drivers/input/touchscreen/ads7846.c

   1 /*
   2  * ADS7846 based touchscreen and sensor driver
   3  *
   4  * Copyright (c) 2005 David Brownell
   5  * Copyright (c) 2006 Nokia Corporation
   6  * Various changes: Imre Deak <imre.deak@nokia.com>
   7  *
   8  * Using code from:
   9  *  - corgi_ts.c
  10  *      Copyright (C) 2004-2005 Richard Purdie
  11  *  - omap_ts.[hc], ads7846.h, ts_osk.c
  12  *      Copyright (C) 2002 MontaVista Software
  13  *      Copyright (C) 2004 Texas Instruments
  14  *      Copyright (C) 2005 Dirk Behme
  15  *
  16  *  This program is free software; you can redistribute it and/or modify
  17  *  it under the terms of the GNU General Public License version 2 as
  18  *  published by the Free Software Foundation.
  19  */
  20 #include <linux/types.h>
  21 #include <linux/hwmon.h>
  22 #include <linux/err.h>
  23 #include <linux/sched.h>
  24 #include <linux/delay.h>
  25 #include <linux/input.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/slab.h>
  28 #include <linux/pm.h>
  29 #include <linux/of.h>
  30 #include <linux/of_gpio.h>
  31 #include <linux/of_device.h>
  32 #include <linux/gpio.h>
  33 #include <linux/spi/spi.h>
  34 #include <linux/spi/ads7846.h>
  35 #include <linux/regulator/consumer.h>
  36 #include <linux/module.h>
  37 #include <asm/irq.h>
  38
  39 /*
  40  * This code has been heavily tested on a Nokia 770, and lightly
  41  * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz).
  42  * TSC2046 is just newer ads7846 silicon.
  43  * Support for ads7843 tested on Atmel at91sam926x-EK.
  44  * Support for ads7845 has only been stubbed in.
  45  * Support for Analog Devices AD7873 and AD7843 tested.
  46  *
  47  * IRQ handling needs a workaround because of a shortcoming in handling
  48  * edge triggered IRQs on some platforms like the OMAP1/2. These
  49  * platforms don't handle the ARM lazy IRQ disabling properly, thus we
  50  * have to maintain our own SW IRQ disabled status. This should be
  51  * removed as soon as the affected platform's IRQ handling is fixed.
  52  *
  53  * App note sbaa036 talks in more detail about accurate sampling...
  54  * that ought to help in situations like LCDs inducing noise (which
  55  * can also be helped by using synch signals) and more generally.
  56  * This driver tries to utilize the measures described in the app
  57  * note. The strength of filtering can be set in the board-* specific
  58  * files.
  59  */
  60
  61 #define TS_POLL_DELAY   1       /* ms delay before the first sample */
  62 #define TS_POLL_PERIOD  5       /* ms delay between samples */
  63
  64 /* this driver doesn't aim at the peak continuous sample rate */
  65 #define SAMPLE_BITS     (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
  66
  67 struct ts_event {
  68         /*
  69          * For portability, we can't read 12 bit values using SPI (which
  70          * would make the controller deliver them as native byte order u16
  71          * with msbs zeroed).  Instead, we read them as two 8-bit values,
  72          * *** WHICH NEED BYTESWAPPING *** and range adjustment.
  73          */
  74         u16     x;
  75         u16     y;
  76         u16     z1, z2;
  77         bool    ignore;
  78         u8      x_buf[3];
  79         u8      y_buf[3];
  80 };
  81
  82 /*
  83  * We allocate this separately to avoid cache line sharing issues when
  84  * driver is used with DMA-based SPI controllers (like atmel_spi) on
  85  * systems where main memory is not DMA-coherent (most non-x86 boards).
  86  */
  87 struct ads7846_packet {
  88         u8                      read_x, read_y, read_z1, read_z2, pwrdown;
  89         u16                     dummy;          /* for the pwrdown read */
  90         struct ts_event         tc;
  91         /* for ads7845 with mpc5121 psc spi we use 3-byte buffers */
  92         u8                      read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3];
  93 };
  94
  95 struct ads7846 {
  96         struct input_dev        *input;
  97         char                    phys[32];
  98         char                    name[32];
  99
 100         struct spi_device       *spi;
 101         struct regulator        *reg;
 102
 103 #if IS_ENABLED(CONFIG_HWMON)
 104         struct device           *hwmon;
 105 #endif
 106
 107         u16                     model;
 108         u16                     vref_mv;
 109         u16                     vref_delay_usecs;
 110         u16                     x_plate_ohms;
 111         u16                     pressure_max;
 112
 113         bool                    swap_xy;
 114         bool                    use_internal;
 115
 116         struct ads7846_packet   *packet;
 117
 118         struct spi_transfer     xfer[18];
 119         struct spi_message      msg[5];
 120         int                     msg_count;
 121         wait_queue_head_t       wait;
 122
 123         bool                    pendown;
 124
 125         int                     read_cnt;
 126         int                     read_rep;
 127         int                     last_read;
 128
 129         u16                     debounce_max;
 130         u16                     debounce_tol;
 131         u16                     debounce_rep;
 132
 133         u16                     penirq_recheck_delay_usecs;
 134
 135         struct mutex            lock;
 136         bool                    stopped;        /* P: lock */
 137         bool                    disabled;       /* P: lock */
 138         bool                    suspended;      /* P: lock */
 139
 140         int                     (*filter)(void *data, int data_idx, int *val);
 141         void                    *filter_data;
 142         void                    (*filter_cleanup)(void *data);
 143         int                     (*get_pendown_state)(void);
 144         int                     gpio_pendown;
 145
 146         void                    (*wait_for_sync)(void);
 147 };
 148
 149 /* leave chip selected when we're done, for quicker re-select? */
 150 #if     0
 151 #define CS_CHANGE(xfer) ((xfer).cs_change = 1)
 152 #else
 153 #define CS_CHANGE(xfer) ((xfer).cs_change = 0)
 154 #endif
 155
 156 /*--------------------------------------------------------------------------*/
 157
 158 /* The ADS7846 has touchscreen and other sensors.
 159  * Earlier ads784x chips are somewhat compatible.
