drivers/usb/serial/pl2303.c

   1 /*
   2  * Prolific PL2303 USB to serial adaptor driver
   3  *
   4  * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
   5  * Copyright (C) 2003 IBM Corp.
   6  *
   7  * Original driver for 2.2.x by anonymous
   8  *
   9  *      This program is free software; you can redistribute it and/or
  10  *      modify it under the terms of the GNU General Public License version
  11  *      2 as published by the Free Software Foundation.
  12  *
  13  * See Documentation/usb/usb-serial.txt for more information on using this
  14  * driver
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/errno.h>
  19 #include <linux/slab.h>
  20 #include <linux/tty.h>
  21 #include <linux/tty_driver.h>
  22 #include <linux/tty_flip.h>
  23 #include <linux/serial.h>
  24 #include <linux/module.h>
  25 #include <linux/moduleparam.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/uaccess.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/serial.h>
  30 #include <asm/unaligned.h>
  31 #include "pl2303.h"
  32
  33
  34 #define PL2303_QUIRK_UART_STATE_IDX0            BIT(0)
  35 #define PL2303_QUIRK_LEGACY                     BIT(1)
  36 #define PL2303_QUIRK_ENDPOINT_HACK              BIT(2)
  37
  38 static const struct usb_device_id id_table[] = {
  39         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),
  40                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  41         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
  42         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
  43         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
  44         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
  45         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
  46         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
  47         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
  48         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
  49         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
  50         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
  51         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
  52         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
  53         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
  54                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  55         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
  56         { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
  57         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
  58         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
  59         { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
  60         { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
  61         { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
  62         { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
  63         { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
  64         { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
  65         { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
  66         { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
  67         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
  68         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
  69                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  70         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
  71                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  72         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
  73                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  74         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),
  75                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  76         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
  77         { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
  78         { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
  79         { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
  80         { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
  81         { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
  82         { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
  83         { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
  84         { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
  85         { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),
  86                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  87         { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
  88         { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
  89         { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
  90         { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
  91         { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
  92         { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
  93         { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
  94         { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
  95         { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
  96         { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
  97         { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
  98         { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
  99         { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 100         { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 101         { }                                     /* Terminating entry */
