ARM: shmobile: lager: enable HS-USB

Enable HS-USB device for the Lager board, defining the GPIO that the driver
should check when probing. Since this board doesn't have the OTG ID pin, we
assume that GP5_18 (USB0_PWEN) is an ID pin because it is 1 when the SW5 is
in position 2-3 (meaning USB function) and 0 in other positions.

Note that there will be pinctrl-related error messages if both internal PCI
and HS-USB drivers are enabled but they should be just ignored.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[Sergei: added pin node and prop, moved device node, fixed summary, supplemented
changelog]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index d869f2a6826ae1e400c0e2efd2be4e95312deefb..830f2e87df4922779895c03bdcb2d39900864682 100644 (file)
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -268,6 +268,11 @@
                renesas,function = "iic3";
        };
 
+       hsusb_pins: hsusb {
+               renesas,groups = "usb0_ovc_vbus";
+               renesas,function = "usb0";
+       };
+
        usb0_pins: usb0 {
                renesas,groups = "usb0";
                renesas,function = "usb0";
@@ -478,6 +483,13 @@
        pinctrl-names = "default";
 };
 
+&hsusb {
+       status = "okay";
+       pinctrl-0 = <&hsusb_pins>;
+       pinctrl-names = "default";
+       renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
        status = "okay";
 };