Linus Torvalds [Sat, 21 Jun 2014 17:06:02 +0000 (07:06 -1000)]
Merge branch 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rtmutex fixes from Thomas Gleixner:
"Another three patches to make the rtmutex code more robust. That's
the last urgent fallout from the big futex/rtmutex investigation"
* 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Plug slow unlock race
rtmutex: Detect changes in the pi lock chain
rtmutex: Handle deadlock detection smarter
Linus Torvalds [Sat, 21 Jun 2014 16:47:01 +0000 (06:47 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
"A couple of bug fixes, a debug change for qdio, an update for the
default config, and one small extension.
The watchdog module based on diagnose 0x288 is converted to the
watchdog API and it now works under LPAR as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ccwgroup: use ccwgroup_ungroup wrapper
s390/ccwgroup: fix an uninitialized return code
s390/ccwgroup: obtain extra reference for asynchronous processing
qdio: Keep device-specific dbf entries
s390/compat: correct ucontext layout for high gprs
s390/cio: set device name as early as possible
s390: update default configuration
s390: avoid format strings leaking into names
s390/airq: silence lockdep warning
s390/watchdog: add support for LPAR operation (diag288)
s390/watchdog: use watchdog API
s390/sclp_vt220: Enable ASCII console per default
s390/qdio: replace shift loop by ilog2
s390/cio: silence lockdep warning
s390/uaccess: always load the kernel ASCE after task switch
s390/ap_bus: Make modules parameters visible in sysfs
Linus Torvalds [Sat, 21 Jun 2014 16:45:54 +0000 (06:45 -1000)]
Merge tag 'for-linus' of git://github.com/gxt/linux
Pull UniCore32 bug fixes from Guan Xuetao:
"This includes bugfixes to make unicore32 successfully build under
defconfig, and some changes for allmodconfig (though not finished)"
* tag 'for-linus' of git://github.com/gxt/linux:
unicore32: Remove ARCH_HAS_CPUFREQ config option
UniCore32: Change git tree location information in MAINTAINERS
arch: unicore32: ksyms: export '__cpuc_coherent_kern_range' to avoid compiling failure
arch: unicore32: ksyms: export 'pm_power_off' to avoid compiling failure.
arch: unicore32: ksyms: export additional find_first_*() to avoid compiling failure
arch:unicore32:mm: add devmem_is_allowed() to support STRICT_DEVMEM
unicore32: include: asm: add missing ')' for PAGE_* macros in pgtable.h
arch/unicore32/kernel/setup.c: add generic 'screen_info' to avoid compiling failure
drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
arch: unicore32: kernel: ksyms: remove 'bswapsi2' and 'muldi3' to avoid compiling failure
arch/unicore32/kernel/ksyms.c: remove 2 export symbols to avoid compiling failure
drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0
drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue
arch/unicore32/include/asm/io.h: add readl_relaxed() generic definition
arch/unicore32/include/asm/ptrace.h: add generic definition for profile_pc()
arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error
arch/unicore32/kernel/clock.c: add readl() and writel() for 'PM_' macros
arch/unicore32/kernel/module.c: use __vmalloc_node_range() instead of __vmalloc_area()
arch/unicore32/kernel/ksyms.c: remove several undefined exported symbols
Linus Torvalds [Sat, 21 Jun 2014 16:43:19 +0000 (06:43 -1000)]
Merge tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are 3 patches, one a revert of the UIO patch you objected to in
3.16-rc1 and that no one wanted to defend, a w1 driver bugfix, and a
MAINTAINERS update for the vmware balloon driver.
All of these, except for the MAINTAINERS update which just got added,
have been in linux-next just fine"
* tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: add entry for VMware Balloon driver
w1: mxc_w1: Fix incorrect "presence" status
Revert "uio: fix vma io range check in mmap"
Linus Torvalds [Sat, 21 Jun 2014 16:42:40 +0000 (06:42 -1000)]
Merge tag 'staging-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a few fixes for staging and iio drivers that resolve issues
reported in 3.16-rc1.
All have been in linux-next just fine"
* tag 'staging-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
imx-drm: parallel-display: Fix DPMS default state.
staging: android: timed_output: fix use after free of dev
staging: comedi: addi_apci_1564: add addi_watchdog dependency
staging: rtl8723au: Reference correct firmwarefiles with MODULE_FIRMWARE()
staging: rtl8723au: Request correct firmware file for A-cut parts
iio: adc: checking for NULL instead of IS_ERR() in probe
iio: adc: at91: signedness bug in at91_adc_get_trigger_value_by_name()
iio: mxs-lradc: fix divider
iio: Fix endianness issue in ak8975_read_axis()
staging/iio: IIO_SIMPLE_DUMMY_BUFFER neds IIO_BUFFER
twl4030-madc: Request processed values in twl4030_get_madc_conversion
staging: iio: tsl2x7x_core: fix proximity treshold
iio: Fix two mpl3115 issues in measurement conversion
iio: hid-sensors: Get feature report from sensor hub after changing power state
Linus Torvalds [Sat, 21 Jun 2014 16:41:42 +0000 (06:41 -1000)]
Merge tag 'tty-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial bugfixes from Greg KH:
"Here are some tty / serial driver bugfixes for 3.16-rc2 that resolve
some reported issues. The samsung driver build error itself has been
reported by a bunch of people, sorry about that one. The others are
all tiny and everyone seems to like them in linux-next so far"
* tag 'tty-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty/serial: fix 8250 early console option passing to regular console
tty: Correct INPCK handling
serial: Fix IGNBRK handling
serial: samsung: Fix build error
Linus Torvalds [Sat, 21 Jun 2014 16:41:07 +0000 (06:41 -1000)]
Merge tag 'usb-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 3.16-rc2 that resolve some reported
issues. All of these have been in linux-next for a while with no
problems"
* tag 'usb-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: usbtest: add a timeout for scatter-gather tests
USB: EHCI: avoid BIOS handover on the HASEE E200
usb: fix hub-port pm_runtime_enable() vs runtime pm transitions
usb: quiet peer failure warning, disable poweroff
usb: improve "not suspended yet" message in hub_suspend()
xhci: Fix sleeping with IRQs disabled in xhci_stop_device()
usb: fix ->update_hub_device() vs hdev->maxchild
Linus Torvalds [Fri, 20 Jun 2014 04:58:57 +0000 (18:58 -1000)]
Merge tag 'pm+acpi-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are fixes mostly (ia64 regression related to the ACPI
enumeration of devices, cpufreq regressions, fix for I2C controllers
included in Intel SoCs, mvebu cpuidle driver fix related to sysfs)
plus additional kernel command line arguments from Kees to make it
possible to build kernel images with hibernation and the kernel
address space randomization included simultaneously, a new ACPI
battery driver quirk for a system with a broken BIOS and a couple of
ACPI core cleanups.
