]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/printk.h
mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
[karo-tx-linux.git] / include / linux / printk.h
1 #ifndef __KERNEL_PRINTK__
2 #define __KERNEL_PRINTK__
3
4 #include <stdarg.h>
5 #include <linux/init.h>
6 #include <linux/kern_levels.h>
7 #include <linux/linkage.h>
8 #include <linux/cache.h>
9
10 extern const char linux_banner[];
11 extern const char linux_proc_banner[];
12
13 #define PRINTK_MAX_SINGLE_HEADER_LEN 2
14
15 static inline int printk_get_level(const char *buffer)
16 {
17         if (buffer[0] == KERN_SOH_ASCII && buffer[1]) {
18                 switch (buffer[1]) {
19                 case '0' ... '7':
20                 case 'd':       /* KERN_DEFAULT */
21                 case 'c':       /* KERN_CONT */
22                         return buffer[1];
23                 }
24         }
25         return 0;
26 }
27
28 static inline const char *printk_skip_level(const char *buffer)
29 {
30         if (printk_get_level(buffer))
31                 return buffer + 2;
32
33         return buffer;
34 }
35
36 static inline const char *printk_skip_headers(const char *buffer)
37 {
38         while (printk_get_level(buffer))
39                 buffer = printk_skip_level(buffer);
40
41         return buffer;
42 }
43
44 #define CONSOLE_EXT_LOG_MAX     8192
45
46 /* printk's without a loglevel use this.. */
47 #define MESSAGE_LOGLEVEL_DEFAULT CONFIG_MESSAGE_LOGLEVEL_DEFAULT
48
49 /* We show everything that is MORE important than this.. */
50 #define CONSOLE_LOGLEVEL_SILENT  0 /* Mum's the word */
51 #define CONSOLE_LOGLEVEL_MIN     1 /* Minimum loglevel we let people use */
52 #define CONSOLE_LOGLEVEL_QUIET   4 /* Shhh ..., when booted with "quiet" */
53 #define CONSOLE_LOGLEVEL_DEBUG  10 /* issue debug messages */
54 #define CONSOLE_LOGLEVEL_MOTORMOUTH 15  /* You can't shut this one up */
55
56 /*
57  * Default used to be hard-coded at 7, we're now allowing it to be set from
58  * kernel config.
59  */
60 #define CONSOLE_LOGLEVEL_DEFAULT CONFIG_CONSOLE_LOGLEVEL_DEFAULT
61
62 extern int console_printk[];
63
64 #define console_loglevel (console_printk[0])
65 #define default_message_loglevel (console_printk[1])
66 #define minimum_console_loglevel (console_printk[2])
67 #define default_console_loglevel (console_printk[3])
68
69 static inline void console_silent(void)
70 {
71         console_loglevel = CONSOLE_LOGLEVEL_SILENT;
72 }
73
74 static inline void console_verbose(void)
75 {
76         if (console_loglevel)
77                 console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH;
78 }
79
80 /* strlen("ratelimit") + 1 */
81 #define DEVKMSG_STR_MAX_SIZE 10
82 extern char devkmsg_log_str[];
83 struct ctl_table;
84
85 struct va_format {
86         const char *fmt;
87         va_list *va;
88 };
89
90 /*
91  * FW_BUG
92  * Add this to a message where you are sure the firmware is buggy or behaves
93  * really stupid or out of spec. Be aware that the responsible BIOS developer
94  * should be able to fix this issue or at least get a concrete idea of the
95  * problem by reading your message without the need of looking at the kernel
96  * code.
97  *
98  * Use it for definite and high priority BIOS bugs.
99  *
100  * FW_WARN
101  * Use it for not that clear (e.g. could the kernel messed up things already?)
102  * and medium priority BIOS bugs.
103  *
104  * FW_INFO
105  * Use this one if you want to tell the user or vendor about something
106  * suspicious, but generally harmless related to the firmware.
107  *
108  * Use it for information or very low priority BIOS bugs.
109  */
110 #define FW_BUG          "[Firmware Bug]: "
111 #define FW_WARN         "[Firmware Warn]: "
112 #define FW_INFO         "[Firmware Info]: "
113
114 /*
115  * HW_ERR
116  * Add this to a message for hardware errors, so that user can report
117  * it to hardware vendor instead of LKML or software vendor.