 102 };
 103
 104 MODULE_DEVICE_TABLE(usb, id_table);
 105
 106 #define SET_LINE_REQUEST_TYPE           0x21
 107 #define SET_LINE_REQUEST                0x20
 108
 109 #define SET_CONTROL_REQUEST_TYPE        0x21
 110 #define SET_CONTROL_REQUEST             0x22
 111 #define CONTROL_DTR                     0x01
 112 #define CONTROL_RTS                     0x02
 113
 114 #define BREAK_REQUEST_TYPE              0x21
 115 #define BREAK_REQUEST                   0x23
 116 #define BREAK_ON                        0xffff
 117 #define BREAK_OFF                       0x0000
 118
 119 #define GET_LINE_REQUEST_TYPE           0xa1
 120 #define GET_LINE_REQUEST                0x21
 121
 122 #define VENDOR_WRITE_REQUEST_TYPE       0x40
 123 #define VENDOR_WRITE_REQUEST            0x01
 124
 125 #define VENDOR_READ_REQUEST_TYPE        0xc0
 126 #define VENDOR_READ_REQUEST             0x01
 127
 128 #define UART_STATE_INDEX                8
 129 #define UART_STATE_MSR_MASK             0x8b
 130 #define UART_STATE_TRANSIENT_MASK       0x74
 131 #define UART_DCD                        0x01
 132 #define UART_DSR                        0x02
 133 #define UART_BREAK_ERROR                0x04
 134 #define UART_RING                       0x08
 135 #define UART_FRAME_ERROR                0x10
 136 #define UART_PARITY_ERROR               0x20
 137 #define UART_OVERRUN_ERROR              0x40
 138 #define UART_CTS                        0x80
 139
 140 static void pl2303_set_break(struct usb_serial_port *port, bool enable);
 141
 142 enum pl2303_type {
 143         TYPE_01,        /* Type 0 and 1 (difference unknown) */
 144         TYPE_HX,        /* HX version of the pl2303 chip */
 145         TYPE_COUNT
 146 };
 147
 148 struct pl2303_type_data {
 149         speed_t max_baud_rate;
 150         unsigned long quirks;
 151 };
 152
 153 struct pl2303_serial_private {
 154         const struct pl2303_type_data *type;
 155         unsigned long quirks;
 156 };
 157
 158 struct pl2303_private {
 159         spinlock_t lock;
 160         u8 line_control;
 161         u8 line_status;
 162
 163         u8 line_settings[7];
 164 };
 165
 166 static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
 167         [TYPE_01] = {
 168                 .max_baud_rate =        1228800,
 169                 .quirks =               PL2303_QUIRK_LEGACY,
 170         },
 171         [TYPE_HX] = {
 172                 .max_baud_rate =        12000000,
 173         },
 174 };
 175
 176 static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
 177                                                         unsigned char buf[1])
 178 {
 179         struct device *dev = &serial->interface->dev;
 180         int res;
 181
 182         res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 183                         VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
 184                         value, 0, buf, 1, 100);
 185         if (res != 1) {
 186                 dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
 187                                                                 value, res);
 188                 if (res >= 0)
 189                         res = -EIO;
 190
 191                 return res;
 192         }
 193
 194         dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
 195
 196         return 0;
 197 }
 198
 199 static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
 200 {
 201         struct device *dev = &serial->interface->dev;
 202         int res;
 203
 204         dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
 205
 206         res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 207                         VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
 208                         value, index, NULL, 0, 100);
 209         if (res) {
 210                 dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
 211                                                                 value, res);
 212                 return res;
 213         }
 214
 215         return 0;
 216 }
 217
 218 static int pl2303_probe(struct usb_serial *serial,
 219                                         const struct usb_device_id *id)
 220 {
 221         usb_set_serial_data(serial, (void *)id->driver_info);
 222
 223         return 0;
 224 }
 225
 226 /*
 227  * Use interrupt endpoint from first interface if available.
 228  *
 229  * This is needed due to the looney way its endpoints are set up.
 230  */
 231 static int pl2303_endpoint_hack(struct usb_serial *serial,
 232                                         struct usb_serial_endpoints *epds)
 233 {
 234         struct usb_interface *interface = serial->interface;
 235         struct usb_device *dev = serial->dev;
 236         struct device *ddev = &interface->dev;
 237         struct usb_host_interface *iface_desc;
 238         struct usb_endpoint_descriptor *endpoint;
 239         unsigned int i;
 240
 241         if (interface == dev->actconfig->interface[0])
 242                 return 0;
 243
 244         /* check out the endpoints of the other interface */
 245         iface_desc = dev->actconfig->interface[0]->cur_altsetting;
 246
 247         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 248                 endpoint = &iface_desc->endpoint[i].desc;
 249
 250                 if (!usb_endpoint_is_int_in(endpoint))
 251                         continue;
 252
 253                 dev_dbg(ddev, "found interrupt in on separate interface\n");