 160  */
 161 #define ADS_START               (1 << 7)
 162 #define ADS_A2A1A0_d_y          (1 << 4)        /* differential */
 163 #define ADS_A2A1A0_d_z1         (3 << 4)        /* differential */
 164 #define ADS_A2A1A0_d_z2         (4 << 4)        /* differential */
 165 #define ADS_A2A1A0_d_x          (5 << 4)        /* differential */
 166 #define ADS_A2A1A0_temp0        (0 << 4)        /* non-differential */
 167 #define ADS_A2A1A0_vbatt        (2 << 4)        /* non-differential */
 168 #define ADS_A2A1A0_vaux         (6 << 4)        /* non-differential */
 169 #define ADS_A2A1A0_temp1        (7 << 4)        /* non-differential */
 170 #define ADS_8_BIT               (1 << 3)
 171 #define ADS_12_BIT              (0 << 3)
 172 #define ADS_SER                 (1 << 2)        /* non-differential */
 173 #define ADS_DFR                 (0 << 2)        /* differential */
 174 #define ADS_PD10_PDOWN          (0 << 0)        /* low power mode + penirq */
 175 #define ADS_PD10_ADC_ON         (1 << 0)        /* ADC on */
 176 #define ADS_PD10_REF_ON         (2 << 0)        /* vREF on + penirq */
 177 #define ADS_PD10_ALL_ON         (3 << 0)        /* ADC + vREF on */
 178
 179 #define MAX_12BIT       ((1<<12)-1)
 180
 181 /* leave ADC powered up (disables penirq) between differential samples */
 182 #define READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
 183         | ADS_12_BIT | ADS_DFR | \
 184         (adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
 185
 186 #define READ_Y(vref)    (READ_12BIT_DFR(y,  1, vref))
 187 #define READ_Z1(vref)   (READ_12BIT_DFR(z1, 1, vref))
 188 #define READ_Z2(vref)   (READ_12BIT_DFR(z2, 1, vref))
 189
 190 #define READ_X(vref)    (READ_12BIT_DFR(x,  1, vref))
 191 #define PWRDOWN         (READ_12BIT_DFR(y,  0, 0))      /* LAST */
 192
 193 /* single-ended samples need to first power up reference voltage;
 194  * we leave both ADC and VREF powered
 195  */
 196 #define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
 197         | ADS_12_BIT | ADS_SER)
 198
 199 #define REF_ON  (READ_12BIT_DFR(x, 1, 1))
 200 #define REF_OFF (READ_12BIT_DFR(y, 0, 0))
 201
 202 /* Must be called with ts->lock held */
 203 static void ads7846_stop(struct ads7846 *ts)
 204 {
 205         if (!ts->disabled && !ts->suspended) {
 206                 /* Signal IRQ thread to stop polling and disable the handler. */
 207                 ts->stopped = true;
 208                 mb();
 209                 wake_up(&ts->wait);
 210                 disable_irq(ts->spi->irq);
 211         }
 212 }
 213
 214 /* Must be called with ts->lock held */
 215 static void ads7846_restart(struct ads7846 *ts)
 216 {
 217         if (!ts->disabled && !ts->suspended) {
 218                 /* Tell IRQ thread that it may poll the device. */
 219                 ts->stopped = false;
 220                 mb();
 221                 enable_irq(ts->spi->irq);
 222         }
 223 }
 224
 225 /* Must be called with ts->lock held */
 226 static void __ads7846_disable(struct ads7846 *ts)
 227 {
 228         ads7846_stop(ts);
 229         regulator_disable(ts->reg);
 230
 231         /*
 232          * We know the chip's in low power mode since we always
 233          * leave it that way after every request
 234          */
 235 }
 236
 237 /* Must be called with ts->lock held */
 238 static void __ads7846_enable(struct ads7846 *ts)
 239 {
 240         int error;
 241
 242         error = regulator_enable(ts->reg);
 243         if (error != 0)
 244                 dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
 245
 246         ads7846_restart(ts);
 247 }
 248
 249 static void ads7846_disable(struct ads7846 *ts)
 250 {
 251         mutex_lock(&ts->lock);
 252
 253         if (!ts->disabled) {
 254
 255                 if  (!ts->suspended)
 256                         __ads7846_disable(ts);
 257
 258                 ts->disabled = true;
 259         }
 260
 261         mutex_unlock(&ts->lock);
 262 }
 263
 264 static void ads7846_enable(struct ads7846 *ts)
 265 {
 266         mutex_lock(&ts->lock);
 267
 268         if (ts->disabled) {
 269
 270                 ts->disabled = false;
 271
 272                 if (!ts->suspended)
 273                         __ads7846_enable(ts);
 274         }
 275
 276         mutex_unlock(&ts->lock);
 277 }
 278
 279 /*--------------------------------------------------------------------------*/
 280
 281 /*
 282  * Non-touchscreen sensors only use single-ended conversions.
 283  * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
 284  * ads7846 lets that pin be unconnected, to use internal vREF.
 285  */
 286
 287 struct ser_req {
 288         u8                      ref_on;
 289         u8                      command;
 290         u8                      ref_off;
 291         u16                     scratch;
 292         struct spi_message      msg;
 293         struct spi_transfer     xfer[6];
 294         /*
 295          * DMA (thus cache coherency maintenance) requires the
 296          * transfer buffers to live in their own cache lines.
 297          */
 298         __be16 sample ____cacheline_aligned;
 299 };
 300
 301 struct ads7845_ser_req {
 302         u8                      command[3];
 303         struct spi_message      msg;
 304         struct spi_transfer     xfer[2];
 305         /*
 306          * DMA (thus cache coherency maintenance) requires the
 307          * transfer buffers to live in their own cache lines.
