Say N here unless you know what you are doing.
config LOWMEM_CAM_NUM
+ depends on FSL_BOOKE
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
default 3
bus-frequency = <0>; /* Fixed by bootwrapper */
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <0x12 0x2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; /* 32 bytes */
cache-size = <0x40000>; /* L2, 256K */
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#size-cells = <1>;
reg = <0xf0010100 0x60>;
- ranges = <0x0 0x0 0xfe000000 0x800000
+ ranges = <0x0 0x0 0xff800000 0x800000
0x1 0x0 0xf4500000 0x8000
0x8 0x0 0xf8200000 0x8000>;
};
};
- pci@f0010800 {
+ pci0: pci@f0010800 {
device_type = "pci";
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
reg = <0x119f0 0x10 0x115f0 0x10>;
};
- serial@11a00 {
+ serial0: serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
fsl,cpm-command = <0x800000>;
};
- serial@11a20 {
+ serial1: serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
fsl,cpm-command = <0x4a00000>;
};
- ethernet@11320 {
+ enet0: ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
fsl,cpm-command = <0x16200300>;
};
- ethernet@11340 {
+ enet1: ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
compatible = "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8548-memory-controller";
+ compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <0x12 0x2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8548-l2-cache-controller";
+ compatible = "fsl,mpc8548-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
clock-frequency = <0>;
memory-controller@2000 {
- compatible = "fsl,8560-memory-controller";
+ compatible = "fsl,mpc8560-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <0x12 0x2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8560-l2-cache-controller";
+ compatible = "fsl,mpc8560-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
soc8544@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
+ device_type = "soc";
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
compatible = "fsl,mpc8560-immr", "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
compatible = "fsl,mpc8540-immr", "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
compatible = "fsl,mpc8541-immr", "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
compatible = "fsl,mpc8555-immr", "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
compatible = "fsl,mpc8560-immr", "simple-bus";
memory-controller@2000 {
- compatible = "fsl,8540-memory-controller";
+ compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
- compatible = "fsl,8540-l2-cache-controller";
+ compatible = "fsl,mpc8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
#define MPIC_GREG_FEATURE_1 0x00010
#define MPIC_GREG_GLOBAL_CONF_0 0x00020
#define MPIC_GREG_GCONF_RESET 0x80000000
+/* On the FSL mpic implementations the Mode field is expand to be
+ * 2 bits wide:
+ * 0b00 = pass through (interrupts routed to IRQ0)
+ * 0b01 = Mixed mode
+ * 0b10 = reserved
+ * 0b11 = External proxy / coreint
+ */
+#define MPIC_GREG_GCONF_COREINT 0x60000000
#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000
#define MPIC_GREG_GCONF_NO_BIAS 0x10000000
#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff
#define MPIC_BROKEN_FRR_NIRQS 0x00000800
/* Destination only supports a single CPU at a time */
#define MPIC_SINGLE_DEST_CPU 0x00001000
+/* Enable CoreInt delivery of interrupts */
+#define MPIC_ENABLE_COREINT 0x00002000
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
extern unsigned int mpic_get_one_irq(struct mpic *mpic);
/* This one gets from the primary mpic */
extern unsigned int mpic_get_irq(void);
+/* This one gets from the primary mpic via CoreInt*/
+extern unsigned int mpic_get_coreint_irq(void);
/* Fetch Machine Check interrupt from primary mpic */
extern unsigned int mpic_get_mcirq(void);
#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
#define FPSCR_RN 0x00000003 /* FPU rounding control */
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
+#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
+#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
+#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
+#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
+#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
+#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
+#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
+#define SPEFSCR_OV 0x00004000 /* Integer overflow */
+#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
+#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
+#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
+#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
+#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
+#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
+#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
+
/* Special Purpose Registers (SPRNs)*/
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DSCR 0x11
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
-#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
-#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
-#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
-#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
-#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
-#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
-#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
-#define SPEFSCR_OV 0x00004000 /* Integer overflow */
-#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
-#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