 254                 if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
 255                         epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
 256         }
 257
 258         return 0;
 259 }
 260
 261 static int pl2303_calc_num_ports(struct usb_serial *serial,
 262                                         struct usb_serial_endpoints *epds)
 263 {
 264         unsigned long quirks = (unsigned long)usb_get_serial_data(serial);
 265         struct device *dev = &serial->interface->dev;
 266         int ret;
 267
 268         if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {
 269                 ret = pl2303_endpoint_hack(serial, epds);
 270                 if (ret)
 271                         return ret;
 272         }
 273
 274         if (epds->num_interrupt_in < 1) {
 275                 dev_err(dev, "required interrupt-in endpoint missing\n");
 276                 return -ENODEV;
 277         }
 278
 279         return 1;
 280 }
 281
 282 static int pl2303_startup(struct usb_serial *serial)
 283 {
 284         struct pl2303_serial_private *spriv;
 285         enum pl2303_type type = TYPE_01;
 286         unsigned char *buf;
 287
 288         spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 289         if (!spriv)
 290                 return -ENOMEM;
 291
 292         buf = kmalloc(1, GFP_KERNEL);
 293         if (!buf) {
 294                 kfree(spriv);
 295                 return -ENOMEM;
 296         }
 297
 298         if (serial->dev->descriptor.bDeviceClass == 0x02)
 299                 type = TYPE_01;         /* type 0 */
 300         else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
 301                 type = TYPE_HX;
 302         else if (serial->dev->descriptor.bDeviceClass == 0x00)
 303                 type = TYPE_01;         /* type 1 */
 304         else if (serial->dev->descriptor.bDeviceClass == 0xFF)
 305                 type = TYPE_01;         /* type 1 */
 306         dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 307
 308         spriv->type = &pl2303_type_data[type];
 309         spriv->quirks = (unsigned long)usb_get_serial_data(serial);
 310         spriv->quirks |= spriv->type->quirks;
 311
 312         usb_set_serial_data(serial, spriv);
 313
 314         pl2303_vendor_read(serial, 0x8484, buf);
 315         pl2303_vendor_write(serial, 0x0404, 0);
 316         pl2303_vendor_read(serial, 0x8484, buf);
 317         pl2303_vendor_read(serial, 0x8383, buf);
 318         pl2303_vendor_read(serial, 0x8484, buf);
 319         pl2303_vendor_write(serial, 0x0404, 1);
 320         pl2303_vendor_read(serial, 0x8484, buf);
 321         pl2303_vendor_read(serial, 0x8383, buf);
 322         pl2303_vendor_write(serial, 0, 1);
 323         pl2303_vendor_write(serial, 1, 0);
 324         if (spriv->quirks & PL2303_QUIRK_LEGACY)
 325                 pl2303_vendor_write(serial, 2, 0x24);
 326         else
 327                 pl2303_vendor_write(serial, 2, 0x44);
 328
 329         kfree(buf);
 330
 331         return 0;
 332 }
 333
 334 static void pl2303_release(struct usb_serial *serial)
 335 {
 336         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 337
 338         kfree(spriv);
 339 }
 340
 341 static int pl2303_port_probe(struct usb_serial_port *port)
 342 {
 343         struct pl2303_private *priv;
 344
 345         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 346         if (!priv)
 347                 return -ENOMEM;
 348
 349         spin_lock_init(&priv->lock);
 350
 351         usb_set_serial_port_data(port, priv);
 352
 353         port->port.drain_delay = 256;
 354
 355         return 0;
 356 }
 357
 358 static int pl2303_port_remove(struct usb_serial_port *port)
 359 {
 360         struct pl2303_private *priv = usb_get_serial_port_data(port);
 361
 362         kfree(priv);
 363
 364         return 0;
 365 }
 366
 367 static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
 368 {
 369         struct usb_device *dev = port->serial->dev;
 370         int retval;
 371
 372         dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
 373
 374         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 375                                  SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 376                                  value, 0, NULL, 0, 100);
 377         if (retval)
 378                 dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
 379
 380         return retval;
 381 }
 382
 383 /*
 384  * Returns the nearest supported baud rate that can be set directly without
 385  * using divisors.
 386  */
 387 static speed_t pl2303_get_supported_baud_rate(speed_t baud)
 388 {
 389         static const speed_t baud_sup[] = {
 390                 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
 391                 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
 392                 614400, 921600, 1228800, 2457600, 3000000, 6000000
 393         };
 394
 395         unsigned i;
 396
 397         for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
 398                 if (baud_sup[i] > baud)
 399                         break;
 400         }
 401
 402         if (i == ARRAY_SIZE(baud_sup))
 403                 baud = baud_sup[i - 1];
 404         else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
 405                 baud = baud_sup[i - 1];
 406         else
 407                 baud = baud_sup[i];
 408
 409         return baud;
 410 }
 411
 412 /*
 413  * NOTE: If unsupported baud rates are set directly, the PL2303 seems to
 414  *       use 9600 baud.
