel_delayed_work_sync(&q->delay_work);
        }
}
EXPORT_SYMBOL(blk_sync_queue);

/**
 * __blk_run_queue_uncond - run a queue whether or not it has been stopped
 * @q:  The queue to run
 *
 * Description:
 *    Invoke request handling on a queue if there are any pending requests.
 *    May be used to restart request handling after a request has completed.
 *    This variant runs the queue whether or not the queue has been
 *    stopped. Must be called with the queue lock held and interrupts
 *    disabled. See also @blk_run_queue.
 */
inline void __blk_run_queue_uncond(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        if (unlikely(blk_queue_dead(q)))
                return;

        /*
         * Some request_fn implementations, e.g. scsi_request_fn(), unlock
         * the queue lock internally. As a result multiple threads may be
         * running such a request function concurrently. Keep track of the
         * number of active request_fn invocations such that blk_drain_queue()
         * can wait until all these request_fn calls have finished.
         */
        q->request_fn_active++;
        q->request_fn(q);
        q->request_fn_active--;
}
EXPORT_SYMBOL_GPL(__blk_run_queue_uncond);

/**
 * __blk_run_queue - run a single device queue
 * @q:  The queue to run
 *
 * Description:
 *    See @blk_run_queue.
 */
void __blk_run_queue(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        if (unlikely(blk_queue_stopped(q)))
                return;

        __blk_run_queue_uncond(q);
}
EXPORT_SYMBOL(__blk_run_queue);

/**
 * blk_run_queue_async - run a single device queue in workqueue context
 * @q:  The queue to run
 *
 * Description:
 *    Tells kblockd to perform the equivalent of @blk_run_queue on behalf
 *    of us.
 *
 * Note:
 *    Since it is not allowed to run q->delay_work after blk_cleanup_queue()
 *    has canceled q->delay_work, callers must hold the queue lock to avoid
 *    race conditions between blk_cleanup_queue() and blk_run_queue_async().
 */
void blk_run_queue_async(struct request_queue *q)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        if (likely(!blk_queue_stopped(q) && !blk_queue_dead(q)))
                mod_delayed_work(kblockd_workqueue, &q->delay_work, 0);
}
EXPORT_SYMBOL(blk_run_queue_async);

/**
 * blk_run_queue - run a single device queue
 * @q: The queue to run
 *
 * Description:
 *    Invoke request handling on this queue, if it has pending work to do.
 *    May be used to restart queueing when a request has completed.
 */
void blk_run_queue(struct request_queue *q)
{
        unsigned long flags;

        WARN_ON_ONCE(q->mq_ops);

        spin_lock_irqsave(q->queue_lock, flags);
        __blk_run_queue(q);
        spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_run_queue);

void blk_put_queue(struct request_queue *q)
{
        kobject_put(&q->kobj);
}
EXPORT_SYMBOL(blk_put_queue);

/**
 * __blk_drain_queue - drain requests from request_queue
 * @q: queue to drain
 * @drain_all: whether to drain all requests or only the ones w/ ELVPRIV
 *
 * Drain requests from @q.  If @drain_all is set, all requests are drained.
 * If not, only ELVPRIV requests are drained.  The caller is responsible
 * for ensuring that no new requests which need to be drained are queued.
 */
static void __blk_drain_queue(struct request_queue *q, bool drain_all)
        __releases(q->queue_lock)
        __acquires(q->queue_lock)
{
        int i;

        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        while (true) {
                bool drain = false;

                /*
                 * The caller might be trying to drain @q before its
                 * elevator is initialized.
                 */
                if (q->elevator)
                        elv_drain_elevator(q);

                blkcg_drain_queue(q);

                /*
                 * This function might be called on a queue which failed
                 * driver init after queue creation or is not yet fully
                 * active yet.  Some drivers (e.g. fd and loop) get unhappy
                 * in such cases.  Kick queue iff dispatch queue has
                 * something on it and @q has request_fn set.
                 */
                if (!list_empty(&q->queue_head) && q->request_fn)
                        __blk_run_queue(q);

                drain |= q->nr_rqs_elvpriv;
                drain |= q->request_fn_active;

                /*
                 * Unfortunately, requests are queued at and tracked from
                 * multiple places and there's no single counter which can
                 * be drained.  Check all the queues and counters.
                 */
                if (drain_all) {
                        struct blk_flush_queue *fq = blk_get_flush_queue(q, NULL);
                        drain |= !list_empty(&q->queue_head);
                        for (i = 0; i < 2; i++) {
                                drain |= q->nr_rqs[i];
                                drain |= q->in_flight[i];
                                if (fq)
                                    drain |= !list_empty(&fq->flush_queue[i]);
                        }
                }

                if (!drain)
                        break;

                spin_unlock_irq(q->queue_lock);

                msleep(10);

                spin_lock_irq(q->queue_lock);
        }

        /*
         * With queue marked dead, any woken up waiter will fail the
         * allocation path, so the wakeup chaining is lost and we're
         * left with hung waiters. We need to wake up those waiters.
         */
        if (q->request_fn) {
                struct request_list *rl;

                blk_queue_for_each_rl(rl, q)
                        for (i = 0; i < ARRAY_SIZE(rl->wait); i++)
                                wake_up_all(&rl->wait[i]);
        }
}

/**
 * blk_queue_bypass_start - enter queue bypass mode
 * @q: queue of interest
 *
 * In bypass mode, only the dispatch FIFO queue of @q is used.  This
 * function makes @q enter bypass mode and drains all requests which were
 * throttled or issued before.  On return, it's guaranteed that no request
 * is being throttled or has ELVPRIV set and blk_queue_bypass() %true
 * inside queue or RCU read lock.
 */
void blk_queue_bypass_start(struct request_queue *q)
{
        WARN_ON_ONCE(q->mq_ops);

        spin_lock_irq(q->queue_lock);
        q->bypass_depth++;
        queue_flag_set(QUEUE_FLAG_BYPASS, q);
        spin_unlock_irq(q->queue_lock);

        /*
         * Queues start drained.  Skip actual draining till init is
         * complete.  This avoids lenghty delays during queue init which
         * can happen many times during boot.
         */
        if (blk_queue_init_done(q)) {
                spin_lock_irq(q->queue_lock);
                __blk_drain_queue(q, false);
                spin_unlock_irq(q->queue_lock);

                /* ensure blk_queue_bypass() is %true inside RCU read lock */
                synchronize_rcu();
        }
}
EXPORT_SYMBOL_GPL(blk_queue_bypass_start);

/**
 * blk_queue_bypass_end - leave queue bypass mode
 * @q: queue of interest
 *
 * Leave bypass mode and restore the normal queueing behavior.
 *
 * Note: although blk_queue_bypass_start() is only called for blk-sq queues,
 * this function is called for both blk-sq and blk-mq queues.
 */
void blk_queue_bypass_end(struct request_queue *q)
{
        spin_lock_irq(q->queue_lock);
        if (!--q->bypass_depth)
                queue_flag_clear(QUEUE_FLAG_BYPASS, q);
        WARN_ON_ONCE(q->bypass_depth < 0);
        spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL_GPL(blk_queue_bypass_end);

void blk_set_queue_dying(struct request_queue *q)
{
        spin_lock_irq(q->queue_lock);
        queue_flag_set(QUEUE_FLAG_DYING, q);
        spin_unlock_irq(q->queue_lock);

        /*
         * When queue DYING flag is set, we need to block new req
         * entering queue, so we call blk_freeze_queue_start() to
         * prevent I/O from crossing blk_queue_enter().
         */
        blk_freeze_queue_start(q);

        if (q->mq_ops)
                blk_mq_wake_waiters(q);
        else {
                struct request_list *rl;

                spin_lock_irq(q->queue_lock);
                blk_queue_for_each_rl(rl, q) {
                        if (rl->rq_pool) {
                                wake_up(&rl->wait[BLK_RW_SYNC]);
                                wake_up(&rl->wait[BLK_RW_ASYNC]);
                        }
                }
                spin_unlock_irq(q->queue_lock);
        }
}
EXPORT_SYMBOL_GPL(blk_set_queue_dying);

/**
 * blk_cleanup_queue - shutdown a request queue
 * @q: request queue to shutdown
 *
 * Mark @q DYING, drain all pending requests, mark @q DEAD, destroy and
 * put it.  All future requests will be failed immediately with -ENODEV.
 */
void blk_cleanup_queue(struct request_queue *q)
{
        spinlock_t *lock = q->queue_lock;

        /* mark @q DYING, no new request or merges will be allowed afterwards */
        mutex_lock(&q->sysfs_lock);
        blk_set_queue_dying(q);
        spin_lock_irq(lock);

        /*
         * A dying queue is permanently in bypass mode till released.  Note
         * that, unlike blk_queue_bypass_start(), we aren't performing
         * synchronize_rcu() after entering bypass mode to avoid the delay
         * as some drivers create and destroy a lot of queues while
         * probing.  This is still safe because blk_release_queue() will be
         * called only after the queue refcnt drops to zero and nothing,
         * RCU or not, would be traversing the queue by then.
         */
        q->bypass_depth++;
        queue_flag_set(QUEUE_FLAG_BYPASS, q);

        queue_flag_set(QUEUE_FLAG_NOMERGES, q);
        queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
        queue_flag_set(QUEUE_FLAG_DYING, q);
        spin_unlock_irq(lock);
        mutex_unlock(&q->sysfs_lock);

        /*
         * Drain all requests queued before DYING marking. Set DEAD flag to
         * prevent that q->request_fn() gets invoked after draining finished.
         */
        blk_freeze_queue(q);
        spin_lock_irq(lock);
        if (!q->mq_ops)
                __blk_drain_queue(q, true);
        queue_flag_set(QUEUE_FLAG_DEAD, q);
        spin_unlock_irq(lock);

        /* for synchronous bio-based driver finish in-flight integrity i/o */
        blk_flush_integrity();

        /* @q won't process any more request, flush async actions */
        del_timer_sync(&q->backing_dev_info->laptop_mode_wb_timer);
        blk_sync_queue(q);

        if (q->mq_ops)
                blk_mq_free_queue(q);
        percpu_ref_exit(&q->q_usage_counter);

        spin_lock_irq(lock);
        if (q->queue_lock != &q->__queue_lock)
                q->queue_lock = &q->__queue_lock;
        spin_unlock_irq(lock);

        /* @q is and will stay empty, shutdown and put */
        blk_put_queue(q);
}
EXPORT_SYMBOL(blk_cleanup_queue);

/* Allocate memory local to the request queue */
static void *alloc_request_simple(gfp_t gfp_mask, void *data)
{
        struct request_queue *q = data;

        return kmem_cache_alloc_node(request_cachep, gfp_mask, q->node);
}

static void free_request_simple(void *element, void *data)
{
        kmem_cache_free(request_cachep, element);
}

static void *alloc_request_size(gfp_t gfp_mask, void *data)
{
        struct request_queue *q = data;
        struct request *rq;

        rq = kmalloc_node(sizeof(struct request) + q->cmd_size, gfp_mask,
                        q->node);
        if (rq && q->init_rq_fn && q->init_rq_fn(q, rq, gfp_mask) < 0) {
                kfree(rq);
                rq = NULL;
        }
        return rq;
}

static void free_request_size(void *element, void *data)
{
        struct request_queue *q = data;

        if (q->exit_rq_fn)
                q->exit_rq_fn(q, element);
        kfree(element);
}

int blk_init_rl(struct request_list *rl, struct request_queue *q,
                gfp_t gfp_mask)
{
        if (unlikely(rl->rq_pool))
                return 0;

        rl->q = q;
        rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
        rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
        init_waitqueue_head(&rl->wait[BLK_RW_SYNC]);
        init_waitqueue_head(&rl->wait[BLK_RW_ASYNC]);

        if (q->cmd_size) {
                rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ,
                                alloc_request_size, free_request_size,
                                q, gfp_mask, q->node);
        } else {
                rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ,
                                alloc_request_simple, free_request_simple,
                                q, gfp_mask, q->node);
        }
        if (!rl->rq_pool)
                return -ENOMEM;

        if (rl != &q->root_rl)
                WARN_ON_ONCE(!blk_get_queue(q));

        return 0;
}

void blk_exit_rl(struct request_queue *q, struct request_list *rl)
{
        if (rl->rq_pool) {
                mempool_destroy(rl->rq_pool);
                if (rl != &q->root_rl)
                        blk_put_queue(q);
        }
}

struct request_queue *blk_alloc_queue(gfp_t gfp_mask)
{
        return blk_alloc_queue_node(gfp_mask, NUMA_NO_NODE);
}
EXPORT_SYMBOL(blk_alloc_queue);

int blk_queue_enter(struct request_queue *q, bool nowait)
{
        while (true) {
                int ret;

                if (percpu_ref_tryget_live(&q->q_usage_counter))
                        return 0;

                if (nowait)
                        return -EBUSY;