Specifics:
- Fix for an ia64 regression introduced during the 3.11 cycle by a
commit that modified the hardware initialization ordering and made
device discovery fail on some systems.
- Fix for a build problem on systems where the cpufreq-cpu0 driver is
built-in and the cpu-thermal driver is modular from Arnd Bergmann.
- Fix for a recently introduced computational mistake in the
intel_pstate driver that leads to excessive rounding errors from
Doug Smythies.
- Fix for a failure code path in cpufreq_update_policy() that fails
to unlock the locks acquired previously from Aaron Plattner.
- Fix for the cpuidle mvebu driver to use shorter state names which
will prevent the sysfs interface from returning mangled strings.
From Gregory Clement.
- ACPI LPSS driver fix to make sure that the I2C controllers included
in BayTrail SoCs are not held in the reset state while they are
being probed from Mika Westerberg.
- New kernel command line arguments making it possible to build
kernel images with hibernation and kASLR included at the same time
and to select which of them will be used via the command line (they
are still functionally mutually exclusive, though). From Kees
Cook.
- ACPI battery driver quirk for Acer Aspire V5-573G that fails to
send battery status change notifications timely from Alexander
Mezin.
- Two ACPI core cleanups from Christoph Jaeger and Fabian Frederick"
* tag 'pm+acpi-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: mvebu: Fix the name of the states
cpufreq: unlock when failing cpufreq_update_policy()
intel_pstate: Correct rounding in busy calculation
ACPI: use kstrto*() instead of simple_strto*()
ACPI / processor replace __attribute__((packed)) by __packed
ACPI / battery: add quirk for Acer Aspire V5-573G
ACPI / battery: use callback for setting up quirks
ACPI / LPSS: Take I2C host controllers out of reset
x86, kaslr: boot-time selectable with hibernation
PM / hibernate: introduce "nohibernate" boot parameter
cpufreq: cpufreq-cpu0: fix CPU_THERMAL dependency
ACPI / ia64 / sba_iommu: Restore the working initialization ordering
Linus Torvalds [Fri, 20 Jun 2014 04:49:37 +0000 (18:49 -1000)]
Merge tag 'sound-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The significant part here is a few security fixes for ALSA core
control API by Lars. Besides that, there are a few fixes for ASoC
sigmadsp (again by Lars) for building properly, and small fixes for
ASoC rsnd, MMP, PXA and FSL, in addition to a fix for bogus WARNING in
i915/HD-audio binding"
* tag 'sound-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: control: Make sure that id->index does not overflow
ALSA: control: Handle numid overflow
ALSA: control: Don't access controls outside of protected regions
ALSA: control: Fix replacing user controls
ALSA: control: Protect user controls against concurrent access
drm/i915, HD-audio: Don't continue probing when nomodeset is given
ASoC: fsl: Fix build problem
ASoC: rsnd: fixup index of src/dst mod when capture
ASoC: fsl_spdif: Fix integer overflow when calculating divisors
ASoC: fsl_spdif: Fix incorrect usage of regmap_read()
ASoC: dapm: Make sure register value is in sync with DAPM kcontrol state
ASoC: sigmadsp: Split regmap and I2C support into separate modules
ASoC: MMP audio needs sram support
ASoC: pxa: add I2C dependencies as needed
Linus Torvalds [Fri, 20 Jun 2014 04:40:36 +0000 (18:40 -1000)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This looks bigger than it is, as one of the nouveau firmware fixes
("drm/gf100-/gr: report class data to host on fwmthd failure")
regenerates a bunch of the firmware files after changing the assembly
by a few lines, without that, its more of a
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
drm: fix uninitialized acquire_ctx fields (v2)
drm/radeon: Fix radeon_irq_kms_pflip_irq_get/put() imbalance
Revert "drm/radeon: remove drm_vblank_get|put from pflip handling"
drm/radeon: improve dvi_mode_valid
drm/radeon: update mode_valid testing for DP
drm/radeon: Use dce5/6 hdmi deep color clock setup also on dce8+
drm/nouveau/disp: fix oops in destructor with headless cards
drm/gf117/i2c: no aux channels on this chipset
drm/nouveau/doc: update the thermal documentation
drm/nouveau/pwr: fix typo in fifo wrap handling
drm/nv50/disp: fix a potential oops in supervisor handling
drm/nouveau/disp/dp: don't touch link config after success
drm/nouveau/kms: reference vblank for crtc during pageflip.
drm/gk104/fb/ram: fixups from an earlier search+replace
drm/nv50/gr: remove an unneeded write while initialising PGRAPH
drm/nv50/gr: fix overlap while zeroing zcull regions
drm/gf100-/gr: report class data to host on fwmthd failure
drm/gk104/ibus: increase various random timeouts
drm/gk104/clk: only touch divider for mode we'll be using
drm/radeon: Bypass hw lut's for > 8 bpc framebuffer scanout.
...
