Eric Nelson [Fri, 30 Jan 2015 21:07:55 +0000 (14:07 -0700)]
ASoC: sgtl5000: add delay before first I2C access
To quote from section 1.3.1 of the data sheet:
The SGTL5000 has an internal reset that is deasserted
8 SYS_MCLK cycles after all power rails have been brought
up. After this time, communication can start
...
1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Jyri Sarha [Mon, 2 Feb 2015 14:48:05 +0000 (16:48 +0200)]
ASoC: tlv320aic3x: Add support for tlv320aic3104
Disables GPIO support and LINE2 input and renames Mic3 input to Mic2,
if tlv320aic3104 mode is seleced. Devicetree binding document is
updated accordingly.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Fri, 30 Jan 2015 19:16:37 +0000 (20:16 +0100)]
ASoC: Add sysfs entries via static attribute groups
Instead of calling device_create_file() manually, assign the static
attribute group entries at the device registration. This simplifies
the error handling and avoids the possible races.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas R-Car sound driver is using snd_ctl_xxx()
functions, but it didn't call snd_ctl free_one() / snd_ctl_remove().
This patch call these functions.
Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Reported-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Mon, 2 Feb 2015 12:38:33 +0000 (14:38 +0200)]
ASoC: davinci-mcasp: Fix DIT only McASP instance support
One of the McASP instances in DM646x line of DMSoC only supports DIT mode.
This means that the given IP does not have support for rx and all the rx
related resources are missing, like irq and DMA request.
The driver should not fail if any or all of the RX resource is missing
when the op_mode is set to DIT mode.
Since RX is not possible in DIT mode, we can just ignore the rx resources
when the McASP is used in DIT mode.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Bo Shen [Mon, 2 Feb 2015 06:44:46 +0000 (14:44 +0800)]
ASoC: atmel-pcm-dma: won't check direction when configure dma
As DMA framework request DMA using direction only in prep_slave
function, (The At91 xdma driver has adapted to this request).
So won't check direction when do DMA configuration.
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Sun, 1 Feb 2015 21:20:47 +0000 (13:20 -0800)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"One more week's worth of fixes. Worth pointing out here are:
- A patch fixing detaching of iommu registrations when a device is
removed -- earlier the ops pointer wasn't managed properly
- Another set of Renesas boards get the same GIC setup fixup as
others have in previous -rcs
- Serial port aliases fixups for sunxi. We did the same to tegra but
we caught that in time before the merge window due to more machines
being affected. Here it took longer for anyone to notice.
- A couple more DT tweaks on sunxi
- A follow-up patch for the mvebu coherency disabling in last -rc
batch"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
ARM: sunxi: dt: Fix aliases
ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i
Linus Torvalds [Sun, 1 Feb 2015 20:23:32 +0000 (12:23 -0800)]
sched: don't cause task state changes in nested sleep debugging
Commit 8eb23b9f35aa ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.
However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).
And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.
In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont. But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.
This fixes both cases:
- don't set TASK_RUNNING when the nested condition happens (note: even
if WARN_ONCE() only _warns_ once, the return value isn't whether the
warning happened, but whether the condition for the warning was true.
So despite the warning only happening once, the "if (WARN_ON(..))"
would trigger for every nested sleep.
- in the cases where we knowingly disable the warning by using
"sched_annotate_sleep()", don't change the task state (that is used
for all core scheduling decisions), instead use '->task_state_change'
that is used for the debugging decision itself.
(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Rafael J Wysocki <rjw@rjwysocki.net> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Ilya Dryomov <ilya.dryomov@inktank.com>, Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com>, Cc: Davidlohr Bueso <dave@stgolabs.net>, Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Sun, 1 Feb 2015 16:51:12 +0000 (08:51 -0800)]
Merge tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4
* tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
Also, one documentation update (da9063), so some devicetrees can now
be verified"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: terminate DMA reads properly
i2c: Only include slave support if selected
i2c: s3c2410: fix ABBA deadlock by keeping clock prepared
i2c: slave-eeprom: fix boundary check when using sysfs
i2c: st: Rename clock reference to something that exists
DT: i2c: Add devices handled by the da9063 MFD driver
Linus Torvalds [Sat, 31 Jan 2015 03:49:44 +0000 (19:49 -0800)]
Merge tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two tiny patches, one fixing up the drivers/Kconfig file, and
one adding a MAINTAINERS entry for the UIO git tree"
* tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers/Kconfig: remove duplicate entry for soc
MAINTAINERS: add git url entry for UIO
Linus Torvalds [Sat, 31 Jan 2015 03:44:56 +0000 (19:44 -0800)]
Merge tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are two tiny staging tree fixes. One for the nvec driver to
resolve a reported problem, and one to add a MAINTAINERS entry for the
Android drivers"
* tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: add Android driver entries
staging: nvec: specify a platform-device base id
Linus Torvalds [Sat, 31 Jan 2015 03:35:35 +0000 (19:35 -0800)]
Merge tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and quirk additions for 3.19-rc7.