                /*
                 * read pair of barrier in blk_freeze_queue_start(),
                 * we need to order reading __PERCPU_REF_DEAD flag of
                 * .q_usage_counter and reading .mq_freeze_depth or
                 * queue dying flag, otherwise the following wait may
                 * never return if the two reads are reordered.
                 */
                smp_rmb();

                ret = wait_event_interruptible(q->mq_freeze_wq,
                                !atomic_read(&q->mq_freeze_depth) ||
                                blk_queue_dying(q));
                if (blk_queue_dying(q))
                        return -ENODEV;
                if (ret)
                        return ret;
        }
}

void blk_queue_exit(struct request_queue *q)
{
        percpu_ref_put(&q->q_usage_counter);
}

static void blk_queue_usage_counter_release(struct percpu_ref *ref)
{
        struct request_queue *q =
                container_of(ref, struct request_queue, q_usage_counter);

        wake_up_all(&q->mq_freeze_wq);
}

static void blk_rq_timed_out_timer(unsigned long data)
{
        struct request_queue *q = (struct request_queue *)data;

        kblockd_schedule_work(&q->timeout_work);
}

struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
{
        struct request_queue *q;

        q = kmem_cache_alloc_node(blk_requestq_cachep,
                                gfp_mask | __GFP_ZERO, node_id);
        if (!q)
                return NULL;

        q->id = ida_simple_get(&blk_queue_ida, 0, 0, gfp_mask);
        if (q->id < 0)
                goto fail_q;

        q->bio_split = bioset_create(BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
        if (!q->bio_split)
                goto fail_id;

        q->backing_dev_info = bdi_alloc_node(gfp_mask, node_id);
        if (!q->backing_dev_info)
                goto fail_split;

        q->stats = blk_alloc_queue_stats();
        if (!q->stats)
                goto fail_stats;

        q->backing_dev_info->ra_pages =
                        (VM_MAX_READAHEAD * 1024) / PAGE_SIZE;
        q->backing_dev_info->capabilities = BDI_CAP_CGROUP_WRITEBACK;
        q->backing_dev_info->name = "block";
        q->node = node_id;

        setup_timer(&q->backing_dev_info->laptop_mode_wb_timer,
                    laptop_mode_timer_fn, (unsigned long) q);
        setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q);
        INIT_LIST_HEAD(&q->queue_head);
        INIT_LIST_HEAD(&q->timeout_list);
        INIT_LIST_HEAD(&q->icq_list);
#ifdef CONFIG_BLK_CGROUP
        INIT_LIST_HEAD(&q->blkg_list);
#endif
        INIT_DELAYED_WORK(&q->delay_work, blk_delay_work);

        kobject_init(&q->kobj, &blk_queue_ktype);

        mutex_init(&q->sysfs_lock);
        spin_lock_init(&q->__queue_lock);

        /*
         * By default initialize queue_lock to internal lock and driver can
         * override it later if need be.
         */
        q->queue_lock = &q->__queue_lock;

        /*
         * A queue starts its life with bypass turned on to avoid
         * unnecessary bypass on/off overhead and nasty surprises during
         * init.  The initial bypass will be finished when the queue is
         * registered by blk_register_queue().
         */
        q->bypass_depth = 1;
        __set_bit(QUEUE_FLAG_BYPASS, &q->queue_flags);

        init_waitqueue_head(&q->mq_freeze_wq);

        /*
         * Init percpu_ref in atomic mode so that it's faster to shutdown.
         * See blk_register_queue() for details.
         */
        if (percpu_ref_init(&q->q_usage_counter,
                                blk_queue_usage_counter_release,
                                PERCPU_REF_INIT_ATOMIC, GFP_KERNEL))
                goto fail_bdi;

        if (blkcg_init_queue(q))
                goto fail_ref;

        return q;

fail_ref:
        percpu_ref_exit(&q->q_usage_counter);
fail_bdi:
        blk_free_queue_stats(q->stats);
fail_stats:
        bdi_put(q->backing_dev_info);
fail_split:
        bioset_free(q->bio_split);
fail_id:
        ida_simple_remove(&blk_queue_ida, q->id);
fail_q:
        kmem_cache_free(blk_requestq_cachep, q);
        return NULL;
}
EXPORT_SYMBOL(blk_alloc_queue_node);

/**
 * blk_init_queue  - prepare a request queue for use with a block device
 * @rfn:  The function to be called to process requests that have been
 *        placed on the queue.
 * @lock: Request queue spin lock
 *
 * Description:
 *    If a block device wishes to use the standard request handling procedures,
 *    which sorts requests and coalesces adjacent requests, then it must
 *    call blk_init_queue().  The function @rfn will be called when there
 *    are requests on the queue that need to be processed.  If the device
 *    supports plugging, then @rfn may not be called immediately when requests
 *    are available on the queue, but may be called at some time later instead.
 *    Plugged queues are generally unplugged when a buffer belonging to one
 *    of the requests on the queue is needed, or due to memory pressure.
 *
 *    @rfn is not required, or even expected, to remove all requests off the
 *    queue, but only as many as it can handle at a time.  If it does leave
 *    requests on the queue, it is responsible for arranging that the requests
 *    get dealt with eventually.
 *
 *    The queue spin lock must be held while manipulating the requests on the
 *    request queue; this lock will be taken also from interrupt context, so irq
 *    disabling is needed for it.
 *
 *    Function returns a pointer to the initialized request queue, or %NULL if
 *    it didn't succeed.
 *
 * Note:
 *    blk_init_queue() must be paired with a blk_cleanup_queue() call
 *    when the block device is deactivated (such as at module unload).
 **/

struct request_queue *blk_init_queue(request_fn_proc *rfn, spinlock_t *lock)
{
        return blk_init_queue_node(rfn, lock, NUMA_NO_NODE);
}
EXPORT_SYMBOL(blk_init_queue);

struct request_queue *
blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
{
        struct request_queue *q;

        q = blk_alloc_queue_node(GFP_KERNEL, node_id);
        if (!q)
                return NULL;

        q->request_fn = rfn;
        if (lock)
                q->queue_lock = lock;
        if (blk_init_allocated_queue(q) < 0) {
                blk_cleanup_queue(q);
                return NULL;
        }

        return q;
}
EXPORT_SYMBOL(blk_init_queue_node);

static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio);


int blk_init_allocated_queue(struct request_queue *q)
{
        WARN_ON_ONCE(q->mq_ops);

        q->fq = blk_alloc_flush_queue(q, NUMA_NO_NODE, q->cmd_size);
        if (!q->fq)
                return -ENOMEM;

        if (q->init_rq_fn && q->init_rq_fn(q, q->fq->flush_rq, GFP_KERNEL))
                goto out_free_flush_queue;

        if (blk_init_rl(&q->root_rl, q, GFP_KERNEL))
                goto out_exit_flush_rq;

        INIT_WORK(&q->timeout_work, blk_timeout_work);
        q->queue_flags          |= QUEUE_FLAG_DEFAULT;

        /*
         * This also sets hw/phys segments, boundary and size
         */
        blk_queue_make_request(q, blk_queue_bio);

        q->sg_reserved_size = INT_MAX;

        /* Protect q->elevator from elevator_change */
        mutex_lock(&q->sysfs_lock);

        /* init elevator */
        if (elevator_init(q, NULL)) {
                mutex_unlock(&q->sysfs_lock);
                goto out_exit_flush_rq;
        }

        mutex_unlock(&q->sysfs_lock);
        return 0;

out_exit_flush_rq:
        if (q->exit_rq_fn)
                q->exit_rq_fn(q, q->fq->flush_rq);
out_free_flush_queue:
        blk_free_flush_queue(q->fq);
        return -ENOMEM;
}
EXPORT_SYMBOL(blk_init_allocated_queue);

bool blk_get_queue(struct request_queue *q)
{
        if (likely(!blk_queue_dying(q))) {
                __blk_get_queue(q);
                return true;
        }

        return false;
}
EXPORT_SYMBOL(blk_get_queue);

static inline void blk_free_request(struct request_list *rl, struct request *rq)
{
        if (rq->rq_flags & RQF_ELVPRIV) {
                elv_put_request(rl->q, rq);
                if (rq->elv.icq)
                        put_io_context(rq->elv.icq->ioc);
        }

        mempool_free(rq, rl->rq_pool);
}

/*
 * ioc_batching returns true if the ioc is a valid batching request and
 * should be given priority access to a request.
 */
static inline int ioc_batching(struct request_queue *q, struct io_context *ioc)
{
        if (!ioc)
                return 0;

        /*
         * Make sure the process is able to allocate at least 1 request
         * even if the batch times out, otherwise we could theoretically
         * lose wakeups.
         */
        return ioc->nr_batch_requests == q->nr_batching ||
                (ioc->nr_batch_requests > 0
                && time_before(jiffies, ioc->last_waited + BLK_BATCH_TIME));
}

/*
 * ioc_set_batching sets ioc to be a new "batcher" if it is not one. This
 * will cause the process to be a "batcher" on all queues in the system. This
 * is the behaviour we want though - once it gets a wakeup it should be given
 * a nice run.
 */
static void ioc_set_batching(struct request_queue *q, struct io_context *ioc)
{
        if (!ioc || ioc_batching(q, ioc))
                return;

        ioc->nr_batch_requests = q->nr_batching;
        ioc->last_waited = jiffies;
}

static void __freed_request(struct request_list *rl, int sync)
{
        struct request_queue *q = rl->q;

        if (rl->count[sync] < queue_congestion_off_threshold(q))
                blk_clear_congested(rl, sync);

        if (rl->count[sync] + 1 <= q->nr_requests) {
                if (waitqueue_active(&rl->wait[sync]))
                        wake_up(&rl->wait[sync]);

                blk_clear_rl_full(rl, sync);
        }
}

/*
 * A request has just been released.  Account for it, update the full and
 * congestion status, wake up any waiters.   Called under q->queue_lock.
 */
static void freed_request(struct request_list *rl, bool sync,
                req_flags_t rq_flags)
{
        struct request_queue *q = rl->q;

        q->nr_rqs[sync]--;
        rl->count[sync]--;
        if (rq_flags & RQF_ELVPRIV)
                q->nr_rqs_elvpriv--;

        __freed_request(rl, sync);

        if (unlikely(rl->starved[sync ^ 1]))
                __freed_request(rl, sync ^ 1);
}

int blk_update_nr_requests(struct request_queue *q, unsigned int nr)
{
        struct request_list *rl;
        int on_thresh, off_thresh;