Linus Torvalds [Fri, 20 Jun 2014 03:56:43 +0000 (17:56 -1000)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A smaller collection of fixes for the block core that would be nice to
have in -rc2. This pull request contains:
- Fixes for races in the wait/wakeup logic used in blk-mq from
Alexander. No issues have been observed, but it is definitely a
bit flakey currently. Alternatively, we may drop the cyclic
wakeups going forward, but that needs more testing.
- Some cleanups from Christoph.
- Fix for an oops in null_blk if queue_mode=1 and softirq completions
are used. From me.
- A fix for a regression caused by the chunk size setting. It
inadvertently used max_hw_sectors instead of max_sectors, which is
incorrect, and causes hangs on btrfs multi-disk setups (where hw
sectors apparently isn't set). From me.
- Removal of WQ_POWER_EFFICIENT in the kblockd creation. This was a
recent addition as well, but it actually breaks blk-mq which relies
on strict scheduling. If the workqueue power_efficient mode is
turned on, this breaks blk-mq. From Matias.
- null_blk module parameter description fix from Mike"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: bitmap tag: fix races in bt_get() function
blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt
blk-mq: bitmap tag: fix races on shared ::wake_index fields
block: blk_max_size_offset() should check ->max_sectors
null_blk: fix softirq completions for queue_mode == 1
blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
blk-mq: properly drain stopped queues
block: remove WQ_POWER_EFFICIENT from kblockd
null_blk: fix name and description of 'queue_mode' module parameter
block: remove elv_abort_queue and blk_abort_flushes
Linus Torvalds [Fri, 20 Jun 2014 03:53:20 +0000 (17:53 -1000)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A first set of bug fixes that didn't make it for the merge window, and
two Kconfig cleanups that still make sense at this point.
Unfortunately, one of the two cleanups caused an unintended change in
the original version, so we had to revert one part of it and do some
more testing to ensure the rest is really fine. There was also a
last-minute rebase of the patches to remove another bad commit"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: use menuconfig for sub-arch menus
ARM: multi_v7_defconfig: re-enable SDHCI drivers
ARM: EXYNOS: Fix compilation warning
ARM: exynos: move sysram info to exynos.c
ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board
ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
ARM: exynos: cleanup kconfig option display
misc: vexpress: fix error handling vexpress_syscfg_regmap_init()
ARM: Remove ARCH_HAS_CPUFREQ config option
ARM: integrator: fix section mismatch problem
ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
ARM: samsung: make SAMSUNG_DMADEV optional
remoteproc: da8xx: don't select CMA on no-MMU
bus/arm-cci: add dependency on OF && CPU_V7
ARM: keystone requires ARM_PATCH_PHYS_VIRT
ARM: omap2: fix am43xx dependency on l2x0 cache
Stephen Boyd [Tue, 3 Jun 2014 18:30:03 +0000 (11:30 -0700)]
unicore32: Remove ARCH_HAS_CPUFREQ config option
This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on unicore32 platforms.
Guan Xuetao [Mon, 26 May 2014 23:53:10 +0000 (07:53 +0800)]
UniCore32: Change git tree location information in MAINTAINERS
UniCore32 git repo has moved to github.
Branch 'unicore32' is used for prepared patches, and automatically merged to linux-next.
Branch 'unicore32-working' is used for development.
Chen Gang [Tue, 27 May 2014 00:08:06 +0000 (08:08 +0800)]
arch: unicore32: ksyms: export '__cpuc_coherent_kern_range' to avoid compiling failure
flush_icache_range() is '__cpuc_coherent_kern_range' under unicore32,
and lkdtm.ko needs it. At present, '__cpuc_coherent_kern_range' is
still used by unicore32, so export it to avoid compiling failure.
The related error (with allmodconfig under unicore32):
Chen Gang [Wed, 21 May 2014 23:08:23 +0000 (07:08 +0800)]
arch/unicore32/kernel/setup.c: add generic 'screen_info' to avoid compiling failure
Add generic 'screen_info' just like another architectures have done
(e.g. tile, sh, score, ia64, hexagon, and cris).
The related error (with allmodconfig under unicore32):
LD init/built-in.o
drivers/built-in.o: In function `vgacon_save_screen':
powercap_sys.c:(.text+0x21788): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_resize':
powercap_sys.c:(.text+0x21b54): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_switch':
powercap_sys.c:(.text+0x21cb4): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_init':
powercap_sys.c:(.text+0x2296c): undefined reference to `screen_info'
drivers/built-in.o: In function `vgacon_startup':
powercap_sys.c:(.text+0x22e80): undefined reference to `screen_info'
Chen Gang [Fri, 9 May 2014 01:19:39 +0000 (09:19 +0800)]
drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause"
The direct cause is IRQ_SPI is already defined as a macro in unicore32
architecture (also, blackfin and mips architectures define it). The
related error (unicore32 with allmodconfig)
CC [M] drivers/scsi/mvsas/mv_94xx.o
In file included from drivers/scsi/mvsas/mv_94xx.c:27:
drivers/scsi/mvsas/mv_94xx.h:176: error: expected identifier before numeric constant
And IRQ_SAS_A and IRQ_SAS_B are used as 'u32' (although "enum
pci_interrupt_cause" is not used directly, now).
All together, need add 'MVS_' for "enum pci_interrupt_cause".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Chen Gang [Wed, 21 May 2014 00:57:53 +0000 (08:57 +0800)]
arch/unicore32/kernel/ksyms.c: remove 2 export symbols to avoid compiling failure
'csum_partial' and 'csum_partial_copy_from_user' have already been
exported in "lib/", so need not export them again, or it will cause
compiling error.