 415  */
 416 static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
 417                                                                 speed_t baud)
 418 {
 419         put_unaligned_le32(baud, buf);
 420
 421         return baud;
 422 }
 423
 424 static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
 425                                                                 speed_t baud)
 426 {
 427         unsigned int baseline, mantissa, exponent;
 428
 429         /*
 430          * Apparently the formula is:
 431          *   baudrate = 12M * 32 / (mantissa * 4^exponent)
 432          * where
 433          *   mantissa = buf[8:0]
 434          *   exponent = buf[11:9]
 435          */
 436         baseline = 12000000 * 32;
 437         mantissa = baseline / baud;
 438         if (mantissa == 0)
 439                 mantissa = 1;   /* Avoid dividing by zero if baud > 32*12M. */
 440         exponent = 0;
 441         while (mantissa >= 512) {
 442                 if (exponent < 7) {
 443                         mantissa >>= 2; /* divide by 4 */
 444                         exponent++;
 445                 } else {
 446                         /* Exponent is maxed. Trim mantissa and leave. */
 447                         mantissa = 511;
 448                         break;
 449                 }
 450         }
 451
 452         buf[3] = 0x80;
 453         buf[2] = 0;
 454         buf[1] = exponent << 1 | mantissa >> 8;
 455         buf[0] = mantissa & 0xff;
 456
 457         /* Calculate and return the exact baud rate. */
 458         baud = (baseline / mantissa) >> (exponent << 1);
 459
 460         return baud;
 461 }
 462
 463 static void pl2303_encode_baud_rate(struct tty_struct *tty,
 464                                         struct usb_serial_port *port,
 465                                         u8 buf[4])
 466 {
 467         struct usb_serial *serial = port->serial;
 468         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 469         speed_t baud_sup;
 470         speed_t baud;
 471
 472         baud = tty_get_baud_rate(tty);
 473         dev_dbg(&port->dev, "baud requested = %u\n", baud);
 474         if (!baud)
 475                 return;
 476
 477         if (spriv->type->max_baud_rate)
 478                 baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
 479         /*
 480          * Use direct method for supported baud rates, otherwise use divisors.
 481          */
 482         baud_sup = pl2303_get_supported_baud_rate(baud);
 483
 484         if (baud == baud_sup)
 485                 baud = pl2303_encode_baud_rate_direct(buf, baud);
 486         else
 487                 baud = pl2303_encode_baud_rate_divisor(buf, baud);
 488
 489         /* Save resulting baud rate */
 490         tty_encode_baud_rate(tty, baud, baud);
 491         dev_dbg(&port->dev, "baud set = %u\n", baud);
 492 }
 493
 494 static int pl2303_get_line_request(struct usb_serial_port *port,
 495                                                         unsigned char buf[7])
 496 {
 497         struct usb_device *udev = port->serial->dev;
 498         int ret;
 499
 500         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 501                                 GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 502                                 0, 0, buf, 7, 100);
 503         if (ret != 7) {
 504                 dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
 505
 506                 if (ret >= 0)
 507                         ret = -EIO;
 508
 509                 return ret;
 510         }
 511
 512         dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
 513
 514         return 0;
 515 }
 516
 517 static int pl2303_set_line_request(struct usb_serial_port *port,
 518                                                         unsigned char buf[7])
 519 {
 520         struct usb_device *udev = port->serial->dev;
 521         int ret;
 522
 523         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 524                                 SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 525                                 0, 0, buf, 7, 100);
 526         if (ret < 0) {
 527                 dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
 528                 return ret;
 529         }
 530
 531         dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