        WARN_ON_ONCE(q->mq_ops);

        spin_lock_irq(q->queue_lock);
        q->nr_requests = nr;
        blk_queue_congestion_threshold(q);
        on_thresh = queue_congestion_on_threshold(q);
        off_thresh = queue_congestion_off_threshold(q);

        blk_queue_for_each_rl(rl, q) {
                if (rl->count[BLK_RW_SYNC] >= on_thresh)
                        blk_set_congested(rl, BLK_RW_SYNC);
                else if (rl->count[BLK_RW_SYNC] < off_thresh)
                        blk_clear_congested(rl, BLK_RW_SYNC);

                if (rl->count[BLK_RW_ASYNC] >= on_thresh)
                        blk_set_congested(rl, BLK_RW_ASYNC);
                else if (rl->count[BLK_RW_ASYNC] < off_thresh)
                        blk_clear_congested(rl, BLK_RW_ASYNC);

                if (rl->count[BLK_RW_SYNC] >= q->nr_requests) {
                        blk_set_rl_full(rl, BLK_RW_SYNC);
                } else {
                        blk_clear_rl_full(rl, BLK_RW_SYNC);
                        wake_up(&rl->wait[BLK_RW_SYNC]);
                }

                if (rl->count[BLK_RW_ASYNC] >= q->nr_requests) {
                        blk_set_rl_full(rl, BLK_RW_ASYNC);
                } else {
                        blk_clear_rl_full(rl, BLK_RW_ASYNC);
                        wake_up(&rl->wait[BLK_RW_ASYNC]);
                }
        }

        spin_unlock_irq(q->queue_lock);
        return 0;
}

/**
 * __get_request - get a free request
 * @rl: request list to allocate from
 * @op: operation and flags
 * @bio: bio to allocate request for (can be %NULL)
 * @gfp_mask: allocation mask
 *
 * Get a free request from @q.  This function may fail under memory
 * pressure or if @q is dead.
 *
 * Must be called with @q->queue_lock held and,
 * Returns ERR_PTR on failure, with @q->queue_lock held.
 * Returns request pointer on success, with @q->queue_lock *not held*.
 */
static struct request *__get_request(struct request_list *rl, unsigned int op,
                struct bio *bio, gfp_t gfp_mask)
{
        struct request_queue *q = rl->q;
        struct request *rq;
        struct elevator_type *et = q->elevator->type;
        struct io_context *ioc = rq_ioc(bio);
        struct io_cq *icq = NULL;
        const bool is_sync = op_is_sync(op);
        int may_queue;
        req_flags_t rq_flags = RQF_ALLOCED;

        lockdep_assert_held(q->queue_lock);

        if (unlikely(blk_queue_dying(q)))
                return ERR_PTR(-ENODEV);

        may_queue = elv_may_queue(q, op);
        if (may_queue == ELV_MQUEUE_NO)
                goto rq_starved;

        if (rl->count[is_sync]+1 >= queue_congestion_on_threshold(q)) {
                if (rl->count[is_sync]+1 >= q->nr_requests) {
                        /*
                         * The queue will fill after this allocation, so set
                         * it as full, and mark this process as "batching".
                         * This process will be allowed to complete a batch of
                         * requests, others will be blocked.
                         */
                        if (!blk_rl_full(rl, is_sync)) {
                                ioc_set_batching(q, ioc);
                                blk_set_rl_full(rl, is_sync);
                        } else {
                                if (may_queue != ELV_MQUEUE_MUST
                                                && !ioc_batching(q, ioc)) {
                                        /*
                                         * The queue is full and the allocating
                                         * process is not a "batcher", and not
                                         * exempted by the IO scheduler
                                         */
                                        return ERR_PTR(-ENOMEM);
                                }
                        }
                }
                blk_set_congested(rl, is_sync);
        }

        /*
         * Only allow batching queuers to allocate up to 50% over the defined
         * limit of requests, otherwise we could have thousands of requests
         * allocated with any setting of ->nr_requests
         */
        if (rl->count[is_sync] >= (3 * q->nr_requests / 2))
                return ERR_PTR(-ENOMEM);

        q->nr_rqs[is_sync]++;
        rl->count[is_sync]++;
        rl->starved[is_sync] = 0;

        /*
         * Decide whether the new request will be managed by elevator.  If
         * so, mark @rq_flags and increment elvpriv.  Non-zero elvpriv will
         * prevent the current elevator from being destroyed until the new
         * request is freed.  This guarantees icq's won't be destroyed and
         * makes creating new ones safe.
         *
         * Flush requests do not use the elevator so skip initialization.
         * This allows a request to share the flush and elevator data.
         *
         * Also, lookup icq while holding queue_lock.  If it doesn't exist,
         * it will be created after releasing queue_lock.
         */
        if (!op_is_flush(op) && !blk_queue_bypass(q)) {
                rq_flags |= RQF_ELVPRIV;
                q->nr_rqs_elvpriv++;
                if (et->icq_cache && ioc)
                        icq = ioc_lookup_icq(ioc, q);
        }

        if (blk_queue_io_stat(q))
                rq_flags |= RQF_IO_STAT;
        spin_unlock_irq(q->queue_lock);

        /* allocate and init request */
        rq = mempool_alloc(rl->rq_pool, gfp_mask);
        if (!rq)
                goto fail_alloc;

        blk_rq_init(q, rq);
        blk_rq_set_rl(rq, rl);
        rq->cmd_flags = op;
        rq->rq_flags = rq_flags;

        /* init elvpriv */
        if (rq_flags & RQF_ELVPRIV) {
                if (unlikely(et->icq_cache && !icq)) {
                        if (ioc)
                                icq = ioc_create_icq(ioc, q, gfp_mask);
                        if (!icq)
                                goto fail_elvpriv;
                }

                rq->elv.icq = icq;
                if (unlikely(elv_set_request(q, rq, bio, gfp_mask)))
                        goto fail_elvpriv;

                /* @rq->elv.icq holds io_context until @rq is freed */
                if (icq)
                        get_io_context(icq->ioc);
        }
out:
        /*
         * ioc may be NULL here, and ioc_batching will be false. That's
         * OK, if the queue is under the request limit then requests need
         * not count toward the nr_batch_requests limit. There will always
         * be some limit enforced by BLK_BATCH_TIME.
         */
        if (ioc_batching(q, ioc))
                ioc->nr_batch_requests--;

        trace_block_getrq(q, bio, op);
        return rq;

fail_elvpriv:
        /*
         * elvpriv init failed.  ioc, icq and elvpriv aren't mempool backed
         * and may fail indefinitely under memory pressure and thus
         * shouldn't stall IO.  Treat this request as !elvpriv.  This will
         * disturb iosched and blkcg but weird is bettern than dead.
         */
        printk_ratelimited(KERN_WARNING "%s: dev %s: request aux data allocation failed, iosched may be disturbed\n",
                           __func__, dev_name(q->backing_dev_info->dev));

        rq->rq_flags &= ~RQF_ELVPRIV;
        rq->elv.icq = NULL;

        spin_lock_irq(q->queue_lock);
        q->nr_rqs_elvpriv--;
        spin_unlock_irq(q->queue_lock);
        goto out;

fail_alloc:
        /*
         * Allocation failed presumably due to memory. Undo anything we
         * might have messed up.
         *
         * Allocating task should really be put onto the front of the wait
         * queue, but this is pretty rare.
         */
        spin_lock_irq(q->queue_lock);
        freed_request(rl, is_sync, rq_flags);

        /*
         * in the very unlikely event that allocation failed and no
         * requests for this direction was pending, mark us starved so that
         * freeing of a request in the other direction will notice
         * us. another possible fix would be to split the rq mempool into
         * READ and WRITE
         */
rq_starved:
        if (unlikely(rl->count[is_sync] == 0))
                rl->starved[is_sync] = 1;
        return ERR_PTR(-ENOMEM);
}

/**
 * get_request - get a free request
 * @q: request_queue to allocate request from
 * @op: operation and flags
 * @bio: bio to allocate request for (can be %NULL)
 * @gfp_mask: allocation mask
 *
 * Get a free request from @q.  If %__GFP_DIRECT_RECLAIM is set in @gfp_mask,
 * this function keeps retrying under memory pressure and fails iff @q is dead.
 *
 * Must be called with @q->queue_lock held and,
 * Returns ERR_PTR on failure, with @q->queue_lock held.
 * Returns request pointer on success, with @q->queue_lock *not held*.
 */
static struct request *get_request(struct request_queue *q, unsigned int op,
                struct bio *bio, gfp_t gfp_mask)
{
        const bool is_sync = op_is_sync(op);
        DEFINE_WAIT(wait);
        struct request_list *rl;
        struct request *rq;

        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        rl = blk_get_rl(q, bio);        /* transferred to @rq on success */
retry:
        rq = __get_request(rl, op, bio, gfp_mask);
        if (!IS_ERR(rq))
                return rq;

        if (op & REQ_NOWAIT) {
                blk_put_rl(rl);
                return ERR_PTR(-EAGAIN);
        }

        if (!gfpflags_allow_blocking(gfp_mask) || unlikely(blk_queue_dying(q))) {
                blk_put_rl(rl);
                return rq;
        }

        /* wait on @rl and retry */
        prepare_to_wait_exclusive(&rl->wait[is_sync], &wait,
                                  TASK_UNINTERRUPTIBLE);

        trace_block_sleeprq(q, bio, op);

        spin_unlock_irq(q->queue_lock);
        io_schedule();

        /*
         * After sleeping, we become a "batching" process and will be able
         * to allocate at least one request, and up to a big batch of them
         * for a small period time.  See ioc_batching, ioc_set_batching
         */
        ioc_set_batching(q, current->io_context);

        spin_lock_irq(q->queue_lock);
        finish_wait(&rl->wait[is_sync], &wait);

        goto retry;
}

static struct request *blk_old_get_request(struct request_queue *q,
                                           unsigned int op, gfp_t gfp_mask)
{
        struct request *rq;

        WARN_ON_ONCE(q->mq_ops);

        /* create ioc upfront */
        create_io_context(gfp_mask, q->node);

        spin_lock_irq(q->queue_lock);
        rq = get_request(q, op, NULL, gfp_mask);
        if (IS_ERR(rq)) {
                spin_unlock_irq(q->queue_lock);
                return rq;
        }

        /* q->queue_lock is unlocked at this point */
        rq->__data_len = 0;
        rq->__sector = (sector_t) -1;
        rq->bio = rq->biotail = NULL;
        return rq;
}

struct request *blk_get_request(struct request_queue *q, unsigned int op,
                                gfp_t gfp_mask)
{
        struct request *req;

        if (q->mq_ops) {
                req = blk_mq_alloc_request(q, op,
                        (gfp_mask & __GFP_DIRECT_RECLAIM) ?
                                0 : BLK_MQ_REQ_NOWAIT);
                if (!IS_ERR(req) && q->mq_ops->initialize_rq_fn)
                        q->mq_ops->initialize_rq_fn(req);
        } else {
                req = blk_old_get_request(q, op, gfp_mask);
                if (!IS_ERR(req) && q->initialize_rq_fn)
                        q->initialize_rq_fn(req);
        }

        return req;
}
EXPORT_SYMBOL(blk_get_request);

/**
 * blk_requeue_request - put a request back on queue
 * @q:          request queue where request should be inserted
 * @rq:         request to be inserted
 *
 * Description:
 *    Drivers often keep queueing requests until the hardware cannot accept
 *    more, when that condition happens we need to put the request back
 *    on the queue. Must be called with queue lock held.
 */
void blk_requeue_request(struct request_queue *q, struct request *rq)
{
        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        blk_delete_timer(rq);
        blk_clear_rq_complete(rq);
        trace_block_rq_requeue(q, rq);
        wbt_requeue(q->rq_wb, &rq->issue_stat);

        if (rq->rq_flags & RQF_QUEUED)
                blk_queue_end_tag(q, rq);

        BUG_ON(blk_queued_rq(rq));

        elv_requeue_request(q, rq);
}
EXPORT_SYMBOL(blk_requeue_request);

static void add_acct_request(struct request_queue *q, struct request *rq,
                             int where)
{
        blk_account_io_start(rq, true);
        __elv_add_request(q, rq, where);
}

static void part_round_stats_single(int cpu, struct hd_struct *part,
                                    unsigned long now)
{
        int inflight;

        if (now == part->stamp)
                return;

        inflight = part_in_flight(part);
        if (inflight) {
                __part_stat_add(cpu, part, time_in_queue,
                                inflight * (now - part->stamp));
                __part_stat_add(cpu, part, io_ticks, (now - part->stamp));
        }
        part->stamp = now;
}

/**
 * part_round_stats() - Round off the performance stats on a struct disk_stats.
 * @cpu: cpu number for stats access
 * @part: target partition
 *
 * The average IO queue length and utilisation statistics are maintained
 * by observing the current state of the queue length and the amount of
 * time it has been in this state for.
 *
 * Normally, that accounting is done on IO completion, but that can result
 * in more than a second's worth of IO being accounted for within any one
 * second, leading to >100% utilisation.  To deal with that, we call this
 * function to do a round-off before returning the results when reading
 * /proc/diskstats.  This accounts immediately for all queue usage up to
 * the current jiffies and restarts the counters again.
 */
void part_round_stats(int cpu, struct hd_struct *part)
{
        unsigned long now = jiffies;

        if (part->partno)
                part_round_stats_single(cpu, &part_to_disk(part)->part0, now);
        part_round_stats_single(cpu, part, now);
}
EXPORT_SYMBOL_GPL(part_round_stats);

#ifdef CONFIG_PM
static void blk_pm_put_request(struct request *rq)
{
        if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending)
                pm_runtime_mark_last_busy(rq->q->dev);
}
#else
static inline void blk_pm_put_request(struct request *rq) {}
#endif

void __blk_put_request(struct request_queue *q, struct request *req)
{
        req_flags_t rq_flags = req->rq_flags;

        if (unlikely(!q))
                return;

        if (q->mq_ops) {
                blk_mq_free_request(req);
                return;
        }

        lockdep_assert_held(q->queue_lock);

        blk_pm_put_request(req);

        elv_completed_request(q, req);