All have been in linux-next for a while with no reported problems"
* tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Add OTG PET device to TPL
usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller
uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017
storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converter
usb: phy: never defer probe in non-OF case
usb: dwc2: call dwc2_is_controller_alive() under spinlock
Linus Torvalds [Fri, 30 Jan 2015 22:34:55 +0000 (14:34 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also an event groups fix, two PMU driver
fixes and a CPU model variant addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Tighten (and fix) the grouping condition
perf/x86/intel: Add model number for Airmont
perf/rapl: Fix crash in rapl_scale()
perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization
perf probe: Fix probing kretprobes
perf symbols: Introduce 'for' method to iterate over the symbols with a given name
perf probe: Do not rely on map__load() filter to find symbols
perf symbols: Introduce method to iterate symbols ordered by name
perf symbols: Return the first entry with a given name in find_by_name method
perf annotate: Fix memory leaks in LOCK handling
perf annotate: Handle ins parsing failures
perf scripting perl: Force to use stdbool
perf evlist: Remove extraneous 'was' on error message
Linus Torvalds [Fri, 30 Jan 2015 21:46:04 +0000 (13:46 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and UDF fix from Jan Kara:
"A fix for UDF to properly free preallocated blocks and a fix for quota
so that Q_GETQUOTA quotactl reports correct numbers for XFS filesystem
(and similarly Q_XGETQUOTA quotactl works properly for other
filesystems)"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units
udf: Release preallocation on last writeable close
Linus Torvalds [Fri, 30 Jan 2015 18:45:24 +0000 (10:45 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The ARM changes are largish, but not too scary. And a simple fix for
x86 (bug introduced in 3.19)"
(Paolo sayus these are the "Final" fixes. We'll see).
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: check LAPIC presence when building apic_map
arm/arm64: KVM: Use kernel mapping to perform invalidation on page fault
arm/arm64: KVM: Invalidate data cache on unmap
arm/arm64: KVM: Use set/way op trapping to track the state of the caches
Linus Torvalds [Fri, 30 Jan 2015 18:41:26 +0000 (10:41 -0800)]
Merge tag 'iommu-fixes-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Two small fixes for the Tegra GART IOMMU driver:
- provide a .map_sg function for iommu_ops
- do not register Tegra GART driver as a workaround because of issues
with it when used from DRM code"
* tag 'iommu-fixes-v3.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/tegra: gart: Provide default ->map_sg() callback
iommu/tegra: gart: Do not register with bus
Linus Torvalds [Fri, 30 Jan 2015 18:34:24 +0000 (10:34 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull intel and dp mst drm fixes from Dave Airlie:
"Intel had a few more fixes lined up and no point me sitting on them,
along with a DP MST fix from Rob for a race at undock + vt switch"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fix fb-helper vs MST dangling connector ptrs (v2)
drm/i915: BDW Fix Halo PCI IDs marked as ULT.
drm/i915: Fix and clean BDW PCH identification
drm/i915: Only fence tiled region of object.
drm/i915: fix inconsistent brightness after resume
drm/i915: Init PPGTT before context enable
Wolfram Sang [Thu, 29 Jan 2015 17:33:16 +0000 (18:33 +0100)]
i2c: sh_mobile: terminate DMA reads properly
DMA read requests could miss proper termination, so two more bytes would
have been read via PIO overwriting the end of the buffer with wrong
data. Make DMA stop handling more readable while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Bo Shen [Fri, 30 Jan 2015 09:38:43 +0000 (17:38 +0800)]
ASoC: atmel_ssc_dai: refactor the startup and shutdown
In startup function, enable ssc clock and in shutdown function,
disable clock. And also remove disable ssc in shutdown function,
as ssc is disabled in prepare function.
