]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/ftrace.h
ARM: dts: tx6: add enet_out clock for FEC
[karo-tx-linux.git] / include / linux / ftrace.h
1 /*
2  * Ftrace header.  For implementation details beyond the random comments
3  * scattered below, see: Documentation/trace/ftrace-design.txt
4  */
5
6 #ifndef _LINUX_FTRACE_H
7 #define _LINUX_FTRACE_H
8
9 #include <linux/trace_clock.h>
10 #include <linux/kallsyms.h>
11 #include <linux/linkage.h>
12 #include <linux/bitops.h>
13 #include <linux/ptrace.h>
14 #include <linux/ktime.h>
15 #include <linux/sched.h>
16 #include <linux/types.h>
17 #include <linux/init.h>
18 #include <linux/fs.h>
19
20 #include <asm/ftrace.h>
21
22 /*
23  * If the arch supports passing the variable contents of
24  * function_trace_op as the third parameter back from the
25  * mcount call, then the arch should define this as 1.
26  */
27 #ifndef ARCH_SUPPORTS_FTRACE_OPS
28 #define ARCH_SUPPORTS_FTRACE_OPS 0
29 #endif
30
31 /*
32  * If the arch's mcount caller does not support all of ftrace's
33  * features, then it must call an indirect function that
34  * does. Or at least does enough to prevent any unwelcomed side effects.
35  */
36 #if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \
37         !ARCH_SUPPORTS_FTRACE_OPS
38 # define FTRACE_FORCE_LIST_FUNC 1
39 #else
40 # define FTRACE_FORCE_LIST_FUNC 0
41 #endif
42
43
44 struct module;
45 struct ftrace_hash;
46
47 #ifdef CONFIG_FUNCTION_TRACER
48
49 extern int ftrace_enabled;
50 extern int
51 ftrace_enable_sysctl(struct ctl_table *table, int write,
52                      void __user *buffer, size_t *lenp,
53                      loff_t *ppos);
54
55 struct ftrace_ops;
56
57 typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip,
58                               struct ftrace_ops *op, struct pt_regs *regs);
59
60 /*
61  * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
62  * set in the flags member.
63  *
64  * ENABLED - set/unset when ftrace_ops is registered/unregistered
65  * DYNAMIC - set when ftrace_ops is registered to denote dynamically
66  *           allocated ftrace_ops which need special care
67  * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
68  *           could be controled by following calls:
69  *             ftrace_function_local_enable
70  *             ftrace_function_local_disable
71  * SAVE_REGS - The ftrace_ops wants regs saved at each function called
72  *            and passed to the callback. If this flag is set, but the
73  *            architecture does not support passing regs
74  *            (CONFIG_DYNAMIC_FTRACE_WITH_REGS is not defined), then the
75  *            ftrace_ops will fail to register, unless the next flag
76  *            is set.
77  * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the
78  *            handler can handle an arch that does not save regs
79  *            (the handler tests if regs == NULL), then it can set
80  *            this flag instead. It will not fail registering the ftrace_ops
81  *            but, the regs field will be NULL if the arch does not support
82  *            passing regs to the handler.
83  *            Note, if this flag is set, the SAVE_REGS flag will automatically
84  *            get set upon registering the ftrace_ops, if the arch supports it.
85  * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure
86  *            that the call back has its own recursion protection. If it does
87  *            not set this, then the ftrace infrastructure will add recursion
88  *            protection for the caller.
89  * STUB   - The ftrace_ops is just a place holder.
90  * INITIALIZED - The ftrace_ops has already been initialized (first use time
91  *            register_ftrace_function() is called, it will initialized the ops)
92  * DELETED - The ops are being deleted, do not let them be registered again.
93  */
94 enum {
95         FTRACE_OPS_FL_ENABLED                   = 1 << 0,
96         FTRACE_OPS_FL_DYNAMIC                   = 1 << 1,
97         FTRACE_OPS_FL_CONTROL                   = 1 << 2,
98         FTRACE_OPS_FL_SAVE_REGS                 = 1 << 3,
99         FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED    = 1 << 4,
100         FTRACE_OPS_FL_RECURSION_SAFE            = 1 << 5,
101         FTRACE_OPS_FL_STUB                      = 1 << 6,
102         FTRACE_OPS_FL_INITIALIZED               = 1 << 7,
103         FTRACE_OPS_FL_DELETED                   = 1 << 8,
104 };
105
106 /*
107  * Note, ftrace_ops can be referenced outside of RCU protection.
