#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
-#define FSMC_NAND_BW8 1
-#define FSMC_NAND_BW16 2
-
-#define FSMC_MAX_NOR_BANKS 4
-#define FSMC_MAX_NAND_BANKS 4
-
-#define FSMC_FLASH_WIDTH8 1
-#define FSMC_FLASH_WIDTH16 2
-
/* fsmc controller registers for NOR flash */
#define CTRL 0x0
/* ctrl register definitions */
};
/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @nand_timings: timing setup for the physical NAND interface
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * @select_bank: callback to select a certain bank, this is
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
+ * struct fsmc_nand_data - structure for FSMC NAND device state
+ *
+ * @pid: Part ID on the AMBA PrimeCell format
+ * @mtd: MTD info for a NAND flash.
+ * @nand: Chip related info for a NAND flash.
+ * @partitions: Partition info for a NAND Flash.
+ * @nr_partitions: Total number of partition of a NAND flash.
+ *
+ * @bank: Bank number for probed device.
+ * @clk: Clock structure for FSMC.
+ *
+ * @read_dma_chan: DMA channel for read access
+ * @write_dma_chan: DMA channel for write access to NAND
+ * @dma_access_complete: Completion structure
+ *
+ * @data_pa: NAND Physical port for Data.
+ * @data_va: NAND port for Data.
+ * @cmd_va: NAND port for Command.
+ * @addr_va: NAND port for Address.
+ * @regs_va: FSMC regs base address.
*/
-struct fsmc_nand_platform_data {
- struct fsmc_nand_timings *nand_timings;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
- unsigned int options;
- unsigned int width;
- unsigned int bank;
+struct fsmc_nand_data {
+ u32 pid;
+ struct nand_chip nand;
+ unsigned int bank;
+ struct device *dev;
enum access_mode mode;
+ struct clk *clk;
- void (*select_bank)(uint32_t bank, uint32_t busw);
+ /* DMA related objects */
+ struct dma_chan *read_dma_chan;
+ struct dma_chan *write_dma_chan;
+ struct completion dma_access_complete;
- /* priv structures for dma accesses */
- void *read_dma_priv;
- void *write_dma_priv;
+ struct fsmc_nand_timings *dev_timings;
+
+ dma_addr_t data_pa;
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ void __iomem *regs_va;
};
static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
.free = fsmc_ecc4_ooblayout_free,
};
-/**
- * struct fsmc_nand_data - structure for FSMC NAND device state
- *
- * @pid: Part ID on the AMBA PrimeCell format
- * @mtd: MTD info for a NAND flash.
- * @nand: Chip related info for a NAND flash.
- * @partitions: Partition info for a NAND Flash.
- * @nr_partitions: Total number of partition of a NAND flash.
- *
- * @bank: Bank number for probed device.
- * @clk: Clock structure for FSMC.
- *
- * @read_dma_chan: DMA channel for read access
- * @write_dma_chan: DMA channel for write access to NAND
- * @dma_access_complete: Completion structure
- *
- * @data_pa: NAND Physical port for Data.
- * @data_va: NAND port for Data.
- * @cmd_va: NAND port for Command.
- * @addr_va: NAND port for Address.
- * @regs_va: FSMC regs base address.
- */
-struct fsmc_nand_data {
- u32 pid;
- struct nand_chip nand;
- struct mtd_partition *partitions;
- unsigned int nr_partitions;
-
- unsigned int bank;
- struct device *dev;
- enum access_mode mode;
- struct clk *clk;
-
- /* DMA related objects */
- struct dma_chan *read_dma_chan;
- struct dma_chan *write_dma_chan;
- struct completion dma_access_complete;
-
- struct fsmc_nand_timings *dev_timings;
-
- dma_addr_t data_pa;
- void __iomem *data_va;
- void __iomem *cmd_va;
- void __iomem *addr_va;
- void __iomem *regs_va;
-
- void (*select_chip)(uint32_t bank, uint32_t busw);
-};
-
static inline struct fsmc_nand_data *mtd_to_fsmc(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct fsmc_nand_data, nand);
}
-/* Assert CS signal based on chipnr */
-static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct fsmc_nand_data *host;
-
- host = mtd_to_fsmc(mtd);
-
- switch (chipnr) {
- case -1:
- chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
- break;
- case 0:
- case 1:
- case 2:
- case 3:
- if (host->select_chip)
- host->select_chip(chipnr,
- chip->options & NAND_BUSWIDTH_16);
- break;
-
- default:
- dev_err(host->dev, "unsupported chip-select %d\n", chipnr);
- }
-}
-
/*
* fsmc_cmd_ctrl - For facilitaing Hardware access
* This routine allows hardware specific access to control-lines(ALE,CLE)
}
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
- struct device_node *np)
+ struct fsmc_nand_data *host,
+ struct nand_chip *nand)
{
- struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
u32 val;
int ret;
- /* Set default NAND width to 8 bits */
- pdata->width = 8;
+ nand->options = 0;
+
if (!of_property_read_u32(np, "bank-width", &val)) {
if (val == 2) {
- pdata->width = 16;
+ nand->options |= NAND_BUSWIDTH_16;
} else if (val != 1) {
dev_err(&pdev->dev, "invalid bank-width %u\n", val);
return -EINVAL;
}
}
+
if (of_get_property(np, "nand-skip-bbtscan", NULL))