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Filip Brozovic [Fri, 30 Jan 2015 11:58:24 +0000 (12:58 +0100)]
ASoC: sgtl5000: Use shift mask when setting codec mode
Shift the I2S mode value by the necessary amount before writing the
registers. This makes Right Justified and PCM mode work in addition to
the default Left Justified mode.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 30 Jan 2015 07:32:43 +0000 (09:32 +0200)]
ASoC: rx51: Correct DAPM route for capture
"Mic Bias" is DAPM_SUPPLY so it has to be connected in the route
accordingly.
Fixes audio capture on the board.
Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Mark Brown <broonie@kernel.org>
Arnd Bergmann [Thu, 29 Jan 2015 16:13:46 +0000 (17:13 +0100)]
ASoC: pxa: make TTC DKB tristate
In a rare combination of Kconfig settings, the 88pm860x-codec
module may be selected as a loadable module, while it's also being
used by the ttb-dkb code that is built-in, resulting in a link
error:
sound/built-in.o: In function `ttc_pm860x_init':
:(.text+0x3e888): undefined reference to `pm860x_hs_jack_detect'
:(.text+0x3e898): undefined reference to `pm860x_mic_jack_detect'
Changing ttb-tkb to a tristate option tells Kconfig that 88pm86x
actually needs to be built-in if ttc-dkb is also built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Dave Airlie [Fri, 30 Jan 2015 03:32:24 +0000 (13:32 +1000)]
Merge tag 'drm-intel-fixes-2015-01-29' of git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes, mostly all stable material as well.
* tag 'drm-intel-fixes-2015-01-29' of git://anongit.freedesktop.org/drm-intel:
drm/i915: BDW Fix Halo PCI IDs marked as ULT.
drm/i915: Fix and clean BDW PCH identification
drm/i915: Only fence tiled region of object.
drm/i915: fix inconsistent brightness after resume
drm/i915: Init PPGTT before context enable
Rob Clark [Mon, 26 Jan 2015 15:11:08 +0000 (10:11 -0500)]
drm: fix fb-helper vs MST dangling connector ptrs (v2)
VT switch back/forth from console to xserver (for example) has potential
to go horribly wrong if a dynamic DP MST connector ends up in the saved
modeset that is restored when switching back to fbcon.
When removing a dynamic connector, don't forget to clean up the saved
state.
v1: original
v2: null out set->fb if no more connectors to avoid making i915 cranky
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968 Cc: stable@vger.kernel.org #v3.17+ Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 29 Jan 2015 23:41:27 +0000 (15:41 -0800)]
Merge tag 'dm-3.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"One stable fix for a dm-cache 3.19-rc6 regression and one stable fix
for dm-thin:
- fix DM cache metadata open/lookup error paths to properly use
ERR_PTR and IS_ERR (fixes: 3.19-rc6 "stable" commit 9b1cc9f251)
- fix DM thin-provisioning to disallow userspace from sending
messages to the thin-pool if the pool is in READ_ONLY or FAIL mode
since no metadata changes are allowed in these modes"
* tag 'dm-3.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode
dm cache: fix missing ERR_PTR returns and handling
Linus Torvalds [Thu, 29 Jan 2015 23:18:12 +0000 (15:18 -0800)]
Merge tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable fix for a NFSv4.1 Oops on mount
- Stable fix for an O_DIRECT deadlock condition
- Fix an issue with submounted volumes and fake duplicate inode
numbers"
* tag 'nfs-for-3.19-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix use of nfs_attr_use_mounted_on_fileid()
NFSv4.1: Fix an Oops in nfs41_walk_client_list
nfs: fix dio deadlock when O_DIRECT flag is flipped
Linus Torvalds [Thu, 29 Jan 2015 23:13:56 +0000 (15:13 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"These paches from Ilya finally squash a race condition with layered
images that he's been chasing for a while"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: drop parent_ref in rbd_dev_unprobe() unconditionally
rbd: fix rbd_dev_parent_get() when parent_overlap == 0
Marc Zyngier [Mon, 5 Jan 2015 21:13:24 +0000 (21:13 +0000)]
arm/arm64: KVM: Use kernel mapping to perform invalidation on page fault
When handling a fault in stage-2, we need to resync I$ and D$, just
to be sure we don't leave any old cache line behind.