108  * (Although, for perf, the control ops prevent that). If ftrace_ops is
109  * allocated and not part of kernel core data, the unregistering of it will
110  * perform a scheduling on all CPUs to make sure that there are no more users.
111  * Depending on the load of the system that may take a bit of time.
112  *
113  * Any private data added must also take care not to be freed and if private
114  * data is added to a ftrace_ops that is in core code, the user of the
115  * ftrace_ops must perform a schedule_on_each_cpu() before freeing it.
116  */
117 struct ftrace_ops {
118         ftrace_func_t                   func;
119         struct ftrace_ops               *next;
120         unsigned long                   flags;
121         int __percpu                    *disabled;
122         void                            *private;
123 #ifdef CONFIG_DYNAMIC_FTRACE
124         struct ftrace_hash              *notrace_hash;
125         struct ftrace_hash              *filter_hash;
126         struct mutex                    regex_lock;
127 #endif
128 };
129
130 extern int function_trace_stop;
131
132 /*
133  * Type of the current tracing.
134  */
135 enum ftrace_tracing_type_t {
136         FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
137         FTRACE_TYPE_RETURN,     /* Hook the return of the function */
138 };
139
140 /* Current tracing type, default is FTRACE_TYPE_ENTER */
141 extern enum ftrace_tracing_type_t ftrace_tracing_type;
142
143 /**
144  * ftrace_stop - stop function tracer.
145  *
146  * A quick way to stop the function tracer. Note this an on off switch,
147  * it is not something that is recursive like preempt_disable.
148  * This does not disable the calling of mcount, it only stops the
149  * calling of functions from mcount.
150  */
151 static inline void ftrace_stop(void)
152 {
153         function_trace_stop = 1;
154 }
155
156 /**
157  * ftrace_start - start the function tracer.
158  *
159  * This function is the inverse of ftrace_stop. This does not enable
160  * the function tracing if the function tracer is disabled. This only
161  * sets the function tracer flag to continue calling the functions
162  * from mcount.
163  */
164 static inline void ftrace_start(void)
165 {
166         function_trace_stop = 0;
167 }
168
169 /*
170  * The ftrace_ops must be a static and should also
171  * be read_mostly.  These functions do modify read_mostly variables
172  * so use them sparely. Never free an ftrace_op or modify the
173  * next pointer after it has been registered. Even after unregistering
174  * it, the next pointer may still be used internally.
175  */
176 int register_ftrace_function(struct ftrace_ops *ops);
177 int unregister_ftrace_function(struct ftrace_ops *ops);
178 void clear_ftrace_function(void);
179
180 /**
181  * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
182  *
183  * This function enables tracing on current cpu by decreasing
184  * the per cpu control variable.
185  * It must be called with preemption disabled and only on ftrace_ops
186  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
187  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
188  */
189 static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
190 {
191         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
192                 return;
193
194         (*this_cpu_ptr(ops->disabled))--;
195 }
196
197 /**
198  * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
199  *
200  * This function enables tracing on current cpu by decreasing
201  * the per cpu control variable.
202  * It must be called with preemption disabled and only on ftrace_ops
203  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
204  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
205  */
206 static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
207 {
208         if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
209                 return;
210
211         (*this_cpu_ptr(ops->disabled))++;
212 }
213
214 /**
215  * ftrace_function_local_disabled - returns ftrace_ops disabled value
216  *                                  on current cpu
217  *
218  * This function returns value of ftrace_ops::disabled on current cpu.
219  * It must be called with preemption disabled and only on ftrace_ops
220  * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
221  * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
222  */
223 static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
224 {
225         WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
226         return *this_cpu_ptr(ops->disabled);
227 }
228
229 extern void ftrace_stub(unsigned long a0, unsigned long a1,
230                         struct ftrace_ops *op, struct pt_regs *regs);
231
232 #else /* !CONFIG_FUNCTION_TRACER */
233 /*
234  * (un)register_ftrace_function must be a macro since the ops parameter
235  * must not be evaluated.