        /* this is a bio leak */
        WARN_ON(req->bio != NULL);

        wbt_done(q->rq_wb, &req->issue_stat);

        /*
         * Request may not have originated from ll_rw_blk. if not,
         * it didn't come out of our reserved rq pools
         */
        if (rq_flags & RQF_ALLOCED) {
                struct request_list *rl = blk_rq_rl(req);
                bool sync = op_is_sync(req->cmd_flags);

                BUG_ON(!list_empty(&req->queuelist));
                BUG_ON(ELV_ON_HASH(req));

                blk_free_request(rl, req);
                freed_request(rl, sync, rq_flags);
                blk_put_rl(rl);
        }
}
EXPORT_SYMBOL_GPL(__blk_put_request);

void blk_put_request(struct request *req)
{
        struct request_queue *q = req->q;

        if (q->mq_ops)
                blk_mq_free_request(req);
        else {
                unsigned long flags;

                spin_lock_irqsave(q->queue_lock, flags);
                __blk_put_request(q, req);
                spin_unlock_irqrestore(q->queue_lock, flags);
        }
}
EXPORT_SYMBOL(blk_put_request);

bool bio_attempt_back_merge(struct request_queue *q, struct request *req,
                            struct bio *bio)
{
        const int ff = bio->bi_opf & REQ_FAILFAST_MASK;

        if (!ll_back_merge_fn(q, req, bio))
                return false;

        trace_block_bio_backmerge(q, req, bio);

        if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
                blk_rq_set_mixed_merge(req);

        req->biotail->bi_next = bio;
        req->biotail = bio;
        req->__data_len += bio->bi_iter.bi_size;
        req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));

        blk_account_io_start(req, false);
        return true;
}

bool bio_attempt_front_merge(struct request_queue *q, struct request *req,
                             struct bio *bio)
{
        const int ff = bio->bi_opf & REQ_FAILFAST_MASK;

        if (!ll_front_merge_fn(q, req, bio))
                return false;

        trace_block_bio_frontmerge(q, req, bio);

        if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
                blk_rq_set_mixed_merge(req);

        bio->bi_next = req->bio;
        req->bio = bio;

        req->__sector = bio->bi_iter.bi_sector;
        req->__data_len += bio->bi_iter.bi_size;
        req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));

        blk_account_io_start(req, false);
        return true;
}

bool bio_attempt_discard_merge(struct request_queue *q, struct request *req,
                struct bio *bio)
{
        unsigned short segments = blk_rq_nr_discard_segments(req);

        if (segments >= queue_max_discard_segments(q))
                goto no_merge;
        if (blk_rq_sectors(req) + bio_sectors(bio) >
            blk_rq_get_max_sectors(req, blk_rq_pos(req)))
                goto no_merge;

        req->biotail->bi_next = bio;
        req->biotail = bio;
        req->__data_len += bio->bi_iter.bi_size;
        req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
        req->nr_phys_segments = segments + 1;

        blk_account_io_start(req, false);
        return true;
no_merge:
        req_set_nomerge(q, req);
        return false;
}

/**
 * blk_attempt_plug_merge - try to merge with %current's plugged list
 * @q: request_queue new bio is being queued at
 * @bio: new bio being queued
 * @request_count: out parameter for number of traversed plugged requests
 * @same_queue_rq: pointer to &struct request that gets filled in when
 * another request associated with @q is found on the plug list
 * (optional, may be %NULL)
 *
 * Determine whether @bio being queued on @q can be merged with a request
 * on %current's plugged list.  Returns %true if merge was successful,
 * otherwise %false.
 *
 * Plugging coalesces IOs from the same issuer for the same purpose without
 * going through @q->queue_lock.  As such it's more of an issuing mechanism
 * than scheduling, and the request, while may have elvpriv data, is not
 * added on the elevator at this point.  In addition, we don't have
 * reliable access to the elevator outside queue lock.  Only check basic
 * merging parameters without querying the elevator.
 *
 * Caller must ensure !blk_queue_nomerges(q) beforehand.
 */
bool blk_attempt_plug_merge(struct request_queue *q, struct bio *bio,
                            unsigned int *request_count,
                            struct request **same_queue_rq)
{
        struct blk_plug *plug;
        struct request *rq;
        struct list_head *plug_list;

        plug = current->plug;
        if (!plug)
                return false;
        *request_count = 0;

        if (q->mq_ops)
                plug_list = &plug->mq_list;
        else
                plug_list = &plug->list;

        list_for_each_entry_reverse(rq, plug_list, queuelist) {
                bool merged = false;

                if (rq->q == q) {
                        (*request_count)++;
                        /*
                         * Only blk-mq multiple hardware queues case checks the
                         * rq in the same queue, there should be only one such
                         * rq in a queue
                         **/
                        if (same_queue_rq)
                                *same_queue_rq = rq;
                }

                if (rq->q != q || !blk_rq_merge_ok(rq, bio))
                        continue;

                switch (blk_try_merge(rq, bio)) {
                case ELEVATOR_BACK_MERGE:
                        merged = bio_attempt_back_merge(q, rq, bio);
                        break;
                case ELEVATOR_FRONT_MERGE:
                        merged = bio_attempt_front_merge(q, rq, bio);
                        break;
                case ELEVATOR_DISCARD_MERGE:
                        merged = bio_attempt_discard_merge(q, rq, bio);
                        break;
                default:
                        break;
                }

                if (merged)
                        return true;
        }

        return false;
}

unsigned int blk_plug_queued_count(struct request_queue *q)
{
        struct blk_plug *plug;
        struct request *rq;
        struct list_head *plug_list;
        unsigned int ret = 0;

        plug = current->plug;
        if (!plug)
                goto out;

        if (q->mq_ops)
                plug_list = &plug->mq_list;
        else
                plug_list = &plug->list;

        list_for_each_entry(rq, plug_list, queuelist) {
                if (rq->q == q)
                        ret++;
        }
out:
        return ret;
}

void blk_init_request_from_bio(struct request *req, struct bio *bio)
{
        struct io_context *ioc = rq_ioc(bio);

        if (bio->bi_opf & REQ_RAHEAD)
                req->cmd_flags |= REQ_FAILFAST_MASK;

        req->__sector = bio->bi_iter.bi_sector;
        if (ioprio_valid(bio_prio(bio)))
                req->ioprio = bio_prio(bio);
        else if (ioc)
                req->ioprio = ioc->ioprio;
        else
                req->ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_NONE, 0);
        req->write_hint = bio->bi_write_hint;
        blk_rq_bio_prep(req->q, req, bio);
}
EXPORT_SYMBOL_GPL(blk_init_request_from_bio);

static blk_qc_t blk_queue_bio(struct request_queue *q, struct bio *bio)
{
        struct blk_plug *plug;
        int where = ELEVATOR_INSERT_SORT;
        struct request *req, *free;
        unsigned int request_count = 0;
        unsigned int wb_acct;

        /*
         * low level driver can indicate that it wants pages above a
         * certain limit bounced to low memory (ie for highmem, or even
         * ISA dma in theory)
         */
        blk_queue_bounce(q, &bio);

        blk_queue_split(q, &bio);

        if (!bio_integrity_prep(bio))
                return BLK_QC_T_NONE;

        if (op_is_flush(bio->bi_opf)) {
                spin_lock_irq(q->queue_lock);
                where = ELEVATOR_INSERT_FLUSH;
                goto get_rq;
        }

        /*
         * Check if we can merge with the plugged list before grabbing
         * any locks.
         */
        if (!blk_queue_nomerges(q)) {
                if (blk_attempt_plug_merge(q, bio, &request_count, NULL))
                        return BLK_QC_T_NONE;
        } else
                request_count = blk_plug_queued_count(q);

        spin_lock_irq(q->queue_lock);

        switch (elv_merge(q, &req, bio)) {
        case ELEVATOR_BACK_MERGE:
                if (!bio_attempt_back_merge(q, req, bio))
                        break;
                elv_bio_merged(q, req, bio);
                free = attempt_back_merge(q, req);
                if (free)
                        __blk_put_request(q, free);
                else
                        elv_merged_request(q, req, ELEVATOR_BACK_MERGE);
                goto out_unlock;
        case ELEVATOR_FRONT_MERGE:
                if (!bio_attempt_front_merge(q, req, bio))
                        break;
                elv_bio_merged(q, req, bio);
                free = attempt_front_merge(q, req);
                if (free)
                        __blk_put_request(q, free);
                else
                        elv_merged_request(q, req, ELEVATOR_FRONT_MERGE);
                goto out_unlock;
        default:
                break;
        }

get_rq:
        wb_acct = wbt_wait(q->rq_wb, bio, q->queue_lock);

        /*
         * Grab a free request. This is might sleep but can not fail.
         * Returns with the queue unlocked.
         */
        req = get_request(q, bio->bi_opf, bio, GFP_NOIO);
        if (IS_ERR(req)) {
                __wbt_done(q->rq_wb, wb_acct);
                if (PTR_ERR(req) == -ENOMEM)
                        bio->bi_status = BLK_STS_RESOURCE;
                else
                        bio->bi_status = BLK_STS_IOERR;
                bio_endio(bio);
                goto out_unlock;
        }

        wbt_track(&req->issue_stat, wb_acct);

        /*
         * After dropping the lock and possibly sleeping here, our request
         * may now be mergeable after it had proven unmergeable (above).
         * We don't worry about that case for efficiency. It won't happen
         * often, and the elevators are able to handle it.
         */
        blk_init_request_from_bio(req, bio);

        if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags))
                req->cpu = raw_smp_processor_id();

        plug = current->plug;
        if (plug) {
                /*
                 * If this is the first request added after a plug, fire
                 * of a plug trace.
                 *
                 * @request_count may become stale because of schedule
                 * out, so check plug list again.
                 */
                if (!request_count || list_empty(&plug->list))
                        trace_block_plug(q);
                else {
                        struct request *last = list_entry_rq(plug->list.prev);
                        if (request_count >= BLK_MAX_REQUEST_COUNT ||
                            blk_rq_bytes(last) >= BLK_PLUG_FLUSH_SIZE) {
                                blk_flush_plug_list(plug, false);
                                trace_block_plug(q);
                        }
                }
                list_add_tail(&req->queuelist, &plug->list);
                blk_account_io_start(req, true);
        } else {
                spin_lock_irq(q->queue_lock);
                add_acct_request(q, req, where);
                __blk_run_queue(q);
out_unlock:
                spin_unlock_irq(q->queue_lock);
        }

        return BLK_QC_T_NONE;
}

/*
 * If bio->bi_dev is a partition, remap the location
 */
static inline void blk_partition_remap(struct bio *bio)
{
        struct block_device *bdev = bio->bi_bdev;

        /*
         * Zone reset does not include bi_size so bio_sectors() is always 0.
         * Include a test for the reset op code and perform the remap if needed.
         */
        if (bdev != bdev->bd_contains &&
            (bio_sectors(bio) || bio_op(bio) == REQ_OP_ZONE_RESET)) {
                struct hd_struct *p = bdev->bd_part;

                bio->bi_iter.bi_sector += p->start_sect;
                bio->bi_bdev = bdev->bd_contains;

                trace_block_bio_remap(bdev_get_queue(bio->bi_bdev), bio,
                                      bdev->bd_dev,
                                      bio->bi_iter.bi_sector - p->start_sect);
        }
}

static void handle_bad_sector(struct bio *bio)
{
        char b[BDEVNAME_SIZE];

        printk(KERN_INFO "attempt to access beyond end of device\n");
        printk(KERN_INFO "%s: rw=%d, want=%Lu, limit=%Lu\n",
                        bdevname(bio->bi_bdev, b),
                        bio->bi_opf,
                        (unsigned long long)bio_end_sector(bio),
                        (long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
}

#ifdef CONFIG_FAIL_MAKE_REQUEST

static DECLARE_FAULT_ATTR(fail_make_request);

static int __init setup_fail_make_request(char *str)
{
        return setup_fault_attr(&fail_make_request, str);
}
__setup("fail_make_request=", setup_fail_make_request);

static bool should_fail_request(struct hd_struct *part, unsigned int bytes)
{
        return part->make_it_fail && should_fail(&fail_make_request, bytes);
}

static int __init fail_make_request_debugfs(void)
{
        struct dentry *dir = fault_create_debugfs_attr("fail_make_request",
                                                NULL, &fail_make_request);

        return PTR_ERR_OR_ZERO(dir);
}

late_initcall(fail_make_request_debugfs);

