drivers/input/touchscreen/wm97xx-core.c

   1 /*
   2  * wm97xx-core.c  --  Touch screen driver core for Wolfson WM9705, WM9712
   3  *                    and WM9713 AC97 Codecs.
   4  *
   5  * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
   6  * Author: Liam Girdwood <lrg@slimlogic.co.uk>
   7  * Parts Copyright : Ian Molton <spyro@f2s.com>
   8  *                   Andrew Zabolotny <zap@homelink.ru>
   9  *                   Russell King <rmk@arm.linux.org.uk>
  10  *
  11  *  This program is free software; you can redistribute  it and/or modify it
  12  *  under  the terms of  the GNU General  Public License as published by the
  13  *  Free Software Foundation;  either version 2 of the  License, or (at your
  14  *  option) any later version.
  15  *
  16  * Notes:
  17  *
  18  *  Features:
  19  *       - supports WM9705, WM9712, WM9713
  20  *       - polling mode
  21  *       - continuous mode (arch-dependent)
  22  *       - adjustable rpu/dpp settings
  23  *       - adjustable pressure current
  24  *       - adjustable sample settle delay
  25  *       - 4 and 5 wire touchscreens (5 wire is WM9712 only)
  26  *       - pen down detection
  27  *       - battery monitor
  28  *       - sample AUX adcs
  29  *       - power management
  30  *       - codec GPIO
  31  *       - codec event notification
  32  * Todo
  33  *       - Support for async sampling control for noisy LCDs.
  34  *
  35  */
  36
  37 #include <linux/module.h>
  38 #include <linux/moduleparam.h>
  39 #include <linux/kernel.h>
  40 #include <linux/init.h>
  41 #include <linux/delay.h>
  42 #include <linux/string.h>
  43 #include <linux/proc_fs.h>
  44 #include <linux/pm.h>
  45 #include <linux/interrupt.h>
  46 #include <linux/bitops.h>
  47 #include <linux/workqueue.h>
  48 #include <linux/wm97xx.h>
  49 #include <linux/uaccess.h>
  50 #include <linux/io.h>
  51 #include <linux/slab.h>
  52
  53 #define TS_NAME                 "wm97xx"
  54 #define WM_CORE_VERSION         "1.00"
  55 #define DEFAULT_PRESSURE        0xb0c0
  56
  57
  58 /*
  59  * Touchscreen absolute values
  60  *
  61  * These parameters are used to help the input layer discard out of
  62  * range readings and reduce jitter etc.
  63  *
  64  *   o min, max:- indicate the min and max values your touch screen returns
  65  *   o fuzz:- use a higher number to reduce jitter
  66  *
  67  * The default values correspond to Mainstone II in QVGA mode
  68  *
  69  * Please read
  70  * Documentation/input/input-programming.txt for more details.
  71  */
  72
  73 static int abs_x[3] = {350, 3900, 5};
  74 module_param_array(abs_x, int, NULL, 0);
  75 MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
  76
  77 static int abs_y[3] = {320, 3750, 40};
  78 module_param_array(abs_y, int, NULL, 0);
  79 MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
  80
  81 static int abs_p[3] = {0, 150, 4};
  82 module_param_array(abs_p, int, NULL, 0);
  83 MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
  84
  85 /*
  86  * wm97xx IO access, all IO locking done by AC97 layer
  87  */
  88 int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
  89 {
  90         if (wm->ac97)
  91                 return wm->ac97->bus->ops->read(wm->ac97, reg);
  92         else
  93                 return -1;
  94 }
  95 EXPORT_SYMBOL_GPL(wm97xx_reg_read);
  96
  97 void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
  98 {
  99         /* cache digitiser registers */
 100         if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
 101                 wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
 102
 103         /* cache gpio regs */
 104         if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
 105                 wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
 106
 107         /* wm9713 irq reg */
 108         if (reg == 0x5a)
 109                 wm->misc = val;
 110
 111         if (wm->ac97)
 112                 wm->ac97->bus->ops->write(wm->ac97, reg, val);
 113 }
 114 EXPORT_SYMBOL_GPL(wm97xx_reg_write);
 115
 116 /**
 117  * wm97xx_read_aux_adc - Read the aux adc.
