Matt Fleming [Wed, 4 Apr 2012 00:08:22 +0000 (10:08 +1000)]
frv: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allocation may be large. The code is probing to see if it will
succeed and if not, it falls back to vmalloc(). We should suppress any
page-allocation failure messages when the fallback happens.
Reported-by: Dave Jones <davej@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: remove lru type checks from __isolate_lru_page()
After patch "mm: forbid lumpy-reclaim in shrink_active_list()" we can
completely remove anon/file and active/inactive lru type filters from
__isolate_lru_page(), because isolation for 0-order reclaim always
isolates pages from right lru list. And pages-isolation for lumpy
shrink_inactive_list() or memory-compaction anyway allowed to isolate
pages from all evictable lru lists.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GCC sometimes ignores "inline" directives even for small and simple functions.
This supposed to be fixed in gcc 4.7, but it was released only yesterday.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With mem_cgroup_disabled() now explicit, it becomes clear that the
zone_reclaim_stat structure actually belongs in lruvec, per-zone when
memcg is disabled but per-memcg per-zone when it's enabled.
We can delete mem_cgroup_get_reclaim_stat(), and change
update_page_reclaim_stat() to update just the one set of stats, the one
which get_scan_count() will actually use.
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/memcg: scanning_global_lru means mem_cgroup_disabled
Although one has to admire the skill with which it has been concealed,
scanning_global_lru(mz) is actually just an interesting way to test
mem_cgroup_disabled(). Too many developer hours have been wasted on
confusing it with global_reclaim(): just use mem_cgroup_disabled().
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Glauber Costa <glommer@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memcg: fix/change behavior of shared anon at moving task
This patch changes memcg's behavior at task_move().
At task_move(), the kernel scans a task's page table and move the changes
for mapped pages from source cgroup to target cgroup. There has been a
bug at handling shared anonymous pages for a long time.
Before patch:
- The spec says 'shared anonymous pages are not moved.'
- The implementation was 'shared anonymoys pages may be moved'.
If page_mapcount <=2, shared anonymous pages's charge were moved.
After patch:
- The spec says 'all anonymous pages are moved'.
- The implementation is 'all anonymous pages are moved'.
Considering usage of memcg, this will not affect user's experience.
'shared anonymous' pages only exists between a tree of processes which
don't do exec(). Moving one of process without exec() seems not sane.
For example, libcgroup will not be affected by this change. (Anyway, no
one noticed the implementation for a long time...)
Below is a discussion log:
- current spec/implementation are complex
- Now, shared file caches are moved
- It adds unclear check as page_mapcount(). To do correct check,
we should check swap users, etc.
- No one notice this implementation behavior. So, no one get benefit
from the design.
- In general, once task is moved to a cgroup for running, it will not
be moved....
- Finally, we have control knob as memory.move_charge_at_immigrate.
Here is a patch to allow moving shared pages, completely. This makes
memcg simpler and fix current broken code.
Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the fixes suggested by Andrew Morton. Not much of a changelog
since the patch should probably be folded into
mm-add-extra-free-kbytes-tunable.patch
Thank you for pointing these out, Andrew.
Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a userspace visible knob to tell the VM to keep an extra amount of
memory free, by increasing the gap between each zone's min and low
watermarks.
This is useful for realtime applications that call system calls and have a
bound on the number of allocations that happen in any short time period.
In this application, extra_free_kbytes would be left at an amount equal to
or larger than than the maximum number of allocations that happen in any
burst.
It may also be useful to reduce the memory use of virtual machines
(temporarily?), in a way that does not cause memory fragmentation like
ballooning does.
Testing results from Satoru Moriya:
: I ran some sample workloads and measure memory allocation latency
: (latency of __alloc_page_nodemask()).
: The test is like following:
:
: - CPU: 1 socket, 4 core
: - Memory: 4GB
:
: - Background load:
: $ dd if=3D/dev/zero of=3D/tmp/tmp1
: $ dd if=3D/dev/zero of=3D/tmp/tmp2
: $ dd if=3D/dev/zero of=3D/tmp/tmp3
:
: - Main load:
: $ mapped-file-stream 1 $((1024 * 1024 * 640)) --(*)
:
: (*) This is made by Johannes Weiner
: https://lkml.org/lkml/2010/8/30/226
:
: It allocates/access 640MByte memory at a burst.