#else /* CONFIG_FAIL_MAKE_REQUEST */

static inline bool should_fail_request(struct hd_struct *part,
                                        unsigned int bytes)
{
        return false;
}

#endif /* CONFIG_FAIL_MAKE_REQUEST */

/*
 * Check whether this bio extends beyond the end of the device.
 */
static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
{
        sector_t maxsector;

        if (!nr_sectors)
                return 0;

        /* Test device or partition size, when known. */
        maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
        if (maxsector) {
                sector_t sector = bio->bi_iter.bi_sector;

                if (maxsector < nr_sectors || maxsector - nr_sectors < sector) {
                        /*
                         * This may well happen - the kernel calls bread()
                         * without checking the size of the device, e.g., when
                         * mounting a device.
                         */
                        handle_bad_sector(bio);
                        return 1;
                }
        }

        return 0;
}

static noinline_for_stack bool
generic_make_request_checks(struct bio *bio)
{
        struct request_queue *q;
        int nr_sectors = bio_sectors(bio);
        blk_status_t status = BLK_STS_IOERR;
        char b[BDEVNAME_SIZE];
        struct hd_struct *part;

        might_sleep();

        if (bio_check_eod(bio, nr_sectors))
                goto end_io;

        q = bdev_get_queue(bio->bi_bdev);
        if (unlikely(!q)) {
                printk(KERN_ERR
                       "generic_make_request: Trying to access "
                        "nonexistent block-device %s (%Lu)\n",
                        bdevname(bio->bi_bdev, b),
                        (long long) bio->bi_iter.bi_sector);
                goto end_io;
        }

        /*
         * For a REQ_NOWAIT based request, return -EOPNOTSUPP
         * if queue is not a request based queue.
         */

        if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_rq_based(q))
                goto not_supported;

        part = bio->bi_bdev->bd_part;
        if (should_fail_request(part, bio->bi_iter.bi_size) ||
            should_fail_request(&part_to_disk(part)->part0,
                                bio->bi_iter.bi_size))
                goto end_io;

        /*
         * If this device has partitions, remap block n
         * of partition p to block n+start(p) of the disk.
         */
        blk_partition_remap(bio);

        if (bio_check_eod(bio, nr_sectors))
                goto end_io;

        /*
         * Filter flush bio's early so that make_request based
         * drivers without flush support don't have to worry
         * about them.
         */
        if (op_is_flush(bio->bi_opf) &&
            !test_bit(QUEUE_FLAG_WC, &q->queue_flags)) {
                bio->bi_opf &= ~(REQ_PREFLUSH | REQ_FUA);
                if (!nr_sectors) {
                        status = BLK_STS_OK;
                        goto end_io;
                }
        }

        switch (bio_op(bio)) {
        case REQ_OP_DISCARD:
                if (!blk_queue_discard(q))
                        goto not_supported;
                break;
        case REQ_OP_SECURE_ERASE:
                if (!blk_queue_secure_erase(q))
                        goto not_supported;
                break;
        case REQ_OP_WRITE_SAME:
                if (!bdev_write_same(bio->bi_bdev))
                        goto not_supported;
                break;
        case REQ_OP_ZONE_REPORT:
        case REQ_OP_ZONE_RESET:
                if (!bdev_is_zoned(bio->bi_bdev))
                        goto not_supported;
                break;
        case REQ_OP_WRITE_ZEROES:
                if (!bdev_write_zeroes_sectors(bio->bi_bdev))
                        goto not_supported;
                break;
        default:
                break;
        }

        /*
         * Various block parts want %current->io_context and lazy ioc
         * allocation ends up trading a lot of pain for a small amount of
         * memory.  Just allocate it upfront.  This may fail and block
         * layer knows how to live with it.
         */
        create_io_context(GFP_ATOMIC, q->node);

        if (!blkcg_bio_issue_check(q, bio))
                return false;

        if (!bio_flagged(bio, BIO_TRACE_COMPLETION)) {
                trace_block_bio_queue(q, bio);
                /* Now that enqueuing has been traced, we need to trace
                 * completion as well.
                 */
                bio_set_flag(bio, BIO_TRACE_COMPLETION);
        }
        return true;

not_supported:
        status = BLK_STS_NOTSUPP;
end_io:
        bio->bi_status = status;
        bio_endio(bio);
        return false;
}

/**
 * generic_make_request - hand a buffer to its device driver for I/O
 * @bio:  The bio describing the location in memory and on the device.
 *
 * generic_make_request() is used to make I/O requests of block
 * devices. It is passed a &struct bio, which describes the I/O that needs
 * to be done.
 *
 * generic_make_request() does not return any status.  The
 * success/failure status of the request, along with notification of
 * completion, is delivered asynchronously through the bio->bi_end_io
 * function described (one day) else where.
 *
 * The caller of generic_make_request must make sure that bi_io_vec
 * are set to describe the memory buffer, and that bi_dev and bi_sector are
 * set to describe the device address, and the
 * bi_end_io and optionally bi_private are set to describe how
 * completion notification should be signaled.
 *
 * generic_make_request and the drivers it calls may use bi_next if this
 * bio happens to be merged with someone else, and may resubmit the bio to
 * a lower device by calling into generic_make_request recursively, which
 * means the bio should NOT be touched after the call to ->make_request_fn.
 */
blk_qc_t generic_make_request(struct bio *bio)
{
        /*
         * bio_list_on_stack[0] contains bios submitted by the current
         * make_request_fn.
         * bio_list_on_stack[1] contains bios that were submitted before
         * the current make_request_fn, but that haven't been processed
         * yet.
         */
        struct bio_list bio_list_on_stack[2];
        blk_qc_t ret = BLK_QC_T_NONE;

        if (!generic_make_request_checks(bio))
                goto out;

        /*
         * We only want one ->make_request_fn to be active at a time, else
         * stack usage with stacked devices could be a problem.  So use
         * current->bio_list to keep a list of requests submited by a
         * make_request_fn function.  current->bio_list is also used as a
         * flag to say if generic_make_request is currently active in this
         * task or not.  If it is NULL, then no make_request is active.  If
         * it is non-NULL, then a make_request is active, and new requests
         * should be added at the tail
         */
        if (current->bio_list) {
                bio_list_add(&current->bio_list[0], bio);
                goto out;
        }

        /* following loop may be a bit non-obvious, and so deserves some
         * explanation.
         * Before entering the loop, bio->bi_next is NULL (as all callers
         * ensure that) so we have a list with a single bio.
         * We pretend that we have just taken it off a longer list, so
         * we assign bio_list to a pointer to the bio_list_on_stack,
         * thus initialising the bio_list of new bios to be
         * added.  ->make_request() may indeed add some more bios
         * through a recursive call to generic_make_request.  If it
         * did, we find a non-NULL value in bio_list and re-enter the loop
         * from the top.  In this case we really did just take the bio
         * of the top of the list (no pretending) and so remove it from
         * bio_list, and call into ->make_request() again.
         */
        BUG_ON(bio->bi_next);
        bio_list_init(&bio_list_on_stack[0]);
        current->bio_list = bio_list_on_stack;
        do {
                struct request_queue *q = bdev_get_queue(bio->bi_bdev);

                if (likely(blk_queue_enter(q, bio->bi_opf & REQ_NOWAIT) == 0)) {
                        struct bio_list lower, same;

                        /* Create a fresh bio_list for all subordinate requests */
                        bio_list_on_stack[1] = bio_list_on_stack[0];
                        bio_list_init(&bio_list_on_stack[0]);
                        ret = q->make_request_fn(q, bio);

                        blk_queue_exit(q);

                        /* sort new bios into those for a lower level
                         * and those for the same level
                         */
                        bio_list_init(&lower);
                        bio_list_init(&same);
                        while ((bio = bio_list_pop(&bio_list_on_stack[0])) != NULL)
                                if (q == bdev_get_queue(bio->bi_bdev))
                                        bio_list_add(&same, bio);
                                else
                                        bio_list_add(&lower, bio);
                        /* now assemble so we handle the lowest level first */
                        bio_list_merge(&bio_list_on_stack[0], &lower);
                        bio_list_merge(&bio_list_on_stack[0], &same);
                        bio_list_merge(&bio_list_on_stack[0], &bio_list_on_stack[1]);
                } else {
                        if (unlikely(!blk_queue_dying(q) &&
                                        (bio->bi_opf & REQ_NOWAIT)))
                                bio_wouldblock_error(bio);
                        else
                                bio_io_error(bio);
                }
                bio = bio_list_pop(&bio_list_on_stack[0]);
        } while (bio);
        current->bio_list = NULL; /* deactivate */

out:
        return ret;
}
EXPORT_SYMBOL(generic_make_request);

/**
 * submit_bio - submit a bio to the block device layer for I/O
 * @bio: The &struct bio which describes the I/O
 *
 * submit_bio() is very similar in purpose to generic_make_request(), and
 * uses that function to do most of the work. Both are fairly rough
 * interfaces; @bio must be presetup and ready for I/O.
 *
 */
blk_qc_t submit_bio(struct bio *bio)
{
        /*
         * If it's a regular read/write or a barrier with data attached,
         * go through the normal accounting stuff before submission.
         */
        if (bio_has_data(bio)) {
                unsigned int count;

                if (unlikely(bio_op(bio) == REQ_OP_WRITE_SAME))
                        count = bdev_logical_block_size(bio->bi_bdev) >> 9;
                else
                        count = bio_sectors(bio);

                if (op_is_write(bio_op(bio))) {
                        count_vm_events(PGPGOUT, count);
                } else {
                        task_io_account_read(bio->bi_iter.bi_size);
                        count_vm_events(PGPGIN, count);
                }

                if (unlikely(block_dump)) {
                        char b[BDEVNAME_SIZE];
                        printk(KERN_DEBUG "%s(%d): %s block %Lu on %s (%u sectors)\n",
                        current->comm, task_pid_nr(current),
                                op_is_write(bio_op(bio)) ? "WRITE" : "READ",
                                (unsigned long long)bio->bi_iter.bi_sector,
                                bdevname(bio->bi_bdev, b),
                                count);
                }
        }

        return generic_make_request(bio);
}
EXPORT_SYMBOL(submit_bio);

/**
 * blk_cloned_rq_check_limits - Helper function to check a cloned request
 *                              for new the queue limits
 * @q:  the queue
 * @rq: the request being checked
 *
 * Description:
 *    @rq may have been made based on weaker limitations of upper-level queues
 *    in request stacking drivers, and it may violate the limitation of @q.
 *    Since the block layer and the underlying device driver trust @rq
 *    after it is inserted to @q, it should be checked against @q before
 *    the insertion using this generic function.
 *
 *    Request stacking drivers like request-based dm may change the queue
 *    limits when retrying requests on other queues. Those requests need
 *    to be checked against the new queue limits again during dispatch.
 */
static int blk_cloned_rq_check_limits(struct request_queue *q,
                                      struct request *rq)
{
        if (blk_rq_sectors(rq) > blk_queue_get_max_sectors(q, req_op(rq))) {
                printk(KERN_ERR "%s: over max size limit.\n", __func__);
                return -EIO;
        }

        /*
         * queue's settings related to segment counting like q->bounce_pfn
         * may differ from that of other stacking queues.
         * Recalculate it to check the request correctly on this queue's
         * limitation.
         */
        blk_recalc_rq_segments(rq);
        if (rq->nr_phys_segments > queue_max_segments(q)) {
                printk(KERN_ERR "%s: over max segments limit.\n", __func__);
                return -EIO;
        }

        return 0;
}

/**
 * blk_insert_cloned_request - Helper for stacking drivers to submit a request
 * @q:  the queue to submit the request
 * @rq: the request being queued
 */
blk_status_t blk_insert_cloned_request(struct request_queue *q, struct request *rq)
{
        unsigned long flags;
        int where = ELEVATOR_INSERT_BACK;

        if (blk_cloned_rq_check_limits(q, rq))
                return BLK_STS_IOERR;

        if (rq->rq_disk &&
            should_fail_request(&rq->rq_disk->part0, blk_rq_bytes(rq)))
                return BLK_STS_IOERR;

        if (q->mq_ops) {
                if (blk_queue_io_stat(q))
                        blk_account_io_start(rq, true);
                blk_mq_sched_insert_request(rq, false, true, false, false);
                return BLK_STS_OK;
        }

        spin_lock_irqsave(q->queue_lock, flags);
        if (unlikely(blk_queue_dying(q))) {
                spin_unlock_irqrestore(q->queue_lock, flags);
                return BLK_STS_IOERR;
        }

