From: Thomas Gleixner Date: Tue, 15 Aug 2017 07:50:13 +0000 (+0200) Subject: kernel/watchdog: Prevent false positives with turbo modes X-Git-Tag: v4.13-rc6~6^2 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-linux.git;a=commitdiff_plain;h=7edaeb6841dfb27e362288ab8466ebdc4972e867 kernel/watchdog: Prevent false positives with turbo modes The hardlockup detector on x86 uses a performance counter based on unhalted CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the performance counter period, so the hrtimer should fire 2-3 times before the performance counter NMI fires. The NMI code checks whether the hrtimer fired since the last invocation. If not, it assumess a hard lockup. The calculation of those periods is based on the nominal CPU frequency. Turbo modes increase the CPU clock frequency and therefore shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x nominal frequency) the perf/NMI period is shorter than the hrtimer period which leads to false positives. A simple fix would be to shorten the hrtimer period, but that comes with the side effect of more frequent hrtimer and softlockup thread wakeups, which is not desired. Implement a low pass filter, which checks the perf/NMI period against kernel time. If the perf/NMI fires before 4/5 of the watchdog period has elapsed then the event is ignored and postponed to the next perf/NMI. That solves the problem and avoids the overhead of shorter hrtimer periods and more frequent softlockup thread wakeups. Fixes: 58687acba592 ("lockup_detector: Combine nmi_watchdog and softlockup detector") Reported-and-tested-by: Kan Liang Signed-off-by: Thomas Gleixner Cc: dzickus@redhat.com Cc: prarit@redhat.com Cc: ak@linux.intel.com Cc: babu.moger@oracle.com Cc: peterz@infradead.org Cc: eranian@google.com Cc: acme@redhat.com Cc: stable@vger.kernel.org Cc: atomlin@redhat.com Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos --- diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 781521b7cf9e..9101bfc85539 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -100,6 +100,7 @@ config X86 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL + select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI select HAVE_ALIGNED_STRUCT_PAGE if SLUB diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 8aa01fd859fb..a36abe2da13e 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -168,6 +168,14 @@ extern int sysctl_hardlockup_all_cpu_backtrace; #define sysctl_softlockup_all_cpu_backtrace 0 #define sysctl_hardlockup_all_cpu_backtrace 0 #endif + +#if defined(CONFIG_HARDLOCKUP_CHECK_TIMESTAMP) && \ + defined(CONFIG_HARDLOCKUP_DETECTOR) +void watchdog_update_hrtimer_threshold(u64 period); +#else +static inline void watchdog_update_hrtimer_threshold(u64 period) { } +#endif + extern bool is_hardlockup(void); struct ctl_table; extern int proc_watchdog(struct ctl_table *, int , diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 06d3389bca0d..f5d52024f6b7 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -240,6 +240,7 @@ static void set_sample_period(void) * hardlockup detector generates a warning */ sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5); + watchdog_update_hrtimer_threshold(sample_period); } /* Commands for resetting the watchdog */ diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index 295a0d84934c..3a09ea1b1d3d 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -37,6 +37,62 @@ void arch_touch_nmi_watchdog(void) } EXPORT_SYMBOL(arch_touch_nmi_watchdog); +#ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP +static DEFINE_PER_CPU(ktime_t, last_timestamp); +static DEFINE_PER_CPU(unsigned int, nmi_rearmed); +static ktime_t watchdog_hrtimer_sample_threshold __read_mostly; + +void watchdog_update_hrtimer_threshold(u64 period) +{ + /* + * The hrtimer runs with a period of (watchdog_threshold * 2) / 5 + * + * So it runs effectively with 2.5 times the rate of the NMI + * watchdog. That means the hrtimer should fire 2-3 times before + * the NMI watchdog expires. The NMI watchdog on x86 is based on + * unhalted CPU cycles, so if Turbo-Mode is enabled the CPU cycles + * might run way faster than expected and the NMI fires in a + * smaller period than the one deduced from the nominal CPU + * frequency. Depending on the Turbo-Mode factor this might be fast + * enough to get the NMI period smaller than the hrtimer watchdog + * period and trigger false positives. + * + * The sample threshold is used to check in the NMI handler whether + * the minimum time between two NMI samples has elapsed. That + * prevents false positives. + * + * Set this to 4/5 of the actual watchdog threshold period so the + * hrtimer is guaranteed to fire at least once within the real + * watchdog threshold. + */ + watchdog_hrtimer_sample_threshold = period * 2; +} + +static bool watchdog_check_timestamp(void) +{ + ktime_t delta, now = ktime_get_mono_fast_ns(); + + delta = now - __this_cpu_read(last_timestamp); + if (delta < watchdog_hrtimer_sample_threshold) { + /* + * If ktime is jiffies based, a stalled timer would prevent + * jiffies from being incremented and the filter would look + * at a stale timestamp and never trigger. + */ + if (__this_cpu_inc_return(nmi_rearmed) < 10) + return false; + } + __this_cpu_write(nmi_rearmed, 0); + __this_cpu_write(last_timestamp, now); + return true; +} +#else +static inline bool watchdog_check_timestamp(void) +{ + return true; +} +#endif + static struct perf_event_attr wd_hw_attr = { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES, @@ -61,6 +117,9 @@ static void watchdog_overflow_callback(struct perf_event *event, return; } + if (!watchdog_check_timestamp()) + return; + /* check for a hardlockup * This is done by making sure our timer interrupt * is incrementing. The timer interrupt should have diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 98fe715522e8..c617b9d1d6cb 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -797,6 +797,13 @@ config HARDLOCKUP_DETECTOR_PERF bool select SOFTLOCKUP_DETECTOR +# +# Enables a timestamp based low pass filter to compensate for perf based +# hard lockup detection which runs too fast due to turbo modes. +# +config HARDLOCKUP_CHECK_TIMESTAMP + bool + # # arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard # lockup detector rather than the perf based detector.