- pdata->options = NAND_SKIP_BBTSCAN;
+ nand->options |= NAND_SKIP_BBTSCAN;
- pdata->nand_timings = devm_kzalloc(&pdev->dev,
- sizeof(*pdata->nand_timings), GFP_KERNEL);
- if (!pdata->nand_timings)
+ host->dev_timings = devm_kzalloc(&pdev->dev,
+ sizeof(*host->dev_timings), GFP_KERNEL);
+ if (!host->dev_timings)
return -ENOMEM;
- ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
- sizeof(*pdata->nand_timings));
+ ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings,
+ sizeof(*host->dev_timings));
if (ret) {
dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
- pdata->nand_timings = NULL;
+ host->dev_timings = NULL;
}
/* Set default NAND bank to 0 */
- pdata->bank = 0;
+ host->bank = 0;
if (!of_property_read_u32(np, "bank", &val)) {
if (val > 3) {
dev_err(&pdev->dev, "invalid bank %u\n", val);
return -EINVAL;
}
- pdata->bank = val;
+ host->bank = val;
}
return 0;
}
*/
static int __init fsmc_nand_probe(struct platform_device *pdev)
{
- struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct device_node __maybe_unused *np = pdev->dev.of_node;
struct fsmc_nand_data *host;
struct mtd_info *mtd;
struct nand_chip *nand;
u32 pid;
int i;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- pdev->dev.platform_data = pdata;
- ret = fsmc_nand_probe_config_dt(pdev, np);
- if (ret) {
- dev_err(&pdev->dev, "no platform data\n");
- return -ENODEV;
- }
-
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
if (!host)
return -ENOMEM;
+ nand = &host->nand;
+
+ ret = fsmc_nand_probe_config_dt(pdev, host, nand);
+ if (ret)
+ return ret;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
host->data_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->data_va))
if (IS_ERR(host->regs_va))
return PTR_ERR(host->regs_va);
- host->clk = clk_get(&pdev->dev, NULL);
+ host->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "failed to fetch block clock\n");
return PTR_ERR(host->clk);
ret = clk_prepare_enable(host->clk);
if (ret)
- goto err_clk_prepare_enable;
+ return ret;
/*
* This device ID is actually a common AMBA ID as used on the
AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
- host->bank = pdata->bank;
- host->select_chip = pdata->select_bank;
- host->partitions = pdata->partitions;
- host->nr_partitions = pdata->nr_partitions;
host->dev = &pdev->dev;
- host->dev_timings = pdata->nand_timings;
- host->mode = pdata->mode;
if (host->mode == USE_DMA_ACCESS)
init_completion(&host->dma_access_complete);
/* Link all private pointers */
mtd = nand_to_mtd(&host->nand);
- nand = &host->nand;
nand_set_controller_data(nand, host);
- nand_set_flash_node(nand, np);
+ nand_set_flash_node(nand, pdev->dev.of_node);
mtd->dev.parent = &pdev->dev;
nand->IO_ADDR_R = host->data_va;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
- nand->options = pdata->options;
- nand->select_chip = fsmc_select_chip;
nand->badblockbits = 7;
- nand_set_flash_node(nand, np);
-
- if (pdata->width == FSMC_NAND_BW16)
- nand->options |= NAND_BUSWIDTH_16;
switch (host->mode) {
case USE_DMA_ACCESS:
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
- host->read_dma_chan = dma_request_channel(mask, filter,
- pdata->read_dma_priv);
+ host->read_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->read_dma_chan) {
dev_err(&pdev->dev, "Unable to get read dma channel\n");
goto err_req_read_chnl;
}
- host->write_dma_chan = dma_request_channel(mask, filter,
- pdata->write_dma_priv);
+ host->write_dma_chan = dma_request_channel(mask, filter, NULL);
if (!host->write_dma_chan) {
dev_err(&pdev->dev, "Unable to get write dma channel\n");
goto err_req_write_chnl;
if (ret)
goto err_probe;
- /*
- * The partition information can is accessed by (in the same precedence)
- *
- * command line through Bootloader,
- * platform data,
- * default partition information present in driver.
- */
- /*
- * Check for partition info passed
- */
mtd->name = "nand";
- ret = mtd_device_register(mtd, host->partitions, host->nr_partitions);
+ ret = mtd_device_register(mtd, NULL, 0);
if (ret)
goto err_probe;
dma_release_channel(host->read_dma_chan);
err_req_read_chnl:
clk_disable_unprepare(host->clk);
-err_clk_prepare_enable:
- clk_put(host->clk);
return ret;
}
dma_release_channel(host->read_dma_chan);
}
clk_disable_unprepare(host->clk);
- clk_put(host->clk);
}
return 0;
static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
-#ifdef CONFIG_OF
static const struct of_device_id fsmc_nand_id_table[] = {
{ .compatible = "st,spear600-fsmc-nand" },
{ .compatible = "stericsson,fsmc-nand" },
{}
};
MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
-#endif
static struct platform_driver fsmc_nand_driver = {
.remove = fsmc_nand_remove,
.driver = {
.name = "fsmc-nand",
- .of_match_table = of_match_ptr(fsmc_nand_id_table),
+ .of_match_table = fsmc_nand_id_table,
.pm = &fsmc_nand_pm_ops,
},
};
projects / karo-tx-linux.git / blobdiff