        /*
         * Submitting request must be dequeued before calling this function
         * because it will be linked to another request_queue
         */
        BUG_ON(blk_queued_rq(rq));

        if (op_is_flush(rq->cmd_flags))
                where = ELEVATOR_INSERT_FLUSH;

        add_acct_request(q, rq, where);
        if (where == ELEVATOR_INSERT_FLUSH)
                __blk_run_queue(q);
        spin_unlock_irqrestore(q->queue_lock, flags);

        return BLK_STS_OK;
}
EXPORT_SYMBOL_GPL(blk_insert_cloned_request);

/**
 * blk_rq_err_bytes - determine number of bytes till the next failure boundary
 * @rq: request to examine
 *
 * Description:
 *     A request could be merge of IOs which require different failure
 *     handling.  This function determines the number of bytes which
 *     can be failed from the beginning of the request without
 *     crossing into area which need to be retried further.
 *
 * Return:
 *     The number of bytes to fail.
 */
unsigned int blk_rq_err_bytes(const struct request *rq)
{
        unsigned int ff = rq->cmd_flags & REQ_FAILFAST_MASK;
        unsigned int bytes = 0;
        struct bio *bio;

        if (!(rq->rq_flags & RQF_MIXED_MERGE))
                return blk_rq_bytes(rq);

        /*
         * Currently the only 'mixing' which can happen is between
         * different fastfail types.  We can safely fail portions
         * which have all the failfast bits that the first one has -
         * the ones which are at least as eager to fail as the first
         * one.
         */
        for (bio = rq->bio; bio; bio = bio->bi_next) {
                if ((bio->bi_opf & ff) != ff)
                        break;
                bytes += bio->bi_iter.bi_size;
        }

        /* this could lead to infinite loop */
        BUG_ON(blk_rq_bytes(rq) && !bytes);
        return bytes;
}
EXPORT_SYMBOL_GPL(blk_rq_err_bytes);

void blk_account_io_completion(struct request *req, unsigned int bytes)
{
        if (blk_do_io_stat(req)) {
                const int rw = rq_data_dir(req);
                struct hd_struct *part;
                int cpu;

                cpu = part_stat_lock();
                part = req->part;
                part_stat_add(cpu, part, sectors[rw], bytes >> 9);
                part_stat_unlock();
        }
}

void blk_account_io_done(struct request *req)
{
        /*
         * Account IO completion.  flush_rq isn't accounted as a
         * normal IO on queueing nor completion.  Accounting the
         * containing request is enough.
         */
        if (blk_do_io_stat(req) && !(req->rq_flags & RQF_FLUSH_SEQ)) {
                unsigned long duration = jiffies - req->start_time;
                const int rw = rq_data_dir(req);
                struct hd_struct *part;
                int cpu;

                cpu = part_stat_lock();
                part = req->part;

                part_stat_inc(cpu, part, ios[rw]);
                part_stat_add(cpu, part, ticks[rw], duration);
                part_round_stats(cpu, part);
                part_dec_in_flight(part, rw);

                hd_struct_put(part);
                part_stat_unlock();
        }
}

#ifdef CONFIG_PM
/*
 * Don't process normal requests when queue is suspended
 * or in the process of suspending/resuming
 */
static struct request *blk_pm_peek_request(struct request_queue *q,
                                           struct request *rq)
{
        if (q->dev && (q->rpm_status == RPM_SUSPENDED ||
            (q->rpm_status != RPM_ACTIVE && !(rq->rq_flags & RQF_PM))))
                return NULL;
        else
                return rq;
}
#else
static inline struct request *blk_pm_peek_request(struct request_queue *q,
                                                  struct request *rq)
{
        return rq;
}
#endif

void blk_account_io_start(struct request *rq, bool new_io)
{
        struct hd_struct *part;
        int rw = rq_data_dir(rq);
        int cpu;

        if (!blk_do_io_stat(rq))
                return;

        cpu = part_stat_lock();

        if (!new_io) {
                part = rq->part;
                part_stat_inc(cpu, part, merges[rw]);
        } else {
                part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
                if (!hd_struct_try_get(part)) {
                        /*
                         * The partition is already being removed,
                         * the request will be accounted on the disk only
                         *
                         * We take a reference on disk->part0 although that
                         * partition will never be deleted, so we can treat
                         * it as any other partition.
                         */
                        part = &rq->rq_disk->part0;
                        hd_struct_get(part);
                }
                part_round_stats(cpu, part);
                part_inc_in_flight(part, rw);
                rq->part = part;
        }

        part_stat_unlock();
}

/**
 * blk_peek_request - peek at the top of a request queue
 * @q: request queue to peek at
 *
 * Description:
 *     Return the request at the top of @q.  The returned request
 *     should be started using blk_start_request() before LLD starts
 *     processing it.
 *
 * Return:
 *     Pointer to the request at the top of @q if available.  Null
 *     otherwise.
 */
struct request *blk_peek_request(struct request_queue *q)
{
        struct request *rq;
        int ret;

        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        while ((rq = __elv_next_request(q)) != NULL) {

                rq = blk_pm_peek_request(q, rq);
                if (!rq)
                        break;

                if (!(rq->rq_flags & RQF_STARTED)) {
                        /*
                         * This is the first time the device driver
                         * sees this request (possibly after
                         * requeueing).  Notify IO scheduler.
                         */
                        if (rq->rq_flags & RQF_SORTED)
                                elv_activate_rq(q, rq);

                        /*
                         * just mark as started even if we don't start
                         * it, a request that has been delayed should
                         * not be passed by new incoming requests
                         */
                        rq->rq_flags |= RQF_STARTED;
                        trace_block_rq_issue(q, rq);
                }

                if (!q->boundary_rq || q->boundary_rq == rq) {
                        q->end_sector = rq_end_sector(rq);
                        q->boundary_rq = NULL;
                }

                if (rq->rq_flags & RQF_DONTPREP)
                        break;

                if (q->dma_drain_size && blk_rq_bytes(rq)) {
                        /*
                         * make sure space for the drain appears we
                         * know we can do this because max_hw_segments
                         * has been adjusted to be one fewer than the
                         * device can handle
                         */
                        rq->nr_phys_segments++;
                }

                if (!q->prep_rq_fn)
                        break;

                ret = q->prep_rq_fn(q, rq);
                if (ret == BLKPREP_OK) {
                        break;
                } else if (ret == BLKPREP_DEFER) {
                        /*
                         * the request may have been (partially) prepped.
                         * we need to keep this request in the front to
                         * avoid resource deadlock.  RQF_STARTED will
                         * prevent other fs requests from passing this one.
                         */
                        if (q->dma_drain_size && blk_rq_bytes(rq) &&
                            !(rq->rq_flags & RQF_DONTPREP)) {
                                /*
                                 * remove the space for the drain we added
                                 * so that we don't add it again
                                 */
                                --rq->nr_phys_segments;
                        }

                        rq = NULL;
                        break;
                } else if (ret == BLKPREP_KILL || ret == BLKPREP_INVALID) {
                        rq->rq_flags |= RQF_QUIET;
                        /*
                         * Mark this request as started so we don't trigger
                         * any debug logic in the end I/O path.
                         */
                        blk_start_request(rq);
                        __blk_end_request_all(rq, ret == BLKPREP_INVALID ?
                                        BLK_STS_TARGET : BLK_STS_IOERR);
                } else {
                        printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
                        break;
                }
        }

        return rq;
}
EXPORT_SYMBOL(blk_peek_request);

void blk_dequeue_request(struct request *rq)
{
        struct request_queue *q = rq->q;

        BUG_ON(list_empty(&rq->queuelist));
        BUG_ON(ELV_ON_HASH(rq));

        list_del_init(&rq->queuelist);

        /*
         * the time frame between a request being removed from the lists
         * and to it is freed is accounted as io that is in progress at
         * the driver side.
         */
        if (blk_account_rq(rq)) {
                q->in_flight[rq_is_sync(rq)]++;
                set_io_start_time_ns(rq);
        }
}

/**
 * blk_start_request - start request processing on the driver
 * @req: request to dequeue
 *
 * Description:
 *     Dequeue @req and start timeout timer on it.  This hands off the
 *     request to the driver.
 *
 *     Block internal functions which don't want to start timer should
 *     call blk_dequeue_request().
 */
void blk_start_request(struct request *req)
{
        lockdep_assert_held(req->q->queue_lock);
        WARN_ON_ONCE(req->q->mq_ops);

        blk_dequeue_request(req);

        if (test_bit(QUEUE_FLAG_STATS, &req->q->queue_flags)) {
                blk_stat_set_issue(&req->issue_stat, blk_rq_sectors(req));
                req->rq_flags |= RQF_STATS;
                wbt_issue(req->q->rq_wb, &req->issue_stat);
        }

        BUG_ON(test_bit(REQ_ATOM_COMPLETE, &req->atomic_flags));
        blk_add_timer(req);
}
EXPORT_SYMBOL(blk_start_request);

/**
 * blk_fetch_request - fetch a request from a request queue
 * @q: request queue to fetch a request from
 *
 * Description:
 *     Return the request at the top of @q.  The request is started on
 *     return and LLD can start processing it immediately.
 *
 * Return:
 *     Pointer to the request at the top of @q if available.  Null
 *     otherwise.
 */
struct request *blk_fetch_request(struct request_queue *q)
{
        struct request *rq;

        lockdep_assert_held(q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        rq = blk_peek_request(q);
        if (rq)
                blk_start_request(rq);
        return rq;
}
EXPORT_SYMBOL(blk_fetch_request);

/**
 * blk_update_request - Special helper function for request stacking drivers
 * @req:      the request being processed
 * @error:    block status code
 * @nr_bytes: number of bytes to complete @req
 *
 * Description:
 *     Ends I/O on a number of bytes attached to @req, but doesn't complete
 *     the request structure even if @req doesn't have leftover.
 *     If @req has leftover, sets it up for the next range of segments.
 *
 *     This special helper function is only for request stacking drivers
 *     (e.g. request-based dm) so that they can handle partial completion.
 *     Actual device drivers should use blk_end_request instead.
 *
 *     Passing the result of blk_rq_bytes() as @nr_bytes guarantees
 *     %false return from this function.
 *
 * Return:
 *     %false - this request doesn't have any more data
 *     %true  - this request has more data
 **/
bool blk_update_request(struct request *req, blk_status_t error,
                unsigned int nr_bytes)
{
        int total_bytes;

        trace_block_rq_complete(req, blk_status_to_errno(error), nr_bytes);

        if (!req->bio)
                return false;

        if (unlikely(error && !blk_rq_is_passthrough(req) &&
                     !(req->rq_flags & RQF_QUIET)))
                print_req_error(req, error);

        blk_account_io_completion(req, nr_bytes);

        total_bytes = 0;
        while (req->bio) {
                struct bio *bio = req->bio;
                unsigned bio_bytes = min(bio->bi_iter.bi_size, nr_bytes);

                if (bio_bytes == bio->bi_iter.bi_size)
                        req->bio = bio->bi_next;

                /* Completion has already been traced */
                bio_clear_flag(bio, BIO_TRACE_COMPLETION);
                req_bio_endio(req, bio, bio_bytes, error);

                total_bytes += bio_bytes;
                nr_bytes -= bio_bytes;

                if (!nr_bytes)
                        break;
        }

        /*
         * completely done
         */
        if (!req->bio) {
                /*
                 * Reset counters so that the request stacking driver
                 * can find how many bytes remain in the request
                 * later.
                 */
                req->__data_len = 0;
                return false;
        }

        req->__data_len -= total_bytes;

        /* update sector only for requests with clear definition of sector */
        if (!blk_rq_is_passthrough(req))
                req->__sector += total_bytes >> 9;

        /* mixed attributes always follow the first bio */
        if (req->rq_flags & RQF_MIXED_MERGE) {
                req->cmd_flags &= ~REQ_FAILFAST_MASK;
                req->cmd_flags |= req->bio->bi_opf & REQ_FAILFAST_MASK;
        }

        if (!(req->rq_flags & RQF_SPECIAL_PAYLOAD)) {
                /*
                 * If total number of sectors is less than the first segment
                 * size, something has gone terribly wrong.
                 */
                if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
                        blk_dump_rq_flags(req, "request botched");
                        req->__data_len = blk_rq_cur_bytes(req);
                }