The related error (with allmodconfig under unicore32):
LD vmlinux.o
lib/built-in.o:(___ksymtab+csum_partial+0x0): multiple definition of `__ksymtab_csum_partial'
arch/unicore32/kernel/built-in.o:(___ksymtab+csum_partial+0x0): first defined here
lib/built-in.o:(___ksymtab+csum_partial_copy_from_user+0x0): multiple definition of `__ksymtab_csum_partial_copy_from_user'
arch/unicore32/kernel/built-in.o:(___ksymtab+csum_partial_copy_from_user+0x0): first defined here
make: *** [vmlinux] Error 1
Chen Gang [Sat, 3 May 2014 05:09:02 +0000 (13:09 +0800)]
drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0
It is only a typo issue, the related commit:
"1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"
The related error (for unicore32 with allmodconfig):
CC [M] drivers/rtc/rtc-puv3.o
drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm':
drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev'
Chen Gang [Sat, 3 May 2014 05:07:57 +0000 (13:07 +0800)]
drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue
It is only a typo issue, the related commit:
"1fbc4c4 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"
The related error (unicore32 with allmodconfig):
CC [M] drivers/rtc/rtc-puv3.o
drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie':
drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug'
Need generic definition for readl_relaxed(), like other architectures
have done. Or can not pass compiling with allmodconfig, the related
error:
CC [M] drivers/message/fusion/mptbase.o
drivers/message/fusion/mptbase.c: In function 'mpt_send_handshake_request':
drivers/message/fusion/mptbase.c:1224: error: implicit declaration of function 'readl_relaxed'
Chen Gang [Mon, 24 Mar 2014 12:54:11 +0000 (20:54 +0800)]
arch/unicore32/include/asm/ptrace.h: add generic definition for profile_pc()
Add generic definition just like another architectures have done, or
can not pass compiling with allmodconfig, the related error:
CC kernel/profile.o
kernel/profile.c: In function 'profile_tick':
kernel/profile.c:419: error: implicit declaration of function 'profile_pc'
make[1]: *** [kernel/profile.o] Error 1
make: *** [kernel] Error 2
Chen Gang [Mon, 24 Mar 2014 12:17:44 +0000 (20:17 +0800)]
arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error
Need include "asm/pgtable.h" to include "asm-generic/pgtable-nopmd.h",
so can let 'pmd_t' defined. The related error with allmodconfig:
CC arch/unicore32/mm/alignment.o
In file included from arch/unicore32/mm/alignment.c:24:
arch/unicore32/include/asm/tlbflush.h:135: error: expected .). before .*. token
arch/unicore32/include/asm/tlbflush.h:154: error: expected .). before .*. token
In file included from arch/unicore32/mm/alignment.c:27:
arch/unicore32/mm/mm.h:15: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
arch/unicore32/mm/mm.h:20: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
arch/unicore32/mm/mm.h:25: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
make[1]: *** [arch/unicore32/mm/alignment.o] Error 1
make: *** [arch/unicore32/mm] Error 2
Chen Gang [Fri, 14 Mar 2014 01:19:39 +0000 (09:19 +0800)]
arch/unicore32/kernel/clock.c: add readl() and writel() for 'PM_' macros
Add readl() and writel() for 'PM_' macros, just like another areas have
done within unicored32, or will cause compiling issue.
The related error (allmodconfig for unicored32):
CC arch/unicore32/kernel/clock.o
arch/unicore32/kernel/clock.c: In function 'clk_set_rate':
arch/unicore32/kernel/clock.c:182: warning: initialization makes integer from pointer without a cast
arch/unicore32/kernel/clock.c:204: error: lvalue required as left operand of assignment
arch/unicore32/kernel/clock.c:206: error: lvalue required as left operand of assignment
arch/unicore32/kernel/clock.c:207: error: invalid operands to binary & (have 'void *' and 'long unsigned int')
make[1]: *** [arch/unicore32/kernel/clock.o] Error 1
make: *** [arch/unicore32/kernel] Error 2
Chen Gang [Fri, 14 Mar 2014 00:49:27 +0000 (08:49 +0800)]
arch/unicore32/kernel/module.c: use __vmalloc_node_range() instead of __vmalloc_area()
__vmalloc_area() has already been removed from upstream kernel, need
use __vmalloc_node_range() instead of.
The related commit: "d0a2126 mm: unify module_alloc code for vmalloc".
The related error (allmodconfig for unicore32):
CC arch/unicore32/kernel/module.o
arch/unicore32/kernel/module.c: In function 'module_alloc' :
arch/unicore32/kernel/module.c:34: error: implicit declaration of function '__vmalloc_area'
arch/unicore32/kernel/module.c:34: warning: return makes pointer from integer without a cast
make[1]: *** [arch/unicore32/kernel/module.o] Error 1
make: *** [arch/unicore32/kernel] Error 2
Others are only within some architectures (not kernel wide).
The related error with allmodconfig for unicode32:
CC arch/unicore32/kernel/ksyms.o
arch/unicore32/kernel/ksyms.c:29: error: ._backtrace. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:29: error: type defaults to .nt. in declaration of ._backtrace.
arch/unicore32/kernel/ksyms.c:38: error: .sum_partial_copy_nocheck. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:38: error: type defaults to .nt. in declaration of .sum_partial_copy_nocheck.
arch/unicore32/kernel/ksyms.c:39: error: ._csum_ipv6_magic. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:39: error: type defaults to .nt. in declaration of ._csum_ipv6_magic.
arch/unicore32/kernel/ksyms.c:43: error: ._raw_readsb. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:43: error: type defaults to .nt. in declaration of ._raw_readsb.
arch/unicore32/kernel/ksyms.c:46: error: ._raw_readsw. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:46: error: type defaults to .nt. in declaration of ._raw_readsw.
arch/unicore32/kernel/ksyms.c:49: error: ._raw_readsl. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:49: error: type defaults to .nt. in declaration of ._raw_readsl.
arch/unicore32/kernel/ksyms.c:52: error: ._raw_writesb. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:52: error: type defaults to .nt. in declaration of ._raw_writesb.
arch/unicore32/kernel/ksyms.c:55: error: ._raw_writesw. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:55: error: type defaults to .nt. in declaration of ._raw_writesw.
arch/unicore32/kernel/ksyms.c:58: error: ._raw_writesl. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:58: error: type defaults to .nt. in declaration of ._raw_writesl.