 308          */
 309         u8 sample[3] ____cacheline_aligned;
 310 };
 311
 312 static int ads7846_read12_ser(struct device *dev, unsigned command)
 313 {
 314         struct spi_device *spi = to_spi_device(dev);
 315         struct ads7846 *ts = dev_get_drvdata(dev);
 316         struct ser_req *req;
 317         int status;
 318
 319         req = kzalloc(sizeof *req, GFP_KERNEL);
 320         if (!req)
 321                 return -ENOMEM;
 322
 323         spi_message_init(&req->msg);
 324
 325         /* maybe turn on internal vREF, and let it settle */
 326         if (ts->use_internal) {
 327                 req->ref_on = REF_ON;
 328                 req->xfer[0].tx_buf = &req->ref_on;
 329                 req->xfer[0].len = 1;
 330                 spi_message_add_tail(&req->xfer[0], &req->msg);
 331
 332                 req->xfer[1].rx_buf = &req->scratch;
 333                 req->xfer[1].len = 2;
 334
 335                 /* for 1uF, settle for 800 usec; no cap, 100 usec.  */
 336                 req->xfer[1].delay_usecs = ts->vref_delay_usecs;
 337                 spi_message_add_tail(&req->xfer[1], &req->msg);
 338
 339                 /* Enable reference voltage */
 340                 command |= ADS_PD10_REF_ON;
 341         }
 342
 343         /* Enable ADC in every case */
 344         command |= ADS_PD10_ADC_ON;
 345
 346         /* take sample */
 347         req->command = (u8) command;
 348         req->xfer[2].tx_buf = &req->command;
 349         req->xfer[2].len = 1;
 350         spi_message_add_tail(&req->xfer[2], &req->msg);
 351
 352         req->xfer[3].rx_buf = &req->sample;
 353         req->xfer[3].len = 2;
 354         spi_message_add_tail(&req->xfer[3], &req->msg);
 355
 356         /* REVISIT:  take a few more samples, and compare ... */
 357
 358         /* converter in low power mode & enable PENIRQ */
 359         req->ref_off = PWRDOWN;
 360         req->xfer[4].tx_buf = &req->ref_off;
 361         req->xfer[4].len = 1;
 362         spi_message_add_tail(&req->xfer[4], &req->msg);
 363
 364         req->xfer[5].rx_buf = &req->scratch;
 365         req->xfer[5].len = 2;
 366         CS_CHANGE(req->xfer[5]);
 367         spi_message_add_tail(&req->xfer[5], &req->msg);
 368
 369         mutex_lock(&ts->lock);
 370         ads7846_stop(ts);
 371         status = spi_sync(spi, &req->msg);
 372         ads7846_restart(ts);
 373         mutex_unlock(&ts->lock);
 374
 375         if (status == 0) {
 376                 /* on-wire is a must-ignore bit, a BE12 value, then padding */
 377                 status = be16_to_cpu(req->sample);
 378                 status = status >> 3;
 379                 status &= 0x0fff;
 380         }
 381
 382         kfree(req);
 383         return status;
 384 }
 385
 386 static int ads7845_read12_ser(struct device *dev, unsigned command)
 387 {
 388         struct spi_device *spi = to_spi_device(dev);
 389         struct ads7846 *ts = dev_get_drvdata(dev);
 390         struct ads7845_ser_req *req;
 391         int status;
 392
 393         req = kzalloc(sizeof *req, GFP_KERNEL);
 394         if (!req)
 395                 return -ENOMEM;
 396
 397         spi_message_init(&req->msg);
 398
 399         req->command[0] = (u8) command;
 400         req->xfer[0].tx_buf = req->command;
 401         req->xfer[0].rx_buf = req->sample;
 402         req->xfer[0].len = 3;
 403         spi_message_add_tail(&req->xfer[0], &req->msg);
 404
 405         mutex_lock(&ts->lock);
 406         ads7846_stop(ts);
 407         status = spi_sync(spi, &req->msg);
 408         ads7846_restart(ts);
 409         mutex_unlock(&ts->lock);
 410
 411         if (status == 0) {
 412                 /* BE12 value, then padding */
 413                 status = be16_to_cpu(*((u16 *)&req->sample[1]));
 414                 status = status >> 3;
 415                 status &= 0x0fff;
 416         }
 417
 418         kfree(req);
 419         return status;
 420 }
 421
 422 #if IS_ENABLED(CONFIG_HWMON)
 423
 424 #define SHOW(name, var, adjust) static ssize_t \
 425 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 426 { \
 427         struct ads7846 *ts = dev_get_drvdata(dev); \
 428         ssize_t v = ads7846_read12_ser(&ts->spi->dev, \
 429                         READ_12BIT_SER(var)); \
 430         if (v < 0) \
 431                 return v; \
 432         return sprintf(buf, "%u\n", adjust(ts, v)); \
 433 } \
 434 static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
 435
 436
 437 /* Sysfs conventions report temperatures in millidegrees Celsius.
 438  * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
 439  * accuracy scheme without calibration data.  For now we won't try either;
 440  * userspace sees raw sensor values, and must scale/calibrate appropriately.
 441  */
 442 static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
 443 {
 444         return v;
 445 }
 446
 447 SHOW(temp0, temp0, null_adjust)         /* temp1_input */
 448 SHOW(temp1, temp1, null_adjust)         /* temp2_input */
 449
 450
 451 /* sysfs conventions report voltages in millivolts.  We can convert voltages
 452  * if we know vREF.  userspace may need to scale vAUX to match the board's
 453  * external resistors; we assume that vBATT only uses the internal ones.
 454  */
 455 static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
 456 {
 457         unsigned retval = v;
 458
 459         /* external resistors may scale vAUX into 0..vREF */
 460         retval *= ts->vref_mv;
 461         retval = retval >> 12;
 462
 463         return retval;
 464 }
 465
 466 static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
 467 {
 468         unsigned retval = vaux_adjust(ts, v);
 469
 470         /* ads7846 has a resistor ladder to scale this signal down */
 471         if (ts->model == 7846)
 472                 retval *= 4;
 473
 474         return retval;
 475 }
 476
 477 SHOW(in0_input, vaux, vaux_adjust)
 478 SHOW(in1_input, vbatt, vbatt_adjust)
 479
 480 static umode_t ads7846_is_visible(struct kobject *kobj, struct attribute *attr,
 481                                   int index)
 482 {
 483         struct device *dev = container_of(kobj, struct device, kobj);
 484         struct ads7846 *ts = dev_get_drvdata(dev);
 485
 486         if (ts->model == 7843 && index < 2)     /* in0, in1 */
 487                 return 0;
 488         if (ts->model == 7845 && index != 2)    /* in0 */
 489                 return 0;
 490
 491         return attr->mode;
 492 }
 493
 494 static struct attribute *ads7846_attributes[] = {
 495         &dev_attr_temp0.attr,           /* 0 */
 496         &dev_attr_temp1.attr,           /* 1 */
 497         &dev_attr_in0_input.attr,       /* 2 */
 498         &dev_attr_in1_input.attr,       /* 3 */
 499         NULL,
 500 };
 501
 502 static struct attribute_group ads7846_attr_group = {
 503         .attrs = ads7846_attributes,
 504         .is_visible = ads7846_is_visible,
 505 };
 506 __ATTRIBUTE_GROUPS(ads7846_attr);
 507
 508 static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 509 {
 510         /* hwmon sensors need a reference voltage */
 511         switch (ts->model) {
 512         case 7846:
 513                 if (!ts->vref_mv) {
 514                         dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
 515                         ts->vref_mv = 2500;
 516                         ts->use_internal = true;
 517                 }
 518                 break;
 519         case 7845:
 520         case 7843:
 521                 if (!ts->vref_mv) {
 522                         dev_warn(&spi->dev,
 523                                 "external vREF for ADS%d not specified\n",
 524                                 ts->model);
 525                         return 0;
 526                 }
 527                 break;
 528         }
 529
 530         ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
 531                                                       ts, ads7846_attr_groups);
