]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
authorGary Bisson <gary.bisson@boundarydevices.com>
Wed, 30 Sep 2015 13:46:45 +0000 (15:46 +0200)
committerShawn Guo <shawnguo@kernel.org>
Mon, 19 Oct 2015 14:45:23 +0000 (22:45 +0800)
Based on i.MX6 Quad with 4GB of DDR3.

http://boundarydevices.com/product/nitrogen6max/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6q-nitrogen6_max.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi [new file with mode: 0644]

index 233159d2eaab3eac34d47c4d4a9308b0d1bdec60..cc2951537fa8c104e8883078b16ee3b2974ae2be 100644 (file)
@@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-gw552x.dtb \
        imx6q-hummingboard.dtb \
        imx6q-nitrogen6x.dtb \
+       imx6q-nitrogen6_max.dtb \
        imx6q-phytec-pbab01.dtb \
        imx6q-rex-pro.dtb \
        imx6q-sabreauto.dtb \
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
new file mode 100644 (file)
index 0000000..d417457
--- /dev/null
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+       model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+       compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
new file mode 100644 (file)
index 0000000..a35d54f
--- /dev/null
@@ -0,0 +1,873 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               stdout-path = &uart2;
+       };
+
+       memory {
+               reg = <0x10000000 0xF0000000>;
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_1p8v: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "1P8V";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-always-on;
+               };
+
+               reg_2p5v: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "2P5V";
+                       regulator-min-microvolt = <2500000>;
+                       regulator-max-microvolt = <2500000>;
+                       regulator-always-on;
+               };
+
+               reg_3p3v: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: regulator@3 {
+                       compatible = "regulator-fixed";
+                       reg = <3>;
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
+
+               reg_usb_h1_vbus: regulator@4 {
+                       compatible = "regulator-fixed";
+                       reg = <4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usbh1>;
+                       regulator-name = "usb_h1_vbus";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
+
+               reg_wlan_vmmc: regulator@5 {
+                       compatible = "regulator-fixed";
+                       reg = <5>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_wlan_vmmc>;
+                       regulator-name = "reg_wlan_vmmc";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+                       startup-delay-us = <70000>;
+                       enable-active-high;
+               };
+
+               reg_can_xcvr: regulator@6 {
+                       compatible = "regulator-fixed";
+                       reg = <6>;
+                       regulator-name = "CAN XCVR";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_can_xcvr>;
+                       gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_keys>;
+
+               power {
+                       label = "Power Button";
+                       gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+                       gpio-key,wakeup;
+               };
+
+               menu {
+                       label = "Menu";
+                       gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_MENU>;
+               };
+
+               home {
+                       label = "Home";
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_HOME>;
+               };
+
+               back {
+                       label = "Back";
+                       gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_BACK>;
+               };
+
+               volume-up {
+                       label = "Volume Up";
+                       gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+               };
+
+               volume-down {
+                       label = "Volume Down";
+                       gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEDOWN>;
+               };
+       };
+
+       i2cmux@2 {
+               compatible = "i2c-mux-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c2mux>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+                            &gpio4 15 GPIO_ACTIVE_HIGH>;
+               i2c-parent = <&i2c2>;
+               idle-state = <0>;
+
+               i2c2@1 {
+                       reg = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2@2 {
+                       reg = <2>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+       };
+
+       i2cmux@3 {
+               compatible = "i2c-mux-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c3mux>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+               i2c-parent = <&i2c3>;
+               idle-state = <0>;
+
+               i2c3@1 {
+                       reg = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               speaker-enable {
+                       gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+
+               ttymxc4-rs232 {
+                       gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+                       retain-state-suspended;
+                       default-state = "on";
+               };
+       };
+
+       backlight_lcd: backlight_lcd {
+               compatible = "pwm-backlight";
+               pwms = <&pwm1 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_3p3v>;
+               status = "okay";
+       };
+
+       backlight_lvds0: backlight_lvds0 {
+               compatible = "pwm-backlight";
+               pwms = <&pwm4 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_3p3v>;
+               status = "okay";
+       };
+
+       backlight_lvds1: backlight_lvds1 {
+               compatible = "pwm-backlight";
+               pwms = <&pwm2 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_3p3v>;
+               status = "okay";
+       };
+
+       lcd_display: display@di0 {
+               compatible = "fsl,imx-parallel-display";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               interface-pix-fmt = "bgr666";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_j15>;
+               status = "okay";
+
+               port@0 {
+                       reg = <0>;
+
+                       lcd_display_in: endpoint {
+                               remote-endpoint = <&ipu1_di0_disp0>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+
+                       lcd_display_out: endpoint {
+                               remote-endpoint = <&lcd_panel_in>;
+                       };
+               };
+       };
+
+       panel_lcd {
+               compatible = "okaya,rs800480t-7x0gp";
+               backlight = <&backlight_lcd>;
+
+               port {
+                       lcd_panel_in: endpoint {
+                               remote-endpoint = <&lcd_display_out>;
+                       };
+               };
+       };
+
+       panel_lvds0 {
+               compatible = "hannstar,hsd100pxn1";
+               backlight = <&backlight_lvds0>;
+
+               port {
+                       panel_in_lvds0: endpoint {
+                               remote-endpoint = <&lvds0_out>;
+                       };
+               };
+       };
+
+       panel_lvds1 {
+               compatible = "hannstar,hsd100pxn1";
+               backlight = <&backlight_lvds1>;
+
+               port {
+                       panel_in_lvds1: endpoint {
+                               remote-endpoint = <&lvds1_out>;
+                       };
+               };
+       };
+
+       sound {
+               compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+                            "fsl,imx-audio-sgtl5000";
+               model = "imx6q-nitrogen6_max-sgtl5000";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_sgtl5000>;
+               ssi-controller = <&ssi1>;
