]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
USB: ftdi_sio: correct ST Micro Connect Lite PIDs
authorAdrian Thomasset <adrian.thomasset@st.com>
Tue, 23 Apr 2013 11:46:29 +0000 (12:46 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 8 May 2013 03:08:17 +0000 (20:08 -0700)
commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream.

The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB
UART FTDI chip. It is also possible to drive STM reference targets
populated with an on-board JTAG debugger based on the FT2232H chip with
the same STMicroelectronics tools.

For this reason, the ST Micro Connect Lite PIDs should be
ST_STMCLT_2232_PID: 0x3746
ST_STMCLT_4232_PID: 0x3747

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio_ids.h

index 8f9f80e4d42185851caa4e347ef7a6a60390ef7e..8c57de25c3fca607f5fdb4e4f13868f015de424b 100644 (file)
@@ -871,7 +871,9 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
        { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-       { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+       { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
+               .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+       { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
                .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
        { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
        { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
index 3c003512f60a44b5d7b1fc12eea1a4636ac2a891..98528270c43c21f5f8d66ccf594a269b32f0600f 100644 (file)
  * STMicroelectonics
  */
 #define ST_VID                 0x0483
-#define ST_STMCLT1030_PID      0x3747 /* ST Micro Connect Lite STMCLT1030 */
+#define ST_STMCLT_2232_PID     0x3746
+#define ST_STMCLT_4232_PID     0x3747
 
 /*
  * Papouch products (http://www.papouch.com/)