:
: The result is follwoing:
:
: | | extra |
: | default | kbytes |
: --------------------------------------------------------------
: min_free_kbytes | 8113 | 8113 |
: extra_free_kbytes | 0 | 640*1024 | (KB)
: --------------------------------------------------------------
: worst latency | 517.762 | 20.775 | (usec)
: --------------------------------------------------------------
: vmstat result | | |
: nr_vmscan_write | 0 | 0 |
: pgsteal_dma | 0 | 0 |
: pgsteal_dma32 | 143667 | 144882 |
: pgsteal_normal | 31486 | 27001 |
: pgsteal_movable | 0 | 0 |
: pgscan_kswapd_dma | 0 | 0 |
: pgscan_kswapd_dma32 | 138617 | 156351 |
: pgscan_kswapd_normal | 30593 | 27955 |
: pgscan_kswapd_movable | 0 | 0 |
: pgscan_direct_dma | 0 | 0 |
: pgscan_direct_dma32 | 5050 | 0 |
: pgscan_direct_normal | 896 | 0 |
: pgscan_direct_movable | 0 | 0 |
: kswapd_steal | 169207 | 171883 |
: kswapd_inodesteal | 0 | 0 |
: kswapd_low_wmark_hit_quickly | 43 | 45 |
: kswapd_high_wmark_hit_quickly | 1 | 0 |
: allocstall | 32 | 0 |
:
:
: As you can see, in the default case there were 32 direct reclaim
: (allocstal= l) and its worst latency was 517.762 usecs. This value may be
: larger if a process would sleep or issue I/O in the direct reclaim path.
: OTOH, ii the other case where I add extra free bytes, there were no direct
: reclaim and its worst latency was 20.775 usecs.
:
: In this test case, we can avoid direct reclaim and keep a latency low.
Signed-off-by: Rik van Riel<riel@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Tested-by: Satoru Moriya <satoru.moriya@hds.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit v2.6.36-5896-gd065bd8 "mm: retry page fault when blocking on
disk transfer" we usually wait in page-faults without mmap_sem held, so
all swap-token logic was broken, because it based on using
rwsem_is_locked(&mm->mmap_sem) as sign of in progress page-faults.
Add an atomic counter of in progress page-faults for mm to the mm_struct
with swap-token.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
lglocks and brlocks are currently generated with some complicated macros
in lglock.h. But there's no reason to not just use common utility
functions and put all the data into a common data structure.
Since there are at least two users it makes sense to share this code in a
library. This is also easier maintainable than a macro forest.
This will also make it later possible to dynamically allocate lglocks and
also use them in modules (this would both still need some additional, but
now straightforward, code)
In general the users now look more like normal function calls with
pointers, not magic macros.
The patch is rather large because I move over all users in one go to keep
it bisectable. This impacts the VFS somewhat in terms of lines changed.
But no actual behaviour change.
[akpm@linux-foundation.org: checkpatch fixes]
[levinsasha928@gmail.com: fix dup_mnt_ns()] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On systems that have user-writable directories on the same partition as
system files, a long-standing class of security issues is the
hardlink-based time-of-check-time-of-use race, most commonly seen in
world-writable directories like /tmp. The common method of exploitation
of this flaw is to cross privilege boundaries when following a given
hardlink (i.e. a root process follows a hardlink created by another
user). Additionally, an issue exists where users can "pin" a potentially
vulnerable setuid/setgid file so that an administrator will not actually
upgrade a system fully.
The solution is to permit hardlinks to only be created when the user is
already the existing file's owner, or if they already have read/write
access to the existing file.
Many Linux users are surprised when they learn they can link to files they
have no access to, so this change appears to follow the doctrine of "least
surprise". Additionally, this change does not violate POSIX, which states
"the implementation may require that the calling process has permission to
access the existing file"[1].
This change is known to break some implementations of the "at" daemon,
though the version used by Fedora and Ubuntu has been fixed[2] for a
while. Otherwise, the change has been undisruptive while in use in Ubuntu
for the last 1.5 years.
This patch is based on the patch in Openwall and grsecurity. I have added
a sysctl to enable the protected behavior, documentation, and an audit
notification.
[akpm@linux-foundation.org: uninline may_linkat() and audit_log_link_denied()] Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Rik van Riel <riel@redhat.com> Cc: Federica Teodori <federica.teodori@googlemail.com> Cc: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A longstanding class of security issues is the symlink-based
time-of-check-time-of-use race, most commonly seen in world-writable
directories like /tmp. The common method of exploitation of this flaw is
to cross privilege boundaries when following a given symlink (i.e. a root
process follows a symlink belonging to another user). For a likely
incomplete list of hundreds of examples across the years, please see:
http://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=/tmp
The solution is to permit symlinks to only be followed when outside a
sticky world-writable directory, or when the uid of the symlink and
follower match, or when the directory owner matches the symlink's owner.