 118  * @wm: wm97xx device.
 119  * @adcsel: codec ADC to be read
 120  *
 121  * Reads the selected AUX ADC.
 122  */
 123
 124 int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
 125 {
 126         int power_adc = 0, auxval;
 127         u16 power = 0;
 128         int rc = 0;
 129         int timeout = 0;
 130
 131         /* get codec */
 132         mutex_lock(&wm->codec_mutex);
 133
 134         /* When the touchscreen is not in use, we may have to power up
 135          * the AUX ADC before we can use sample the AUX inputs->
 136          */
 137         if (wm->id == WM9713_ID2 &&
 138             (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
 139                 power_adc = 1;
 140                 wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
 141         }
 142
 143         /* Prepare the codec for AUX reading */
 144         wm->codec->aux_prepare(wm);
 145
 146         /* Turn polling mode on to read AUX ADC */
 147         wm->pen_probably_down = 1;
 148
 149         while (rc != RC_VALID && timeout++ < 5)
 150                 rc = wm->codec->poll_sample(wm, adcsel, &auxval);
 151
 152         if (power_adc)
 153                 wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
 154
 155         wm->codec->dig_restore(wm);
 156
 157         wm->pen_probably_down = 0;
 158
 159         if (timeout >= 5) {
 160                 dev_err(wm->dev,
 161                         "timeout reading auxadc %d, disabling digitiser\n",
 162                         adcsel);
 163                 wm->codec->dig_enable(wm, false);
 164         }
 165
 166         mutex_unlock(&wm->codec_mutex);
 167         return (rc == RC_VALID ? auxval & 0xfff : -EBUSY);
 168 }
 169 EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
 170
 171 /**
 172  * wm97xx_get_gpio - Get the status of a codec GPIO.
 173  * @wm: wm97xx device.
 174  * @gpio: gpio
 175  *
 176  * Get the status of a codec GPIO pin
 177  */
 178
 179 enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
 180 {
 181         u16 status;
 182         enum wm97xx_gpio_status ret;
 183
 184         mutex_lock(&wm->codec_mutex);
 185         status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 186
 187         if (status & gpio)
 188                 ret = WM97XX_GPIO_HIGH;
 189         else
 190                 ret = WM97XX_GPIO_LOW;
 191
 192         mutex_unlock(&wm->codec_mutex);
 193         return ret;
 194 }
 195 EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
 196
 197 /**
 198  * wm97xx_set_gpio - Set the status of a codec GPIO.
 199  * @wm: wm97xx device.
 200  * @gpio: gpio
 201  *
 202  *
 203  * Set the status of a codec GPIO pin
 204  */
 205
 206 void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
 207                                 enum wm97xx_gpio_status status)
 208 {
 209         u16 reg;
 210
 211         mutex_lock(&wm->codec_mutex);
 212         reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 213
 214         if (status == WM97XX_GPIO_HIGH)
 215                 reg |= gpio;
 216         else
 217                 reg &= ~gpio;
 218
 219         if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
 220                 wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
 221         else
 222                 wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
 223         mutex_unlock(&wm->codec_mutex);
 224 }
 225 EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
 226
 227 /*
 228  * Codec GPIO pin configuration, this sets pin direction, polarity,
 229  * stickyness and wake up.
 230  */
 231 void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
 232                    enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
 233                    enum wm97xx_gpio_wake wake)
 234 {
 235         u16 reg;
 236
 237         mutex_lock(&wm->codec_mutex);
 238         reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
 239
 240         if (pol == WM97XX_GPIO_POL_HIGH)
 241                 reg |= gpio;
 242         else
 243                 reg &= ~gpio;
 244
 245         wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
 246         reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
 247
 248         if (sticky == WM97XX_GPIO_STICKY)
 249                 reg |= gpio;
 250         else
 251                 reg &= ~gpio;
 252
 253         wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
 254         reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
 255
 256         if (wake == WM97XX_GPIO_WAKE)
 257                 reg |= gpio;
 258         else
 259                 reg &= ~gpio;
 260
 261         wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
 262         reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
 263
 264         if (dir == WM97XX_GPIO_IN)
 265                 reg |= gpio;
 266         else
 267                 reg &= ~gpio;
 268
 269         wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
 270         mutex_unlock(&wm->codec_mutex);
 271 }
 272 EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
 273
 274 /*
 275  * Configure the WM97XX_PRP value to use while system is suspended.