That's very good, except that we do so using the *user* address.
Under heavy load (swapping like crazy), we may end up in a situation
where the page gets mapped in stage-2 while being unmapped from
userspace by another CPU.
At that point, the DC/IC instructions can generate a fault, which
we handle with kvm->mmu_lock held. The box quickly deadlocks, user
is unhappy.
Instead, perform this invalidation through the kernel mapping,
which is guaranteed to be present. The box is much happier, and so
am I.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Fri, 19 Dec 2014 16:48:06 +0000 (16:48 +0000)]
arm/arm64: KVM: Invalidate data cache on unmap
Let's assume a guest has created an uncached mapping, and written
to that page. Let's also assume that the host uses a cache-coherent
IO subsystem. Let's finally assume that the host is under memory
pressure and starts to swap things out.
Before this "uncached" page is evicted, we need to make sure
we invalidate potential speculated, clean cache lines that are
sitting there, or the IO subsystem is going to swap out the
cached view, loosing the data that has been written directly
into memory.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Marc Zyngier [Fri, 19 Dec 2014 16:05:31 +0000 (16:05 +0000)]
arm/arm64: KVM: Use set/way op trapping to track the state of the caches
Trying to emulate the behaviour of set/way cache ops is fairly
pointless, as there are too many ways we can end-up missing stuff.
Also, there is some system caches out there that simply ignore
set/way operations.
So instead of trying to implement them, let's convert it to VA ops,
and use them as a way to re-enable the trapping of VM ops. That way,
we can detect the point when the MMU/caches are turned off, and do
a full VM flush (which is what the guest was trying to do anyway).
This allows a 32bit zImage to boot on the APM thingy, and will
probably help bootloaders in general.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Linus Torvalds [Thu, 29 Jan 2015 19:48:36 +0000 (11:48 -0800)]
Merge tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This batch ended up being larger than wished, but there is nothing to
worry too much there.
Most of commits are for ASoC, a compress NULL dereference fix, a fix
for probe error handling, and the rest are device-specific fixes. In
addition, we have a fix for a long-standing but of seq-dummy driver,
which just cuts off the buggy part in the end"
* tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq-dummy: remove deadlock-causing events on close
ASoC: omap-mcbsp: Correct CBM_CFS dai format configuration
ASoC: soc-compress.c: fix NULL dereference
ASoC: rt286: set the same format for dac and adc
ASoC: wm8904: fix runtime warning
ASoC: simple-card: Fix crash in asoc_simple_card_unref()
ASoC: fsl: imx-wm8962: Set the card owner field
ASoC: pcm512x: Fix DSP program selection
ASoC: rt5677: Modify the behavior that updates the PLL parameter.
ASoC: fsl_ssi: Fix irq error check
ASoC: rockchip: i2s: applys rate symmetry for CPU DAI
ASoC: Intel: Add NULL checks for the stream pointer
ASoC: wm8960: Fix capture sample rate from 11250 to 11025
ASoC: adi: Add missing return statement.
ASoC: Intel: Don't change offset of block allocator during fixed allocate
ASoC: ts3a227e: Check and report jack status at probe
ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registers
Linus Torvalds [Thu, 29 Jan 2015 19:43:43 +0000 (11:43 -0800)]
Merge tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull final pin control fix from Linus Walleij:
"A late pin control fix for the v3.19 series: The AT91 gpio controller
would miss wakeup events, this single fix make it work properly"
[ "Final"? Yeah, I'll believe that once I've actually released 3.19 ;) - Linus ]
* tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: at91: allow to have disabled gpio bank
Linus Torvalds [Thu, 29 Jan 2015 19:15:17 +0000 (11:15 -0800)]
vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS
The stack guard page error case has long incorrectly caused a SIGBUS
rather than a SIGSEGV, but nobody actually noticed until commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard
page") because that error case was never actually triggered in any
normal situations.