118  */
119 #define HW_ERR          "[Hardware Error]: "
120
121 /*
122  * DEPRECATED
123  * Add this to a message whenever you want to warn user space about the use
124  * of a deprecated aspect of an API so they can stop using it
125  */
126 #define DEPRECATED      "[Deprecated]: "
127
128 /*
129  * Dummy printk for disabled debugging statements to use whilst maintaining
130  * gcc's format checking.
131  */
132 #define no_printk(fmt, ...)                             \
133 ({                                                      \
134         do {                                            \
135                 if (0)                                  \
136                         printk(fmt, ##__VA_ARGS__);     \
137         } while (0);                                    \
138         0;                                              \
139 })
140
141 #ifdef CONFIG_EARLY_PRINTK
142 extern asmlinkage __printf(1, 2)
143 void early_printk(const char *fmt, ...);
144 #else
145 static inline __printf(1, 2) __cold
146 void early_printk(const char *s, ...) { }
147 #endif
148
149 #ifdef CONFIG_PRINTK_NMI
150 extern void printk_nmi_enter(void);
151 extern void printk_nmi_exit(void);
152 #else
153 static inline void printk_nmi_enter(void) { }
154 static inline void printk_nmi_exit(void) { }
155 #endif /* PRINTK_NMI */
156
157 #ifdef CONFIG_PRINTK
158 asmlinkage __printf(5, 0)
159 int vprintk_emit(int facility, int level,
160                  const char *dict, size_t dictlen,
161                  const char *fmt, va_list args);
162
163 asmlinkage __printf(1, 0)
164 int vprintk(const char *fmt, va_list args);
165
166 asmlinkage __printf(5, 6) __cold
167 int printk_emit(int facility, int level,
168                 const char *dict, size_t dictlen,
169                 const char *fmt, ...);
170
171 asmlinkage __printf(1, 2) __cold
172 int printk(const char *fmt, ...);
173
174 /*
175  * Special printk facility for scheduler/timekeeping use only, _DO_NOT_USE_ !
176  */
177 __printf(1, 2) __cold int printk_deferred(const char *fmt, ...);
178
179 /*
180  * Please don't use printk_ratelimit(), because it shares ratelimiting state
181  * with all other unrelated printk_ratelimit() callsites.  Instead use
182  * printk_ratelimited() or plain old __ratelimit().
183  */
184 extern int __printk_ratelimit(const char *func);
185 #define printk_ratelimit() __printk_ratelimit(__func__)
186 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
187                                    unsigned int interval_msec);
188
189 extern int printk_delay_msec;
190 extern int dmesg_restrict;
191 extern int kptr_restrict;
192
193 extern int
194 devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, void __user *buf,
195                           size_t *lenp, loff_t *ppos);
196
197 extern void wake_up_klogd(void);
198
199 char *log_buf_addr_get(void);
200 u32 log_buf_len_get(void);
201 void log_buf_vmcoreinfo_setup(void);
202 void __init setup_log_buf(int early);
203 __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
204 void dump_stack_print_info(const char *log_lvl);
205 void show_regs_print_info(const char *log_lvl);
206 extern void printk_safe_init(void);
207 extern void printk_safe_flush(void);
208 extern void printk_safe_flush_on_panic(void);
209 #else
210 static inline __printf(1, 0)
211 int vprintk(const char *s, va_list args)
212 {
213         return 0;
214 }
215 static inline __printf(1, 2) __cold
216 int printk(const char *s, ...)
217 {
218         return 0;
219 }
220 static inline __printf(1, 2) __cold
221 int printk_deferred(const char *s, ...)
222 {
223         return 0;
224 }
225 static inline int printk_ratelimit(void)
226 {
227         return 0;
228 }
229 static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
230                                           unsigned int interval_msec)
231 {
232         return false;
233 }
234
235 static inline void wake_up_klogd(void)
236 {
237 }
238
239 static inline char *log_buf_addr_get(void)
240 {
241         return NULL;
242 }
243
244 static inline u32 log_buf_len_get(void)
245 {
246         return 0;
247 }
248
249 static inline void log_buf_vmcoreinfo_setup(void)
250 {
251 }
252
253 static inline void setup_log_buf(int early)
254 {
255 }
256
257 static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
258 {
259 }
260
261 static inline void dump_stack_print_info(const char *log_lvl)
262 {
263 }
264
265 static inline void show_regs_print_info(const char *log_lvl)
266 {
267 }
268
269 static inline void printk_safe_init(void)
270 {
271 }
272
273 static inline void printk_safe_flush(void)
274 {
275 }
276
277 static inline void printk_safe_flush_on_panic(void)
278 {
279 }
280 #endif
281
282 extern asmlinkage void dump_stack(void) __cold;
283
284 #ifndef pr_fmt
285 #define pr_fmt(fmt) fmt
286 #endif
287
288 /*
289  * These can be used to print at the various log levels.