236  */
237 #define register_ftrace_function(ops) ({ 0; })
238 #define unregister_ftrace_function(ops) ({ 0; })
239 static inline int ftrace_nr_registered_ops(void)
240 {
241         return 0;
242 }
243 static inline void clear_ftrace_function(void) { }
244 static inline void ftrace_kill(void) { }
245 static inline void ftrace_stop(void) { }
246 static inline void ftrace_start(void) { }
247 #endif /* CONFIG_FUNCTION_TRACER */
248
249 #ifdef CONFIG_STACK_TRACER
250 extern int stack_tracer_enabled;
251 int
252 stack_trace_sysctl(struct ctl_table *table, int write,
253                    void __user *buffer, size_t *lenp,
254                    loff_t *ppos);
255 #endif
256
257 struct ftrace_func_command {
258         struct list_head        list;
259         char                    *name;
260         int                     (*func)(struct ftrace_hash *hash,
261                                         char *func, char *cmd,
262                                         char *params, int enable);
263 };
264
265 #ifdef CONFIG_DYNAMIC_FTRACE
266
267 int ftrace_arch_code_modify_prepare(void);
268 int ftrace_arch_code_modify_post_process(void);
269
270 void ftrace_bug(int err, unsigned long ip);
271
272 struct seq_file;
273
274 struct ftrace_probe_ops {
275         void                    (*func)(unsigned long ip,
276                                         unsigned long parent_ip,
277                                         void **data);
278         int                     (*init)(struct ftrace_probe_ops *ops,
279                                         unsigned long ip, void **data);
280         void                    (*free)(struct ftrace_probe_ops *ops,
281                                         unsigned long ip, void **data);
282         int                     (*print)(struct seq_file *m,
283                                          unsigned long ip,
284                                          struct ftrace_probe_ops *ops,
285                                          void *data);
286 };
287
288 extern int
289 register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
290                               void *data);
291 extern void
292 unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
293                                 void *data);
294 extern void
295 unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
296 extern void unregister_ftrace_function_probe_all(char *glob);
297
298 extern int ftrace_text_reserved(const void *start, const void *end);
299
300 extern int ftrace_nr_registered_ops(void);
301
302 /*
303  * The dyn_ftrace record's flags field is split into two parts.
304  * the first part which is '0-FTRACE_REF_MAX' is a counter of
305  * the number of callbacks that have registered the function that
306  * the dyn_ftrace descriptor represents.
307  *
308  * The second part is a mask:
309  *  ENABLED - the function is being traced
310  *  REGS    - the record wants the function to save regs
311  *  REGS_EN - the function is set up to save regs.
312  *
313  * When a new ftrace_ops is registered and wants a function to save
314  * pt_regs, the rec->flag REGS is set. When the function has been
315  * set up to save regs, the REG_EN flag is set. Once a function
316  * starts saving regs it will do so until all ftrace_ops are removed
317  * from tracing that function.
318  */
319 enum {
320         FTRACE_FL_ENABLED       = (1UL << 29),
321         FTRACE_FL_REGS          = (1UL << 30),
322         FTRACE_FL_REGS_EN       = (1UL << 31)
323 };
324
325 #define FTRACE_FL_MASK          (0x7UL << 29)
326 #define FTRACE_REF_MAX          ((1UL << 29) - 1)
327
328 struct dyn_ftrace {
329         unsigned long           ip; /* address of mcount call-site */
330         unsigned long           flags;
331         struct dyn_arch_ftrace  arch;
332 };
333
334 int ftrace_force_update(void);
335 int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip,
336                          int remove, int reset);
337 int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
338                        int len, int reset);
339 int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
340                         int len, int reset);
341 void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
342 void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
343 void ftrace_free_filter(struct ftrace_ops *ops);
344
345 int register_ftrace_command(struct ftrace_func_command *cmd);
346 int unregister_ftrace_command(struct ftrace_func_command *cmd);
347
348 enum {
349         FTRACE_UPDATE_CALLS             = (1 << 0),
350         FTRACE_DISABLE_CALLS            = (1 << 1),
351         FTRACE_UPDATE_TRACE_FUNC        = (1 << 2),
352         FTRACE_START_FUNC_RET           = (1 << 3),
353         FTRACE_STOP_FUNC_RET            = (1 << 4),
354 };
355
356 /*
357  * The FTRACE_UPDATE_* enum is used to pass information back
358  * from the ftrace_update_record() and ftrace_test_record()
359  * functions. These are called by the code update routines
360  * to find out what is to be done for a given function.
