From: Alan Stern Date: Tue, 1 Aug 2017 14:41:56 +0000 (-0400) Subject: USB: Check for dropped connection before switching to full speed X-Git-Tag: v4.13-rc5~6^2~2 X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-linux.git;a=commitdiff_plain;h=94c43b9897abf4ea366ed4dba027494e080c7050 USB: Check for dropped connection before switching to full speed Some buggy USB disk adapters disconnect and reconnect multiple times during the enumeration procedure. This may lead to a device connecting at full speed instead of high speed, because when the USB stack sees that a device isn't able to enumerate at high speed, it tries to hand the connection over to a full-speed companion controller. The logic for doing this is careful to check that the device is still connected. But this check is inadequate if the device disconnects and reconnects before the check is done. The symptom is that a device works, but much more slowly than it is capable of operating. The situation was made worse recently by commit 22547c4cc4fe ("usb: hub: Wait for connection to be reestablished after port reset"), which increases the delay following a reset before a disconnect is recognized, thus giving the device more time to reconnect. This patch makes the check more robust. If the device was disconnected at any time during enumeration, we will now skip the full-speed handover. Signed-off-by: Alan Stern Reported-and-tested-by: Zdenek Kabelac Reviewed-by: Guenter Roeck Cc: stable Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6e6797d145dd..822f8c50e423 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4725,7 +4725,8 @@ hub_power_remaining(struct usb_hub *hub) static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, u16 portchange) { - int status, i; + int status = -ENODEV; + int i; unsigned unit_load; struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); @@ -4929,9 +4930,10 @@ loop: done: hub_port_disable(hub, port1, 1); - if (hcd->driver->relinquish_port && !hub->hdev->parent) - hcd->driver->relinquish_port(hcd, port1); - + if (hcd->driver->relinquish_port && !hub->hdev->parent) { + if (status != -ENOTCONN && status != -ENODEV) + hcd->driver->relinquish_port(hcd, port1); + } } /* Handle physical or logical connection change events.