Arnd Bergmann [Fri, 23 Jun 2017 10:28:34 +0000 (12:28 +0200)]
arm64: dts: mediatek: don't include missing file
This resolves a build error in the next/dt branch:
In file included from arch/arm64/boot/dts/mediatek/mt6797-evb.dts:16:0:
arch/arm64/boot/dts/mediatek/mt6797.dtsi:15:10: fatal error: dt-bindings/power/mt6797-power.h: No such file or directory
003f5d0c3462 ("arm64: dts: mediatek: add clk and scp nodes for MT6797") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Mon, 19 Jun 2017 06:07:59 +0000 (23:07 -0700)]
Merge tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
The Freescale arm64 device tree updates for 4.13:
- A series from NXP employee Li Yang that updates the copyright claims
to comply with company policy.
- A patch-set from Madalin Bucur that adds Data Path Acceleration
Architecture (DPAA) QBMan and FMan. Quite a few .dtsi files are
created for SoCs with different DPAA configuration to include the
devices as needed.
- Enable UHS-I SD and eMMC support for LS1046A and LS208xA RDB/QDS
boards.
- Enable TMU device for thermal management support on LS1088A.
- Update SATA device node for LS1088A with correct compatible and ECC
register bit.
- A few small random device tree updates.
* tag 'imx-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: dts: ls1088a: update sata node
dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list
arm64: dts: ls1012a: Add coreclk
arm64: dts: ls1046a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls208xa: disable SD UHS-I modes by default on RDB
arm64: dts: ls1043a: Add generic compatible string for I2C EEPROM
arm64: dts: add LS1046A DPAA FMan nodes
arm64: dts: add LS1043A DPAA FMan support
arm64: dts: add DPAA FMan nodes
arm64: dts: add LS1046A DPAA QBMan nodes
arm64: dts: add LS1043A DPAA QBMan nodes
arm64: dts: add DPAA QBMan portals
arm64: dts: ls1088a: Add TMU device tree support
arm64: dts: ls1088a: update the sata node
arm64: dts: Add flash node for ls1088a qds and rdb
arm64: dts: ls1088a: add esdhc node
arm64: dts: ls1012a: add eSDHC nodes
arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
mmc: dt: add compatible into eSDHC required properties
...
Olof Johansson [Mon, 19 Jun 2017 05:59:47 +0000 (22:59 -0700)]
Merge tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.13 (part 1)
- Improve the mcbin support (Armada 8040 based board): add sdhci and
the second 1G port
- Improve crypro nodes description on Aramda 7K/8K
- Use new binding for ap806 clocks
- Improve mdio nodes and add xmdio on Aramda 7K/8K
- Add second SGCI node on Armada 37xx
- Improve the description of the Armada 3720 DB board
* tag 'mvebu-dt64-4.13-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot
arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx
arm64: dts: marvell: armada-37xx: Use angle bracket for each register set
arm64: dts: marvell: armada-37xx: Align the compatible string
arm64: dts: marvell: armada-3720-db: Add information about the V2 board
arm64: dts: marvell: armada-3720-db: Sort the dts node alphabetically
arm64: dts: marvell: disable the mdio nodes by default
arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB
arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k
arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet
arm64: dts: marvell: cp110: add required clocks for mdio interface
arm64: dts: marvell: use new binding for the system controller on ap806
arm64: dts: marvell: remove clock-output-names on ap806
arm64: dts: marvell: add second 1G port on the Armada 8040 DB
arm64: dts: marvell: mcbin: add sdhci
arm64: dts: marvell: add clocks for Armada AP806 XOR engines
Olof Johansson [Mon, 19 Jun 2017 05:40:59 +0000 (22:40 -0700)]
Merge tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Second Round of Renesas ARM64 Based SoC DT Updates for v4.13
* Add reset control properties for audio to r9a779[56] SoCs
* Add add DMA for IIC_DVFS to r9a779[56] SoCs
* Add support for Salvator-XS and H3ULCB with R-Car H3 (r8a7795) ES2
* Add missing index to PWM pinctrl subnode name to Salvator-X board
* Add 12288000 for sound ADG to Salvator-X and ULCB boards
* tag 'renesas-arm64-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7796: Add reset control properties for audio
arm64: dts: r8a7795: Add reset control properties for audio
arm64: dts: renesas: Add support for Salvator-XS with R-Car H3 ES2.0
arm64: dts: renesas: Add common Salvator-XS board support
arm64: dts: renesas: Extract common Salvator-X/XS board support
arm64: dts: salvator-x: Add missing index to PWM pinctrl subnode name
arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
arm64: dts: r8a7796: add DMA for IIC_DVFS
arm64: dts: r8a7795: add DMA for IIC_DVFS
arm64: dts: ulcb: add 12288000 for sound ADG
arm64: dts: salvator-x: add 12288000 for sound ADG
Olof Johansson [Mon, 19 Jun 2017 05:28:48 +0000 (22:28 -0700)]
Merge tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64
Qualcomm ARM64 Updates for v4.13
* Fix APQ8016 SBC WLAN LED
* Add MSM8996 CPU node
* Add MSM8992 SMEM and fixed regulator
* Fixup MSM8916 USB support
* tag 'qcom-arm64-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: apq8016-sbc: Correct WLAN LED default-trigger
arm64: dts: msm8996: Add CPU clock controller node
arm64: dts: smem enablement for msm8992
arm64: dts: msm8992 add fixed regulator
arm64: dts: qcom: Collapse usb support into one node
Olof Johansson [Mon, 19 Jun 2017 04:02:19 +0000 (21:02 -0700)]
Merge tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.13-rc1
This adds the CCPLEX cluster on Tegra186, which is used to initiate CPU
frequency and voltage transitions.
