ARM: dts: Phytec imx6q pfla02 and pbab01 support

Add support for imx6q Phytec phyFLEX-i.MX6 Quad (aka pfla02 and pbab01).
 - Module pfla02
 - Carrier-Board pbab01

Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4ed1b1106967b84b1b279030d051af35e1edca99..b3a86613c6027de004cd746c55e30190509f38bb 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
        imx6dl-sabresd.dtb \
        imx6dl-wandboard.dtb \
        imx6q-arm2.dtb \
+       imx6q-phytec-pbab01.dtb \
        imx6q-sabreauto.dtb \
        imx6q-sabrelite.dtb \
        imx6q-sabresd.dtb \

diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
new file mode 100644 (file)
index 0000000..7d37ec6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+
+/ {
+       model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
+       compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+};
+
+&fec {
+       status = "okay";
+};
+
+&uart4 {
+       status = "okay";
+};
+
+&usdhc2 {
+       status = "okay";
+};
+
+&usdhc3 {
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
new file mode 100644 (file)
index 0000000..f5e1981
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6q.dtsi"
+
+/ {
+       model = "Phytec phyFLEX-i.MX6 Ouad";
+       compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+       memory {
+               reg = <0x10000000 0x80000000>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       hog {
+               pinctrl_hog: hoggrp {
+                       fsl,pins = <
+                               MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
+                       >;
+               };
+       };
+
+       pfla02 {
+               pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
+                       fsl,pins = <
+                               MX6Q_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
+                               MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
+                       >;
+               };
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet_3>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio3 23 0>;
+       status = "disabled";
+};
+
+&uart4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart4_1>;
+       status = "disabled";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2_2>;
+       cd-gpios = <&gpio1 4 0>;
+       wp-gpios = <&gpio1 2 0>;
+       status = "disabled";
+};
+
+&usdhc3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usdhc3_2
+                    &pinctrl_usdhc3_pfla02>;
+        cd-gpios = <&gpio1 27 0>;
+        wp-gpios = <&gpio1 29 0>;
+        status = "disabled";
+};