}
static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+ .set_clock = sdhci_set_clock,
.enable_dma = sdhci_acpi_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
};
static const struct sdhci_ops sdhci_acpi_ops_int = {
+ .set_clock = sdhci_set_clock,
.enable_dma = sdhci_acpi_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
}
static struct sdhci_ops sdhci_bcm_kona_ops = {
+ .set_clock = sdhci_set_clock,
.get_max_clock = sdhci_bcm_kona_get_max_clk,
.get_timeout_clock = sdhci_bcm_kona_get_timeout_clock,
.platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks,
.read_l = bcm2835_sdhci_readl,
.read_w = bcm2835_sdhci_readw,
.read_b = bcm2835_sdhci_readb,
+ .set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_min_clock = bcm2835_sdhci_get_min_clock,
.set_bus_width = sdhci_set_bus_width,
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
- SDHCI_QUIRK_NONSTANDARD_CLOCK,
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
static int sdhci_cns3xxx_probe(struct platform_device *pdev)
static const struct sdhci_ops sdhci_dove_ops = {
.read_w = sdhci_dove_readw,
.read_l = sdhci_dove_readl,
+ .set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
};
#define ESDHC_DEFAULT_QUIRKS (SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
SDHCI_QUIRK_NO_BUSY_IRQ | \
- SDHCI_QUIRK_NONSTANDARD_CLOCK | \
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
SDHCI_QUIRK_PIO_NEEDS_DELAY)
}
static struct sdhci_ops sdhci_arasan_ops = {
+ .set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_arasan_get_timeout_clock,
.set_bus_width = sdhci_set_bus_width,
.write_l = sdhci_hlwd_writel,
.write_w = sdhci_hlwd_writew,
.write_b = sdhci_hlwd_writeb,
+ .set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
};
}
static const struct sdhci_ops sdhci_pci_ops = {
+ .set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_pci_set_bus_width,
.reset = sdhci_reset,
EXPORT_SYMBOL_GPL(sdhci_pltfm_clk_get_max_clock);
static const struct sdhci_ops sdhci_pltfm_ops = {
+ .set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
};
}
static const struct sdhci_ops pxav2_sdhci_ops = {
+ .set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = pxav2_mmc_set_bus_width,
.reset = pxav2_reset,
}
static const struct sdhci_ops pxav3_sdhci_ops = {
+ .set_clock = sdhci_set_clock,
.set_uhs_signaling = pxav3_set_uhs_signaling,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
unsigned long clk_rates[MAX_BUS_CLK];
+
+ bool no_divider;
};
/**
*/
struct sdhci_s3c_drv_data {
unsigned int sdhci_quirks;
+ bool no_divider;
};
static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
* If controller uses a non-standard clock division, find the best clock
* speed possible with selected clock source and skip the division.
*/
- if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+ if (ourhost->no_divider) {
rate = clk_round_rate(clksrc, wanted);
return wanted - rate;
}
host->mmc->actual_clock = 0;
/* don't bother if the clock is going off. */
- if (clock == 0)
+ if (clock == 0) {
+ sdhci_set_clock(host, clock);
return;
+ }
for (src = 0; src < MAX_BUS_CLK; src++) {
delta = sdhci_s3c_consider_clock(ourhost, src, clock);
if (clock < 25 * 1000000)
ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+ sdhci_set_clock(host, clock);
}
/**
/* Setup quirks for the controller */
host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
- if (drv_data)
+ if (drv_data) {
host->quirks |= drv_data->sdhci_quirks;
+ sc->no_divider = drv_data->no_divider;
+ }
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
* If controller does not have internal clock divider,
* we can use overriding functions instead of default.
*/
- if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+ if (sc->no_divider) {
sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
- .sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK,
+ .no_divider = true,
};
#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
#else
}
static struct sdhci_ops sdhci_sirf_ops = {
+ .set_clock = sdhci_set_clock,
.get_max_clock = sdhci_sirf_get_max_clk,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
/* sdhci ops */
static const struct sdhci_ops sdhci_pltfm_ops = {
+ .set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
};
.read_l = tegra_sdhci_readl,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
+ .set_clock = sdhci_set_clock,
.set_bus_width = tegra_sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
};
return preset;
}
-static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
int div = 0; /* Initialized for compiler warning */
int real_div = div, clk_mul = 1;
u16 clk = 0;
unsigned long timeout;
- if (host->ops->set_clock) {
- host->ops->set_clock(host, clock);
- if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
- return;
- }
-
host->mmc->actual_clock = 0;
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
+EXPORT_SYMBOL_GPL(sdhci_set_clock);
static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
{
sdhci_enable_preset_value(host, false);
if (!ios->clock || ios->clock != host->clock) {
- sdhci_set_clock(host, ios->clock);
+ host->ops->set_clock(host, ios->clock);
host->clock = ios->clock;
}
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/* Re-enable SD Clock */
- sdhci_set_clock(host, host->clock);
+ host->ops->set_clock(host, host->clock);
}
}
/* Re-enable SD Clock */
- sdhci_set_clock(host, host->clock);
+ host->ops->set_clock(host, host->clock);
} else
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/* Some controllers need this kick or reset won't work here */
if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
/* This is to force an update */
- sdhci_set_clock(host, host->clock);
+ host->ops->set_clock(host, host->clock);
/* Spec says we should do both at the same time, but Ricoh
controllers do not like that. */
return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
}
+void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
-/* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
/* Controller has to be forced to use block size of 2048 bytes */
projects / karo-tx-linux.git / commitdiff