 532
 533         return PTR_ERR_OR_ZERO(ts->hwmon);
 534 }
 535
 536 static void ads784x_hwmon_unregister(struct spi_device *spi,
 537                                      struct ads7846 *ts)
 538 {
 539         if (ts->hwmon)
 540                 hwmon_device_unregister(ts->hwmon);
 541 }
 542
 543 #else
 544 static inline int ads784x_hwmon_register(struct spi_device *spi,
 545                                          struct ads7846 *ts)
 546 {
 547         return 0;
 548 }
 549
 550 static inline void ads784x_hwmon_unregister(struct spi_device *spi,
 551                                             struct ads7846 *ts)
 552 {
 553 }
 554 #endif
 555
 556 static ssize_t ads7846_pen_down_show(struct device *dev,
 557                                      struct device_attribute *attr, char *buf)
 558 {
 559         struct ads7846 *ts = dev_get_drvdata(dev);
 560
 561         return sprintf(buf, "%u\n", ts->pendown);
 562 }
 563
 564 static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
 565
 566 static ssize_t ads7846_disable_show(struct device *dev,
 567                                      struct device_attribute *attr, char *buf)
 568 {
 569         struct ads7846 *ts = dev_get_drvdata(dev);
 570
 571         return sprintf(buf, "%u\n", ts->disabled);
 572 }
 573
 574 static ssize_t ads7846_disable_store(struct device *dev,
 575                                      struct device_attribute *attr,
 576                                      const char *buf, size_t count)
 577 {
 578         struct ads7846 *ts = dev_get_drvdata(dev);
 579         unsigned int i;
 580         int err;
 581
 582         err = kstrtouint(buf, 10, &i);
 583         if (err)
 584                 return err;
 585
 586         if (i)
 587                 ads7846_disable(ts);
 588         else
 589                 ads7846_enable(ts);
 590
 591         return count;
 592 }
 593
 594 static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
 595
 596 static struct attribute *ads784x_attributes[] = {
 597         &dev_attr_pen_down.attr,
 598         &dev_attr_disable.attr,
 599         NULL,
 600 };
 601
 602 static struct attribute_group ads784x_attr_group = {
 603         .attrs = ads784x_attributes,
 604 };
 605
 606 /*--------------------------------------------------------------------------*/
 607
 608 static int get_pendown_state(struct ads7846 *ts)
 609 {
 610         if (ts->get_pendown_state)
 611                 return ts->get_pendown_state();
 612
 613         return !gpio_get_value(ts->gpio_pendown);
 614 }
 615
 616 static void null_wait_for_sync(void)
 617 {
 618 }
 619
 620 static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
 621 {
 622         struct ads7846 *ts = ads;
 623
 624         if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
 625                 /* Start over collecting consistent readings. */
 626                 ts->read_rep = 0;
 627                 /*
 628                  * Repeat it, if this was the first read or the read
 629                  * wasn't consistent enough.
 630                  */
 631                 if (ts->read_cnt < ts->debounce_max) {
 632                         ts->last_read = *val;
 633                         ts->read_cnt++;
 634                         return ADS7846_FILTER_REPEAT;
 635                 } else {
 636                         /*
 637                          * Maximum number of debouncing reached and still
 638                          * not enough number of consistent readings. Abort
 639                          * the whole sample, repeat it in the next sampling
 640                          * period.
 641                          */
 642                         ts->read_cnt = 0;
 643                         return ADS7846_FILTER_IGNORE;
 644                 }
 645         } else {
 646                 if (++ts->read_rep > ts->debounce_rep) {
 647                         /*
 648                          * Got a good reading for this coordinate,
 649                          * go for the next one.
 650                          */
 651                         ts->read_cnt = 0;
 652                         ts->read_rep = 0;
 653                         return ADS7846_FILTER_OK;
 654                 } else {
 655                         /* Read more values that are consistent. */
 656                         ts->read_cnt++;
 657                         return ADS7846_FILTER_REPEAT;
 658                 }
 659         }
 660 }
 661
 662 static int ads7846_no_filter(void *ads, int data_idx, int *val)
 663 {
 664         return ADS7846_FILTER_OK;
 665 }
 666
 667 static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m)
 668 {
 669         int value;
 670         struct spi_transfer *t =
 671                 list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
 672
 673         if (ts->model == 7845) {
 674                 value = be16_to_cpup((__be16 *)&(((char *)t->rx_buf)[1]));
 675         } else {
 676                 /*
 677                  * adjust:  on-wire is a must-ignore bit, a BE12 value, then
 678                  * padding; built from two 8 bit values written msb-first.
 679                  */
 680                 value = be16_to_cpup((__be16 *)t->rx_buf);
 681         }
 682
 683         /* enforce ADC output is 12 bits width */
 684         return (value >> 3) & 0xfff;
 685 }
 686
 687 static void ads7846_update_value(struct spi_message *m, int val)
 688 {
 689         struct spi_transfer *t =
 690                 list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
 691
 692         *(u16 *)t->rx_buf = val;
 693 }
 694
 695 static void ads7846_read_state(struct ads7846 *ts)
 696 {
 697         struct ads7846_packet *packet = ts->packet;
 698         struct spi_message *m;
 699         int msg_idx = 0;
 700         int val;
 701         int action;
 702         int error;
 703
 704         while (msg_idx < ts->msg_count) {
 705
 706                 ts->wait_for_sync();
 707
 708                 m = &ts->msg[msg_idx];
 709                 error = spi_sync(ts->spi, m);
 710                 if (error) {
 711                         dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
 712                         packet->tc.ignore = true;
 713                         return;
 714                 }
 715
 716                 /*
 717                  * Last message is power down request, no need to convert
 718                  * or filter the value.
 719                  */
 720                 if (msg_idx < ts->msg_count - 1) {
 721
 722                         val = ads7846_get_value(ts, m);
 723
 724                         action = ts->filter(ts->filter_data, msg_idx, &val);
 725                         switch (action) {
 726                         case ADS7846_FILTER_REPEAT:
 727                                 continue;
 728
 729                         case ADS7846_FILTER_IGNORE:
 730                                 packet->tc.ignore = true;
 731                                 msg_idx = ts->msg_count - 1;
 732                                 continue;
 733
 734                         case ADS7846_FILTER_OK:
 735                                 ads7846_update_value(m, val);
 736                                 packet->tc.ignore = false;
 737                                 msg_idx++;
 738                                 break;
 739
 740                         default:
 741                                 BUG();
 742                         }
 743                 } else {
 744                         msg_idx++;
 745                 }
 746         }
 747 }
 748
 749 static void ads7846_report_state(struct ads7846 *ts)
 750 {
 751         struct ads7846_packet *packet = ts->packet;
 752         unsigned int Rt;
 753         u16 x, y, z1, z2;
 754
 755         /*
 756          * ads7846_get_value() does in-place conversion (including byte swap)
 757          * from on-the-wire format as part of debouncing to get stable
 758          * readings.
