ARM: dts: imx53-tx53: fix interrupt flags

Some interrupts properties are given '0' as the flags argument or no
flags argument at all.
Change them to use the appropriate interrupt flags.

diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index aa9ae84d265962123975ad1c2506d14f56ddbfbf..eb5b452699a9581d94e50f0a04737c1d66a3c025 100644 (file)
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -254,7 +254,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_tsc2007>;
                interrupt-parent = <&gpio3>;
-               interrupts = <26 0>;
+               interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
                gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
                ti,x-plate-ohms = <660>;
                wakeup-source;

diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8e10c4757770d30d49b61222c53151b65d1f0c66..71b58b6933e1d7fb57cfe90b97b1232d8b8efaed 100644 (file)
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -227,7 +227,7 @@
 
        phy0: ethernet-phy@0 {
                interrupt-parent = <&gpio2>;
-               interrupts = <4>;
+               interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
                device_type = "ethernet-phy";
        };
 };
@@ -247,7 +247,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_ds1339>;
                interrupt-parent = <&gpio4>;
-               interrupts = <20 0>;
+               interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
                trickle-resistor-ohms = <250>;
                trickle-diode-disable;
        };