-#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
-#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
-#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
-#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
-#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
-
/*
* The IBM-403 is an even more odd special case, as it is much
* older than the IBM-405 series. We put these down here incase someone
/* basic word size definitions */
#define _FP_W_TYPE_SIZE 32
-#define _FP_W_TYPE unsigned long
-#define _FP_WS_TYPE signed long
-#define _FP_I_TYPE long
+#define _FP_W_TYPE unsigned int
+#define _FP_WS_TYPE signed int
+#define _FP_I_TYPE int
#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
mb();
}
+ /* CoreInt */
+ if (flags & MPIC_ENABLE_COREINT)
+ mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+ mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+ | MPIC_GREG_GCONF_COREINT);
+
if (flags & MPIC_ENABLE_MCK)
mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
return mpic_get_one_irq(mpic);
}
+unsigned int mpic_get_coreint_irq(void)
+{
+#ifdef CONFIG_BOOKE
+ struct mpic *mpic = mpic_primary;
+ u32 src;
+
+ BUG_ON(mpic == NULL);
+
+ src = mfspr(SPRN_EPR);
+
+ if (unlikely(src == mpic->spurious_vec)) {
+ if (mpic->flags & MPIC_SPV_EOI)
+ mpic_eoi(mpic);
+ return NO_IRQ;
+ }
+ if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "%s: Got protected source %d !\n",
+ mpic->name, (int)src);
+ return NO_IRQ;
+ }
+
+ return irq_linear_revmap(mpic->irqhost, src);
+#else
+ return NO_IRQ;
+#endif
+}
+
unsigned int mpic_get_mcirq(void)
{
struct mpic *mpic = mpic_primary;
for (i = 0; i < NUM_GPIOS; i++)
pinfo->gpios[i] = of_get_gpio(np, i);
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+ udbg_putc = NULL;
+#endif
+
return cpm_uart_request_port(&pinfo->port);
out_pram:
baud = 9600;
}
-#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
- udbg_putc = NULL;
-#endif
-
if (IS_SMC(pinfo)) {
out_be16(&pinfo->smcup->smc_brkcr, 0);
cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
dev_set_drvdata(&ofdev->dev, pinfo);
+ /* initialize the device pointer for the port */
+ pinfo->port.dev = &ofdev->dev;
+
ret = cpm_uart_init_port(ofdev->node, pinfo);
if (ret)
return ret;
- /* initialize the device pointer for the port */
- pinfo->port.dev = &ofdev->dev;
-
return uart_add_one_port(&cpm_reg, &pinfo->port);
}
#endif /* CONFIG_PM */
/* Align to 64-bit(8-byte), 32-byte, etc. */
-static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
+ u32 bytes_align)
{
u32 offset, ssize;
u32 mask;
dma_addr_t paddr = 0;
ssize = size + bytes_align;
- buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+ buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
__GFP_ZERO);
if (!buf->vaddr)
return -ENOMEM;
return 0;
}
-static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
+ u32 bytes_align)
{
- dma_free_coherent(NULL, size + bytes_align,
+ dma_free_coherent(dev, size + bytes_align,
buf->vaddr, (buf->paddr - buf->offset));
return;
}
machine_data->monitor_port = monitor_port;
/* Area descriptor memory pool aligns to 64-bit boundary */
- if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
+ if (allocate_buf(&ofdev->dev, &pool.ad,
+ sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
return -ENOMEM;
/* Get memory for Gamma Table - 32-byte aligned memory */
- if (allocate_buf(&pool.gamma, 768, 32)) {
+ if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
ret = -ENOMEM;
goto error;
}
/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
- if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) {
+ if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+ 32)) {
ret = -ENOMEM;
goto error;
}
i > 0; i--)
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
if (pool.ad.vaddr)
- free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+ free_buf(&ofdev->dev, &pool.ad,
+ sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
if (pool.gamma.vaddr)
- free_buf(&pool.gamma, 768, 32);
+ free_buf(&ofdev->dev, &pool.gamma, 768, 32);
if (pool.cursor.vaddr)
- free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+ free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+ 32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
iounmap(dr.diu_reg);
for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
uninstall_fb(machine_data->fsl_diu_info[i - 1]);
if (pool.ad.vaddr)
- free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+ free_buf(&ofdev->dev, &pool.ad,
+ sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
if (pool.gamma.vaddr)
- free_buf(&pool.gamma, 768, 32);
+ free_buf(&ofdev->dev, &pool.gamma, 768, 32);
if (pool.cursor.vaddr)
- free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+ free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+ 32);
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
iounmap(dr.diu_reg);
#define _FSL_DEVICE_H_
#include <linux/types.h>
-#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*
*/
-struct gianfar_platform_data {
- /* device specific information */
- u32 device_flags;
- char bus_id[BUS_ID_SIZE];
- phy_interface_t interface;
-};
-
-struct gianfar_mdio_data {
- /* board specific information */
- int irq[32];
-};
-
-/* Flags in gianfar_platform_data */
-#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
-#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
-
-struct fsl_i2c_platform_data {
- /* device specific information */
- u32 device_flags;
-};
-
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
projects / karo-tx-linux.git / commitdiff