+               audio-codec = <&codec>;
+               audio-routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+               mux-int-port = <1>;
+               mux-ext-port = <3>;
+       };
+};
+
+&audmux {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_audmux>;
+       status = "okay";
+};
+
+&can1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_can1>;
+       xceiver-supply = <&reg_can_xcvr>;
+       status = "okay";
+};
+
+&clks {
+       assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+                         <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+       assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+                                <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1>;
+       status = "okay";
+
+       flash: m25p80@0 {
+               compatible = "microchip,sst25vf016b";
+               spi-max-frequency = <20000000>;
+               reg = <0>;
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+       txen-skew-ps = <0>;
+       txc-skew-ps = <3000>;
+       rxdv-skew-ps = <0>;
+       rxc-skew-ps = <3000>;
+       rxd0-skew-ps = <0>;
+       rxd1-skew-ps = <0>;
+       rxd2-skew-ps = <0>;
+       rxd3-skew-ps = <0>;
+       txd0-skew-ps = <0>;
+       txd1-skew-ps = <0>;
+       txd2-skew-ps = <0>;
+       txd3-skew-ps = <0>;
+       interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+                             <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+       status = "okay";
+};
+
+&hdmi {
+       ddc-i2c-bus = <&i2c2>;
+       status = "okay";
+};
+
+&i2c1 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       codec: sgtl5000@0a {
+               compatible = "fsl,sgtl5000";
+               reg = <0x0a>;
+               clocks = <&clks 201>;
+               VDDA-supply = <&reg_2p5v>;
+               VDDIO-supply = <&reg_3p3v>;
+       };
+
+       rtc: rtc@68 {
+               compatible = "st,rv4162";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_rv4162>;
+               reg = <0x68>;
+               interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       status = "okay";
+
+       touchscreen@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+               wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+       };
+
+       touchscreen@38 {
+               compatible = "edt,edt-ft5x06";
+               reg = <0x38>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+       };
+};
+
+&iomuxc {
+       imx6q-nitrogen6_max {
+               pinctrl_audmux: audmuxgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
+                               MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
+                               MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
+                               MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
+                       >;
+               };
+
+               pinctrl_can1: can1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
+                               MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
+                       >;
+               };
+
+               pinctrl_can_xcvr: can-xcvrgrp {
+                       fsl,pins = <
+                               /* Flexcan XCVR enable */
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x1b0b0
+                       >;
+               };
+
+               pinctrl_ecspi1: ecspi1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
+                               MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
+                               MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
+                               MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
+                       >;
+               };
+
+               pinctrl_enet: enetgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x100b0
+                               MX6QDL_PAD_ENET_MDC__ENET_MDC           0x100b0
+                               MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x100b0
+                               MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x100b0
+                               MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x100b0
+                               MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x100b0
+                               MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x100b0
+                               MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x100b0
+                               MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x100b0
+                               MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
+                               /* Phy reset */
+                               MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x0f0b0
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0
+                               MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
+                       >;
+               };
+
+               pinctrl_gpio_keys: gpio_keysgrp {
+                       fsl,pins = <
+                               /* Power Button */
+                               MX6QDL_PAD_NANDF_D3__GPIO2_IO03         0x1b0b0
+                               /* Menu Button */
+                               MX6QDL_PAD_NANDF_D1__GPIO2_IO01         0x1b0b0
+                               /* Home Button */
+                               MX6QDL_PAD_NANDF_D4__GPIO2_IO04         0x1b0b0
+                               /* Back Button */
+                               MX6QDL_PAD_NANDF_D2__GPIO2_IO02         0x1b0b0
+                               /* Volume Up Button */
+                               MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x1b0b0
+                               /* Volume Down Button */
+                               MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1b0b0
+                       >;
+               };
+
+               pinctrl_i2c1: i2c1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D21__I2C1_SCL    0x4001b8b1
+                               MX6QDL_PAD_EIM_D28__I2C1_SDA    0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
+                               MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c2mux: i2c2muxgrp {
+                       fsl,pins = <
+                               /* ov5642 camera i2c enable */
+                               MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x000b0
+                               /* ov5640_mipi camera i2c enable */
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_5__I2C3_SCL     0x4001b8b1
+                               MX6QDL_PAD_GPIO_16__I2C3_SDA    0x4001b8b1
+                               MX6QDL_PAD_GPIO_9__GPIO1_IO09   0x1b0b0
+                       >;
+               };
+
+               pinctrl_i2c3mux: i2c3muxgrp {
+                       fsl,pins = <
+                               /* PCIe I2C enable */
+                               MX6QDL_PAD_EIM_OE__GPIO2_IO25   0x000b0
+                       >;
+               };
+