Also included is a bit of cleanup for PCI related device tree content,
in preparation for a future DTC release that has additional checks for
the PCI bus.
* tag 'tegra-for-4.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: dts: nvidia: fix PCI bus dtc warnings
arm64: tegra: Add CCPLEX_CLUSTER area in Tegra186
Olof Johansson [Mon, 19 Jun 2017 03:56:42 +0000 (20:56 -0700)]
Merge tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon SoC DT updates for 4.13
- Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
Hi3660 MMC binding
- Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
sd/sdio and WiFi
- Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
Hikey board
* tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
arm64: dts: hi3660-hikey960: add nodes for WiFi
arm64: dts: hi3660: add sd/sdio device nodes
dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
arm64: dts: hikey960: add device node for pmic and regulators
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
arm64: dts: hisi: add kirin pcie node
dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
arm64: dts: hi3660: add sp804 timer node
arm64: dts: hi3660: add spi device nodes
arm64: dts: hikey960: add LED nodes
arm64: dts: hi3660: add power key dts node
arm64: dts: hi3660: Add pl031 rtc node
arm64: dts: hikey960: add WL1837 Bluetooth device node
arm64: dts: hi3660: Add uarts nodes
arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
arm64: dts: Add I2C nodes for Hi3660
arm64: dts: hi3660: add resources for clock and reset
arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
arm64: dts: hisilicon: update compatible string for hikey960
...
Olof Johansson [Mon, 19 Jun 2017 03:55:51 +0000 (20:55 -0700)]
Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
ARMv8 Vexpress/Juno DT updates for v4.13
1. Adds support for Coresight CPU debug MMIO interface on all Juno variants.
2. Enables support for few SMMUs on Juno which were previously disabled
waiting for IOMMU-backed DMA API support to be stabilised.
* tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: enable some SMMUs
arm64: dts: juno: add coresight CPU debug nodes
Olof Johansson [Mon, 19 Jun 2017 03:45:17 +0000 (20:45 -0700)]
Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner H5 DT changes for 4.13
Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2
* tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
arm64: allwinner: h5: sort the device nodes in / part for some boards
arm64: allwinner: h5: add support for NanoPi NEO2 board
arm64: allwinner: h5: add support for Orange Pi Prime board
arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
Olof Johansson [Mon, 19 Jun 2017 03:41:35 +0000 (20:41 -0700)]
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner arm64 DT changes for 4.13
Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.
* tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
arm64: allwinner: a64: add device tree for SoPine with baseboard
arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
arm64: allwinner: pine64-plus: Enable dwmac-sun8i
arm64: allwinner: pine64: Enable dwmac-sun8i
arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
arm64: allwinner: a64: add DTSI file for SoPine SoM
arm64: allwinner: a64: Convert CCU raw number references to macros
arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
arm64: allwinner: a64: enable RSB on A64
arm64: dts: allwinner: pine64: Add remaining UART aliases
arm64: dts: allwinner: a64: Add UART2 pin nodes
arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
Olof Johansson [Mon, 19 Jun 2017 03:18:44 +0000 (20:18 -0700)]
Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:
I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.