 532
 533         return 0;
 534 }
 535
 536 static void pl2303_set_termios(struct tty_struct *tty,
 537                 struct usb_serial_port *port, struct ktermios *old_termios)
 538 {
 539         struct usb_serial *serial = port->serial;
 540         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 541         struct pl2303_private *priv = usb_get_serial_port_data(port);
 542         unsigned long flags;
 543         unsigned char *buf;
 544         int ret;
 545         u8 control;
 546
 547         if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
 548                 return;
 549
 550         buf = kzalloc(7, GFP_KERNEL);
 551         if (!buf) {
 552                 /* Report back no change occurred */
 553                 if (old_termios)
 554                         tty->termios = *old_termios;
 555                 return;
 556         }
 557
 558         pl2303_get_line_request(port, buf);
 559
 560         switch (C_CSIZE(tty)) {
 561         case CS5:
 562                 buf[6] = 5;
 563                 break;
 564         case CS6:
 565                 buf[6] = 6;
 566                 break;
 567         case CS7:
 568                 buf[6] = 7;
 569                 break;
 570         default:
 571         case CS8:
 572                 buf[6] = 8;
 573         }
 574         dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 575
 576         /* For reference buf[0]:buf[3] baud rate value */
 577         pl2303_encode_baud_rate(tty, port, &buf[0]);
 578
 579         /* For reference buf[4]=0 is 1 stop bits */
 580         /* For reference buf[4]=1 is 1.5 stop bits */
 581         /* For reference buf[4]=2 is 2 stop bits */
 582         if (C_CSTOPB(tty)) {
 583                 /*
 584                  * NOTE: Comply with "real" UARTs / RS232:
 585                  *       use 1.5 instead of 2 stop bits with 5 data bits
 586                  */
 587                 if (C_CSIZE(tty) == CS5) {
 588                         buf[4] = 1;
 589                         dev_dbg(&port->dev, "stop bits = 1.5\n");
 590                 } else {
 591                         buf[4] = 2;
 592                         dev_dbg(&port->dev, "stop bits = 2\n");
 593                 }
 594         } else {
 595                 buf[4] = 0;
 596                 dev_dbg(&port->dev, "stop bits = 1\n");
 597         }
 598
 599         if (C_PARENB(tty)) {
 600                 /* For reference buf[5]=0 is none parity */
 601                 /* For reference buf[5]=1 is odd parity */
 602                 /* For reference buf[5]=2 is even parity */
 603                 /* For reference buf[5]=3 is mark parity */
 604                 /* For reference buf[5]=4 is space parity */
 605                 if (C_PARODD(tty)) {
 606                         if (C_CMSPAR(tty)) {
 607                                 buf[5] = 3;
 608                                 dev_dbg(&port->dev, "parity = mark\n");
 609                         } else {
 610                                 buf[5] = 1;
 611                                 dev_dbg(&port->dev, "parity = odd\n");
 612                         }
 613                 } else {
 614                         if (C_CMSPAR(tty)) {
 615                                 buf[5] = 4;
 616                                 dev_dbg(&port->dev, "parity = space\n");
 617                         } else {
 618                                 buf[5] = 2;
 619                                 dev_dbg(&port->dev, "parity = even\n");
 620                         }
 621                 }
 622         } else {
 623                 buf[5] = 0;
 624                 dev_dbg(&port->dev, "parity = none\n");
 625         }
 626
 627         /*
 628          * Some PL2303 are known to lose bytes if you change serial settings
 629          * even to the same values as before. Thus we actually need to filter
 630          * in this specific case.
 631          *
 632          * Note that the tty_termios_hw_change check above is not sufficient
 633          * as a previously requested baud rate may differ from the one
 634          * actually used (and stored in old_termios).
 635          *
 636          * NOTE: No additional locking needed for line_settings as it is
 637          *       only used in set_termios, which is serialised against itself.