290  * All of these will print unconditionally, although note that pr_debug()
291  * and other debug macros are compiled out unless either DEBUG is defined
292  * or CONFIG_DYNAMIC_DEBUG is set.
293  */
294 #define pr_emerg(fmt, ...) \
295         printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
296 #define pr_alert(fmt, ...) \
297         printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
298 #define pr_crit(fmt, ...) \
299         printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
300 #define pr_err(fmt, ...) \
301         printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
302 #define pr_warning(fmt, ...) \
303         printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
304 #define pr_warn pr_warning
305 #define pr_notice(fmt, ...) \
306         printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
307 #define pr_info(fmt, ...) \
308         printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
309 /*
310  * Like KERN_CONT, pr_cont() should only be used when continuing
311  * a line with no newline ('\n') enclosed. Otherwise it defaults
312  * back to KERN_DEFAULT.
313  */
314 #define pr_cont(fmt, ...) \
315         printk(KERN_CONT fmt, ##__VA_ARGS__)
316
317 /* pr_devel() should produce zero code unless DEBUG is defined */
318 #ifdef DEBUG
319 #define pr_devel(fmt, ...) \
320         printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
321 #else
322 #define pr_devel(fmt, ...) \
323         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
324 #endif
325
326
327 /* If you are writing a driver, please use dev_dbg instead */
328 #if defined(CONFIG_DYNAMIC_DEBUG)
329 #include <linux/dynamic_debug.h>
330
331 /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
332 #define pr_debug(fmt, ...) \
333         dynamic_pr_debug(fmt, ##__VA_ARGS__)
334 #elif defined(DEBUG)
335 #define pr_debug(fmt, ...) \
336         printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
337 #else
338 #define pr_debug(fmt, ...) \
339         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
340 #endif
341
342 /*
343  * Print a one-time message (analogous to WARN_ONCE() et al):
344  */
345
346 #ifdef CONFIG_PRINTK
347 #define printk_once(fmt, ...)                                   \
348 ({                                                              \
349         static bool __print_once __read_mostly;                 \
350         bool __ret_print_once = !__print_once;                  \
351                                                                 \
352         if (!__print_once) {                                    \
353                 __print_once = true;                            \
354                 printk(fmt, ##__VA_ARGS__);                     \
355         }                                                       \
356         unlikely(__ret_print_once);                             \
357 })
358 #define printk_deferred_once(fmt, ...)                          \
359 ({                                                              \
360         static bool __print_once __read_mostly;                 \
361         bool __ret_print_once = !__print_once;                  \
362                                                                 \
363         if (!__print_once) {                                    \
364                 __print_once = true;                            \
365                 printk_deferred(fmt, ##__VA_ARGS__);            \
366         }                                                       \
367         unlikely(__ret_print_once);                             \
368 })
369 #else
370 #define printk_once(fmt, ...)                                   \
371         no_printk(fmt, ##__VA_ARGS__)
372 #define printk_deferred_once(fmt, ...)                          \
373         no_printk(fmt, ##__VA_ARGS__)
374 #endif
375
376 #define pr_emerg_once(fmt, ...)                                 \
377         printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
378 #define pr_alert_once(fmt, ...)                                 \
379         printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
380 #define pr_crit_once(fmt, ...)                                  \
381         printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
382 #define pr_err_once(fmt, ...)                                   \
383         printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
384 #define pr_warn_once(fmt, ...)                                  \
385         printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
386 #define pr_notice_once(fmt, ...)                                \
387         printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
388 #define pr_info_once(fmt, ...)                                  \
389         printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
390 #define pr_cont_once(fmt, ...)                                  \
391         printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
392
393 #if defined(DEBUG)
394 #define pr_devel_once(fmt, ...)                                 \
395         printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
396 #else
397 #define pr_devel_once(fmt, ...)                                 \
398         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
399 #endif
400
401 /* If you are writing a driver, please use dev_dbg instead */
402 #if defined(DEBUG)
403 #define pr_debug_once(fmt, ...)                                 \
404         printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
405 #else
406 #define pr_debug_once(fmt, ...)                                 \
407         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
408 #endif
409
410 /*
411  * ratelimited messages with local ratelimit_state,
412  * no local ratelimit_state used in the !PRINTK case