Some pointers to the history of earlier discussion that I could find:
1996 Aug, Zygo Blaxell
http://marc.info/?l=bugtraq&m=87602167419830&w=2
1996 Oct, Andrew Tridgell
http://lkml.indiana.edu/hypermail/linux/kernel/9610.2/0086.html
1997 Dec, Albert D Cahalan
http://lkml.org/lkml/1997/12/16/4
2005 Feb, Lorenzo Hernández García-Hierro
http://lkml.indiana.edu/hypermail/linux/kernel/0502.0/1896.html
2010 May, Kees Cook
https://lkml.org/lkml/2010/5/30/144
Past objections and rebuttals could be summarized as:
- Violates POSIX.
- POSIX didn't consider this situation and it's not useful to follow
a broken specification at the cost of security.
- Might break unknown applications that use this feature.
- Applications that break because of the change are easy to spot and
fix. Applications that are vulnerable to symlink ToCToU by not having
the change aren't. Additionally, no applications have yet been found
that rely on this behavior.
- Applications should just use mkstemp() or O_CREATE|O_EXCL.
- True, but applications are not perfect, and new software is written
all the time that makes these mistakes; blocking this flaw at the
kernel is a single solution to the entire class of vulnerability.
- This should live in the core VFS.
- This should live in an LSM. (https://lkml.org/lkml/2010/5/31/135)
- This should live in an LSM.
- This should live in the core VFS. (https://lkml.org/lkml/2010/8/2/188)
This patch is based on the patch in Openwall and grsecurity, along with
suggestions from Al Viro. I have added a sysctl to enable the protected
behavior, documentation, and an audit notification.
[akpm@linux-foundation.org: move sysctl_protected_sticky_symlinks declaration into .h] Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Rik van Riel <riel@redhat.com> Cc: Federica Teodori <federica.teodori@googlemail.com> Cc: Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a file is truncated with truncate()/ftruncate() and then closed,
iversion is not updated. This patch uses ATTR_SIZE flag as an indication
to increment iversion.
Mimi said:
On fput(), i_version is used to detect and flag files that have changed
and need to be re-measured in the IMA measurement policy. When a file
is truncated with truncate()/ftruncate() and then closed, i_version is
not updated. As a result, although the file has changed, it will not be
re-measured and added to the IMA measurement list on subsequent access.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:12 +0000 (10:08 +1000)]
parisc: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Akinobu Mita [Wed, 4 Apr 2012 00:08:12 +0000 (10:08 +1000)]
ocfs2: use bitmap_weight()
Use bitmap_weight() instead of reinventing the wheel.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Akinobu Mita [Wed, 4 Apr 2012 00:08:12 +0000 (10:08 +1000)]
ocfs2: use find_last_bit()
We already have find_last_bit(). So just use it as described in the
comment.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:11 +0000 (10:08 +1000)]
blackfin: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:11 +0000 (10:08 +1000)]
unicore32: use block_sigmask()
Use the new helper function introduced in commit 5e6292c0f28f ("signal:
add block_sigmask() for adding sigmask to current->blocked") which
centralises the code for updating current->blocked after successfully
delivering a signal and reduces the amount of duplicate code across
architectures. In the past some architectures got this code wrong, so
using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:11 +0000 (10:08 +1000)]
h8300: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:10 +0000 (10:08 +1000)]
score: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:10 +0000 (10:08 +1000)]
MIPS: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:09 +0000 (10:08 +1000)]
microblaze: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:09 +0000 (10:08 +1000)]
microblaze: fix signal masking
There are a couple of problems with the current signal code,
1. If we failed to setup the signal stack frame then we should not be
masking any signals.
2. ka->sa.sa_mask is only added to the current blocked signals list if
SA_NODEFER is set in ka->sa.sa_flags. If we successfully setup the
signal frame and are going to run the handler then we must honour
sa_mask.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:09 +0000 (10:08 +1000)]
microblaze: no need to reset handler if SA_ONESHOT
get_signal_to_deliver() already resets the signal handler if SA_ONESHOT is
set in ka->sa.sa_flags, there's no need to do it again in handle_signal().