- Anup documents the Broadcom Stingray binding, common clocks, adds initial
support for the Stingray DTSI and DTS files and adds support for the PL022,
PL330 and SP805
- Sandeep adds the clock nodes to the Stingray Device Tree nodes
- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
- Oza adds I2C Device Tree nodes to the Stingray DTSes
- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
- Ravijeta adds support for the USB Dual Role PHY on Northstar 2
- Gerd starts adding references to the sdhost and sdhci controllers, and then
switches the sdcard to to use the SDHOST (faster than SDHCI)
- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
thermal driver to work correctly
* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add USB DRD PHY device tree node
ARM64: dts: bcm2837: Define CPU thermal coefficients
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
arm64: dts: Add I2C DT nodes for Stingray SoC
arm64: dts: Add GPIO DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
arm64: dts: Initial DTS files for Broadcom Stingray SOC
dt-bindings: clk: Extend binding doc for Stingray SOC
dt-bindings: bcm: Add Broadcom Stingray bindings document
ARM: dts: bcm283x: switch from &sdhci to &sdhost
arm64: dts: bcm2837: add &sdhci and &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Olof Johansson [Mon, 19 Jun 2017 03:12:57 +0000 (20:12 -0700)]
Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64
UniPhier ARM64 SoC DT updates for v4.13
- specify timing delay properties of eMMC
- fix W=1 build warnings
- increase memory reserve size
- use SPDX License Identifier
- add new board support (LD11/LD20 global)
* tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add support for LD20 Global board
arm64: dts: uniphier: add support for LD11 Global board
arm64: dts: uniphier: use SPDX-License-Identifier
arm64: dts: uniphier: reserve more memory for LD11/LD20
arm64: dts: uniphier: fix simple-bus unit address format error
arm64: dts: uniphier: Use - instead of @ for DT OPP entries
arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
Olof Johansson [Mon, 19 Jun 2017 02:35:00 +0000 (19:35 -0700)]
Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64
Add device tree nodes for
mt8173:
- split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
- move USB phy clocks up in hierarchy to met new bindings description
- move MDP nodes up in hierarchy to met new bindings description
mt6797:
- add basic SoC support
- add clock driver
- add power domain
dt-bindings:
- clean-up i2c binding description
- add binding for mt2701 i2c node
- add fallback compatible to scpsys binding description
- add bindings description for mt7622 and mt6796
* tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
arm64: dts: mt8173: Fix mdp device tree
dt-bindings: i2c: Add Mediatek MT2701 i2c binding
dt-bindings: i2c-mtk: Add mt7623 binding
dt-bindings: i2c-mtk: Delete bindings
dt-bindings: i2c-mt6577: Rename file to reflect bindings
dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
arm64: dts: mediatek: add clk and scp nodes for MT6797
dt-bindings: mediatek: add MT6797 power dt-bindings
arm64: dts: mediatek: add mt6797 support
dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
arm64: dts: mt8173: move clock from phy node into port nodes
arm64: dts: mt8173: split usb SuperSpeed port into two ports
Olof Johansson [Mon, 19 Jun 2017 02:11:03 +0000 (19:11 -0700)]
Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Samsung DeviceTree ARM64 update for v4.13:
1. Remove unneeded TE interrupt gpio property.
* tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
Olof Johansson [Mon, 19 Jun 2017 02:08:10 +0000 (19:08 -0700)]
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Support for the new rk3399 firefly board; extending the pcie ranges to
make usage of pci switches possible; some more qos and pinctrl nodes on
rk3399; updates for the rk3399 cpu operating points including separate
opps for the higher rates OP1 variant of the chip and mmc-nodes for
the rk3328.
* tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update common rk3399 operating points
arm64: dts: rockchip: introduce rk3399-op1 operating points
arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
arm64: dts: rockchip: add ethernet0 alias on rk3399
arm64: dts: rockchip: bring rk3399-firefly power-tree in line
arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
arm64: dts: rockchip: add some missing qos nodes on rk3399
arm64: dts: rockchip: add support for firefly-rk3399 board
dt-bindings: add firefly-rk3399 board support
Antoine Tenart [Thu, 15 Jun 2017 14:43:26 +0000 (16:43 +0200)]
arm64: dts: marvell: add xmdio nodes for 7k/8k
Add the description of the xMDIO bus for the Marvell Armada 7k and
Marvell Armada 8k; for both CP110 slave and master. This bus is found
on Marvell Ethernet controllers and provides an interface with the
xMDIO bus.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Antoine Tenart [Thu, 15 Jun 2017 12:10:04 +0000 (14:10 +0200)]
arm64: dts: marvell: add a comment on the cp110 slave node status
The cryptographic engine found on the cp110 slave is disabled by default
because of some known limitations. Add a comment to explain why it is
disabled by default.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx
The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second
one.
Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces.
The second interface is using pluggable module that can either
have an SD connector or eMMC on it.
This patch adds support for SD module in the device DT.