Now that we actually report the error, people noticed the wrong signal
that resulted. So far, only the test suite of libsigsegv seems to have
actually cared, but there are real applications that use libsigsegv, so
let's not wait for any of those to break.
Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laurent Pinchart [Fri, 23 Jan 2015 14:21:49 +0000 (16:21 +0200)]
arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
Commit 4bb25789ed28228a ("arm: dma-mapping: plumb our iommu mapping ops
into arch_setup_dma_ops") moved the setting of the DMA operations from
arm_iommu_attach_device() to arch_setup_dma_ops() where the DMA
operations to be used are selected based on whether the device is
connected to an IOMMU. However, the IOMMU detection scheme requires the
IOMMU driver to be ported to the new IOMMU of_xlate API. As no driver
has been ported yet, this effectively breaks all IOMMU ARM users that
depend on the IOMMU being handled transparently by the DMA mapping API.
Fix this by restoring the setting of DMA IOMMU ops in
arm_iommu_attach_device() and splitting the rest of the function into a
new internal __arm_iommu_attach_device() function, called by
arch_setup_dma_ops().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Thu, 29 Jan 2015 18:51:32 +0000 (10:51 -0800)]
vm: add VM_FAULT_SIGSEGV handling support
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.
That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works. However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.
In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV. And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.
However, when the generic VM layer started propagating the error return
from the stack expansion in commit fee7e49d4514 ("mm: propagate error
from stack expansion even for guard page"), that now exposed the
existing VM_FAULT_SIGBUS result to user space. And user space really
expected SIGSEGV, not SIGBUS.
To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those
duplicate architecture fault handlers about it. They all already have
the code to handle SIGSEGV, so it's about just tying that new return
value to the existing code, but it's all a bit annoying.
This is the mindless minimal patch to do this. A more extensive patch
would be to try to gather up the mostly shared fault handling logic into
one generic helper routine, and long-term we really should do that
cleanup.
Just from this patch, you can generally see that most architectures just
copied (directly or indirectly) the old x86 way of doing things, but in
the meantime that original x86 model has been improved to hold the VM
semaphore for shorter times etc and to handle VM_FAULT_RETRY and other
"newer" things, so it would be a good idea to bring all those
improvements to the generic case and teach other architectures about
them too.
Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Rosin [Thu, 29 Jan 2015 11:21:56 +0000 (12:21 +0100)]
ASoC: pcm512x: Use the correct range constraints for S24_LE
This was overlooked in the late change to remove the I2S padding bits
from S24_LE mode. The patch also limits S32_LE mode to 384kHz, the
maximum according to the datasheets.
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
Arnd Bergmann [Wed, 28 Jan 2015 21:31:30 +0000 (22:31 +0100)]
ASoC: rt5677: fix SPI dependency
The rt5677 codec has gained code that requires SPI to work correctly,
but there is no provision in Kconfig to prevent the driver from
being used when SPI is disabled or a loadable module, resulting
in this build error:
sound/built-in.o: In function `rt5677_spi_write':
:(.text+0xa7ba0): undefined reference to `spi_sync'
sound/built-in.o: In function `rt5677_spi_driver_init':
:(.init.text+0x253c): undefined reference to `spi_register_driver'
This makes the SPI portion of the driver depend on the SPI subsystem,
and disables the function that uses SPI for firmware download if SPI
is disabled. The latter may not be the correct solution, but I could
not come up with a better one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: af48f1d08a54741 ("ASoC: rt5677: Support DSP function for VAD application") Signed-off-by: Mark Brown <broonie@kernel.org>
Arnd Bergmann [Wed, 28 Jan 2015 21:30:01 +0000 (22:30 +0100)]
ASoC: davinci: fix DM365_EVM codec selection
An earlier bug fix of mine made the SND_DM365_VOICE_CODEC symbol
tristate to avoid creating an undefined reference from the
davinci-vcif.c driver to the davinci_soc_platform_register
function that may be in a module.
However, this may now lead to a different error on randconfig
kernels:
This happens because we now have a choice statement with
one bool and one tristate option, and the latter might not
support being set to 'y' because of dependencies.