                /* recalculate the number of segments */
                blk_recalc_rq_segments(req);
        }

        return true;
}
EXPORT_SYMBOL_GPL(blk_update_request);

static bool blk_update_bidi_request(struct request *rq, blk_status_t error,
                                    unsigned int nr_bytes,
                                    unsigned int bidi_bytes)
{
        if (blk_update_request(rq, error, nr_bytes))
                return true;

        /* Bidi request must be completed as a whole */
        if (unlikely(blk_bidi_rq(rq)) &&
            blk_update_request(rq->next_rq, error, bidi_bytes))
                return true;

        if (blk_queue_add_random(rq->q))
                add_disk_randomness(rq->rq_disk);

        return false;
}

/**
 * blk_unprep_request - unprepare a request
 * @req:        the request
 *
 * This function makes a request ready for complete resubmission (or
 * completion).  It happens only after all error handling is complete,
 * so represents the appropriate moment to deallocate any resources
 * that were allocated to the request in the prep_rq_fn.  The queue
 * lock is held when calling this.
 */
void blk_unprep_request(struct request *req)
{
        struct request_queue *q = req->q;

        req->rq_flags &= ~RQF_DONTPREP;
        if (q->unprep_rq_fn)
                q->unprep_rq_fn(q, req);
}
EXPORT_SYMBOL_GPL(blk_unprep_request);

void blk_finish_request(struct request *req, blk_status_t error)
{
        struct request_queue *q = req->q;

        lockdep_assert_held(req->q->queue_lock);
        WARN_ON_ONCE(q->mq_ops);

        if (req->rq_flags & RQF_STATS)
                blk_stat_add(req);

        if (req->rq_flags & RQF_QUEUED)
                blk_queue_end_tag(q, req);

        BUG_ON(blk_queued_rq(req));

        if (unlikely(laptop_mode) && !blk_rq_is_passthrough(req))
                laptop_io_completion(req->q->backing_dev_info);

        blk_delete_timer(req);

        if (req->rq_flags & RQF_DONTPREP)
                blk_unprep_request(req);

        blk_account_io_done(req);

        if (req->end_io) {
                wbt_done(req->q->rq_wb, &req->issue_stat);
                req->end_io(req, error);
        } else {
                if (blk_bidi_rq(req))
                        __blk_put_request(req->next_rq->q, req->next_rq);

                __blk_put_request(q, req);
        }
}
EXPORT_SYMBOL(blk_finish_request);

/**
 * blk_end_bidi_request - Complete a bidi request
 * @rq:         the request to complete
 * @error:      block status code
 * @nr_bytes:   number of bytes to complete @rq
 * @bidi_bytes: number of bytes to complete @rq->next_rq
 *
 * Description:
 *     Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
 *     Drivers that supports bidi can safely call this member for any
 *     type of request, bidi or uni.  In the later case @bidi_bytes is
 *     just ignored.
 *
 * Return:
 *     %false - we are done with this request
 *     %true  - still buffers pending for this request
 **/
static bool blk_end_bidi_request(struct request *rq, blk_status_t error,
                                 unsigned int nr_bytes, unsigned int bidi_bytes)
{
        struct request_queue *q = rq->q;
        unsigned long flags;

        WARN_ON_ONCE(q->mq_ops);

        if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
                return true;

        spin_lock_irqsave(q->queue_lock, flags);
        blk_finish_request(rq, error);
        spin_unlock_irqrestore(q->queue_lock, flags);

        return false;
}

/**
 * __blk_end_bidi_request - Complete a bidi request with queue lock held
 * @rq:         the request to complete
 * @error:      block status code
 * @nr_bytes:   number of bytes to complete @rq
 * @bidi_bytes: number of bytes to complete @rq->next_rq
 *
 * Description:
 *     Identical to blk_end_bidi_request() except that queue lock is
 *     assumed to be locked on entry and remains so on return.
 *
 * Return:
 *     %false - we are done with this request
 *     %true  - still buffers pending for this request
 **/
static bool __blk_end_bidi_request(struct request *rq, blk_status_t error,
                                   unsigned int nr_bytes, unsigned int bidi_bytes)
{
        lockdep_assert_held(rq->q->queue_lock);
        WARN_ON_ONCE(rq->q->mq_ops);

        if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
                return true;

        blk_finish_request(rq, error);

        return false;
}

/**
 * blk_end_request - Helper function for drivers to complete the request.
 * @rq:       the request being processed
 * @error:    block status code
 * @nr_bytes: number of bytes to complete
 *
 * Description:
 *     Ends I/O on a number of bytes attached to @rq.
 *     If @rq has leftover, sets it up for the next range of segments.
 *
 * Return:
 *     %false - we are done with this request
 *     %true  - still buffers pending for this request
 **/
bool blk_end_request(struct request *rq, blk_status_t error,
                unsigned int nr_bytes)
{
        WARN_ON_ONCE(rq->q->mq_ops);
        return blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(blk_end_request);

/**
 * blk_end_request_all - Helper function for drives to finish the request.
 * @rq: the request to finish
 * @error: block status code
 *
 * Description:
 *     Completely finish @rq.
 */
void blk_end_request_all(struct request *rq, blk_status_t error)
{
        bool pending;
        unsigned int bidi_bytes = 0;

        if (unlikely(blk_bidi_rq(rq)))
                bidi_bytes = blk_rq_bytes(rq->next_rq);

        pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
        BUG_ON(pending);
}
EXPORT_SYMBOL(blk_end_request_all);

/**
 * __blk_end_request - Helper function for drivers to complete the request.
 * @rq:       the request being processed
 * @error:    block status code
 * @nr_bytes: number of bytes to complete
 *
 * Description:
 *     Must be called with queue lock held unlike blk_end_request().
 *
 * Return:
 *     %false - we are done with this request
 *     %true  - still buffers pending for this request
 **/
bool __blk_end_request(struct request *rq, blk_status_t error,
                unsigned int nr_bytes)
{
        lockdep_assert_held(rq->q->queue_lock);
        WARN_ON_ONCE(rq->q->mq_ops);

        return __blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(__blk_end_request);

/**
 * __blk_end_request_all - Helper function for drives to finish the request.
 * @rq: the request to finish
 * @error:    block status code
 *
 * Description:
 *     Completely finish @rq.  Must be called with queue lock held.
 */
void __blk_end_request_all(struct request *rq, blk_status_t error)
{
        bool pending;
        unsigned int bidi_bytes = 0;

        lockdep_assert_held(rq->q->queue_lock);
        WARN_ON_ONCE(rq->q->mq_ops);

        if (unlikely(blk_bidi_rq(rq)))
                bidi_bytes = blk_rq_bytes(rq->next_rq);

        pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
        BUG_ON(pending);
}
EXPORT_SYMBOL(__blk_end_request_all);

/**
 * __blk_end_request_cur - Helper function to finish the current request chunk.
 * @rq: the request to finish the current chunk for
 * @error:    block status code
 *
 * Description:
 *     Complete the current consecutively mapped chunk from @rq.  Must
 *     be called with queue lock held.
 *
 * Return:
 *     %false - we are done with this request
 *     %true  - still buffers pending for this request
 */
bool __blk_end_request_cur(struct request *rq, blk_status_t error)
{
        return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
EXPORT_SYMBOL(__blk_end_request_cur);

void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
                     struct bio *bio)
{
        if (bio_has_data(bio))
                rq->nr_phys_segments = bio_phys_segments(q, bio);

        rq->__data_len = bio->bi_iter.bi_size;
        rq->bio = rq->biotail = bio;

        if (bio->bi_bdev)
                rq->rq_disk = bio->bi_bdev->bd_disk;
}

#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
/**
 * rq_flush_dcache_pages - Helper function to flush all pages in a request
 * @rq: the request to be flushed
 *
 * Description:
 *     Flush all pages in @rq.
 */
void rq_flush_dcache_pages(struct request *rq)
{
        struct req_iterator iter;
        struct bio_vec bvec;

        rq_for_each_segment(bvec, rq, iter)
                flush_dcache_page(bvec.bv_page);
}
EXPORT_SYMBOL_GPL(rq_flush_dcache_pages);
#endif

/**
 * blk_lld_busy - Check if underlying low-level drivers of a device are busy
 * @q : the queue of the device being checked
 *
 * Description:
 *    Check if underlying low-level drivers of a device are busy.
 *    If the drivers want to export their busy state, they must set own
 *    exporting function using blk_queue_lld_busy() first.
 *
 *    Basically, this function is used only by request stacking drivers
 *    to stop dispatching requests to underlying devices when underlying
 *    devices are busy.  This behavior helps more I/O merging on the queue
 *    of the request stacking driver and prevents I/O throughput regression
 *    on burst I/O load.
 *
 * Return:
 *    0 - Not busy (The request stacking driver should dispatch request)
 *    1 - Busy (The request stacking driver should stop dispatching request)
 */
int blk_lld_busy(struct request_queue *q)
{
        if (q->lld_busy_fn)
                return q->lld_busy_fn(q);

        return 0;
}
EXPORT_SYMBOL_GPL(blk_lld_busy);

/**
 * blk_rq_unprep_clone - Helper function to free all bios in a cloned request
 * @rq: the clone request to be cleaned up
 *
 * Description:
 *     Free all bios in @rq for a cloned request.
 */
void blk_rq_unprep_clone(struct request *rq)
{
        struct bio *bio;

        while ((bio = rq->bio) != NULL) {
                rq->bio = bio->bi_next;

                bio_put(bio);
        }
}
EXPORT_SYMBOL_GPL(blk_rq_unprep_clone);

/*
 * Copy attributes of the original request to the clone request.
 * The actual data parts (e.g. ->cmd, ->sense) are not copied.
 */
static void __blk_rq_prep_clone(struct request *dst, struct request *src)
{
        dst->cpu = src->cpu;
        dst->__sector = blk_rq_pos(src);
        dst->__data_len = blk_rq_bytes(src);
        dst->nr_phys_segments = src->nr_phys_segments;
        dst->ioprio = src->ioprio;
        dst->extra_len = src->extra_len;
}

/**
 * blk_rq_prep_clone - Helper function to setup clone request
 * @rq: the request to be setup
 * @rq_src: original request to be cloned
 * @bs: bio_set that bios for clone are allocated from
 * @gfp_mask: memory allocation mask for bio
 * @bio_ctr: setup function to be called for each clone bio.
 *           Returns %0 for success, non %0 for failure.
 * @data: private data to be passed to @bio_ctr
 *
 * Description:
 *     Clones bios in @rq_src to @rq, and copies attributes of @rq_src to @rq.
 *     The actual data parts of @rq_src (e.g. ->cmd, ->sense)
 *     are not copied, and copying such parts is the caller's responsibility.
 *     Also, pages which the original bios are pointing to are not copied
 *     and the cloned bios just point same pages.
 *     So cloned bios must be completed before original bios, which means
 *     the caller must complete @rq before @rq_src.
 */
int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
                      struct bio_set *bs, gfp_t gfp_mask,
                      int (*bio_ctr)(struct bio *, struct bio *, void *),
                      void *data)
{
        struct bio *bio, *bio_src;

        if (!bs)
                bs = fs_bio_set;

        __rq_for_each_bio(bio_src, rq_src) {
                bio = bio_clone_fast(bio_src, gfp_mask, bs);
                if (!bio)
                        goto free_and_out;

                if (bio_ctr && bio_ctr(bio, bio_src, data))
                        goto free_and_out;

                if (rq->bio) {
                        rq->biotail->bi_next = bio;
                        rq->biotail = bio;
                } else
                        rq->bio = rq->biotail = bio;
        }

        __blk_rq_prep_clone(rq, rq_src);

        return 0;

free_and_out:
        if (bio)
                bio_put(bio);
        blk_rq_unprep_clone(rq);

        return -ENOMEM;
}
EXPORT_SYMBOL_GPL(blk_rq_prep_clone);

int kblockd_schedule_work(struct work_struct *work)
{
        return queue_work(kblockd_workqueue, work);
}
EXPORT_SYMBOL(kblockd_schedule_work);

int kblockd_schedule_work_on(int cpu, struct work_struct *work)
{
        return queue_work_on(cpu, kblockd_workqueue, work);
}
EXPORT_SYMBOL(kblockd_schedule_work_on);

int kblockd_mod_delayed_work_on(int cpu, struct delayed_work *dwork,
                                unsigned long delay)
{
        return mod_delayed_work_on(cpu, kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_mod_delayed_work_on);

int kblockd_schedule_delayed_work(struct delayed_work *dwork,
                                  unsigned long delay)
{
        return queue_delayed_work(kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_schedule_delayed_work);

int kblockd_schedule_delayed_work_on(int cpu, struct delayed_work *dwork,
                                     unsigned long delay)
{
        return queue_delayed_work_on(cpu, kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_schedule_delayed_work_on);