 276  * If a value other than 0 is set then WM97xx pen detection will be
 277  * left enabled in the configured mode while the system is in suspend,
 278  * the device has users and suspend has not been disabled via the
 279  * wakeup sysfs entries.
 280  *
 281  * @wm:   WM97xx device to configure
 282  * @mode: WM97XX_PRP value to configure while suspended
 283  */
 284 void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
 285 {
 286         wm->suspend_mode = mode;
 287         device_init_wakeup(&wm->input_dev->dev, mode != 0);
 288 }
 289 EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
 290
 291 /*
 292  * Handle a pen down interrupt.
 293  */
 294 static void wm97xx_pen_irq_worker(struct work_struct *work)
 295 {
 296         struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
 297         int pen_was_down = wm->pen_is_down;
 298
 299         /* do we need to enable the touch panel reader */
 300         if (wm->id == WM9705_ID2) {
 301                 if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) &
 302                                         WM97XX_PEN_DOWN)
 303                         wm->pen_is_down = 1;
 304                 else
 305                         wm->pen_is_down = 0;
 306         } else {
 307                 u16 status, pol;
 308                 mutex_lock(&wm->codec_mutex);
 309                 status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 310                 pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
 311
 312                 if (WM97XX_GPIO_13 & pol & status) {
 313                         wm->pen_is_down = 1;
 314                         wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol &
 315                                                 ~WM97XX_GPIO_13);
 316                 } else {
 317                         wm->pen_is_down = 0;
 318                         wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol |
 319                                          WM97XX_GPIO_13);
 320                 }
 321
 322                 if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
 323                         wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
 324                                                 ~WM97XX_GPIO_13) << 1);
 325                 else
 326                         wm97xx_reg_write(wm, AC97_GPIO_STATUS, status &
 327                                                 ~WM97XX_GPIO_13);
 328                 mutex_unlock(&wm->codec_mutex);
 329         }
 330
 331         /* If the system is not using continuous mode or it provides a
 332          * pen down operation then we need to schedule polls while the
 333          * pen is down.  Otherwise the machine driver is responsible
 334          * for scheduling reads.
 335          */
 336         if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
 337                 if (wm->pen_is_down && !pen_was_down) {
 338                         /* Data is not available immediately on pen down */
 339                         queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
 340                 }
 341
 342                 /* Let ts_reader report the pen up for debounce. */
 343                 if (!wm->pen_is_down && pen_was_down)
 344                         wm->pen_is_down = 1;
 345         }
 346
 347         if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
 348                 wm->mach_ops->acc_pen_up(wm);
 349
 350         wm->mach_ops->irq_enable(wm, 1);
 351 }
 352
 353 /*
 354  * Codec PENDOWN irq handler
 355  *
 356  * We have to disable the codec interrupt in the handler because it
 357  * can take up to 1ms to clear the interrupt source. We schedule a task
 358  * in a work queue to do the actual interaction with the chip.  The
 359  * interrupt is then enabled again in the slow handler when the source
 360  * has been cleared.
