#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
/*
* Constants for ECC_MODES
*/
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_ON_DIE,
} nand_ecc_modes_t;
enum nand_ecc_algo {
/* Vendor-specific feature address (Micron) */
#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
*/
} __packed;
-struct nand_onfi_vendor_micron {
- u8 two_plane_read;
- u8 read_cache;
- u8 read_unique_id;
- u8 dq_imped;
- u8 dq_imped_num_settings;
- u8 dq_imped_feat_addr;
- u8 rb_pulldown_strength;
- u8 rb_pulldown_strength_feat_addr;
- u8 rb_pulldown_strength_num_settings;
- u8 otp_mode;
- u8 otp_page_start;
- u8 otp_data_prot_addr;
- u8 otp_num_pages;
- u8 otp_feat_addr;
- u8 read_retry_options;
- u8 reserved[72];
- u8 param_revision;
-} __packed;
-
struct jedec_ecc_info {
u8 ecc_bits;
u8 codeword_size;
__le16 crc;
} __packed;
+/**
+ * struct nand_id - NAND id structure
+ * @data: buffer containing the id bytes. Currently 8 bytes large, but can
+ * be extended if required.
+ * @len: ID length.
+ */
+struct nand_id {
+ u8 data[8];
+ int len;
+};
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
- * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
+ * any single ECC step, -EIO hw error
* @read_subpage: function to read parts of the page covered by ECC;
* returns same as read_page()
* @write_subpage: function to write parts of the page covered by ECC.
return &conf->timings.sdr;
}
+/**
+ * struct nand_manufacturer_ops - NAND Manufacturer operations
+ * @detect: detect the NAND memory organization and capabilities
+ * @init: initialize all vendor specific fields (like the ->read_retry()
+ * implementation) if any.
+ * @cleanup: the ->init() function may have allocated resources, ->cleanup()
+ * is here to let vendor specific code release those resources.
+ */
+struct nand_manufacturer_ops {
+ void (*detect)(struct nand_chip *chip);
+ int (*init)(struct nand_chip *chip);
+ void (*cleanup)(struct nand_chip *chip);
+};
+
/**
* struct nand_chip - NAND Private Flash Chip Data
* @mtd: MTD device registered to the MTD framework
* setting the read-retry mode. Mostly needed for MLC NAND.
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
+ * @buf_align: minimum buffer alignment required by a platform
* @hwcontrol: platform-specific hardware control structure
* @erase: [REPLACEABLE] erase function
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @pagebuf_bitflips: [INTERN] holds the bitflip count for the page which is
* currently in data_buf.
* @subpagesize: [INTERN] holds the subpagesize
+ * @id: [INTERN] holds NAND ID
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
* @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
* @errstat: [OPTIONAL] hardware specific function to perform
* additional error status checks (determine if errors are
* correctable).
- * @write_page: [REPLACEABLE] High-level page write function
+ * @manufacturer: [INTERN] Contains manufacturer information
*/
struct nand_chip {
int (*scan_bbt)(struct mtd_info *mtd);
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
- int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offset, int data_len, const uint8_t *buf,
- int oob_required, int page, int cached, int raw);
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
int chip_delay;
int badblockpos;
int badblockbits;
+ struct nand_id id;
int onfi_version;
int jedec_version;
union {
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
+ unsigned long buf_align;
struct nand_hw_control hwcontrol;
uint8_t *bbt;
struct nand_bbt_descr *badblock_pattern;
void *priv;
+
+ struct {
+ const struct nand_manufacturer *desc;
+ void *priv;
+ } manufacturer;
};
extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
chip->priv = priv;
}
+static inline void nand_set_manufacturer_data(struct nand_chip *chip,
+ void *priv)
+{
+ chip->manufacturer.priv = priv;
+}
+
+static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
+{
+ return chip->manufacturer.priv;
+}
+
/*
* NAND Flash Manufacturer ID Codes
*/
};
/**
- * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * struct nand_manufacturer - NAND Flash Manufacturer structure
* @name: Manufacturer name
* @id: manufacturer ID code of device.
+ * @ops: manufacturer operations
*/
-struct nand_manufacturers {
+struct nand_manufacturer {
int id;
char *name;
+ const struct nand_manufacturer_ops *ops;
};
+const struct nand_manufacturer *nand_get_manufacturer(u8 id);
+
+static inline const char *
+nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
+{
+ return manufacturer ? manufacturer->name : "Unknown";
+}
+
extern struct nand_flash_dev nand_flash_ids[];
-extern struct nand_manufacturers nand_manuf_ids[];
+
+extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
+extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
+extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
+extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
+extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
int nand_default_bbt(struct mtd_info *mtd);
int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page);
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);
/* Free resources held by the NAND device */
void nand_cleanup(struct nand_chip *chip);
+/* Default extended ID decoding function */
+void nand_decode_ext_id(struct nand_chip *chip);
#endif /* __LINUX_MTD_NAND_H */
projects / karo-tx-linux.git / blobdiff