[ gregory.clement@free-electrons.com:
- Add more detail in commit log
- Sort the dt node in address order
- Document the SD slot in the dts ]
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Gregory CLEMENT [Thu, 8 Jun 2017 13:51:56 +0000 (15:51 +0200)]
arm64: dts: marvell: armada-3720-db: Add information about the V2 board
The initial device tree file was for the board V1.4. Now the V2.0 board
is also available. The same dtb will work for both, but the CON number
have changed, so update the comment in the dts to reflect this.
Antoine Tenart [Thu, 8 Jun 2017 10:04:54 +0000 (12:04 +0200)]
arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB
Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell
Armada 8k DB. This is needed as the MDIO nodes will be disabled in the
CP 110 slave and master dtsi by a following up patch.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Antoine Tenart [Wed, 24 May 2017 14:10:33 +0000 (16:10 +0200)]
arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k
The EIP197 cryptographic engine supports 64 bits address width but is
limited to 40 bits on 7k/8k. Add a dma-mask property in the
cryptographic engine nodes to reflect this.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Russell King [Tue, 6 Jun 2017 09:57:15 +0000 (11:57 +0200)]
arm64: dts: marvell: cp110: add required clocks for mdio interface
Add the three required clocks for the MDIO interface to be functional
on Armada 8k platforms. Without this, the CPU hangs, causing RCU
stalls or the system to become unresponsive.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[Thomas:
- remove mg_core_clock, since it's a parent of mg_clock
- also add clock references to the slave CP mdio instance] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Marcin Wojtas [Mon, 15 May 2017 23:28:33 +0000 (01:28 +0200)]
arm64: dts: marvell: add second 1G port on the Armada 8040 DB
Armada 8040 DB is equipped with 4 (2x 10G SFI + 2x 1G RGMII)
ethernet ports of which only one was hitherto enabled.
Because currently mvpp2 driver is capable of supporting only
1G RGMII/SGMII, enable second port from CP slave HW block.
Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
arm64: dts: marvell: add clocks for Armada AP806 XOR engines
The XORv2 engines in the AP side of the Armada 7K/8K SoCs are using the
AP MS core clock as input, so this commit adds the appropriate clocks
properties.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
John Stultz [Wed, 14 Jun 2017 18:25:17 +0000 (11:25 -0700)]
arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
Add entry for k3-dma driver and i2s/hdmi audio devices.
This enables HDMI audio output.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
v2:
* Split core i2s entry into dtsi and hdmi specific bits into
hikey dts
v4:
* Rework simple-card to use many-dai-links method, as
there may be other links in the future
v5:
* Rework audio description to use the audio-card-graph method
as requested by Mark. Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Leo Yan [Thu, 15 Jun 2017 03:04:10 +0000 (11:04 +0800)]
arm64: dts: hi3660: add sp804 timer node
The Hi3660 SoC comes with the sp804 timer in addition to the
architecture timers. These ones are shutdown when reaching a deep idle
states and a backup timer is needed. The sp804 belongs to another power
domain and can fulfill the purpose of replacing temporarily an
architecture timer when the CPU is idle.
Describe it in the device tree, so it can be enabled at boot time.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Chen Jun [Thu, 15 Jun 2017 03:04:07 +0000 (11:04 +0800)]
arm64: dts: hi3660: add power key dts node
We use gpio_034 as power key on hikey960, and set gpio with pull-up
state, when key press the voltage on the gpio will come to lower, and
power key event will be reported.
Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Chen Feng [Thu, 15 Jun 2017 03:04:04 +0000 (11:04 +0800)]
arm64: dts: hi3660: Add uarts nodes
Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.
On HiKey960:
- UART6 is used as default console, and is wired out through low speed
expansion connector.
- UART3 has RTS/CTS hardware handshake, and is wired out through low
speed expansion connector.
- UART5 is not used in commercial launched boards. So disable it.
- UART4 is connected to Bluetooth, WL1837.
Wang Xiaoyin [Thu, 15 Jun 2017 03:04:00 +0000 (11:04 +0800)]
arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
This commit adds more pinmux and pinctrl information for devices
on HiKey960, including i2c, spi, cam, uart, ufs, pcie, csi, pwr_key,
isp, sd/sdio, i2s, and usb.
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> Signed-off-by: Chen Jun <chenjun14@huawei.com> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Florian Fainelli [Tue, 13 Jun 2017 19:39:57 +0000 (12:39 -0700)]
Merge tag 'bcm2835-dt-64-next-2017-06-08' into devicetree-arm64/next
This pull request brings in the switch to sdhost for MMC on RPi3
(improving storage performance and leaving sdhci for wireless), and
the correct CPU thermal coefficients.