 759          */
 760         if (ts->model == 7845) {
 761                 x = *(u16 *)packet->tc.x_buf;
 762                 y = *(u16 *)packet->tc.y_buf;
 763                 z1 = 0;
 764                 z2 = 0;
 765         } else {
 766                 x = packet->tc.x;
 767                 y = packet->tc.y;
 768                 z1 = packet->tc.z1;
 769                 z2 = packet->tc.z2;
 770         }
 771
 772         /* range filtering */
 773         if (x == MAX_12BIT)
 774                 x = 0;
 775
 776         if (ts->model == 7843) {
 777                 Rt = ts->pressure_max / 2;
 778         } else if (ts->model == 7845) {
 779                 if (get_pendown_state(ts))
 780                         Rt = ts->pressure_max / 2;
 781                 else
 782                         Rt = 0;
 783                 dev_vdbg(&ts->spi->dev, "x/y: %d/%d, PD %d\n", x, y, Rt);
 784         } else if (likely(x && z1)) {
 785                 /* compute touch pressure resistance using equation #2 */
 786                 Rt = z2;
 787                 Rt -= z1;
 788                 Rt *= x;
 789                 Rt *= ts->x_plate_ohms;
 790                 Rt /= z1;
 791                 Rt = (Rt + 2047) >> 12;
 792         } else {
 793                 Rt = 0;
 794         }
 795
 796         /*
 797          * Sample found inconsistent by debouncing or pressure is beyond
 798          * the maximum. Don't report it to user space, repeat at least
 799          * once more the measurement
 800          */
 801         if (packet->tc.ignore || Rt > ts->pressure_max) {
 802                 dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
 803                          packet->tc.ignore, Rt);
 804                 return;
 805         }
 806
 807         /*
 808          * Maybe check the pendown state before reporting. This discards
 809          * false readings when the pen is lifted.
 810          */
 811         if (ts->penirq_recheck_delay_usecs) {
 812                 udelay(ts->penirq_recheck_delay_usecs);
 813                 if (!get_pendown_state(ts))
 814                         Rt = 0;
 815         }
 816
 817         /*
 818          * NOTE: We can't rely on the pressure to determine the pen down
 819          * state, even this controller has a pressure sensor. The pressure
 820          * value can fluctuate for quite a while after lifting the pen and
 821          * in some cases may not even settle at the expected value.
 822          *
 823          * The only safe way to check for the pen up condition is in the
 824          * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
 825          */
 826         if (Rt) {
 827                 struct input_dev *input = ts->input;
 828
 829                 if (ts->swap_xy)
 830                         swap(x, y);
 831
 832                 if (!ts->pendown) {
 833                         input_report_key(input, BTN_TOUCH, 1);
 834                         ts->pendown = true;
 835                         dev_vdbg(&ts->spi->dev, "DOWN\n");
 836                 }
 837
 838                 input_report_abs(input, ABS_X, x);
 839                 input_report_abs(input, ABS_Y, y);
 840                 input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
 841
 842                 input_sync(input);
 843                 dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
 844         }
 845 }
 846
 847 static irqreturn_t ads7846_hard_irq(int irq, void *handle)
 848 {
 849         struct ads7846 *ts = handle;
 850
 851         return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED;
 852 }
 853
 854
 855 static irqreturn_t ads7846_irq(int irq, void *handle)
 856 {
 857         struct ads7846 *ts = handle;
 858
 859         /* Start with a small delay before checking pendown state */
 860         msleep(TS_POLL_DELAY);
 861
 862         while (!ts->stopped && get_pendown_state(ts)) {
 863
 864                 /* pen is down, continue with the measurement */
 865                 ads7846_read_state(ts);
 866
 867                 if (!ts->stopped)
 868                         ads7846_report_state(ts);
 869
 870                 wait_event_timeout(ts->wait, ts->stopped,
 871                                    msecs_to_jiffies(TS_POLL_PERIOD));
 872         }
 873
 874         if (ts->pendown) {
 875                 struct input_dev *input = ts->input;
 876
 877                 input_report_key(input, BTN_TOUCH, 0);
 878                 input_report_abs(input, ABS_PRESSURE, 0);
 879                 input_sync(input);
 880
 881                 ts->pendown = false;
 882                 dev_vdbg(&ts->spi->dev, "UP\n");
 883         }
 884
 885         return IRQ_HANDLED;
 886 }
 887
 888 static int __maybe_unused ads7846_suspend(struct device *dev)
 889 {
 890         struct ads7846 *ts = dev_get_drvdata(dev);
 891
 892         mutex_lock(&ts->lock);
 893
 894         if (!ts->suspended) {
 895
 896                 if (!ts->disabled)
 897                         __ads7846_disable(ts);
 898
 899                 if (device_may_wakeup(&ts->spi->dev))
 900                         enable_irq_wake(ts->spi->irq);
 901
 902                 ts->suspended = true;
 903         }
 904
 905         mutex_unlock(&ts->lock);
 906
 907         return 0;
 908 }
 909
 910 static int __maybe_unused ads7846_resume(struct device *dev)
 911 {
 912         struct ads7846 *ts = dev_get_drvdata(dev);
 913
 914         mutex_lock(&ts->lock);
 915
 916         if (ts->suspended) {
 917
 918                 ts->suspended = false;
 919
 920                 if (device_may_wakeup(&ts->spi->dev))
 921                         disable_irq_wake(ts->spi->irq);
 922
 923                 if (!ts->disabled)
 924                         __ads7846_enable(ts);
 925         }
 926
 927         mutex_unlock(&ts->lock);
 928
 929         return 0;
 930 }
 931
 932 static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 933
 934 static int ads7846_setup_pendown(struct spi_device *spi,
 935                                  struct ads7846 *ts,
 936                                  const struct ads7846_platform_data *pdata)
 937 {
 938         int err;
 939
 940         /*
 941          * REVISIT when the irq can be triggered active-low, or if for some
 942          * reason the touchscreen isn't hooked up, we don't need to access
 943          * the pendown state.