361  *
362  *  IGNORE           - The function is already what we want it to be
363  *  MAKE_CALL        - Start tracing the function
364  *  MODIFY_CALL      - Stop saving regs for the function
365  *  MAKE_NOP         - Stop tracing the function
366  */
367 enum {
368         FTRACE_UPDATE_IGNORE,
369         FTRACE_UPDATE_MAKE_CALL,
370         FTRACE_UPDATE_MODIFY_CALL,
371         FTRACE_UPDATE_MAKE_NOP,
372 };
373
374 enum {
375         FTRACE_ITER_FILTER      = (1 << 0),
376         FTRACE_ITER_NOTRACE     = (1 << 1),
377         FTRACE_ITER_PRINTALL    = (1 << 2),
378         FTRACE_ITER_DO_HASH     = (1 << 3),
379         FTRACE_ITER_HASH        = (1 << 4),
380         FTRACE_ITER_ENABLED     = (1 << 5),
381 };
382
383 void arch_ftrace_update_code(int command);
384
385 struct ftrace_rec_iter;
386
387 struct ftrace_rec_iter *ftrace_rec_iter_start(void);
388 struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
389 struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
390
391 #define for_ftrace_rec_iter(iter)               \
392         for (iter = ftrace_rec_iter_start();    \
393              iter;                              \
394              iter = ftrace_rec_iter_next(iter))
395
396
397 int ftrace_update_record(struct dyn_ftrace *rec, int enable);
398 int ftrace_test_record(struct dyn_ftrace *rec, int enable);
399 void ftrace_run_stop_machine(int command);
400 unsigned long ftrace_location(unsigned long ip);
401 unsigned long ftrace_get_addr_new(struct dyn_ftrace *rec);
402 unsigned long ftrace_get_addr_curr(struct dyn_ftrace *rec);
403
404 extern ftrace_func_t ftrace_trace_function;
405
406 int ftrace_regex_open(struct ftrace_ops *ops, int flag,
407                   struct inode *inode, struct file *file);
408 ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
409                             size_t cnt, loff_t *ppos);
410 ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
411                              size_t cnt, loff_t *ppos);
412 int ftrace_regex_release(struct inode *inode, struct file *file);
413
414 void __init
415 ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
416
417 /* defined in arch */
418 extern int ftrace_ip_converted(unsigned long ip);
419 extern int ftrace_dyn_arch_init(void);
420 extern void ftrace_replace_code(int enable);
421 extern int ftrace_update_ftrace_func(ftrace_func_t func);
422 extern void ftrace_caller(void);
423 extern void ftrace_regs_caller(void);
424 extern void ftrace_call(void);
425 extern void ftrace_regs_call(void);
426 extern void mcount_call(void);
427
428 void ftrace_modify_all_code(int command);
429
430 #ifndef FTRACE_ADDR
431 #define FTRACE_ADDR ((unsigned long)ftrace_caller)
432 #endif
433
434 #ifndef FTRACE_REGS_ADDR
435 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
436 # define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller)
437 #else
438 # define FTRACE_REGS_ADDR FTRACE_ADDR
439 #endif
440 #endif
441
442 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
443 extern void ftrace_graph_caller(void);
444 extern int ftrace_enable_ftrace_graph_caller(void);
445 extern int ftrace_disable_ftrace_graph_caller(void);
446 #else
447 static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
448 static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
449 #endif
450
451 /**
452  * ftrace_make_nop - convert code into nop
453  * @mod: module structure if called by module load initialization
454  * @rec: the mcount call site record
455  * @addr: the address that the call site should be calling
456  *
457  * This is a very sensitive operation and great care needs
458  * to be taken by the arch.  The operation should carefully
459  * read the location, check to see if what is read is indeed
460  * what we expect it to be, and then on success of the compare,
461  * it should write to the location.