 361  */
 362 static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
 363 {
 364         struct wm97xx *wm = dev_id;
 365
 366         if (!work_pending(&wm->pen_event_work)) {
 367                 wm->mach_ops->irq_enable(wm, 0);
 368                 queue_work(wm->ts_workq, &wm->pen_event_work);
 369         }
 370
 371         return IRQ_HANDLED;
 372 }
 373
 374 /*
 375  * initialise pen IRQ handler and workqueue
 376  */
 377 static int wm97xx_init_pen_irq(struct wm97xx *wm)
 378 {
 379         u16 reg;
 380
 381         /* If an interrupt is supplied an IRQ enable operation must also be
 382          * provided. */
 383         BUG_ON(!wm->mach_ops->irq_enable);
 384
 385         if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
 386                         "wm97xx-pen", wm)) {
 387                 dev_err(wm->dev,
 388                         "Failed to register pen down interrupt, polling");
 389                 wm->pen_irq = 0;
 390                 return -EINVAL;
 391         }
 392
 393         /* Configure GPIO as interrupt source on WM971x */
 394         if (wm->id != WM9705_ID2) {
 395                 BUG_ON(!wm->mach_ops->irq_gpio);
 396                 reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
 397                 wm97xx_reg_write(wm, AC97_MISC_AFE,
 398                                 reg & ~(wm->mach_ops->irq_gpio));
 399                 reg = wm97xx_reg_read(wm, 0x5a);
 400                 wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
 401         }
 402
 403         return 0;
 404 }
 405
 406 static int wm97xx_read_samples(struct wm97xx *wm)
 407 {
 408         struct wm97xx_data data;
 409         int rc;
 410
 411         mutex_lock(&wm->codec_mutex);
 412
 413         if (wm->mach_ops && wm->mach_ops->acc_enabled)
 414                 rc = wm->mach_ops->acc_pen_down(wm);
 415         else
 416                 rc = wm->codec->poll_touch(wm, &data);
 417
 418         if (rc & RC_PENUP) {
 419                 if (wm->pen_is_down) {
 420                         wm->pen_is_down = 0;
 421                         dev_dbg(wm->dev, "pen up\n");
 422                         input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
 423                         input_report_key(wm->input_dev, BTN_TOUCH, 0);
 424                         input_sync(wm->input_dev);
 425                 } else if (!(rc & RC_AGAIN)) {
 426                         /* We need high frequency updates only while
 427                         * pen is down, the user never will be able to
 428                         * touch screen faster than a few times per
 429                         * second... On the other hand, when the user
 430                         * is actively working with the touchscreen we
 431                         * don't want to lose the quick response. So we
 432                         * will slowly increase sleep time after the
 433                         * pen is up and quicky restore it to ~one task
 434                         * switch when pen is down again.
 435                         */
 436                         if (wm->ts_reader_interval < HZ / 10)
 437                                 wm->ts_reader_interval++;
 438                 }
 439
 440         } else if (rc & RC_VALID) {
 441                 dev_dbg(wm->dev,
 442                         "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
 443                         data.x >> 12, data.x & 0xfff, data.y >> 12,
 444                         data.y & 0xfff, data.p >> 12, data.p & 0xfff);
 445
 446                 if (abs_x[0] > (data.x & 0xfff) ||
 447                     abs_x[1] < (data.x & 0xfff) ||
 448                     abs_y[0] > (data.y & 0xfff) ||
 449                     abs_y[1] < (data.y & 0xfff)) {
 450                         dev_dbg(wm->dev, "Measurement out of range, dropping it\n");
 451                         rc = RC_AGAIN;
 452                         goto out;
 453                 }
 454
 455                 input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
 456                 input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
 457                 input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
 458                 input_report_key(wm->input_dev, BTN_TOUCH, 1);
 459                 input_sync(wm->input_dev);
 460                 wm->pen_is_down = 1;
 461                 wm->ts_reader_interval = wm->ts_reader_min_interval;
 462         } else if (rc & RC_PENDOWN) {
 463                 dev_dbg(wm->dev, "pen down\n");
 464                 wm->pen_is_down = 1;
 465                 wm->ts_reader_interval = wm->ts_reader_min_interval;
 466         }
 467
 468 out:
 469         mutex_unlock(&wm->codec_mutex);
 470         return rc;
 471 }
 472
 473 /*
 474 * The touchscreen sample reader.
 475 */
 476 static void wm97xx_ts_reader(struct work_struct *work)
 477 {
 478         int rc;
 479         struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work);
 480
 481         BUG_ON(!wm->codec);
 482
 483         do {
 484                 rc = wm97xx_read_samples(wm);
 485         } while (rc & RC_AGAIN);
 486
 487         if (wm->pen_is_down || !wm->pen_irq)
 488                 queue_delayed_work(wm->ts_workq, &wm->ts_reader,
 489                                    wm->ts_reader_interval);
 490 }
 491
 492 /**
 493  * wm97xx_ts_input_open - Open the touch screen input device.
