ARM: dts: imx6ul: add support for TXUL-8013

The TXUL-8013 is a Computer On Module manufactured by
  Ka-Ro electronics GmbH with the following characteristics:
  Processor    Freescale i.MX 6ULL MCIMX6Y2, 528 MHz
  RAM          256MB 16-bit DDR3 SDRAM
  ROM          4GB eMMC
  Power supply Single 3.3 to 5V
  Size         26mm SO-DIMM
  Temp. Range  -40°C to 85°C

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7167bcce9b5c9c9b35b7375add15c..6d25253b2c74d166d158f18b54d54660727d6443 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -475,7 +475,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
        imx6ul-tx6ul-0010.dtb \
        imx6ul-tx6ul-0011.dtb \
        imx6ul-tx6ul-mainboard.dtb \
        imx6ul-tx6ul-0010.dtb \
        imx6ul-tx6ul-0011.dtb \
        imx6ul-tx6ul-mainboard.dtb \

-       imx6ull-14x14-evk.dtb
+       imx6ull-14x14-evk.dtb \
+       imx6ull-txul-8013.dtb

 dtb-$(CONFIG_SOC_IMX7D) += \
        imx7d-cl-som-imx7.dtb \
        imx7d-colibri-eval-v3.dtb \
 dtb-$(CONFIG_SOC_IMX7D) += \
        imx7d-cl-som-imx7.dtb \
        imx7d-colibri-eval-v3.dtb \

diff --git a/arch/arm/boot/dts/imx6ull-txul-8013.dts b/arch/arm/boot/dts/imx6ull-txul-8013.dts
new file mode 100644 (file)
index 0000000..34af49b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-txul-8013.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+       model = "Ka-Ro electronics TXUL-8013 Module";
+       compatible = "karo,imx6ull-txul", "fsl,imx6ull";
+
+       aliases {
+               /* make eMMC first mmc block device */
+               mmc0 = &usdhc2;
+               mmc1 = &usdhc1;
+       };
+};
+
+&gpmi {
+       status = "disabled";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       bus-width = <4>;
+       no-1-8-v;
+       non-removable;
+       fsl,wp-controller;
+       status = "okay";
+};