413  */
414 #ifdef CONFIG_PRINTK
415 #define printk_ratelimited(fmt, ...)                                    \
416 ({                                                                      \
417         static DEFINE_RATELIMIT_STATE(_rs,                              \
418                                       DEFAULT_RATELIMIT_INTERVAL,       \
419                                       DEFAULT_RATELIMIT_BURST);         \
420                                                                         \
421         if (__ratelimit(&_rs))                                          \
422                 printk(fmt, ##__VA_ARGS__);                             \
423 })
424 #else
425 #define printk_ratelimited(fmt, ...)                                    \
426         no_printk(fmt, ##__VA_ARGS__)
427 #endif
428
429 #define pr_emerg_ratelimited(fmt, ...)                                  \
430         printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
431 #define pr_alert_ratelimited(fmt, ...)                                  \
432         printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
433 #define pr_crit_ratelimited(fmt, ...)                                   \
434         printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
435 #define pr_err_ratelimited(fmt, ...)                                    \
436         printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
437 #define pr_warn_ratelimited(fmt, ...)                                   \
438         printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
439 #define pr_notice_ratelimited(fmt, ...)                                 \
440         printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
441 #define pr_info_ratelimited(fmt, ...)                                   \
442         printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
443 /* no pr_cont_ratelimited, don't do that... */
444
445 #if defined(DEBUG)
446 #define pr_devel_ratelimited(fmt, ...)                                  \
447         printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
448 #else
449 #define pr_devel_ratelimited(fmt, ...)                                  \
450         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
451 #endif
452
453 /* If you are writing a driver, please use dev_dbg instead */
454 #if defined(CONFIG_DYNAMIC_DEBUG)
455 /* descriptor check is first to prevent flooding with "callbacks suppressed" */
456 #define pr_debug_ratelimited(fmt, ...)                                  \
457 do {                                                                    \
458         static DEFINE_RATELIMIT_STATE(_rs,                              \
459                                       DEFAULT_RATELIMIT_INTERVAL,       \
460                                       DEFAULT_RATELIMIT_BURST);         \
461         DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, pr_fmt(fmt));         \
462         if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) &&        \
463             __ratelimit(&_rs))                                          \
464                 __dynamic_pr_debug(&descriptor, pr_fmt(fmt), ##__VA_ARGS__);    \
465 } while (0)
466 #elif defined(DEBUG)
467 #define pr_debug_ratelimited(fmt, ...)                                  \
468         printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
469 #else
470 #define pr_debug_ratelimited(fmt, ...) \
471         no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
472 #endif
473
474 extern const struct file_operations kmsg_fops;
475
476 enum {
477         DUMP_PREFIX_NONE,
478         DUMP_PREFIX_ADDRESS,
479         DUMP_PREFIX_OFFSET
480 };
481 extern int hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
482                               int groupsize, char *linebuf, size_t linebuflen,
483                               bool ascii);
484 #ifdef CONFIG_PRINTK
485 extern void print_hex_dump(const char *level, const char *prefix_str,
486                            int prefix_type, int rowsize, int groupsize,
487                            const void *buf, size_t len, bool ascii);
488 #if defined(CONFIG_DYNAMIC_DEBUG)
489 #define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
490         dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
491 #else
492 extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
493                                  const void *buf, size_t len);
494 #endif /* defined(CONFIG_DYNAMIC_DEBUG) */
495 #else
496 static inline void print_hex_dump(const char *level, const char *prefix_str,
497                                   int prefix_type, int rowsize, int groupsize,
498                                   const void *buf, size_t len, bool ascii)
499 {
500 }
501 static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
502                                         const void *buf, size_t len)
503 {
504 }
505
506 #endif
507
508 #if defined(CONFIG_DYNAMIC_DEBUG)
509 #define print_hex_dump_debug(prefix_str, prefix_type, rowsize,  \
510                              groupsize, buf, len, ascii)        \
511         dynamic_hex_dump(prefix_str, prefix_type, rowsize,      \
512                          groupsize, buf, len, ascii)
513 #elif defined(DEBUG)
514 #define print_hex_dump_debug(prefix_str, prefix_type, rowsize,          \
515                              groupsize, buf, len, ascii)                \
516         print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize,    \
517                        groupsize, buf, len, ascii)
518 #else
519 static inline void print_hex_dump_debug(const char *prefix_str, int prefix_type,
520                                         int rowsize, int groupsize,
521                                         const void *buf, size_t len, bool ascii)
522 {
523 }
524 #endif
525
526 #endif