 944          */
 945
 946         if (pdata->get_pendown_state) {
 947                 ts->get_pendown_state = pdata->get_pendown_state;
 948         } else if (gpio_is_valid(pdata->gpio_pendown)) {
 949
 950                 err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
 951                                        "ads7846_pendown");
 952                 if (err) {
 953                         dev_err(&spi->dev,
 954                                 "failed to request/setup pendown GPIO%d: %d\n",
 955                                 pdata->gpio_pendown, err);
 956                         return err;
 957                 }
 958
 959                 ts->gpio_pendown = pdata->gpio_pendown;
 960
 961                 if (pdata->gpio_pendown_debounce)
 962                         gpio_set_debounce(pdata->gpio_pendown,
 963                                           pdata->gpio_pendown_debounce);
 964         } else {
 965                 dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
 966                 return -EINVAL;
 967         }
 968
 969         return 0;
 970 }
 971
 972 /*
 973  * Set up the transfers to read touchscreen state; this assumes we
 974  * use formula #2 for pressure, not #3.
 975  */
 976 static void ads7846_setup_spi_msg(struct ads7846 *ts,
 977                                   const struct ads7846_platform_data *pdata)
 978 {
 979         struct spi_message *m = &ts->msg[0];
 980         struct spi_transfer *x = ts->xfer;
 981         struct ads7846_packet *packet = ts->packet;
 982         int vref = pdata->keep_vref_on;
 983
 984         if (ts->model == 7873) {
 985                 /*
 986                  * The AD7873 is almost identical to the ADS7846
 987                  * keep VREF off during differential/ratiometric
 988                  * conversion modes.
 989                  */
 990                 ts->model = 7846;
 991                 vref = 0;
 992         }
 993
 994         ts->msg_count = 1;
 995         spi_message_init(m);
 996         m->context = ts;
 997
 998         if (ts->model == 7845) {
 999                 packet->read_y_cmd[0] = READ_Y(vref);
1000                 packet->read_y_cmd[1] = 0;
1001                 packet->read_y_cmd[2] = 0;
1002                 x->tx_buf = &packet->read_y_cmd[0];
1003                 x->rx_buf = &packet->tc.y_buf[0];
1004                 x->len = 3;
1005                 spi_message_add_tail(x, m);
1006         } else {
1007                 /* y- still on; turn on only y+ (and ADC) */
1008                 packet->read_y = READ_Y(vref);
1009                 x->tx_buf = &packet->read_y;
1010                 x->len = 1;
1011                 spi_message_add_tail(x, m);
1012
1013                 x++;
1014                 x->rx_buf = &packet->tc.y;
1015                 x->len = 2;
1016                 spi_message_add_tail(x, m);
1017         }
1018
1019         /*
1020          * The first sample after switching drivers can be low quality;
1021          * optionally discard it, using a second one after the signals
1022          * have had enough time to stabilize.
1023          */
1024         if (pdata->settle_delay_usecs) {
1025                 x->delay_usecs = pdata->settle_delay_usecs;
1026
1027                 x++;
1028                 x->tx_buf = &packet->read_y;
1029                 x->len = 1;
1030                 spi_message_add_tail(x, m);
1031
1032                 x++;
1033                 x->rx_buf = &packet->tc.y;
1034                 x->len = 2;
1035                 spi_message_add_tail(x, m);
1036         }
1037
1038         ts->msg_count++;
1039         m++;
1040         spi_message_init(m);
1041         m->context = ts;
1042
1043         if (ts->model == 7845) {
1044                 x++;
1045                 packet->read_x_cmd[0] = READ_X(vref);
1046                 packet->read_x_cmd[1] = 0;
1047                 packet->read_x_cmd[2] = 0;
1048                 x->tx_buf = &packet->read_x_cmd[0];
1049                 x->rx_buf = &packet->tc.x_buf[0];
1050                 x->len = 3;
1051                 spi_message_add_tail(x, m);
1052         } else {
1053                 /* turn y- off, x+ on, then leave in lowpower */
1054                 x++;
1055                 packet->read_x = READ_X(vref);
1056                 x->tx_buf = &packet->read_x;
1057                 x->len = 1;
1058                 spi_message_add_tail(x, m);
1059
1060                 x++;
1061                 x->rx_buf = &packet->tc.x;
1062                 x->len = 2;
1063                 spi_message_add_tail(x, m);
1064         }
1065
1066         /* ... maybe discard first sample ... */
1067         if (pdata->settle_delay_usecs) {
1068                 x->delay_usecs = pdata->settle_delay_usecs;
1069
1070                 x++;
1071                 x->tx_buf = &packet->read_x;
1072                 x->len = 1;
1073                 spi_message_add_tail(x, m);
1074
1075                 x++;
1076                 x->rx_buf = &packet->tc.x;
1077                 x->len = 2;
1078                 spi_message_add_tail(x, m);
1079         }
1080
1081         /* turn y+ off, x- on; we'll use formula #2 */
1082         if (ts->model == 7846) {
1083                 ts->msg_count++;
1084                 m++;
1085                 spi_message_init(m);
1086                 m->context = ts;
1087
1088                 x++;
1089                 packet->read_z1 = READ_Z1(vref);
1090                 x->tx_buf = &packet->read_z1;
1091                 x->len = 1;
1092                 spi_message_add_tail(x, m);
1093
1094                 x++;
1095                 x->rx_buf = &packet->tc.z1;
1096                 x->len = 2;
1097                 spi_message_add_tail(x, m);
1098
1099                 /* ... maybe discard first sample ... */
1100                 if (pdata->settle_delay_usecs) {
1101                         x->delay_usecs = pdata->settle_delay_usecs;
1102
1103                         x++;
1104                         x->tx_buf = &packet->read_z1;
1105                         x->len = 1;
1106                         spi_message_add_tail(x, m);
1107
1108                         x++;
1109                         x->rx_buf = &packet->tc.z1;
1110                         x->len = 2;
1111                         spi_message_add_tail(x, m);
1112                 }
1113
1114                 ts->msg_count++;
1115                 m++;