arch/unicore32/kernel/ksyms.c:79: error: ._get_user_1. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:79: error: type defaults to .nt. in declaration of ._get_user_1.
arch/unicore32/kernel/ksyms.c:80: error: ._get_user_2. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:80: error: type defaults to .nt. in declaration of ._get_user_2.
arch/unicore32/kernel/ksyms.c:81: error: ._get_user_4. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:81: error: type defaults to .nt. in declaration of ._get_user_4.
arch/unicore32/kernel/ksyms.c:83: error: ._put_user_1. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:83: error: type defaults to .nt. in declaration of ._put_user_1.
arch/unicore32/kernel/ksyms.c:84: error: ._put_user_2. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:84: error: type defaults to .nt. in declaration of ._put_user_2.
arch/unicore32/kernel/ksyms.c:85: error: ._put_user_4. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:85: error: type defaults to .nt. in declaration of ._put_user_4.
arch/unicore32/kernel/ksyms.c:86: error: ._put_user_8. undeclared here (not in a function)
arch/unicore32/kernel/ksyms.c:86: error: type defaults to .nt. in declaration of ._put_user_8.
Rob Herring [Thu, 12 Jun 2014 17:52:44 +0000 (12:52 -0500)]
tty/serial: fix 8250 early console option passing to regular console
In the conversion to generic early console, the passing of options from
the early 8250 console to the regular ttyS console was broken. This
resulted in the baud rate changing when switching consoles during boot.
This feature allows specifying a single console option on the kernel
command line rather than both an early console and regular serial tty
console. It would be nice to generalize this feature. However, it only
works if the correct baud rate can be probed early which is not the
case on many platforms which have non-standard UART clock rates. So for
now, this is left as an 8250 specific feature.
Reported-and-tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Mon, 16 Jun 2014 12:10:42 +0000 (08:10 -0400)]
tty: Correct INPCK handling
If INPCK is not set, input parity detection should be disabled. This means
parity errors should not be received from the tty driver, and the data
received should be treated normally.
SUS v3, 11.2.2, General Terminal Interface - Input Modes, states:
"If INPCK is set, input parity checking shall be enabled. If INPCK is
not set, input parity checking shall be disabled, allowing output parity
generation without input parity errors. Note that whether input parity
checking is enabled or disabled is independent of whether parity detection
is enabled or disabled (see Control Modes). If parity detection is enabled
but input parity checking is disabled, the hardware to which the terminal
is connected shall recognize the parity bit, but the terminal special file
shall not check whether or not this bit is correctly set."
Ignore parity errors reported by the tty driver when INPCK is not set, and
handle the received data normally.
Fixes: Bugzilla #71681, 'Improvement of n_tty_receive_parity_error from n_tty.c' Reported-by: Ivan <athlon_@mail.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Mon, 16 Jun 2014 12:10:41 +0000 (08:10 -0400)]
serial: Fix IGNBRK handling
If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.
SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
"If IGNBRK is set, a break condition detected on input shall be ignored;
that is, not put on the input queue and therefore not read by any
process."
Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.
Linus Torvalds [Thu, 19 Jun 2014 17:53:27 +0000 (07:53 -1000)]
Merge tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fixes from David Vrabel:
"Xen regression and PVH fixes for 3.16-rc1
- fix dom0 PVH memory setup on latest unstable Xen releases
- fix 64-bit x86 PV guest boot failure on Xen 3.1 and earlier
- fix resume regression on non-PV (auto-translated physmap) guests"
* tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/grant-table: fix suspend for non-PV guests
x86/xen: no need to explicitly register an NMI callback
Revert "xen/pvh: Update E820 to work with PVH (v2)"
x86/xen: fix memory setup for PVH dom0
Linus Torvalds [Thu, 19 Jun 2014 17:51:45 +0000 (07:51 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"These are primarily bug fixes with a performance improvement patch for
the GHASH crypto algorithm (which went in during this merging window)
and dts/defconfig/Kconfig updates.
- ftrace_return_addr() macro fix for arm (introduced earlier via the
arm64 tree)
- stack alignment exception entry code fix
- GHASH crypto algorithm fix and performance improvement
- CMA buffer limited to 32-bit (until a better way to describe the
system topology in DT)
- UAPI sigcontext.h build fix
- __kernel_old_{gid,uid}_t definitions fix (affecting 32-bit LTP)
- ptrace fixes (kernel fault and 32-bit arm core dump)
- pte_mknotpresent() fix
- dts updates (APM SoC)
- defconfig and Kconfig update"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: remove broken &= operator from pmd_mknotpresent
arm64: fix build error in sigcontext.h
arm64: dts: Add more serial port nodes in APM X-Gene device tree
arm64/dma: Removing ARCH_HAS_DMA_GET_REQUIRED_MASK macro
arm64: ptrace: fix empty registers set in prstatus of aarch32 process core
arm64: uid16: fix __kernel_old_{gid,uid}_t definitions
arm64: ptrace: change fs when passing kernel pointer to regset code
arm64: Limit the CMA buffer to 32-bit if ZONE_DMA
arm/ftrace: fix ftrace_return_addr() to ftrace_return_address()
arm64/crypto: improve performance of GHASH algorithm
arm64/crypto: fix data corruption bug in GHASH algorithm
arm64: defconfig update for LTP
arm64: ftrace: Fix comment typo 'CONFIG_FUNCTION_GRAPH_FP_TEST'
arm64: add ARCH_HAS_OPP to allow enabling OPP library
arm64: restore alphabetic order in Kconfig
arm64: Bug fix in stack alignment exception
Dave Airlie [Thu, 19 Jun 2014 00:54:35 +0000 (10:54 +1000)]
Merge tag 'drm-intel-fixes-2014-06-17' of git://anongit.freedesktop.org/drm-intel into drm-next
First round of fixes for 3.16-rc, mostly cc: stable, and the vt/vgacon
fixes from Daniel [1] to avoid hangs and unclaimed register errors on
module load/reload.