Furthermore, because we were modifying ka->sa.sa_handler (which is a copy
of sighand->action[]) instead of sighand->action[] the original code
actually had no effect on signal delivery.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:08 +0000 (10:08 +1000)]
microblaze: don't reimplement force_sigsegv()
Instead of open coding the sequence from force_sigsegv() just call it.
This also fixes a bug because we were modifying ka->sa.sa_handler (which
is a copy of sighand->action[]), whereas the intention of the code was to
modify sighand->action[] directly.
As the original code was working with a copy it had no effect on signal
delivery.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:08 +0000 (10:08 +1000)]
ia64: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Shi [Wed, 4 Apr 2012 00:08:07 +0000 (10:08 +1000)]
percpu: remove percpu_xxx() functions
There are no percpu_xxx callers remaining
Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Christoph Lameter <cl@gentwo.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Shi [Wed, 4 Apr 2012 00:08:07 +0000 (10:08 +1000)]
net: use this_cpu_xxx replace percpu_xxx funcs
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.
And in preempt safe scenario, __this_cpu_xxx funcs has a bit better
performance since __this_cpu_xxx has no redundant preempt_disable()
Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Shi [Wed, 4 Apr 2012 00:08:06 +0000 (10:08 +1000)]
x86: change percpu_read_stable() to this_cpu_read_stable()
It has no function change. It's a preparation for percpu_xxx serial
function change.
Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Christoph Lameter <cl@gentwo.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alex Shi [Wed, 4 Apr 2012 00:08:05 +0000 (10:08 +1000)]
x86: use this_cpu_xxx to replace percpu_xxx funcs
Since percpu_xxx() serial functions are duplicate with this_cpu_xxx().
Removing percpu_xxx() definition and replacing them by this_cpu_xxx() in
code.
And further more, as Christoph Lameter's requirement, I try to use
__this_cpu_xx to replace this_cpu_xxx if it is in preempt safe scenario.
The preempt safe scenarios include:
1, in irq/softirq/nmi handler
2, protected by preempt_disable
3, protected by spin_lock
4, if the code context imply that it is preempt safe, like the code is
follows or be followed a preempt safe code.
BTW, In fact, this_cpu_xxx are same as __this_cpu_xxx since all funcs
implement in a single instruction for x86 machine. But it maybe other
platforms' performance.
[akpm@linux-foundation.org: fix build]
[sfr@canb.auug.org.au: arch/x86/include/asm/desc.h: fix smp_processor_id's need for this_cpu_read] Signed-off-by: Alex Shi <alex.shi@intel.com> Acked-by: Christoph Lameter <cl@gentwo.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:05 +0000 (10:08 +1000)]
cris: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:04 +0000 (10:08 +1000)]
mn10300: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:04 +0000 (10:08 +1000)]
m68k: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:04 +0000 (10:08 +1000)]
m32r: use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.
Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures. In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kyle McMartin <kyle@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:03 +0000 (10:08 +1000)]
avr32: use block_sigmask()
Use the new helper function introduced in commit 5e6292c0f28f ("signal:
add block_sigmask() for adding sigmask to current->blocked") which
centralises the code for updating current->blocked after successfully
delivering a signal and reduces the amount of duplicate code across
architectures.
In the past some architectures got this code wrong, so using this helper
function should stop that from happening again.
Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matt Fleming [Wed, 4 Apr 2012 00:08:03 +0000 (10:08 +1000)]
avr32: don't mask signals in the error path
The current handle_signal() implementation is broken - it will mask
signals if we fail to setup the signal stack frame, which isn't the
desired behaviour, we should only be masking signals if we succeed in
setting up the stack frame. It looks like this code was copied from the
old (broken) arm implementation but wasn't updated when the arm code was
fixed in commit a6c61e9dfdd0 ("[ARM] 3168/1: Update ARM signal delivery
and masking").
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Feuerer [Wed, 4 Apr 2012 00:08:01 +0000 (10:08 +1000)]
acerhdf: lowered default temp fanon/fanoff values
Due to new supported hardware, of which the actual temperature limits of
processor, harddisk and other components are unknown, it feels safer with
lower fanon / fanoff settings.
It won't change much for most people, already using acerhdf, as they use
their own fanon/fanoff variable settings when loading the module.
Furthermore seems like kernel and userspace tools have been improved to
work more efficient and netbooks don't get so hot anymore.
Signed-off-by: Peter Feuerer <peter@piie.net> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log