]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
mlxsw: spectrum_router: Fix NULL pointer dereference
authorIdo Schimmel <idosch@mellanox.com>
Wed, 28 Jun 2017 06:03:12 +0000 (09:03 +0300)
committerDavid S. Miller <davem@davemloft.net>
Thu, 29 Jun 2017 16:59:48 +0000 (12:59 -0400)
In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.

If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.

To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Petr Machata <petrm@mellanox.com>
Tested-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c

index 9f89c4137d2137f78bcda8f79a918b8db61a5189..0744452a0b188190a1da2fe0e14651aad31748de 100644 (file)
@@ -3334,6 +3334,9 @@ static int mlxsw_sp_inetaddr_vlan_event(struct net_device *vlan_dev,
        struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(vlan_dev);
        u16 vid = vlan_dev_vlan_id(vlan_dev);
 
+       if (netif_is_bridge_port(vlan_dev))
+               return 0;
+
        if (mlxsw_sp_port_dev_check(real_dev))
                return mlxsw_sp_inetaddr_vport_event(vlan_dev, real_dev, event,
                                                     vid);