 494  * @idev:       Input device to be opened.
 495  *
 496  * Called by the input sub system to open a wm97xx touchscreen device.
 497  * Starts the touchscreen thread and touch digitiser.
 498  */
 499 static int wm97xx_ts_input_open(struct input_dev *idev)
 500 {
 501         struct wm97xx *wm = input_get_drvdata(idev);
 502
 503         wm->ts_workq = create_singlethread_workqueue("kwm97xx");
 504         if (wm->ts_workq == NULL) {
 505                 dev_err(wm->dev,
 506                         "Failed to create workqueue\n");
 507                 return -EINVAL;
 508         }
 509
 510         /* start digitiser */
 511         if (wm->mach_ops && wm->mach_ops->acc_enabled)
 512                 wm->codec->acc_enable(wm, 1);
 513         wm->codec->dig_enable(wm, 1);
 514
 515         INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
 516         INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
 517
 518         wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
 519         if (wm->ts_reader_min_interval < 1)
 520                 wm->ts_reader_min_interval = 1;
 521         wm->ts_reader_interval = wm->ts_reader_min_interval;
 522
 523         wm->pen_is_down = 0;
 524         if (wm->pen_irq)
 525                 wm97xx_init_pen_irq(wm);
 526         else
 527                 dev_err(wm->dev, "No IRQ specified\n");
 528
 529         /* If we either don't have an interrupt for pen down events or
 530          * failed to acquire it then we need to poll.
 531          */
 532         if (wm->pen_irq == 0)
 533                 queue_delayed_work(wm->ts_workq, &wm->ts_reader,
 534                                    wm->ts_reader_interval);
 535
 536         return 0;
 537 }
 538
 539 /**
 540  * wm97xx_ts_input_close - Close the touch screen input device.
 541  * @idev:       Input device to be closed.
 542  *
 543  * Called by the input sub system to close a wm97xx touchscreen
 544  * device.  Kills the touchscreen thread and stops the touch
 545  * digitiser.
 546  */
 547
 548 static void wm97xx_ts_input_close(struct input_dev *idev)
 549 {
 550         struct wm97xx *wm = input_get_drvdata(idev);
 551         u16 reg;
 552
 553         if (wm->pen_irq) {
 554                 /* Return the interrupt to GPIO usage (disabling it) */
 555                 if (wm->id != WM9705_ID2) {
 556                         BUG_ON(!wm->mach_ops->irq_gpio);
 557                         reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
 558                         wm97xx_reg_write(wm, AC97_MISC_AFE,
 559                                          reg | wm->mach_ops->irq_gpio);
 560                 }
 561
 562                 free_irq(wm->pen_irq, wm);
 563         }
 564
 565         wm->pen_is_down = 0;
 566
 567         /* Balance out interrupt disables/enables */
 568         if (cancel_work_sync(&wm->pen_event_work))
 569                 wm->mach_ops->irq_enable(wm, 1);
 570
 571         /* ts_reader rearms itself so we need to explicitly stop it
 572          * before we destroy the workqueue.