 638          */
 639         if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
 640                 ret = pl2303_set_line_request(port, buf);
 641                 if (!ret)
 642                         memcpy(priv->line_settings, buf, 7);
 643         }
 644
 645         /* change control lines if we are switching to or from B0 */
 646         spin_lock_irqsave(&priv->lock, flags);
 647         control = priv->line_control;
 648         if (C_BAUD(tty) == B0)
 649                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 650         else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
 651                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 652         if (control != priv->line_control) {
 653                 control = priv->line_control;
 654                 spin_unlock_irqrestore(&priv->lock, flags);
 655                 pl2303_set_control_lines(port, control);
 656         } else {
 657                 spin_unlock_irqrestore(&priv->lock, flags);
 658         }
 659
 660         if (C_CRTSCTS(tty)) {
 661                 if (spriv->quirks & PL2303_QUIRK_LEGACY)
 662                         pl2303_vendor_write(serial, 0x0, 0x41);
 663                 else
 664                         pl2303_vendor_write(serial, 0x0, 0x61);
 665         } else {
 666                 pl2303_vendor_write(serial, 0x0, 0x0);
 667         }
 668
 669         kfree(buf);
 670 }
 671
 672 static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 673 {
 674         struct pl2303_private *priv = usb_get_serial_port_data(port);
 675         unsigned long flags;
 676         u8 control;
 677
 678         spin_lock_irqsave(&priv->lock, flags);
 679         if (on)
 680                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 681         else
 682                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 683         control = priv->line_control;
 684         spin_unlock_irqrestore(&priv->lock, flags);
 685
 686         pl2303_set_control_lines(port, control);
 687 }
 688
 689 static void pl2303_close(struct usb_serial_port *port)
 690 {
 691         usb_serial_generic_close(port);
 692         usb_kill_urb(port->interrupt_in_urb);
 693         pl2303_set_break(port, false);
 694 }
 695
 696 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 697 {
 698         struct usb_serial *serial = port->serial;
 699         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 700         int result;
 701
 702         if (spriv->quirks & PL2303_QUIRK_LEGACY) {
 703                 usb_clear_halt(serial->dev, port->write_urb->pipe);
 704                 usb_clear_halt(serial->dev, port->read_urb->pipe);
 705         } else {
 706                 /* reset upstream data pipes */
 707                 pl2303_vendor_write(serial, 8, 0);
 708                 pl2303_vendor_write(serial, 9, 0);
 709         }
 710
 711         /* Setup termios */
 712         if (tty)
 713                 pl2303_set_termios(tty, port, NULL);
 714
 715         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 716         if (result) {
 717                 dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
 718                         result);
 719                 return result;
 720         }
 721
 722         result = usb_serial_generic_open(tty, port);
 723         if (result) {
 724                 usb_kill_urb(port->interrupt_in_urb);
 725                 return result;
 726         }
 727
 728         return 0;
 729 }
 730
 731 static int pl2303_tiocmset(struct tty_struct *tty,
 732                            unsigned int set, unsigned int clear)
 733 {
 734         struct usb_serial_port *port = tty->driver_data;
 735         struct pl2303_private *priv = usb_get_serial_port_data(port);
 736         unsigned long flags;
 737         u8 control;
 738         int ret;
 739
 740         spin_lock_irqsave(&priv->lock, flags);
 741         if (set & TIOCM_RTS)
 742                 priv->line_control |= CONTROL_RTS;
 743         if (set & TIOCM_DTR)
 744                 priv->line_control |= CONTROL_DTR;
 745         if (clear & TIOCM_RTS)
 746                 priv->line_control &= ~CONTROL_RTS;
 747         if (clear & TIOCM_DTR)
 748                 priv->line_control &= ~CONTROL_DTR;
 749         control = priv->line_control;
 750         spin_unlock_irqrestore(&priv->lock, flags);
 751
 752         ret = pl2303_set_control_lines(port, control);
 753         if (ret)
 754                 return usb_translate_errors(ret);
 755
 756         return 0;
 757 }
 758
 759 static int pl2303_tiocmget(struct tty_struct *tty)
 760 {
 761         struct usb_serial_port *port = tty->driver_data;
 762         struct pl2303_private *priv = usb_get_serial_port_data(port);
 763         unsigned long flags;
 764         unsigned int mcr;
 765         unsigned int status;
 766         unsigned int result;
 767
 768         spin_lock_irqsave(&priv->lock, flags);
 769         mcr = priv->line_control;
 770         status = priv->line_status;