The thermal changes required a merge from bcm2835-dt-next, where the
nodes were added.
arm64: dts: renesas: Add common Salvator-XS board support
The Renesas Salvator-XS (Salvator-X 2nd version) development board can
be equipped with either an R-Car H3 ES2.0 or M3-W ES1.x SiP, which are
pin-compatible.
Add initial support for the common parts of the Salvator-XS board into
its own .dtsi file, to be included by the DTSes for the H3/M3-W
versions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arm64: dts: renesas: Extract common Salvator-X/XS board support
The Renesas Salvator-X and Salvator-XS (Salvator-X 2nd version) boards
are very similar. To avoid duplication, prepare for the advent of the
latter by extracting the common board parts into its own .dtsi file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arm64: dts: r8a7795: h3ulcb: Add support for R-Car H3 ES2.0
Split off support for H3ULCB boards with the ES1.x revision of the R-Car
H3 SoC into a separate file. The main r8a7795-h3ulcb.dts file now
corresponds to H3ULCB with R-Car H3 ES2.0 or later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Current rcar_sound only has 11289600 (= for 44.1kHz) clock-frequency,
but it needs 12288000 for 48kHz too.
Otherwise, 48kHz based sound can't handle correctly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arm64: dts: salvator-x: add 12288000 for sound ADG
Current rcar_sound only has 11289600 (= for 44.1kHz) clock-frequency,
but it needs 12288000 for 48kHz too.
Otherwise, 48kHz based sound can't handle correctly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Daniel Kurtz [Tue, 23 May 2017 03:24:10 +0000 (11:24 +0800)]
arm64: dts: mt8173: Fix mdp device tree
If the mdp_* nodes are under an mdp sub-node, their corresponding
platform device does not automatically get its iommu assigned properly.
Fix this by moving the mdp component nodes up a level such that they are
siblings of mdp and all other SoC subsystems. This also simplifies the
device tree.
Although it fixes iommu assignment issue, it also break compatibility
with old device tree. So, the patch in driver is needed to iterate over
sibling mdp device nodes, not child ones, to keep driver work properly.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Mon, 22 May 2017 09:40:20 +0000 (11:40 +0200)]
dt-bindings: i2c-mtk: Delete bindings
The bindings file list bindings for mt1827 and mt8135 but
these bindings are not supported by the driver. Remove the bindings.
Also do some minor style changes to the compatible documentation
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de>
Masahiro Yamada [Mon, 5 Jun 2017 03:57:59 +0000 (12:57 +0900)]
arm64: dts: uniphier: use SPDX-License-Identifier
Follow the recent trend for the license description, and fix the wrongly
stated X11 to MIT.
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
Masahiro Yamada [Fri, 26 May 2017 08:18:15 +0000 (17:18 +0900)]
arm64: dts: uniphier: reserve more memory for LD11/LD20
Reserve enough space below the kernel base.
The assumed address map is: 80000000 - 80ffffff : for IPP 81000000 - 81ffffff : for ARM secure 82000000 - : for Linux
Icenowy Zheng [Wed, 7 Jun 2017 00:23:05 +0000 (08:23 +0800)]
arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
Add the required DT parts to enable Ethernet (dwmac-sun8i driver) on
the Nano Pi NEO2 board. It uses an external Realtek RTL8211E PHY
connected via RGMII to provide GbE network. Specially unlike other
Allwinner boards, the phy is connected to MDIO address 7, not 1.
This includes the regulator (which is controlled by a GPIO pin) and
the actual Ethernet MAC node, referring the RGMII pins of the device.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Icenowy Zheng [Wed, 7 Jun 2017 00:23:04 +0000 (08:23 +0800)]
arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
Add the required DT parts to enable Ethernet (dwmac-sun8i driver) on
the Orange Pi Prime board. It uses an external Realtek RTL8211E PHY
connected via RGMII to provide GbE network.
This includes the regulator (which is controlled by a GPIO pin) and
the actual Ethernet MAC node, referring the RGMII pins of the device.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Icenowy Zheng [Wed, 7 Jun 2017 00:23:03 +0000 (08:23 +0800)]
arm64: allwinner: h5: sort the device nodes in / part for some boards
The reg_vcc3v3 node is wrongly placed at the start of the / part, but
not with other fixed regulators used by the board, which makes the
device nodes unsorted.
As Orange Pi Prime and Nano Pi NEO2 device trees are copy'n'paste works,
they share the device node unsorted issue.
Fix this by move reg_vcc3v3 node to the position before reg_usb0_vbus.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
projects / karo-tx-linux.git / log