This new change turns the other option into 'tristate' as well,
which avoids the problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 19926c6de0c3 ("ASoC: davinci: vcif must be a module if SND_DAVINCI_SOC is") Signed-off-by: Mark Brown <broonie@kernel.org>
Magnus Damm [Thu, 29 Jan 2015 07:25:32 +0000 (16:25 +0900)]
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq
domain."), the Lager legacy board support is known to be broken.
The IRQ numbers of the GIC are now virtual, and no longer match the
hardcoded hardware IRQ numbers in the legacy platform board code.
To fix this issue specific to non-multiplatform r8a7790 and Lager:
1) Instantiate the GIC from platform board code and also
2) Skip over the DT arch timer as well as
3) Force delay setup based on DT CPU frequency
With these 3 fixes in place interrupts on Lager are now unbroken.
Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to
him for the initial work.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Magnus Damm [Wed, 28 Jan 2015 12:46:45 +0000 (21:46 +0900)]
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq
domain."), the APE6EVM legacy board support is known to be broken.
The IRQ numbers of the GIC are now virtual, and no longer match the
hardcoded hardware IRQ numbers in the legacy platform board code.
To fix this issue specific to non-muliplatform r8a73a4 and APE6EVM:
1) Instantiate the GIC from platform board code and also
2) Skip over the DT arch timer as well as
3) Force delay setup based on DT CPU frequency
With these 3 fixes in place interrupts on APE6EVM are now unbroken.
Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to
him for the initial work.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Wed, 28 Jan 2015 22:59:33 +0000 (14:59 -0800)]
Merge tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu-fixes-6" from Andrew Lunn:
The previous fix for Armada XP, disabling I/O coherency, broke Armada
375/38x. Only switch the PL310 to I/O coherent mode if I/O coherency
is enabled.
* tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
The WM8904 and WM8918 has the same data type, while the WM8912
has different data type. So, use the data in dt ids table to
distinguish them.
Signed-off-by: Alexander Morozov <linux@meltdown.ru>
[voice.shen@atmel.com: add code to distinguish device type] Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Rosin [Wed, 28 Jan 2015 14:16:11 +0000 (15:16 +0100)]
ASoC: pcm512x: Avoid the PLL for the DAC clock, if possible
The PLL introduces jitter, which in turn introduces noice if used
to clock the DAC. Thus, avoid the PLL output, and use the PLL input
to drive the DAC clock, if possible.
This is described for the PCM5142/PCM5242 chips in the answers to the
forum post "PCM5142/PCM5242 DAC clock source" at the TI E2E community
pages (1).
Peter Rosin [Wed, 28 Jan 2015 14:16:10 +0000 (15:16 +0100)]
ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL
Using the PLL in master mode requires using an external connection
between one of the GPIO pins (configured as PLL/4 output) and the
SCK pin. It also requires the external clock to be fed to some other
GPIO pin instead of the SCK pin.
This is described for the PCM5122 chip in the answers to the forum post
"PCM5122 DAC as I2S master troubles with PLL mode" at the TI E2E
community pages (1). The clocking functionality is also much better
described in the datasheet for the chip PCM5242, which seems to be
register compatible with PCM512x and PCM514x (which both have severely
lacking datasheets).
Peter Rosin [Wed, 28 Jan 2015 14:16:06 +0000 (15:16 +0100)]
ALSA: pcm: Add snd_interval_ranges() and snd_pcm_hw_constraint_ranges()
Add helper functions to allow drivers to specify several disjoint
ranges for a variable. In particular, there is a codec (PCM512x) that
has a hole in its supported range of rates, due to PLL and divider
restrictions.
This is like snd_pcm_hw_constraint_list(), but for ranges instead of
points.
Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
of_match_ptr is already conditionally compiled based on
CONFIG_OF so further conditional compilation is not
required. Remove conditional compilation surrounding
of_match_ptr.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Thomas Petazzoni [Wed, 28 Jan 2015 11:55:45 +0000 (12:55 +0100)]
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
Since commit f2c3c67f00 (merge commit that adds commit "ARM: mvebu:
completely disable hardware I/O coherency"), we disable I/O coherency
on Armada EBU platforms.