 771         spin_unlock_irqrestore(&priv->lock, flags);
 772
 773         result = ((mcr & CONTROL_DTR)           ? TIOCM_DTR : 0)
 774                   | ((mcr & CONTROL_RTS)        ? TIOCM_RTS : 0)
 775                   | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 776                   | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 777                   | ((status & UART_RING)       ? TIOCM_RI  : 0)
 778                   | ((status & UART_DCD)        ? TIOCM_CD  : 0);
 779
 780         dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
 781
 782         return result;
 783 }
 784
 785 static int pl2303_carrier_raised(struct usb_serial_port *port)
 786 {
 787         struct pl2303_private *priv = usb_get_serial_port_data(port);
 788
 789         if (priv->line_status & UART_DCD)
 790                 return 1;
 791
 792         return 0;
 793 }
 794
 795 static int pl2303_ioctl(struct tty_struct *tty,
 796                         unsigned int cmd, unsigned long arg)
 797 {
 798         struct serial_struct ser;
 799         struct usb_serial_port *port = tty->driver_data;
 800
 801         switch (cmd) {
 802         case TIOCGSERIAL:
 803                 memset(&ser, 0, sizeof ser);
 804                 ser.type = PORT_16654;
 805                 ser.line = port->minor;
 806                 ser.port = port->port_number;
 807                 ser.baud_base = 460800;
 808
 809                 if (copy_to_user((void __user *)arg, &ser, sizeof ser))
 810                         return -EFAULT;
 811
 812                 return 0;
 813         default:
 814                 break;
 815         }
 816
 817         return -ENOIOCTLCMD;
 818 }
 819
 820 static void pl2303_set_break(struct usb_serial_port *port, bool enable)
 821 {
 822         struct usb_serial *serial = port->serial;
 823         u16 state;
 824         int result;
 825
 826         if (enable)
 827                 state = BREAK_ON;
 828         else
 829                 state = BREAK_OFF;
 830
 831         dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 832                         state == BREAK_OFF ? "off" : "on");
 833
 834         result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 835                                  BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 836                                  0, NULL, 0, 100);
 837         if (result)
 838                 dev_err(&port->dev, "error sending break = %d\n", result);
 839 }
 840
 841 static void pl2303_break_ctl(struct tty_struct *tty, int state)
 842 {
 843         struct usb_serial_port *port = tty->driver_data;
 844
 845         pl2303_set_break(port, state);
 846 }
 847
 848 static void pl2303_update_line_status(struct usb_serial_port *port,
 849                                       unsigned char *data,
 850                                       unsigned int actual_length)
 851 {
 852         struct usb_serial *serial = port->serial;
 853         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 854         struct pl2303_private *priv = usb_get_serial_port_data(port);
 855         struct tty_struct *tty;
 856         unsigned long flags;
 857         unsigned int status_idx = UART_STATE_INDEX;
 858         u8 status;
 859         u8 delta;
 860
 861         if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
 862                 status_idx = 0;
 863
 864         if (actual_length < status_idx + 1)
 865                 return;
 866
 867         status = data[status_idx];
 868
 869         /* Save off the uart status for others to look at */
 870         spin_lock_irqsave(&priv->lock, flags);
 871         delta = priv->line_status ^ status;
 872         priv->line_status = status;
 873         spin_unlock_irqrestore(&priv->lock, flags);
 874
 875         if (status & UART_BREAK_ERROR)
 876                 usb_serial_handle_break(port);
 877
 878         if (delta & UART_STATE_MSR_MASK) {
 879                 if (delta & UART_CTS)
 880                         port->icount.cts++;
 881                 if (delta & UART_DSR)
 882                         port->icount.dsr++;
 883                 if (delta & UART_RING)
 884                         port->icount.rng++;
 885                 if (delta & UART_DCD) {
 886                         port->icount.dcd++;
 887                         tty = tty_port_tty_get(&port->port);
 888                         if (tty) {
 889                                 usb_serial_handle_dcd_change(port, tty,
 890                                                         status & UART_DCD);
 891                                 tty_kref_put(tty);
 892                         }
 893                 }
 894
 895                 wake_up_interruptible(&port->port.delta_msr_wait);
 896         }
 897 }
 898
 899 static void pl2303_read_int_callback(struct urb *urb)
 900 {
 901         struct usb_serial_port *port =  urb->context;
 902         unsigned char *data = urb->transfer_buffer;
 903         unsigned int actual_length = urb->actual_length;
 904         int status = urb->status;