* tag 'drm-intel-fixes-2014-06-17' of git://anongit.freedesktop.org/drm-intel:
drm/i915/bdw: remove erroneous chv specific workarounds from bdw code
drm/i915: fix possible refcount leak when resetting forcewake
drm/i915: Reorder semaphore deadlock check
drm/i95: Initialize active ring->pid to -1
drm/i915: set backlight duty cycle after backlight enable for gen4
drm/i915: Avoid div-by-zero when pixel_multiplier is zero
drm/i915: Disable FBC by default also on Haswell and later
drm/i915: Kick out vga console
drm/i915: Fixup global gtt cleanup
vt: Don't ignore unbind errors in vt_unbind
vt: Fix up unregistration of vt drivers
vt: Fix replacement console check when unbinding
Rob Clark [Sat, 7 Jun 2014 14:55:39 +0000 (10:55 -0400)]
drm: fix uninitialized acquire_ctx fields (v2)
The acquire ctx will typically be declared on the stack, which means we
could have garbage values for any uninitialized field. In this case, it
was triggering WARN_ON()s because 'contended' had garbage value.
Go ahead and use memset() to be more future-proof.
v2: now with extra brown paper bag
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 19 Jun 2014 00:25:49 +0000 (10:25 +1000)]
Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
mode validation, deep color and pageflipping fixes.
* 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Fix radeon_irq_kms_pflip_irq_get/put() imbalance
Revert "drm/radeon: remove drm_vblank_get|put from pflip handling"
drm/radeon: improve dvi_mode_valid
drm/radeon: update mode_valid testing for DP
drm/radeon: Use dce5/6 hdmi deep color clock setup also on dce8+
With commit aed3f9d498b ("staging: comedi: addi_apci_1564:
absorb apci1564_reset()"), the apci 1564 driver has gained
a dependency on the addi watchdog module, which is not reflected
correctly in Kconfig, and that can lead to link errors
when the watchdog is disabled.
This adds an explicit 'select', like it is done in the other
addi apci drivers that need it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unbalanced calls would presumably result in the page flip interrupts
never getting disabled once they are enabled.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_vblank_get() is necessary to ensure the DRM vblank counter value is
up to date in drm_send_vblank_event().
Seems to fix weston hangs waiting for page flips to complete.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gregory CLEMENT [Wed, 18 Jun 2014 12:37:43 +0000 (14:37 +0200)]
cpuidle: mvebu: Fix the name of the states
The length name of the states 2 was too long to fit in the allocated
string (limited to 16 bytes). This lead to improper string displayed
through sysfs.
This patch shorten the name by removing the reference to Marvell and
to the CPU as both are implicit. For coherency the same change have
been done for the states 1.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Aaron Plattner [Wed, 18 Jun 2014 18:27:32 +0000 (11:27 -0700)]
cpufreq: unlock when failing cpufreq_update_policy()
Commit bd0fa9bb455d introduced a failure path to cpufreq_update_policy() if
cpufreq_driver->get(cpu) returns NULL. However, it jumps to the 'no_policy'
label, which exits without unlocking any of the locks the function acquired
earlier. This causes later calls into cpufreq to hang.
Fix this by creating a new 'unlock' label and jumping to that instead.
Merge tag 'iio-fixes-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 3.16 cycle.
A mixed bag of fixes, many of which feel just to late for 3.15.
* hid sensors - some devices need a feature report request in order to
change power state. This isn't part of the spec, but has been observed
on several devices and does no harm to others.
* mpl3115 has had two errors in the buffer description fixed. The presure is
signed, not unsigned and the temperature has 12 bits rather than 16.
These could lead to incorrect interpretation of the data in userspace.
* tsl2x7x - the high byte of the proximity thresholds should be written along
with the low byte (which was). This could lead to interesting results
with large thresholds.
* twl4030 - a flag to specify processed values were required was not set
when initializing a reading. As such values returned were in an unknown
state. Fixed by simply initializing it appropriately.
* IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig
build errors.
* ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework
already performs one. As such for big endian systems, the bytes would be
in the wrong order in the magnetic field measurements reported.
* mxs-lradc - the controllable voltage dividers were not enabled / disabled for
later channels than the first one during conversion.
* at91_adc error handling returned -ENOMEM in a u8. Return value of
at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and
also original values to be returned.
* mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for
NULL to detect an error.
Will Deacon [Wed, 18 Jun 2014 13:06:27 +0000 (14:06 +0100)]
arm64: mm: remove broken &= operator from pmd_mknotpresent
This should be a plain old '&' and could easily lead to undefined
behaviour if the target of a pmd_mknotpresent invocation was the same
as the parameter.
Takashi Iwai [Wed, 18 Jun 2014 14:32:14 +0000 (16:32 +0200)]
Merge tag 'asoc-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.16
Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.
ALSA: control: Make sure that id->index does not overflow
The ALSA control code expects that the range of assigned indices to a control is
continuous and does not overflow. Currently there are no checks to enforce this.
If a control with a overflowing index range is created that control becomes
effectively inaccessible and unremovable since snd_ctl_find_id() will not be
able to find it. This patch adds a check that makes sure that controls with a
overflowing index range can not be created.
Each control gets automatically assigned its numids when the control is created.
The allocation is done by incrementing the numid by the amount of allocated
numids per allocation. This means that excessive creation and destruction of
controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to
eventually overflow. Currently when this happens for the control that caused the
overflow kctl->id.numid + kctl->count will also over flow causing it to be
smaller than kctl->id.numid. Most of the code assumes that this is something
that can not happen, so we need to make sure that it won't happen
ALSA: control: Don't access controls outside of protected regions
A control that is visible on the card->controls list can be freed at any time.
This means we must not access any of its memory while not holding the
controls_rw_lock. Otherwise we risk a use after free access.
There are two issues with the current implementation for replacing user
controls. The first is that the code does not check if the control is actually a
user control and neither does it check if the control is owned by the process
that tries to remove it. That allows userspace applications to remove arbitrary
controls, which can cause a user after free if a for example a driver does not
expect a control to be removed from under its feed.
