#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
+#include <linux/property.h>
#include <linux/export.h>
#include <linux/sched/rt.h>
+#include <uapi/linux/sched/types.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/ioport.h>
proxy->controller_data = chip->controller_data;
proxy->controller_state = NULL;
- status = spi_add_device(proxy);
- if (status < 0) {
- spi_dev_put(proxy);
- return NULL;
+ if (chip->properties) {
+ status = device_add_properties(&proxy->dev, chip->properties);
+ if (status) {
+ dev_err(&master->dev,
+ "failed to add properties to '%s': %d\n",
+ chip->modalias, status);
+ goto err_dev_put;
+ }
}
+ status = spi_add_device(proxy);
+ if (status < 0)
+ goto err_remove_props;
+
return proxy;
+
+err_remove_props:
+ if (chip->properties)
+ device_remove_properties(&proxy->dev);
+err_dev_put:
+ spi_dev_put(proxy);
+ return NULL;
}
EXPORT_SYMBOL_GPL(spi_new_device);
if (!spi)
return;
- if (spi->dev.of_node)
+ if (spi->dev.of_node) {
of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
+ of_node_put(spi->dev.of_node);
+ }
if (ACPI_COMPANION(&spi->dev))
acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
device_unregister(&spi->dev);
*
* The board info passed can safely be __initdata ... but be careful of
* any embedded pointers (platform_data, etc), they're copied as-is.
+ * Device properties are deep-copied though.
*
* Return: zero on success, else a negative error code.
*/
int i;
if (!n)
- return -EINVAL;
+ return 0;
- bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
+ bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
if (!bi)
return -ENOMEM;
struct spi_master *master;
memcpy(&bi->board_info, info, sizeof(*info));
+ if (info->properties) {
+ bi->board_info.properties =
+ property_entries_dup(info->properties);
+ if (IS_ERR(bi->board_info.properties))
+ return PTR_ERR(bi->board_info.properties);
+ }
+
mutex_lock(&board_lock);
list_add_tail(&bi->list, &board_list);
list_for_each_entry(master, &spi_master_list, list)
if (master->dma_tx)
tx_dev = master->dma_tx->device->dev;
else
- tx_dev = &master->dev;
+ tx_dev = master->dev.parent;
if (master->dma_rx)
rx_dev = master->dma_rx->device->dev;
else
- rx_dev = &master->dev;
+ rx_dev = master->dev.parent;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (!master->can_dma(master, msg->spi, xfer))
if (master->dma_tx)
tx_dev = master->dma_tx->device->dev;
else
- tx_dev = &master->dev;
+ tx_dev = master->dev.parent;
if (master->dma_rx)
rx_dev = master->dma_rx->device->dev;
else
- rx_dev = &master->dev;
+ rx_dev = master->dev.parent;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
if (!master->can_dma(master, msg->spi, xfer))
ret = 0;
ms = 8LL * 1000LL * xfer->len;
do_div(ms, xfer->speed_hz);
- ms += ms + 100; /* some tolerance */
+ ms += ms + 200; /* some tolerance */
if (ms > UINT_MAX)
ms = UINT_MAX;
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OF)
-static struct spi_device *
-of_register_spi_device(struct spi_master *master, struct device_node *nc)
+static int of_spi_parse_dt(struct spi_master *master, struct spi_device *spi,
+ struct device_node *nc)
{
- struct spi_device *spi;
- int rc;
u32 value;
-
- /* Alloc an spi_device */
- spi = spi_alloc_device(master);
- if (!spi) {
- dev_err(&master->dev, "spi_device alloc error for %s\n",
- nc->full_name);
- rc = -ENOMEM;
- goto err_out;
- }
-
- /* Select device driver */
- rc = of_modalias_node(nc, spi->modalias,
- sizeof(spi->modalias));
- if (rc < 0) {
- dev_err(&master->dev, "cannot find modalias for %s\n",
- nc->full_name);
- goto err_out;
- }
+ int rc;
/* Device address */
rc = of_property_read_u32(nc, "reg", &value);
if (rc) {
dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
nc->full_name, rc);
- goto err_out;
+ return rc;
}
spi->chip_select = value;
if (rc) {
dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
nc->full_name, rc);
- goto err_out;
+ return rc;
}
spi->max_speed_hz = value;
+ return 0;
+}
+
+static struct spi_device *
+of_register_spi_device(struct spi_master *master, struct device_node *nc)
+{
+ struct spi_device *spi;
+ int rc;
+
+ /* Alloc an spi_device */
+ spi = spi_alloc_device(master);
+ if (!spi) {
+ dev_err(&master->dev, "spi_device alloc error for %s\n",
+ nc->full_name);
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ /* Select device driver */
+ rc = of_modalias_node(nc, spi->modalias,
+ sizeof(spi->modalias));
+ if (rc < 0) {
+ dev_err(&master->dev, "cannot find modalias for %s\n",
+ nc->full_name);
+ goto err_out;
+ }
+
+ rc = of_spi_parse_dt(master, spi, nc);
+ if (rc)
+ goto err_out;
+
/* Store a pointer to the node in the device structure */
of_node_get(nc);
spi->dev.of_node = nc;
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
nc->full_name);
- goto err_out;
+ goto err_of_node_put;
}
return spi;
+err_of_node_put:
+ of_node_put(nc);
err_out:
spi_dev_put(spi);
return ERR_PTR(rc);
return AE_OK;
}
+ acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
+ sizeof(spi->modalias));
+
if (spi->irq < 0)
spi->irq = acpi_dev_gpio_irq_get(adev, 0);
acpi_device_set_enumerated(adev);
adev->power.flags.ignore_parent = true;
- strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
if (spi_add_device(spi)) {
adev->power.flags.ignore_parent = false;
dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
mutex_lock(&master->bus_lock_mutex);
mutex_lock(&master->io_mutex);
- if (master->dma_rx) {
+ if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
rx_dev = master->dma_rx->device->dev;
ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
msg->buf, msg->len,
projects / karo-tx-linux.git / blobdiff