X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-linux.git;a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fimx6ul-tx6ul.dtsi;h=7371661d3a3aa8953bece874bf72ad70a4289726;hp=ec745eb3b6a853b1aab6eb7faab14c30e68bcdf7;hb=66b5957f211cafa409e1820276fa7ea4c6a9521b;hpb=19c6e12c07ceab2ff5d5ec97354b893ab386c41c diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index ec745eb3b6a8..7371661d3a3a 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2015 Lothar Waßmann + * Copyright 2015-2017 Lothar Waßmann * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -47,7 +47,7 @@ aliases { can0 = &can2; can1 = &can1; - display = &display; + display = &lcdif; i2c0 = &i2c2; i2c1 = &i2c_gpio; i2c2 = &i2c1; @@ -85,10 +85,10 @@ backlight: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_rst>; - enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pinctrl_lcd_pwr>; + enable-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>; - power-supply = <®_lcd_pwr>; + power-supply = <®_3v3>; /* * a poor man's way to create a 1:1 relationship between * the PWM value and the actual duty cycle @@ -127,6 +127,22 @@ }; }; + lcd-panel { + compatible = "edt,etm0700g0dh6"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_rst>; + enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + backlight = <&backlight>; + bus-format-override = "rgb24"; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -176,19 +192,6 @@ gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; }; - reg_lcd_pwr: regulator-lcdpwr { - compatible = "regulator-fixed"; - regulator-name = "LCD POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwr>; - gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - reg_usbh1_vbus: regulator-usbh1vbus { compatible = "regulator-fixed"; regulator-name = "usbh1_vbus"; @@ -308,6 +311,7 @@ pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-post-delay = <10>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -357,8 +361,11 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; clock-frequency = <400000>; status = "okay"; @@ -420,127 +427,129 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_disp0_1>; - lcd-supply = <®_lcd_pwr>; - display = <&display>; status = "okay"; - display: display@di0 { - bits-per-pixel = <32>; - bus-width = <24>; - status = "okay"; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; - display-timings { - VGA { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <48>; - hsync-len = <96>; - hfront-porch = <16>; - vback-porch = <31>; - vsync-len = <2>; - vfront-porch = <12>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ETV570 { - clock-frequency = <25200000>; - hactive = <640>; - vactive = <480>; - hback-porch = <114>; - hsync-len = <30>; - hfront-porch = <16>; - vback-porch = <32>; - vsync-len = <3>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ETV570 { + u-boot,panel-name = "edt,et057090dhu"; + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ET0350 { - clock-frequency = <6413760>; - hactive = <320>; - vactive = <240>; - hback-porch = <34>; - hsync-len = <34>; - hfront-porch = <20>; - vback-porch = <15>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ET0350 { + u-boot,panel-name = "edt,et0350g0dh6"; + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ET0430 { - clock-frequency = <9009000>; - hactive = <480>; - vactive = <272>; - hback-porch = <2>; - hsync-len = <41>; - hfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - vfront-porch = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + ET0430 { + u-boot,panel-name = "edt,et0430g0dh6"; + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; - ET0500 { - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ET0700 { /* same as ET0500 */ - clock-frequency = <33264000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hsync-len = <128>; - hfront-porch = <40>; - vback-porch = <33>; - vsync-len = <2>; - vfront-porch = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ET0700 { /* same timing as ET0500 */ + u-boot,panel-name = "edt,etm0700g0dh6"; + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; - ETQ570 { - clock-frequency = <6596040>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hsync-len = <30>; - hfront-porch = <30>; - vback-porch = <16>; - vsync-len = <3>; - vfront-porch = <4>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; }; }; }; @@ -709,7 +718,7 @@ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x000b0 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40000018 >; }; @@ -722,7 +731,7 @@ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x000b0 MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0 MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x400000b1 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40000018 >; }; @@ -817,6 +826,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2-gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x4001b0b9 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x4001b0b9 + >; + }; + pinctrl_kpp: kppgrp { fsl,pins = < MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x1b0b0