Merge tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux

[karo-tx-linux.git] / arch / arm64 / boot / dts / amlogic / meson-gxl-s905x-libretech-cc.dts

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 890821d6e52b2d01a00e06d03ded2b49e091857a..266fbcf3e47f5640b565c09fae289003b7b9e679 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -10,12 +10,20 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x-p212.dtsi"
+#include "meson-gxl-s905x.dtsi"
 
 / {
        compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
        model = "Libre Technology CC";
 
+       aliases {
+               serial0 = &uart_AO;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
        cvbs-connector {
                compatible = "composite-video-connector";
 
@@ -26,6 +34,11 @@
                };
        };
 
+       emmc_pwrseq: emmc-pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+       };
+
        hdmi-connector {
                compatible = "hdmi-connector";
                type = "a";
@@ -53,6 +66,39 @@
                        linux,default-trigger = "heartbeat";
                };
        };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x0 0x0 0x80000000>;
+       };
+
+       vcc_3v3: regulator-vcc_3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "VCC_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       vcc_card: regulator-vcc-card {
+               compatible = "regulator-gpio";
+
+               regulator-name = "VCC_CARD";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+               gpios-states = <0>;
+
+               states = <3300000 0>,
+                        <1800000 1>;
+       };
+
+       vddio_boot: regulator-vddio_boot {
+               compatible = "regulator-fixed";
+               regulator-name = "VDDIO_BOOT";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
 };
 
 &cvbs_vdac_port {
@@ -61,6 +107,16 @@
        };
 };
 
+&ethmac {
+       status = "okay";
+};
+
+&ir {
+       status = "okay";
+       pinctrl-0 = <&remote_input_ao_pins>;
+       pinctrl-names = "default";
+};
+
 &hdmi_tx {
        status = "okay";
        pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -73,20 +129,43 @@
        };
 };
 
-/*
- * The following devices exists but are exposed on the general
- * purpose GPIO header. End user may well decide to use those pins
- * for another purpose
- */
+/* SD card */
+&sd_emmc_b {
+       status = "okay";
+       pinctrl-0 = <&sdcard_pins>;
+       pinctrl-names = "default";
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       max-frequency = <100000000>;
+       disable-wp;
+
+       cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+       cd-inverted;
 
-&sd_emmc_a {
-       status = "disabled";
+       vmmc-supply = <&vcc_3v3>;
+       vqmmc-supply = <&vcc_card>;
 };
 
-&uart_A {
-       status = "disabled";
+/* eMMC */
+&sd_emmc_c {
+       status = "okay";
+       pinctrl-0 = <&emmc_pins>;
+       pinctrl-names = "default";
+
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       max-frequency = <50000000>;
+       non-removable;
+       disable-wp;
+
+       mmc-pwrseq = <&emmc_pwrseq>;
+       vmmc-supply = <&vcc_3v3>;
+       vqmmc-supply = <&vddio_boot>;
 };
 
-&wifi32k {
-       status = "disabled";
+&uart_AO {
+       status = "okay";
+       pinctrl-0 = <&uart_ao_a_pins>;
+       pinctrl-names = "default";
 };