The second issue is that on one hand when a control is replaced the
user_ctl_count limit is not checked and on the other hand the user_ctl_count is
increased (even though the number of user controls does not change). This allows
userspace, once the user_ctl_count limit as been reached, to repeatedly replace
a control until user_ctl_count overflows. Once that happens new controls can be
added effectively bypassing the user_ctl_count limit.
Both issues can be fixed by instead of open-coding the removal of the control
that is to be replaced to use snd_ctl_remove_user_ctl(). This function does
proper permission checks as well as decrements user_ctl_count after the control
has been removed.
Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at
beginning of the function if the control already exists is removed. This is not
a problem though since the check is quite useless, because the lock that is
protecting the control list is released between the check and before adding the
new control to the list, which means that it is possible that a different
control with the same settings is added to the list after the check. Luckily
there is another check that is done while holding the lock in snd_ctl_add(), so
we'll rely on that to make sure that the same control is not added twice.
ALSA: control: Protect user controls against concurrent access
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.
Mark Salter [Wed, 11 Jun 2014 20:14:42 +0000 (21:14 +0100)]
arm64: fix build error in sigcontext.h
I'm seeing this build failure for arm64:
CC [M] Documentation/filesystems/configfs/configfs_example_macros.o
In file included from /usr/include/bits/sigcontext.h:27:0,
from /usr/include/signal.h:340,
from /usr/include/sys/wait.h:30,
from Documentation/accounting/getdelays.c:24:
.../linux/usr/include/asm/sigcontext.h:61:2: error: unknown type name ‘u64’
u64 esr;
^
make[2]: *** [Documentation/accounting/getdelays] Error 1
Vinayak Kale [Wed, 26 Mar 2014 12:19:06 +0000 (12:19 +0000)]
arm64: dts: Add more serial port nodes in APM X-Gene device tree
APM X-Gene Storm SoC supports 4 serial ports. This patch adds device nodes
for serial ports 1 to 3 (a device node for serial port 0 is already present
in the dts file).
This patch also sets the compatible property of serial nodes to "ns16550a".
Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Arm64 does not define dma_get_required_mask() function.
Therefore, it should not define the ARCH_HAS_DMA_GET_REQUIRED_MASK.
This causes build errors in some device drivers (e.g. mpt2sas)
Victor Kamensky [Tue, 3 Jun 2014 18:21:30 +0000 (19:21 +0100)]
arm64: ptrace: fix empty registers set in prstatus of aarch32 process core
Currently core file of aarch32 process prstatus note has empty
registers set. As result aarch32 core files create by V8 kernel are
not very useful.
It happens because compat_gpr_get and compat_gpr_set functions can
copy registers values to/from either kbuf or ubuf. ELF core file
collection function fill_thread_core_info calls compat_gpr_get
with kbuf set and ubuf set to 0. But current compat_gpr_get and
compat_gpr_set function handle copy to/from only ubuf case.
Fix is to handle kbuf and ubuf as two separate cases in similar
way as other functions like user_regset_copyout, user_regset_copyin do.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Whilst native arm64 applications don't have the 16-bit UID/GID syscalls
wired up, compat tasks can still access them. The 16-bit wrappers for
these syscalls use __kernel_old_uid_t and __kernel_old_gid_t, which must
be 16-bit data types to maintain compatibility with the 16-bit UIDs used
by compat applications.
This patch defines 16-bit __kernel_old_{gid,uid}_t types for arm64
instead of using the 32-bit types provided by asm-generic.
Will Deacon [Mon, 2 Jun 2014 10:47:23 +0000 (11:47 +0100)]
arm64: ptrace: change fs when passing kernel pointer to regset code
Our compat PTRACE_POKEUSR implementation simply passes the user data to
regset_copy_from_user after some simple range checking. Unfortunately,
the data in question has already been copied to the kernel stack by this
point, so the subsequent access_ok check fails and the ptrace request
returns -EFAULT. This causes problems tracing fork() with older versions
of strace.
This patch briefly changes the fs to KERNEL_DS, so that the access_ok
check passes even with a kernel address.
Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Fri, 13 Jun 2014 12:41:20 +0000 (13:41 +0100)]
arm64: Limit the CMA buffer to 32-bit if ZONE_DMA
When the CMA buffer is allocated, it is too early to know whether
devices will require ZONE_DMA memory. This patch limits the CMA buffer
to (DMA_BIT_MASK(32) + 1) if CONFIG_ZONE_DMA is enabled.
In addition, it computes the dma_to_phys(DMA_BIT_MASK(32)) before the
increment (no current functional change).
Steven Rostedt [Mon, 16 Jun 2014 14:25:29 +0000 (15:25 +0100)]
arm/ftrace: fix ftrace_return_addr() to ftrace_return_address()
The clean up of CALLER_ADDR*() functions required the archs to either
use the default __builtin_return_address(X) (where X > 0) or override
it with something the arch can use. To override it, the arch would
define ftrace_return_address(x).
The arm architecture requires this to be redefined but instead of
defining ftrace_return_address(x) it defined ftrace_return_addr(x).
Fixes: eed542d6962b (ftrace: Make CALLER_ADDRx macros more generic) Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ard Biesheuvel [Mon, 16 Jun 2014 10:02:16 +0000 (11:02 +0100)]
arm64/crypto: improve performance of GHASH algorithm
This patches modifies the GHASH secure hash implementation to switch to a
faster, polynomial multiplication based reduction instead of one that uses
shifts and rotates.
Ard Biesheuvel [Mon, 16 Jun 2014 10:02:15 +0000 (11:02 +0100)]
arm64/crypto: fix data corruption bug in GHASH algorithm
This fixes a bug in the GHASH algorithm resulting in the calculated hash to be
incorrect if the input is presented in chunks whose size is not a multiple of
16 bytes.