/**
 * blk_start_plug - initialize blk_plug and track it inside the task_struct
 * @plug:       The &struct blk_plug that needs to be initialized
 *
 * Description:
 *   Tracking blk_plug inside the task_struct will help with auto-flushing the
 *   pending I/O should the task end up blocking between blk_start_plug() and
 *   blk_finish_plug(). This is important from a performance perspective, but
 *   also ensures that we don't deadlock. For instance, if the task is blocking
 *   for a memory allocation, memory reclaim could end up wanting to free a
 *   page belonging to that request that is currently residing in our private
 *   plug. By flushing the pending I/O when the process goes to sleep, we avoid
 *   this kind of deadlock.
 */
void blk_start_plug(struct blk_plug *plug)
{
        struct task_struct *tsk = current;

        /*
         * If this is a nested plug, don't actually assign it.
         */
        if (tsk->plug)
                return;

        INIT_LIST_HEAD(&plug->list);
        INIT_LIST_HEAD(&plug->mq_list);
        INIT_LIST_HEAD(&plug->cb_list);
        /*
         * Store ordering should not be needed here, since a potential
         * preempt will imply a full memory barrier
         */
        tsk->plug = plug;
}
EXPORT_SYMBOL(blk_start_plug);

static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
{
        struct request *rqa = container_of(a, struct request, queuelist);
        struct request *rqb = container_of(b, struct request, queuelist);

        return !(rqa->q < rqb->q ||
                (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}

/*
 * If 'from_schedule' is true, then postpone the dispatch of requests
 * until a safe kblockd context. We due this to avoid accidental big
 * additional stack usage in driver dispatch, in places where the originally
 * plugger did not intend it.
 */
static void queue_unplugged(struct request_queue *q, unsigned int depth,
                            bool from_schedule)
        __releases(q->queue_lock)
{
        lockdep_assert_held(q->queue_lock);

        trace_block_unplug(q, depth, !from_schedule);

        if (from_schedule)
                blk_run_queue_async(q);
        else
                __blk_run_queue(q);
        spin_unlock(q->queue_lock);
}

static void flush_plug_callbacks(struct blk_plug *plug, bool from_schedule)
{
        LIST_HEAD(callbacks);

        while (!list_empty(&plug->cb_list)) {
                list_splice_init(&plug->cb_list, &callbacks);

                while (!list_empty(&callbacks)) {
                        struct blk_plug_cb *cb = list_first_entry(&callbacks,
                                                          struct blk_plug_cb,
                                                          list);
                        list_del(&cb->list);
                        cb->callback(cb, from_schedule);
                }
        }
}

struct blk_plug_cb *blk_check_plugged(blk_plug_cb_fn unplug, void *data,
                                      int size)
{
        struct blk_plug *plug = current->plug;
        struct blk_plug_cb *cb;

        if (!plug)
                return NULL;

        list_for_each_entry(cb, &plug->cb_list, list)
                if (cb->callback == unplug && cb->data == data)
                        return cb;

        /* Not currently on the callback list */
        BUG_ON(size < sizeof(*cb));
        cb = kzalloc(size, GFP_ATOMIC);
        if (cb) {
                cb->data = data;
                cb->callback = unplug;
                list_add(&cb->list, &plug->cb_list);
        }
        return cb;
}
EXPORT_SYMBOL(blk_check_plugged);

void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
{
        struct request_queue *q;
        unsigned long flags;
        struct request *rq;
        LIST_HEAD(list);
        unsigned int depth;

        flush_plug_callbacks(plug, from_schedule);

        if (!list_empty(&plug->mq_list))
                blk_mq_flush_plug_list(plug, from_schedule);

        if (list_empty(&plug->list))
                return;

        list_splice_init(&plug->list, &list);

        list_sort(NULL, &list, plug_rq_cmp);

        q = NULL;
        depth = 0;

        /*
         * Save and disable interrupts here, to avoid doing it for every
         * queue lock we have to take.
         */
        local_irq_save(flags);
        while (!list_empty(&list)) {
                rq = list_entry_rq(list.next);
                list_del_init(&rq->queuelist);
                BUG_ON(!rq->q);
                if (rq->q != q) {
                        /*
                         * This drops the queue lock
                         */
                        if (q)
                                queue_unplugged(q, depth, from_schedule);
                        q = rq->q;
                        depth = 0;
                        spin_lock(q->queue_lock);
                }

                /*
                 * Short-circuit if @q is dead
                 */
                if (unlikely(blk_queue_dying(q))) {
                        __blk_end_request_all(rq, BLK_STS_IOERR);
                        continue;
                }

                /*
                 * rq is already accounted, so use raw insert
                 */
                if (op_is_flush(rq->cmd_flags))
                        __elv_add_request(q, rq, ELEVATOR_INSERT_FLUSH);
                else
                        __elv_add_request(q, rq, ELEVATOR_INSERT_SORT_MERGE);

                depth++;
        }

        /*
         * This drops the queue lock
         */
        if (q)
                queue_unplugged(q, depth, from_schedule);

        local_irq_restore(flags);
}

void blk_finish_plug(struct blk_plug *plug)
{
        if (plug != current->plug)
                return;
        blk_flush_plug_list(plug, false);

        current->plug = NULL;
}
EXPORT_SYMBOL(blk_finish_plug);

#ifdef CONFIG_PM
/**
 * blk_pm_runtime_init - Block layer runtime PM initialization routine
 * @q: the queue of the device
 * @dev: the device the queue belongs to
 *
 * Description:
 *    Initialize runtime-PM-related fields for @q and start auto suspend for
 *    @dev. Drivers that want to take advantage of request-based runtime PM
 *    should call this function after @dev has been initialized, and its
 *    request queue @q has been allocated, and runtime PM for it can not happen
 *    yet(either due to disabled/forbidden or its usage_count > 0). In most
 *    cases, driver should call this function before any I/O has taken place.
 *
 *    This function takes care of setting up using auto suspend for the device,
 *    the autosuspend delay is set to -1 to make runtime suspend impossible
 *    until an updated value is either set by user or by driver. Drivers do
 *    not need to touch other autosuspend settings.
 *
 *    The block layer runtime PM is request based, so only works for drivers
 *    that use request as their IO unit instead of those directly use bio's.
 */
void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
{
        /* not support for RQF_PM and ->rpm_status in blk-mq yet */
        if (q->mq_ops)
                return;

        q->dev = dev;
        q->rpm_status = RPM_ACTIVE;
        pm_runtime_set_autosuspend_delay(q->dev, -1);
        pm_runtime_use_autosuspend(q->dev);
}
EXPORT_SYMBOL(blk_pm_runtime_init);

/**
 * blk_pre_runtime_suspend - Pre runtime suspend check
 * @q: the queue of the device
 *
 * Description:
 *    This function will check if runtime suspend is allowed for the device
 *    by examining if there are any requests pending in the queue. If there
 *    are requests pending, the device can not be runtime suspended; otherwise,
 *    the queue's status will be updated to SUSPENDING and the driver can
 *    proceed to suspend the device.
 *
 *    For the not allowed case, we mark last busy for the device so that
 *    runtime PM core will try to autosuspend it some time later.
 *
 *    This function should be called near the start of the device's
 *    runtime_suspend callback.
 *
 * Return:
 *    0         - OK to runtime suspend the device
 *    -EBUSY    - Device should not be runtime suspended
 */
int blk_pre_runtime_suspend(struct request_queue *q)
{
        int ret = 0;

        if (!q->dev)
                return ret;

        spin_lock_irq(q->queue_lock);
        if (q->nr_pending) {
                ret = -EBUSY;
                pm_runtime_mark_last_busy(q->dev);
        } else {
                q->rpm_status = RPM_SUSPENDING;
        }
        spin_unlock_irq(q->queue_lock);
        return ret;
}
EXPORT_SYMBOL(blk_pre_runtime_suspend);

/**
 * blk_post_runtime_suspend - Post runtime suspend processing
 * @q: the queue of the device
 * @err: return value of the device's runtime_suspend function
 *
 * Description:
 *    Update the queue's runtime status according to the return value of the
 *    device's runtime suspend function and mark last busy for the device so
 *    that PM core will try to auto suspend the device at a later time.
 *
 *    This function should be called near the end of the device's
 *    runtime_suspend callback.
 */
void blk_post_runtime_suspend(struct request_queue *q, int err)
{
        if (!q->dev)
                return;

        spin_lock_irq(q->queue_lock);
        if (!err) {
                q->rpm_status = RPM_SUSPENDED;
        } else {
                q->rpm_status = RPM_ACTIVE;
                pm_runtime_mark_last_busy(q->dev);
        }
        spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_post_runtime_suspend);

/**
 * blk_pre_runtime_resume - Pre runtime resume processing
 * @q: the queue of the device
 *
 * Description:
 *    Update the queue's runtime status to RESUMING in preparation for the
 *    runtime resume of the device.
 *
 *    This function should be called near the start of the device's
 *    runtime_resume callback.
 */
void blk_pre_runtime_resume(struct request_queue *q)
{
        if (!q->dev)
                return;

        spin_lock_irq(q->queue_lock);
        q->rpm_status = RPM_RESUMING;
        spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_pre_runtime_resume);

/**
 * blk_post_runtime_resume - Post runtime resume processing
 * @q: the queue of the device
 * @err: return value of the device's runtime_resume function
 *
 * Description:
 *    Update the queue's runtime status according to the return value of the
 *    device's runtime_resume function. If it is successfully resumed, process
 *    the requests that are queued into the device's queue when it is resuming
 *    and then mark last busy and initiate autosuspend for it.
 *
 *    This function should be called near the end of the device's
 *    runtime_resume callback.
 */
void blk_post_runtime_resume(struct request_queue *q, int err)
{
        if (!q->dev)
                return;

        spin_lock_irq(q->queue_lock);
        if (!err) {
                q->rpm_status = RPM_ACTIVE;
                __blk_run_queue(q);
                pm_runtime_mark_last_busy(q->dev);
                pm_request_autosuspend(q->dev);
        } else {
                q->rpm_status = RPM_SUSPENDED;
        }
        spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_post_runtime_resume);

/**
 * blk_set_runtime_active - Force runtime status of the queue to be active
 * @q: the queue of the device
 *
 * If the device is left runtime suspended during system suspend the resume
 * hook typically resumes the device and corrects runtime status
 * accordingly. However, that does not affect the queue runtime PM status
 * which is still "suspended". This prevents processing requests from the
 * queue.
 *
 * This function can be used in driver's resume hook to correct queue
 * runtime PM status and re-enable peeking requests from the queue. It
 * should be called before first request is added to the queue.
 */
void blk_set_runtime_active(struct request_queue *q)
{
        spin_lock_irq(q->queue_lock);
        q->rpm_status = RPM_ACTIVE;
        pm_runtime_mark_last_busy(q->dev);
        pm_request_autosuspend(q->dev);
        spin_unlock_irq(q->queue_lock);
}
EXPORT_SYMBOL(blk_set_runtime_active);
#endif

int __init blk_dev_init(void)
{
        BUILD_BUG_ON(REQ_OP_LAST >= (1 << REQ_OP_BITS));
        BUILD_BUG_ON(REQ_OP_BITS + REQ_FLAG_BITS > 8 *
                        FIELD_SIZEOF(struct request, cmd_flags));
        BUILD_BUG_ON(REQ_OP_BITS + REQ_FLAG_BITS > 8 *
                        FIELD_SIZEOF(struct bio, bi_opf));

        /* used for unplugging and affects IO latency/throughput - HIGHPRI */
        kblockd_workqueue = alloc_workqueue("kblockd",
                                            WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
        if (!kblockd_workqueue)
                panic("Failed to create kblockd\n");

        request_cachep = kmem_cache_create("blkdev_requests",
                        sizeof(struct request), 0, SLAB_PANIC, NULL);

        blk_requestq_cachep = kmem_cache_create("request_queue",
                        sizeof(struct request_queue), 0, SLAB_PANIC, NULL);

#ifdef CONFIG_DEBUG_FS
        blk_debugfs_root = debugfs_create_dir("block", NULL);
#endif

        return 0;
}