if (find_rdev_nr(mddev, rdev->desc_nr))
return -EBUSY;
}
+ if (mddev->max_disks && rdev->desc_nr >= mddev->max_disks) {
+ printk(KERN_WARNING "md: %s: array is limited to %d devices\n",
+ mdname(mddev), mddev->max_disks);
+ return -EBUSY;
+ }
bdevname(rdev->bdev,b);
while ( (s=strchr(b, '/')) != NULL)
*s = '!';
if (strict_strtoull(buf, 10, &size) < 0)
return -EINVAL;
- if (size < my_mddev->size)
- return -EINVAL;
if (my_mddev->pers && rdev->raid_disk >= 0) {
if (my_mddev->persistent) {
size = super_types[my_mddev->major_version].
size = (rdev->bdev->bd_inode->i_size >> 10);
size -= rdev->data_offset/2;
}
- if (size < my_mddev->size)
- return -EINVAL; /* component must fit device */
}
+ if (size < my_mddev->size)
+ return -EINVAL; /* component must fit device */
rdev->size = size;
if (size > oldsize && my_mddev->external) {
i = 0;
rdev_for_each(rdev, tmp, mddev) {
+ if (rdev->desc_nr >= mddev->max_disks ||
+ i > mddev->max_disks) {
+ printk(KERN_WARNING
+ "md: %s: %s: only %d devices permitted\n",
+ mdname(mddev), bdevname(rdev->bdev, b),
+ mddev->max_disks);
+ kick_rdev_from_array(rdev);
+ continue;
+ }
if (rdev != freshest)
if (super_types[mddev->major_version].
validate_super(mddev, rdev)) {
}
+static void md_safemode_timeout(unsigned long data);
+
static ssize_t
safe_delay_show(mddev_t *mddev, char *page)
{
if (msec == 0)
mddev->safemode_delay = 0;
else {
+ unsigned long old_delay = mddev->safemode_delay;
mddev->safemode_delay = (msec*HZ)/1000;
if (mddev->safemode_delay == 0)
mddev->safemode_delay = 1;
+ if (mddev->safemode_delay < old_delay)
+ md_safemode_timeout((unsigned long)mddev);
}
return len;
}
break;
case read_auto:
if (mddev->pers) {
- if (mddev->ro != 1)
+ if (mddev->ro == 0)
err = do_md_stop(mddev, 1, 0);
- else
+ else if (mddev->ro == 1)
err = restart_array(mddev);
if (err == 0) {
mddev->ro = 2;
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
- } else {
- mddev->ro = 0;
- mddev->recovery_cp = MaxSector;
- err = do_md_run(mddev);
- }
+ } else
+ err = -EINVAL;
break;
case active:
if (mddev->pers) {
{
int major, minor;
char *e;
- if (!list_empty(&mddev->disks))
+ /* Changing the details of 'external' metadata is
+ * always permitted. Otherwise there must be
+ * no devices attached to the array.
+ */
+ if (mddev->external && strncmp(buf, "external:", 9) == 0)
+ ;
+ else if (!list_empty(&mddev->disks))
return -EBUSY;
if (cmd_match(buf, "none")) {
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
char *e;
unsigned long long new = simple_strtoull(buf, &e, 10);
- if (mddev->pers->quiesce == NULL)
+ if (mddev->pers == NULL ||
+ mddev->pers->quiesce == NULL)
return -EINVAL;
if (buf == e || (*e && *e != '\n'))
return -EINVAL;
del_timer_sync(&mddev->safemode_timer);
- invalidate_partition(disk, 0);
-
switch(mode) {
case 1: /* readonly */
err = -ENXIO;
* noticed in interrupt contexts ...
*/
- if (rdev->desc_nr == mddev->max_disks) {
- printk(KERN_WARNING "%s: can not hot-add to full array!\n",
- mdname(mddev));
- err = -EBUSY;
- goto abort_unbind_export;
- }
-
rdev->raid_disk = -1;
md_update_sb(mddev, 1);
md_new_event(mddev);
return 0;
-abort_unbind_export:
- unbind_rdev_from_array(rdev);
-
abort_export:
export_rdev(rdev);
return err;
*/
if (mddev->sync_thread)
return -EBUSY;
+ if (mddev->bitmap)
+ /* Sorry, cannot grow a bitmap yet, just remove it,
+ * grow, and re-add.
+ */
+ return -EBUSY;
rdev_for_each(rdev, tmp, mddev) {
sector_t avail;
avail = rdev->size * 2;
* time 'round when curr_resync == 2
*/
continue;
- prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+ /* We need to wait 'interruptible' so as not to
+ * contribute to the load average, and not to
+ * be caught by 'softlockup'
+ */
+ prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
+ if (signal_pending(current))
+ flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
}
}
- if (mddev->degraded) {
+ if (mddev->degraded && ! mddev->ro) {
rdev_for_each(rdev, rtmp, mddev) {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
flush_signals(current);
}
+ if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+ return;
if ( ! (
(mddev->flags && !mddev->external) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
if (mddev_trylock(mddev)) {
int spares = 0;
+ if (mddev->ro) {
+ /* Only thing we do on a ro array is remove
+ * failed devices.
+ */
+ remove_and_add_spares(mddev);
+ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ goto unlock;
+ }
+
if (!mddev->external) {
int did_change = 0;
spin_lock_irq(&mddev->write_lock);
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+ !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
/* activate any spares */
if (mddev->pers->spare_active(mddev))
} else if ((spares = remove_and_add_spares(mddev))) {
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (mddev->recovery_cp < MaxSector) {
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
for_each_mddev(mddev, tmp)
if (mddev_trylock(mddev)) {
- do_md_stop (mddev, 1, 0);
+ /* Force a switch to readonly even array
+ * appears to still be in use. Hence
+ * the '100'.
+ */
+ do_md_stop (mddev, 1, 100);
mddev_unlock(mddev);
}
/*
projects / karo-tx-linux.git / blobdiff