462  *
463  * The code segment at @rec->ip should be a caller to @addr
464  *
465  * Return must be:
466  *  0 on success
467  *  -EFAULT on error reading the location
468  *  -EINVAL on a failed compare of the contents
469  *  -EPERM  on error writing to the location
470  * Any other value will be considered a failure.
471  */
472 extern int ftrace_make_nop(struct module *mod,
473                            struct dyn_ftrace *rec, unsigned long addr);
474
475 /**
476  * ftrace_make_call - convert a nop call site into a call to addr
477  * @rec: the mcount call site record
478  * @addr: the address that the call site should call
479  *
480  * This is a very sensitive operation and great care needs
481  * to be taken by the arch.  The operation should carefully
482  * read the location, check to see if what is read is indeed
483  * what we expect it to be, and then on success of the compare,
484  * it should write to the location.
485  *
486  * The code segment at @rec->ip should be a nop
487  *
488  * Return must be:
489  *  0 on success
490  *  -EFAULT on error reading the location
491  *  -EINVAL on a failed compare of the contents
492  *  -EPERM  on error writing to the location
493  * Any other value will be considered a failure.
494  */
495 extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
496
497 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
498 /**
499  * ftrace_modify_call - convert from one addr to another (no nop)
500  * @rec: the mcount call site record
501  * @old_addr: the address expected to be currently called to
502  * @addr: the address to change to
503  *
504  * This is a very sensitive operation and great care needs
505  * to be taken by the arch.  The operation should carefully
506  * read the location, check to see if what is read is indeed
507  * what we expect it to be, and then on success of the compare,
508  * it should write to the location.
509  *
510  * The code segment at @rec->ip should be a caller to @old_addr
511  *
512  * Return must be:
513  *  0 on success
514  *  -EFAULT on error reading the location
515  *  -EINVAL on a failed compare of the contents
516  *  -EPERM  on error writing to the location
517  * Any other value will be considered a failure.
518  */
519 extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
520                               unsigned long addr);
521 #else
522 /* Should never be called */
523 static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
524                                      unsigned long addr)
525 {
526         return -EINVAL;
527 }
528 #endif
529
530 /* May be defined in arch */
531 extern int ftrace_arch_read_dyn_info(char *buf, int size);
532
533 extern int skip_trace(unsigned long ip);
534 extern void ftrace_module_init(struct module *mod);
535
536 extern void ftrace_disable_daemon(void);
537 extern void ftrace_enable_daemon(void);
538 #else /* CONFIG_DYNAMIC_FTRACE */
539 static inline int skip_trace(unsigned long ip) { return 0; }
540 static inline int ftrace_force_update(void) { return 0; }
541 static inline void ftrace_disable_daemon(void) { }
542 static inline void ftrace_enable_daemon(void) { }
543 static inline void ftrace_release_mod(struct module *mod) {}
544 static inline void ftrace_module_init(struct module *mod) {}
545 static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
546 {
547         return -EINVAL;
548 }
549 static inline __init int unregister_ftrace_command(char *cmd_name)
550 {
551         return -EINVAL;
552 }
553 static inline int ftrace_text_reserved(const void *start, const void *end)
554 {
555         return 0;
556 }
557 static inline unsigned long ftrace_location(unsigned long ip)
558 {
559         return 0;
560 }
561
562 /*
563  * Again users of functions that have ftrace_ops may not
564  * have them defined when ftrace is not enabled, but these
565  * functions may still be called. Use a macro instead of inline.
566  */
567 #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
568 #define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
569 #define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; })
570 #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
571 #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
572 #define ftrace_free_filter(ops) do { } while (0)
573
574 static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
575                             size_t cnt, loff_t *ppos) { return -ENODEV; }
576 static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
577                              size_t cnt, loff_t *ppos) { return -ENODEV; }
578 static inline int
579 ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
580 #endif /* CONFIG_DYNAMIC_FTRACE */
581
582 /* totally disable ftrace - can not re-enable after this */
583 void ftrace_kill(void);
584
585 static inline void tracer_disable(void)
586 {
587 #ifdef CONFIG_FUNCTION_TRACER
588         ftrace_enabled = 0;
589 #endif
590 }
591
592 /*
593  * Ftrace disable/restore without lock. Some synchronization mechanism
594  * must be used to prevent ftrace_enabled to be changed between
595  * disable/restore.