 573          */
 574         cancel_delayed_work_sync(&wm->ts_reader);
 575
 576         destroy_workqueue(wm->ts_workq);
 577
 578         /* stop digitiser */
 579         wm->codec->dig_enable(wm, 0);
 580         if (wm->mach_ops && wm->mach_ops->acc_enabled)
 581                 wm->codec->acc_enable(wm, 0);
 582 }
 583
 584 static int wm97xx_probe(struct device *dev)
 585 {
 586         struct wm97xx *wm;
 587         struct wm97xx_pdata *pdata = dev->platform_data;
 588         int ret = 0, id = 0;
 589
 590         wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
 591         if (!wm)
 592                 return -ENOMEM;
 593         mutex_init(&wm->codec_mutex);
 594
 595         wm->dev = dev;
 596         dev_set_drvdata(dev, wm);
 597         wm->ac97 = to_ac97_t(dev);
 598
 599         /* check that we have a supported codec */
 600         id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
 601         if (id != WM97XX_ID1) {
 602                 dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id);
 603                 ret = -ENODEV;
 604                 goto alloc_err;
 605         }
 606
 607         wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
 608
 609         wm->variant = WM97xx_GENERIC;
 610
 611         dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff);
 612
 613         switch (wm->id & 0xff) {
 614 #ifdef CONFIG_TOUCHSCREEN_WM9705
 615         case 0x05:
 616                 wm->codec = &wm9705_codec;
 617                 break;
 618 #endif
 619 #ifdef CONFIG_TOUCHSCREEN_WM9712
 620         case 0x12:
 621                 wm->codec = &wm9712_codec;
 622                 break;
 623 #endif
 624 #ifdef CONFIG_TOUCHSCREEN_WM9713
 625         case 0x13:
 626                 wm->codec = &wm9713_codec;
 627                 break;
 628 #endif
 629         default:
 630                 dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
 631                         wm->id & 0xff);
 632                 ret = -ENODEV;
 633                 goto alloc_err;
 634         }
 635
 636         /* set up physical characteristics */
 637         wm->codec->phy_init(wm);
 638
 639         /* load gpio cache */
 640         wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
 641         wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
 642         wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
 643         wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
 644         wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
 645         wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
 646
 647         wm->input_dev = input_allocate_device();
 648         if (wm->input_dev == NULL) {
 649                 ret = -ENOMEM;
 650                 goto alloc_err;
 651         }
 652
 653         /* set up touch configuration */
 654         wm->input_dev->name = "wm97xx touchscreen";
 655         wm->input_dev->phys = "wm97xx";
 656         wm->input_dev->open = wm97xx_ts_input_open;
 657         wm->input_dev->close = wm97xx_ts_input_close;
 658
 659         __set_bit(EV_ABS, wm->input_dev->evbit);
 660         __set_bit(EV_KEY, wm->input_dev->evbit);
 661         __set_bit(BTN_TOUCH, wm->input_dev->keybit);
 662
 663         input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
 664                              abs_x[2], 0);
 665         input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
 666                              abs_y[2], 0);
 667         input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
 668                              abs_p[2], 0);
 669
 670         input_set_drvdata(wm->input_dev, wm);
 671         wm->input_dev->dev.parent = dev;
 672
 673         ret = input_register_device(wm->input_dev);
 674         if (ret < 0)
 675                 goto dev_alloc_err;
 676
 677         /* register our battery device */
 678         wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
 679         if (!wm->battery_dev) {
 680                 ret = -ENOMEM;
 681                 goto batt_err;
 682         }
 683         platform_set_drvdata(wm->battery_dev, wm);
 684         wm->battery_dev->dev.parent = dev;
 685         wm->battery_dev->dev.platform_data = pdata;
 686         ret = platform_device_add(wm->battery_dev);
 687         if (ret < 0)
 688                 goto batt_reg_err;
 689
 690         /* register our extended touch device (for machine specific
 691          * extensions) */
 692         wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
 693         if (!wm->touch_dev) {
 694                 ret = -ENOMEM;
 695                 goto touch_err;
 696         }
 697         platform_set_drvdata(wm->touch_dev, wm);
 698         wm->touch_dev->dev.parent = dev;
 699         wm->touch_dev->dev.platform_data = pdata;
 700         ret = platform_device_add(wm->touch_dev);
 701         if (ret < 0)
 702                 goto touch_reg_err;
 703
 704         return ret;
 705
 706  touch_reg_err:
 707         platform_device_put(wm->touch_dev);
 708  touch_err:
 709         platform_device_del(wm->battery_dev);
 710  batt_reg_err:
 711         platform_device_put(wm->battery_dev);