Sudeep Holla [Fri, 9 May 2014 09:33:02 +0000 (10:33 +0100)]
arm64: add ARCH_HAS_OPP to allow enabling OPP library
The Operating Performance Point (OPP) Layer library is a generic
library used by CPUFREQ and DEVFREQ. It can be enabled only on the
platforms that specify ARCH_HAS_OPP option.
This patch selects that option in order to allow ARM64 based platforms
to use OPP library.
ChiaHao [Thu, 12 Jun 2014 14:32:33 +0000 (15:32 +0100)]
arm64: Bug fix in stack alignment exception
The value of ESR has been stored into x1, and should be directly pass to
do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort
will get the wrong value of ESR.
The gnttab_suspend() would clear the mapping for the grant table
frames, but the ->unmap_frames() call is only applicable to PV guests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
James Morris [Wed, 18 Jun 2014 08:57:50 +0000 (18:57 +1000)]
security: add Serge Hallyn as a maintainer
Add Serge E. Hallyn <serge@hallyn.com> as a co-maintainer of the
security subsystem, to avoid having a single point of failure
in the development process.
Signed-off-by: James Morris <james.l.morris@oracle.com>
Dave Airlie [Wed, 18 Jun 2014 05:50:58 +0000 (15:50 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
couple more DP regression fixes.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/disp: fix oops in destructor with headless cards
drm/gf117/i2c: no aux channels on this chipset
blk-mq: bitmap tag: fix races in bt_get() function
This update fixes few issues in bt_get() function:
- list_empty(&wait.task_list) check is not protected;
- was_empty check is always true which results in *every* thread
entering the loop resets bt_wait_state::wait_cnt counter rather
than every bt->wake_cnt'th thread;
- 'bt_wait_state::wait_cnt' counter update is redundant, since
it also gets reset in bt_clear_tag() function;
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
If the decrement in [1] yields zero then for some amount of time
the decrement in [2] results in a negative/overflow value, which
is not expected. The follow-up assignment in [3] overwrites the
invalid value with the batch value (and likely prevents the issue
from being severe) which is still incorrect and should be a lesser.
Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Wed, 18 Jun 2014 00:25:09 +0000 (14:25 -1000)]
Merge tag 'dt-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull device tree fixes from Rob Herring:
- fix microblaze compiling due to conflicting merge window changes
- a fix in of_attach_node due to of_find_node_by_path changes
- prevent format strings in DT kobject names
* tag 'dt-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
OF: fix of_find_node_by_path() assumption that of_allnodes is root
of: avoid format string parsing in kobject names
of/platform: Fix microblaze build failure
Linus Torvalds [Wed, 18 Jun 2014 00:21:07 +0000 (14:21 -1000)]
Merge tag 'regulator-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few small fixes:
- Fixes for bugs in Palmas and as3722 exposed by recent changes in
the core - the drivers weren't allowing the current configuration
to be read sometimes.
- Provide a stub for regulator_can_change_voltage() for !REGULATOR.
- Make sure ltc3589 only looks at its child nodes in the device tree
rather than searching the whole tree"
* tag 'regulator-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ltc3589: Use of_get_child_by_name
regulator: palmas: Fix SMPS list for 0V
regulator: add regulator_can_change_voltage stub
regulator: as3722: Make 0 a valid selector
Sachin Kamat [Tue, 3 Jun 2014 06:26:25 +0000 (11:56 +0530)]
serial: samsung: Fix build error
Fixes the following build error due to a typo introduced
by commit e4ac92df27 ("serial: samsung: Neaten dbg uses"):
drivers/tty/serial/samsung.c:69:26: error: ‘buf’ undeclared (first use in this function)
Reported-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Tue, 3 Jun 2014 15:11:34 +0000 (11:11 -0400)]
USB: usbtest: add a timeout for scatter-gather tests
In usbtest, tests 5 - 8 use the scatter-gather library in usbcore
without any sort of timeout. If there's a problem in the gadget or
host controller being tested, the test can hang.
This patch adds a 10-second timeout to the tests, so that they will
fail gracefully with an ETIMEDOUT error instead of hanging.
Alan Stern [Tue, 3 Jun 2014 15:00:27 +0000 (11:00 -0400)]
USB: EHCI: avoid BIOS handover on the HASEE E200
Leandro Liptak reports that his HASEE E200 computer hangs when we ask
the BIOS to hand over control of the EHCI host controller. This
definitely sounds like a bug in the BIOS, but at the moment there is
no way to fix it.
This patch works around the problem by avoiding the handoff whenever
the motherboard and BIOS version match those of Leandro's computer.
Dan Williams [Tue, 17 Jun 2014 23:16:32 +0000 (16:16 -0700)]
usb: fix hub-port pm_runtime_enable() vs runtime pm transitions
Commit 9262c19d14c4 "usb: disable port power control if not supported in
wHubCharacteristics" gated enabling runtime pm for usb_port devices on
whether the parent hub supports power control, which causes a
regression. The port must still be allowed to carry out runtime pm
callbacks and receive a -EAGAIN or -EBUSY result. Otherwise the
usb_port device will transition to the pm error state and trigger the
same for the child usb_device.
Prior to the offending commit usb_hub_create_port_device() arranged for
runtime pm to be disabled is dev_pm_qos_expose_flags() failed. Instead,
force the default state of PM_QOS_FLAG_NO_POWER_OFF flag to be set prior
to enabling runtime pm. If that policy can not be set then fail
registration.
Report: http://marc.info/?l=linux-usb&m=140290586301336&w=2 Fixes: 9262c19d14c4 ("usb: disable port power control if not supported in wHubCharacteristics") Reported-by: Bjørn Mork <bjorn@mork.no> Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Tue, 17 Jun 2014 23:16:27 +0000 (16:16 -0700)]
usb: quiet peer failure warning, disable poweroff
In the case where platform firmware has specified conflicting values for
port locations it is confusing and otherwise not helpful to throw a
backtrace. Instead, include enough information to determine that
firmware has done something wrong and globally disable port poweroff.
Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log