596  */
597 static inline int __ftrace_enabled_save(void)
598 {
599 #ifdef CONFIG_FUNCTION_TRACER
600         int saved_ftrace_enabled = ftrace_enabled;
601         ftrace_enabled = 0;
602         return saved_ftrace_enabled;
603 #else
604         return 0;
605 #endif
606 }
607
608 static inline void __ftrace_enabled_restore(int enabled)
609 {
610 #ifdef CONFIG_FUNCTION_TRACER
611         ftrace_enabled = enabled;
612 #endif
613 }
614
615 /* All archs should have this, but we define it for consistency */
616 #ifndef ftrace_return_address0
617 # define ftrace_return_address0 __builtin_return_address(0)
618 #endif
619
620 /* Archs may use other ways for ADDR1 and beyond */
621 #ifndef ftrace_return_address
622 # ifdef CONFIG_FRAME_POINTER
623 #  define ftrace_return_address(n) __builtin_return_address(n)
624 # else
625 #  define ftrace_return_address(n) 0UL
626 # endif
627 #endif
628
629 #define CALLER_ADDR0 ((unsigned long)ftrace_return_address0)
630 #define CALLER_ADDR1 ((unsigned long)ftrace_return_address(1))
631 #define CALLER_ADDR2 ((unsigned long)ftrace_return_address(2))
632 #define CALLER_ADDR3 ((unsigned long)ftrace_return_address(3))
633 #define CALLER_ADDR4 ((unsigned long)ftrace_return_address(4))
634 #define CALLER_ADDR5 ((unsigned long)ftrace_return_address(5))
635 #define CALLER_ADDR6 ((unsigned long)ftrace_return_address(6))
636
637 #ifdef CONFIG_IRQSOFF_TRACER
638   extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
639   extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
640 #else
641   static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
642   static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
643 #endif
644
645 #ifdef CONFIG_PREEMPT_TRACER
646   extern void trace_preempt_on(unsigned long a0, unsigned long a1);
647   extern void trace_preempt_off(unsigned long a0, unsigned long a1);
648 #else
649 /*
650  * Use defines instead of static inlines because some arches will make code out
651  * of the CALLER_ADDR, when we really want these to be a real nop.
652  */
653 # define trace_preempt_on(a0, a1) do { } while (0)
654 # define trace_preempt_off(a0, a1) do { } while (0)
655 #endif
656
657 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
658 extern void ftrace_init(void);
659 #else
660 static inline void ftrace_init(void) { }
661 #endif
662
663 /*
664  * Structure that defines an entry function trace.
665  */
666 struct ftrace_graph_ent {
667         unsigned long func; /* Current function */
668         int depth;
669 };
670
671 /*
672  * Structure that defines a return function trace.
673  */
674 struct ftrace_graph_ret {
675         unsigned long func; /* Current function */
676         unsigned long long calltime;
677         unsigned long long rettime;
678         /* Number of functions that overran the depth limit for current task */
679         unsigned long overrun;
680         int depth;
681 };
682
683 /* Type of the callback handlers for tracing function graph*/
684 typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
685 typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
686
687 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
688
689 /* for init task */
690 #define INIT_FTRACE_GRAPH               .ret_stack = NULL,
691
692 /*
693  * Stack of return addresses for functions
694  * of a thread.
695  * Used in struct thread_info
696  */
697 struct ftrace_ret_stack {
698         unsigned long ret;
699         unsigned long func;
700         unsigned long long calltime;
701         unsigned long long subtime;
702         unsigned long fp;
703 };
704
705 /*
706  * Primary handler of a function return.
707  * It relays on ftrace_return_to_handler.
708  * Defined in entry_32/64.S
709  */
710 extern void return_to_handler(void);
711
712 extern int
713 ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
714                          unsigned long frame_pointer);
715
716 /*
717  * Sometimes we don't want to trace a function with the function
718  * graph tracer but we want them to keep traced by the usual function
719  * tracer if the function graph tracer is not configured.
720  */
721 #define __notrace_funcgraph             notrace
722
723 /*
724  * We want to which function is an entrypoint of a hardirq.
725  * That will help us to put a signal on output.