+               pinctrl_j15: j15grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+                               MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+                               MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+                               MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+                               MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+                               MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+                               MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+                               MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+                               MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+                               MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+                               MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+                               MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+                               MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+                               MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+                               MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+                               MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+                               MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+                               MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+                               MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+                               MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+                               MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+                               MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+                               MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+                               MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+                               MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+                               MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+                               MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+                               MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+                       >;
+               };
+
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               /* PCIe reset */
+                               MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0
+                       >;
+               };
+
+               pinctrl_pwm1: pwm1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT3__PWM1_OUT   0x1b0b1
+                       >;
+               };
+
+               pinctrl_pwm2: pwm2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT2__PWM2_OUT   0x1b0b1
+                       >;
+               };
+
+               pinctrl_pwm3: pwm3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT1__PWM3_OUT   0x1b0b1
+                       >;
+               };
+
+               pinctrl_pwm4: pwm4grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_CMD__PWM4_OUT    0x1b0b1
+                       >;
+               };
+
+               pinctrl_rv4162: rv4162grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+                       >;
+               };
+
+               pinctrl_sgtl5000: sgtl5000grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x000b0
+                               MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart5: uart5grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x130b1
+                               MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x030b1
+                               /* RS485 RX Enable: pull up */
+                               MX6QDL_PAD_NANDF_RB0__GPIO6_IO10        0x1b0b1
+                               /* RS485 DEN: pull down */
+                               MX6QDL_PAD_NANDF_CLE__GPIO6_IO07        0x030b1
+                               /* RS485/!RS232 Select: pull down (rs232) */
+                               MX6QDL_PAD_EIM_CS1__GPIO2_IO24          0x030b1
+                               /* ON: pull down */
+                               MX6QDL_PAD_NANDF_ALE__GPIO6_IO08        0x030b1
+                       >;
+               };
+
+               pinctrl_usbh1: usbh1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_17__GPIO7_IO12          0x0b0b0
+                       >;
+               };
+
+               pinctrl_usbotg: usbotggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
+                               /* power enable, high active */
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x000b0
+                       >;
+               };
+
+               pinctrl_usdhc2: usdhc2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
+                               MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
+                               MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
+                               MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
+                               MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
+                               MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
+                       >;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                               MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x100b0
+                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
+                       >;
+               };
+
+               pinctrl_usdhc4: usdhc4grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
+                               MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
+                               MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
+                               MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
+                               MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
+                               MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
+                               MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
+                               MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
+                               MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
+                               MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
+                       >;
+               };
+
+               pinctrl_wlan_vmmc: wlan_vmmcgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_NANDF_CS0__GPIO6_IO11        0x100b0
+                               MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x000b0
+                               MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x000b0
+                               MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT      0x000b0
+                       >;
+               };
+       };
+};
+
+&ipu1_di0_disp0 {
+       remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+       status = "okay";
+
+       lvds-channel@0 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               port@4 {
+                       reg = <4>;
+
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&panel_in_lvds0>;
+                       };
+               };
+       };
+
+       lvds-channel@1 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               port@4 {
+                       reg = <4>;
+
+                       lvds1_out: endpoint {
+                               remote-endpoint = <&panel_in_lvds1>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie>;
+       reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&pwm1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm1>;
+       status = "okay";
+};
+
+&pwm2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm2>;
+       status = "okay";
+};
+
+&pwm3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm3>;
+       status = "okay";
+};
+
+&pwm4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm4>;
+       status = "okay";
+};
+
+&ssi1 {
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       bus-width = <4>;
+       non-removable;
+       vmmc-supply = <&reg_wlan_vmmc>;
+       cap-power-off-card;
+       keep-power-in-suspend;
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+       wlcore: wlcore@2 {
+               compatible = "ti,wl1271";
+               reg = <2>;
+               interrupt-parent = <&gpio6>;
+               interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+               ref-clock-frequency = <38400000>;
+       };
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+       bus-width = <4>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&usdhc4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc4>;
+       bus-width = <8>;
+       non-removable;
+       vmmc-supply = <&reg_1p8v>;
+       keep-power-in-suspend;
+       status = "okay";
+};