 905         int retval;
 906
 907         switch (status) {
 908         case 0:
 909                 /* success */
 910                 break;
 911         case -ECONNRESET:
 912         case -ENOENT:
 913         case -ESHUTDOWN:
 914                 /* this urb is terminated, clean up */
 915                 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
 916                         __func__, status);
 917                 return;
 918         default:
 919                 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
 920                         __func__, status);
 921                 goto exit;
 922         }
 923
 924         usb_serial_debug_data(&port->dev, __func__,
 925                               urb->actual_length, urb->transfer_buffer);
 926
 927         pl2303_update_line_status(port, data, actual_length);
 928
 929 exit:
 930         retval = usb_submit_urb(urb, GFP_ATOMIC);
 931         if (retval) {
 932                 dev_err(&port->dev,
 933                         "%s - usb_submit_urb failed with result %d\n",
 934                         __func__, retval);
 935         }
 936 }
 937
 938 static void pl2303_process_read_urb(struct urb *urb)
 939 {
 940         struct usb_serial_port *port = urb->context;
 941         struct pl2303_private *priv = usb_get_serial_port_data(port);
 942         unsigned char *data = urb->transfer_buffer;
 943         char tty_flag = TTY_NORMAL;
 944         unsigned long flags;
 945         u8 line_status;
 946         int i;
 947
 948         /* update line status */
 949         spin_lock_irqsave(&priv->lock, flags);
 950         line_status = priv->line_status;
 951         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 952         spin_unlock_irqrestore(&priv->lock, flags);
 953
 954         if (!urb->actual_length)
 955                 return;
 956
 957         /*
 958          * Break takes precedence over parity, which takes precedence over
 959          * framing errors.
 960          */
 961         if (line_status & UART_BREAK_ERROR)
 962                 tty_flag = TTY_BREAK;
 963         else if (line_status & UART_PARITY_ERROR)
 964                 tty_flag = TTY_PARITY;
 965         else if (line_status & UART_FRAME_ERROR)
 966                 tty_flag = TTY_FRAME;
 967
 968         if (tty_flag != TTY_NORMAL)
 969                 dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__,
 970                                                                 tty_flag);
 971         /* overrun is special, not associated with a char */
 972         if (line_status & UART_OVERRUN_ERROR)
 973                 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
 974
 975         if (port->port.console && port->sysrq) {
 976                 for (i = 0; i < urb->actual_length; ++i)
 977                         if (!usb_serial_handle_sysrq_char(port, data[i]))
 978                                 tty_insert_flip_char(&port->port, data[i],
 979                                                 tty_flag);
 980         } else {
 981                 tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
 982                                                         urb->actual_length);
 983         }
 984
 985         tty_flip_buffer_push(&port->port);
 986 }
 987
 988 static struct usb_serial_driver pl2303_device = {
 989         .driver = {
 990                 .owner =        THIS_MODULE,
 991                 .name =         "pl2303",
 992         },
 993         .id_table =             id_table,
 994         .num_bulk_in =          1,
 995         .num_bulk_out =         1,
 996         .num_interrupt_in =     0,      /* see pl2303_calc_num_ports */
 997         .bulk_in_size =         256,
 998         .bulk_out_size =        256,
 999         .open =                 pl2303_open,
1000         .close =                pl2303_close,
1001         .dtr_rts =              pl2303_dtr_rts,
1002         .carrier_raised =       pl2303_carrier_raised,
1003         .ioctl =                pl2303_ioctl,
1004         .break_ctl =            pl2303_break_ctl,
1005         .set_termios =          pl2303_set_termios,
1006         .tiocmget =             pl2303_tiocmget,
1007         .tiocmset =             pl2303_tiocmset,
1008         .tiocmiwait =           usb_serial_generic_tiocmiwait,
1009         .process_read_urb =     pl2303_process_read_urb,
1010         .read_int_callback =    pl2303_read_int_callback,
1011         .probe =                pl2303_probe,
1012         .calc_num_ports =       pl2303_calc_num_ports,
1013         .attach =               pl2303_startup,
1014         .release =              pl2303_release,
1015         .port_probe =           pl2303_port_probe,
1016         .port_remove =          pl2303_port_remove,
1017 };
1018
1019 static struct usb_serial_driver * const serial_drivers[] = {
1020         &pl2303_device, NULL
1021 };
1022
1023 module_usb_serial_driver(serial_drivers, id_table);
1024
1025 MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
1026 MODULE_LICENSE("GPL");