However, we continue to initialize the coherency fabric, because this
coherency fabric is needed on Armada XP for inter-CPU
coherency. Unfortunately, due to this, we also continued to execute
the coherency fabric initialization code for Armada 375/38x, which
switched the PL310 into I/O coherent mode. This has the effect of
disabling the outer cache sync operation: this is needed when I/O
coherency is enabled to work around a PCIe/L2 deadlock. But obviously,
when I/O coherency is disabled, having the outer cache sync operation
is crucial.
Therefore, this commit fixes the armada_375_380_coherency_init() so
that the PL310 is switched to I/O coherent mode only if I/O coherency
is enabled.
Without this fix, all devices using DMA are broken on Armada 375/38x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.8+
Joe Thornber [Mon, 26 Jan 2015 11:38:21 +0000 (11:38 +0000)]
dm thin: don't allow messages to be sent to a pool target in READ_ONLY or FAIL mode
You can't modify the metadata in these modes. It's better to fail these
messages immediately than let the block-manager deny write locks on
metadata blocks. Otherwise these failed metadata changes will trigger
'needs_check' to get set in the metadata superblock -- requiring repair
using the thin_check utility.
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Joe Thornber [Wed, 28 Jan 2015 12:07:46 +0000 (12:07 +0000)]
dm cache: fix missing ERR_PTR returns and handling
Commit 9b1cc9f251 ("dm cache: share cache-metadata object across
inactive and active DM tables") mistakenly ignored the use of ERR_PTR
returns. Restore missing IS_ERR checks and ERR_PTR returns where
appropriate.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Ilya Dryomov [Mon, 19 Jan 2015 09:06:14 +0000 (12:06 +0300)]
rbd: drop parent_ref in rbd_dev_unprobe() unconditionally
This effectively reverts the last hunk of 392a9dad7e77 ("rbd: detect
when clone image is flattened").
The problem with parent_overlap != 0 condition is that it's possible
and completely valid to have an image with parent_overlap == 0 whose
parent state needs to be cleaned up on unmap. The next commit, which
drops the "clone image now standalone" logic, opens up another window
of opportunity to hit this, but even without it
leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client
hanging around.
My thinking behind calling rbd_dev_parent_put() unconditionally is that
there shouldn't be any requests in flight at that point in time as we
are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused
by flatten is delayed by in-flight requests, it will have finished by
the time we reach rbd_dev_unprobe() caused by unmap, thus turning
unconditional rbd_dev_parent_put() into a no-op.
Ilya Dryomov [Mon, 19 Jan 2015 15:13:43 +0000 (18:13 +0300)]
rbd: fix rbd_dev_parent_get() when parent_overlap == 0
The comment for rbd_dev_parent_get() said
* We must get the reference before checking for the overlap to
* coordinate properly with zeroing the parent overlap in
* rbd_dev_v2_parent_info() when an image gets flattened. We
* drop it again if there is no overlap.
but the "drop it again if there is no overlap" part was missing from
the implementation. This lead to absurd parent_ref values for images
with parent_overlap == 0, as parent_ref was incremented for each
img_request and virtually never decremented.
Fix this by leveraging the fact that refresh path calls
rbd_dev_v2_parent_info() under header_rwsem and use it for read in
rbd_dev_parent_get(), instead of messing around with atomics. Get rid
of barriers in rbd_dev_v2_parent_info() while at it - I don't see what
they'd pair with now and I suspect we are in a pretty miserable
situation as far as proper locking goes regardless.
Peter Zijlstra [Fri, 23 Jan 2015 10:19:48 +0000 (11:19 +0100)]
perf: Tighten (and fix) the grouping condition
The fix from 9fc81d87420d ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.
Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.
Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.
Fixes: 9fc81d87420d ("perf: Fix events installation during moving group") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
The fix is simple. Just put the parenthesis where it needs
to be, i.e., around rapl_pmu. To my surprise, the compiler
was not complaining about passing an integer instead of a
pointer.
Kan Liang [Tue, 20 Jan 2015 04:54:25 +0000 (04:54 +0000)]
perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization
There were some issues about the uncore driver tried to access
non-existing boxes, which caused boot crashes. These issues have
been all fixed. But we should avoid boot failures if that ever
happens again.
This patch intends to prevent this kind of potential issues.
It moves uncore_box_init out of driver initialization. The box
will be initialized when it's first enabled.
Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421729665-5912-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
projects / karo-tx-linux.git / log