726  */
727 #define __irq_entry              __attribute__((__section__(".irqentry.text")))
728
729 /* Limits of hardirq entrypoints */
730 extern char __irqentry_text_start[];
731 extern char __irqentry_text_end[];
732
733 #define FTRACE_NOTRACE_DEPTH 65536
734 #define FTRACE_RETFUNC_DEPTH 50
735 #define FTRACE_RETSTACK_ALLOC_SIZE 32
736 extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
737                                 trace_func_graph_ent_t entryfunc);
738
739 extern void ftrace_graph_stop(void);
740
741 /* The current handlers in use */
742 extern trace_func_graph_ret_t ftrace_graph_return;
743 extern trace_func_graph_ent_t ftrace_graph_entry;
744
745 extern void unregister_ftrace_graph(void);
746
747 extern void ftrace_graph_init_task(struct task_struct *t);
748 extern void ftrace_graph_exit_task(struct task_struct *t);
749 extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
750
751 static inline int task_curr_ret_stack(struct task_struct *t)
752 {
753         return t->curr_ret_stack;
754 }
755
756 static inline void pause_graph_tracing(void)
757 {
758         atomic_inc(&current->tracing_graph_pause);
759 }
760
761 static inline void unpause_graph_tracing(void)
762 {
763         atomic_dec(&current->tracing_graph_pause);
764 }
765 #else /* !CONFIG_FUNCTION_GRAPH_TRACER */
766
767 #define __notrace_funcgraph
768 #define __irq_entry
769 #define INIT_FTRACE_GRAPH
770
771 static inline void ftrace_graph_init_task(struct task_struct *t) { }
772 static inline void ftrace_graph_exit_task(struct task_struct *t) { }
773 static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
774
775 static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
776                           trace_func_graph_ent_t entryfunc)
777 {
778         return -1;
779 }
780 static inline void unregister_ftrace_graph(void) { }
781
782 static inline int task_curr_ret_stack(struct task_struct *tsk)
783 {
784         return -1;
785 }
786
787 static inline void pause_graph_tracing(void) { }
788 static inline void unpause_graph_tracing(void) { }
789 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
790
791 #ifdef CONFIG_TRACING
792
793 /* flags for current->trace */
794 enum {
795         TSK_TRACE_FL_TRACE_BIT  = 0,
796         TSK_TRACE_FL_GRAPH_BIT  = 1,
797 };
798 enum {
799         TSK_TRACE_FL_TRACE      = 1 << TSK_TRACE_FL_TRACE_BIT,
800         TSK_TRACE_FL_GRAPH      = 1 << TSK_TRACE_FL_GRAPH_BIT,
801 };
802
803 static inline void set_tsk_trace_trace(struct task_struct *tsk)
804 {
805         set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
806 }
807
808 static inline void clear_tsk_trace_trace(struct task_struct *tsk)
809 {
810         clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
811 }
812
813 static inline int test_tsk_trace_trace(struct task_struct *tsk)
814 {
815         return tsk->trace & TSK_TRACE_FL_TRACE;
816 }
817
818 static inline void set_tsk_trace_graph(struct task_struct *tsk)
819 {
820         set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
821 }
822
823 static inline void clear_tsk_trace_graph(struct task_struct *tsk)
824 {
825         clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
826 }
827
828 static inline int test_tsk_trace_graph(struct task_struct *tsk)
829 {
830         return tsk->trace & TSK_TRACE_FL_GRAPH;
831 }
832
833 enum ftrace_dump_mode;
834
835 extern enum ftrace_dump_mode ftrace_dump_on_oops;
836
837 extern void disable_trace_on_warning(void);
838 extern int __disable_trace_on_warning;
839
840 #ifdef CONFIG_PREEMPT
841 #define INIT_TRACE_RECURSION            .trace_recursion = 0,
842 #endif
843
844 #else /* CONFIG_TRACING */
845 static inline void  disable_trace_on_warning(void) { }
846 #endif /* CONFIG_TRACING */
847
848 #ifndef INIT_TRACE_RECURSION
849 #define INIT_TRACE_RECURSION
850 #endif
851
852 #ifdef CONFIG_FTRACE_SYSCALLS
853
854 unsigned long arch_syscall_addr(int nr);
855
856 #endif /* CONFIG_FTRACE_SYSCALLS */
857
858 #endif /* _LINUX_FTRACE_H */