1116                 spi_message_init(m);
1117                 m->context = ts;
1118
1119                 x++;
1120                 packet->read_z2 = READ_Z2(vref);
1121                 x->tx_buf = &packet->read_z2;
1122                 x->len = 1;
1123                 spi_message_add_tail(x, m);
1124
1125                 x++;
1126                 x->rx_buf = &packet->tc.z2;
1127                 x->len = 2;
1128                 spi_message_add_tail(x, m);
1129
1130                 /* ... maybe discard first sample ... */
1131                 if (pdata->settle_delay_usecs) {
1132                         x->delay_usecs = pdata->settle_delay_usecs;
1133
1134                         x++;
1135                         x->tx_buf = &packet->read_z2;
1136                         x->len = 1;
1137                         spi_message_add_tail(x, m);
1138
1139                         x++;
1140                         x->rx_buf = &packet->tc.z2;
1141                         x->len = 2;
1142                         spi_message_add_tail(x, m);
1143                 }
1144         }
1145
1146         /* power down */
1147         ts->msg_count++;
1148         m++;
1149         spi_message_init(m);
1150         m->context = ts;
1151
1152         if (ts->model == 7845) {
1153                 x++;
1154                 packet->pwrdown_cmd[0] = PWRDOWN;
1155                 packet->pwrdown_cmd[1] = 0;
1156                 packet->pwrdown_cmd[2] = 0;
1157                 x->tx_buf = &packet->pwrdown_cmd[0];
1158                 x->len = 3;
1159         } else {
1160                 x++;
1161                 packet->pwrdown = PWRDOWN;
1162                 x->tx_buf = &packet->pwrdown;
1163                 x->len = 1;
1164                 spi_message_add_tail(x, m);
1165
1166                 x++;
1167                 x->rx_buf = &packet->dummy;
1168                 x->len = 2;
1169         }
1170
1171         CS_CHANGE(*x);
1172         spi_message_add_tail(x, m);
1173 }
1174
1175 #ifdef CONFIG_OF
1176 static const struct of_device_id ads7846_dt_ids[] = {
1177         { .compatible = "ti,tsc2046",   .data = (void *) 7846 },
1178         { .compatible = "ti,ads7843",   .data = (void *) 7843 },
1179         { .compatible = "ti,ads7845",   .data = (void *) 7845 },
1180         { .compatible = "ti,ads7846",   .data = (void *) 7846 },
1181         { .compatible = "ti,ads7873",   .data = (void *) 7873 },
1182         { }
1183 };
1184 MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
1185
1186 static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
1187 {
1188         struct ads7846_platform_data *pdata;
1189         struct device_node *node = dev->of_node;
1190         const struct of_device_id *match;
1191
1192         if (!node) {
1193                 dev_err(dev, "Device does not have associated DT data\n");
1194                 return ERR_PTR(-EINVAL);
1195         }
1196
1197         match = of_match_device(ads7846_dt_ids, dev);
1198         if (!match) {
1199                 dev_err(dev, "Unknown device model\n");
1200                 return ERR_PTR(-EINVAL);
1201         }
1202
1203         pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
1204         if (!pdata)
1205                 return ERR_PTR(-ENOMEM);
1206
1207         pdata->model = (unsigned long)match->data;
1208
1209         of_property_read_u16(node, "ti,vref-delay-usecs",
1210                              &pdata->vref_delay_usecs);
1211         of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv);
1212         pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
1213
1214         pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy");
1215
1216         of_property_read_u16(node, "ti,settle-delay-usec",
1217                              &pdata->settle_delay_usecs);
1218         of_property_read_u16(node, "ti,penirq-recheck-delay-usecs",
1219                              &pdata->penirq_recheck_delay_usecs);
1220
1221         of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms);
1222         of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms);
1223
1224         of_property_read_u16(node, "ti,x-min", &pdata->x_min);
1225         of_property_read_u16(node, "ti,y-min", &pdata->y_min);
1226         of_property_read_u16(node, "ti,x-max", &pdata->x_max);
1227         of_property_read_u16(node, "ti,y-max", &pdata->y_max);
1228
1229         of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min);
1230         of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max);
1231
1232         of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max);
1233         of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol);
1234         of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep);
1235
1236         of_property_read_u32(node, "ti,pendown-gpio-debounce",
1237                              &pdata->gpio_pendown_debounce);
1238
1239         pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
1240                         of_property_read_bool(node, "linux,wakeup");
1241
1242         pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
1243
1244         return pdata;
1245 }
1246 #else
1247 static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
1248 {
1249         dev_err(dev, "no platform data defined\n");
1250         return ERR_PTR(-EINVAL);
1251 }
1252 #endif
1253
1254 static int ads7846_probe(struct spi_device *spi)
1255 {
1256         const struct ads7846_platform_data *pdata;
1257         struct ads7846 *ts;
1258         struct ads7846_packet *packet;
1259         struct input_dev *input_dev;
1260         unsigned long irq_flags;
1261         int err;
1262
1263         if (!spi->irq) {
1264                 dev_dbg(&spi->dev, "no IRQ?\n");
1265                 return -EINVAL;
1266         }
1267
1268         /* don't exceed max specified sample rate */
1269         if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
1270                 dev_err(&spi->dev, "f(sample) %d KHz?\n",
1271                                 (spi->max_speed_hz/SAMPLE_BITS)/1000);
1272                 return -EINVAL;
1273         }
1274
1275         /*
1276          * We'd set TX word size 8 bits and RX word size to 13 bits ... except
1277          * that even if the hardware can do that, the SPI controller driver
1278          * may not.  So we stick to very-portable 8 bit words, both RX and TX.