 712  batt_err:
 713         input_unregister_device(wm->input_dev);
 714         wm->input_dev = NULL;
 715  dev_alloc_err:
 716         input_free_device(wm->input_dev);
 717  alloc_err:
 718         kfree(wm);
 719
 720         return ret;
 721 }
 722
 723 static int wm97xx_remove(struct device *dev)
 724 {
 725         struct wm97xx *wm = dev_get_drvdata(dev);
 726
 727         platform_device_unregister(wm->battery_dev);
 728         platform_device_unregister(wm->touch_dev);
 729         input_unregister_device(wm->input_dev);
 730         kfree(wm);
 731
 732         return 0;
 733 }
 734
 735 #ifdef CONFIG_PM
 736 static int wm97xx_suspend(struct device *dev, pm_message_t state)
 737 {
 738         struct wm97xx *wm = dev_get_drvdata(dev);
 739         u16 reg;
 740         int suspend_mode;
 741
 742         if (device_may_wakeup(&wm->input_dev->dev))
 743                 suspend_mode = wm->suspend_mode;
 744         else
 745                 suspend_mode = 0;
 746
 747         if (wm->input_dev->users)
 748                 cancel_delayed_work_sync(&wm->ts_reader);
 749
 750         /* Power down the digitiser (bypassing the cache for resume) */
 751         reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
 752         reg &= ~WM97XX_PRP_DET_DIG;
 753         if (wm->input_dev->users)
 754                 reg |= suspend_mode;
 755         wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
 756
 757         /* WM9713 has an additional power bit - turn it off if there
 758          * are no users or if suspend mode is zero. */
 759         if (wm->id == WM9713_ID2 &&
 760             (!wm->input_dev->users || !suspend_mode)) {
 761                 reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
 762                 wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
 763         }
 764
 765         return 0;
 766 }
 767
 768 static int wm97xx_resume(struct device *dev)
 769 {
 770         struct wm97xx *wm = dev_get_drvdata(dev);
 771
 772         /* restore digitiser and gpios */
 773         if (wm->id == WM9713_ID2) {
 774                 wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
 775                 wm97xx_reg_write(wm, 0x5a, wm->misc);
 776                 if (wm->input_dev->users) {
 777                         u16 reg;
 778                         reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
 779                         wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
 780                 }
 781         }
 782
 783         wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
 784         wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
 785
 786         wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
 787         wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
 788         wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
 789         wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
 790         wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
 791         wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
 792
 793         if (wm->input_dev->users && !wm->pen_irq) {
 794                 wm->ts_reader_interval = wm->ts_reader_min_interval;
 795                 queue_delayed_work(wm->ts_workq, &wm->ts_reader,
 796                                    wm->ts_reader_interval);
 797         }
 798
 799         return 0;
 800 }
 801
 802 #else
 803 #define wm97xx_suspend          NULL
 804 #define wm97xx_resume           NULL
 805 #endif
 806
 807 /*
 808  * Machine specific operations
 809  */
 810 int wm97xx_register_mach_ops(struct wm97xx *wm,
 811                              struct wm97xx_mach_ops *mach_ops)
 812 {
 813         mutex_lock(&wm->codec_mutex);
 814         if (wm->mach_ops) {
 815                 mutex_unlock(&wm->codec_mutex);
 816                 return -EINVAL;
 817         }
 818         wm->mach_ops = mach_ops;
 819         mutex_unlock(&wm->codec_mutex);
 820
 821         return 0;
 822 }
 823 EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
 824
 825 void wm97xx_unregister_mach_ops(struct wm97xx *wm)
 826 {
 827         mutex_lock(&wm->codec_mutex);
 828         wm->mach_ops = NULL;
 829         mutex_unlock(&wm->codec_mutex);
 830 }
 831 EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
 832
 833 static struct device_driver wm97xx_driver = {
 834         .name =         "wm97xx-ts",
 835         .bus =          &ac97_bus_type,
 836         .owner =        THIS_MODULE,
 837         .probe =        wm97xx_probe,
 838         .remove =       wm97xx_remove,
 839         .suspend =      wm97xx_suspend,
 840         .resume =       wm97xx_resume,
 841 };
 842
 843 static int __init wm97xx_init(void)
 844 {
 845         return driver_register(&wm97xx_driver);
 846 }
 847
 848 static void __exit wm97xx_exit(void)
 849 {
 850         driver_unregister(&wm97xx_driver);
 851 }
 852
 853 module_init(wm97xx_init);
 854 module_exit(wm97xx_exit);
 855
 856 /* Module information */
 857 MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 858 MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
 859 MODULE_LICENSE("GPL");