1279          */
1280         spi->bits_per_word = 8;
1281         spi->mode = SPI_MODE_0;
1282         err = spi_setup(spi);
1283         if (err < 0)
1284                 return err;
1285
1286         ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
1287         packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
1288         input_dev = input_allocate_device();
1289         if (!ts || !packet || !input_dev) {
1290                 err = -ENOMEM;
1291                 goto err_free_mem;
1292         }
1293
1294         spi_set_drvdata(spi, ts);
1295
1296         ts->packet = packet;
1297         ts->spi = spi;
1298         ts->input = input_dev;
1299
1300         mutex_init(&ts->lock);
1301         init_waitqueue_head(&ts->wait);
1302
1303         pdata = dev_get_platdata(&spi->dev);
1304         if (!pdata) {
1305                 pdata = ads7846_probe_dt(&spi->dev);
1306                 if (IS_ERR(pdata)) {
1307                         err = PTR_ERR(pdata);
1308                         goto err_free_mem;
1309                 }
1310         }
1311
1312         ts->model = pdata->model ? : 7846;
1313         ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
1314         ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
1315         ts->pressure_max = pdata->pressure_max ? : ~0;
1316
1317         ts->vref_mv = pdata->vref_mv;
1318         ts->swap_xy = pdata->swap_xy;
1319
1320         if (pdata->filter != NULL) {
1321                 if (pdata->filter_init != NULL) {
1322                         err = pdata->filter_init(pdata, &ts->filter_data);
1323                         if (err < 0)
1324                                 goto err_free_mem;
1325                 }
1326                 ts->filter = pdata->filter;
1327                 ts->filter_cleanup = pdata->filter_cleanup;
1328         } else if (pdata->debounce_max) {
1329                 ts->debounce_max = pdata->debounce_max;
1330                 if (ts->debounce_max < 2)
1331                         ts->debounce_max = 2;
1332                 ts->debounce_tol = pdata->debounce_tol;
1333                 ts->debounce_rep = pdata->debounce_rep;
1334                 ts->filter = ads7846_debounce_filter;
1335                 ts->filter_data = ts;
1336         } else {
1337                 ts->filter = ads7846_no_filter;
1338         }
1339
1340         err = ads7846_setup_pendown(spi, ts, pdata);
1341         if (err)
1342                 goto err_cleanup_filter;
1343
1344         if (pdata->penirq_recheck_delay_usecs)
1345                 ts->penirq_recheck_delay_usecs =
1346                                 pdata->penirq_recheck_delay_usecs;
1347
1348         ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
1349
1350         snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
1351         snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
1352
1353         input_dev->name = ts->name;
1354         input_dev->phys = ts->phys;
1355         input_dev->dev.parent = &spi->dev;
1356
1357         input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
1358         input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
1359         input_set_abs_params(input_dev, ABS_X,
1360                         pdata->x_min ? : 0,
1361                         pdata->x_max ? : MAX_12BIT,
1362                         0, 0);
1363         input_set_abs_params(input_dev, ABS_Y,
1364                         pdata->y_min ? : 0,
1365                         pdata->y_max ? : MAX_12BIT,
1366                         0, 0);
1367         input_set_abs_params(input_dev, ABS_PRESSURE,
1368                         pdata->pressure_min, pdata->pressure_max, 0, 0);
1369
1370         ads7846_setup_spi_msg(ts, pdata);
1371
1372         ts->reg = regulator_get(&spi->dev, "vcc");
1373         if (IS_ERR(ts->reg)) {
1374                 err = PTR_ERR(ts->reg);
1375                 dev_err(&spi->dev, "unable to get regulator: %d\n", err);
1376                 goto err_free_gpio;
1377         }
1378
1379         err = regulator_enable(ts->reg);
1380         if (err) {
1381                 dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
1382                 goto err_put_regulator;
1383         }
1384
1385         irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
1386         irq_flags |= IRQF_ONESHOT;
1387
1388         err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq,
1389                                    irq_flags, spi->dev.driver->name, ts);
1390         if (err && !pdata->irq_flags) {
1391                 dev_info(&spi->dev,
1392                         "trying pin change workaround on irq %d\n", spi->irq);
1393                 irq_flags |= IRQF_TRIGGER_RISING;
1394                 err = request_threaded_irq(spi->irq,
1395                                   ads7846_hard_irq, ads7846_irq,
1396                                   irq_flags, spi->dev.driver->name, ts);
1397         }
1398
1399         if (err) {
1400                 dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
1401                 goto err_disable_regulator;
1402         }
1403
1404         err = ads784x_hwmon_register(spi, ts);
1405         if (err)
1406                 goto err_free_irq;
1407
1408         dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
1409
1410         /*
1411          * Take a first sample, leaving nPENIRQ active and vREF off; avoid
1412          * the touchscreen, in case it's not connected.
1413          */
1414         if (ts->model == 7845)
1415                 ads7845_read12_ser(&spi->dev, PWRDOWN);
1416         else
1417                 (void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux));
1418
1419         err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
1420         if (err)
1421                 goto err_remove_hwmon;
1422
1423         err = input_register_device(input_dev);
1424         if (err)
1425                 goto err_remove_attr_group;
1426
1427         device_init_wakeup(&spi->dev, pdata->wakeup);
1428
1429         /*
1430          * If device does not carry platform data we must have allocated it
1431          * when parsing DT data.
1432          */
1433         if (!dev_get_platdata(&spi->dev))
1434                 devm_kfree(&spi->dev, (void *)pdata);
1435
1436         return 0;
1437
1438  err_remove_attr_group:
1439         sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
1440  err_remove_hwmon:
1441         ads784x_hwmon_unregister(spi, ts);
1442  err_free_irq:
1443         free_irq(spi->irq, ts);
1444  err_disable_regulator:
1445         regulator_disable(ts->reg);
1446  err_put_regulator:
1447         regulator_put(ts->reg);
1448  err_free_gpio:
1449         if (!ts->get_pendown_state)
1450                 gpio_free(ts->gpio_pendown);
1451  err_cleanup_filter:
1452         if (ts->filter_cleanup)
1453                 ts->filter_cleanup(ts->filter_data);
1454  err_free_mem:
1455         input_free_device(input_dev);
1456         kfree(packet);
1457         kfree(ts);
1458         return err;
1459 }
1460
1461 static int ads7846_remove(struct spi_device *spi)
1462 {
1463         struct ads7846 *ts = spi_get_drvdata(spi);
1464
1465         device_init_wakeup(&spi->dev, false);
1466
1467         sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
1468
1469         ads7846_disable(ts);
1470         free_irq(ts->spi->irq, ts);
1471
1472         input_unregister_device(ts->input);
1473
1474         ads784x_hwmon_unregister(spi, ts);
1475
1476         regulator_disable(ts->reg);
1477         regulator_put(ts->reg);
1478
1479         if (!ts->get_pendown_state) {
1480                 /*
1481                  * If we are not using specialized pendown method we must
1482                  * have been relying on gpio we set up ourselves.
1483                  */
1484                 gpio_free(ts->gpio_pendown);
1485         }
1486
1487         if (ts->filter_cleanup)
1488                 ts->filter_cleanup(ts->filter_data);
1489
1490         kfree(ts->packet);
1491         kfree(ts);
1492
1493         dev_dbg(&spi->dev, "unregistered touchscreen\n");
1494
1495         return 0;
1496 }
1497
1498 static struct spi_driver ads7846_driver = {
1499         .driver = {
1500                 .name   = "ads7846",
1501                 .pm     = &ads7846_pm,
1502                 .of_match_table = of_match_ptr(ads7846_dt_ids),
1503         },
1504         .probe          = ads7846_probe,
1505         .remove         = ads7846_remove,
1506 };
1507
1508 module_spi_driver(ads7846_driver);
1509
1510 MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
1511 MODULE_LICENSE("GPL");
1512 MODULE_ALIAS("spi:ads7846");