karo-tx-linux.git
3 years agoMerge remote-tracking branch 'remotes/stable/linux-4.4.y' into karo-tx6-mainline karo-tx6-stable v4.4.15-KARO
Lothar Waßmann [Tue, 12 Jul 2016 09:14:35 +0000 (11:14 +0200)]
Merge remote-tracking branch 'remotes/stable/linux-4.4.y' into karo-tx6-mainline

3 years agoLinux 4.4.15
Greg Kroah-Hartman [Mon, 11 Jul 2016 16:31:24 +0000 (09:31 -0700)]
Linux 4.4.15

3 years agousb: dwc3: exynos: Fix deferred probing storm.
Steinar H. Gunderson [Tue, 24 May 2016 18:13:15 +0000 (20:13 +0200)]
usb: dwc3: exynos: Fix deferred probing storm.

commit 4879efb34f7d49235fac334d76d9c6a77a021413 upstream.

dwc3-exynos has two problems during init if the regulators are slow
to come up (for instance if the I2C bus driver is not on the initramfs)
and return probe deferral. First, every time this happens, the driver
leaks the USB phys created; they need to be deallocated on error.

Second, since the phy devices are created before the regulators fail,
this means that there's a new device to re-trigger deferred probing,
which causes it to essentially go into a busy loop of re-probing the
device until the regulators come up.

Move the phy creation to after the regulators have succeeded, and also
fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs
which doesn't contain the I2C driver), this reduces the number of probe
attempts (for each of the two controllers) from more than 2000 to eight.

Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com>
Fixes: d720f057fda4 ("usb: dwc3: exynos: add nop transceiver support")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: host: ehci-tegra: Grab the correct UTMI pads reset
Thierry Reding [Thu, 26 May 2016 15:23:29 +0000 (17:23 +0200)]
usb: host: ehci-tegra: Grab the correct UTMI pads reset

commit f8a15a9650694feaa0dabf197b0c94d37cd3fb42 upstream.

There are three EHCI controllers on Tegra SoCs, each with its own reset
line. However, the first controller contains a set of UTMI configuration
registers that are shared with its siblings. These registers will only
be reset as part of the first controller's reset. For proper operation
it must be ensured that the UTMI configuration registers are reset
before any of the EHCI controllers are enabled, irrespective of the
probe order.

Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to
broken USB") introduced code that ensures the first controller is always
reset before setting up any of the controllers, and is never again reset
afterwards.

This code, however, grabs the wrong reset. Each EHCI controller has two
reset controls attached: 1) the USB controller reset and 2) the UTMI
pads reset (really the first controller's reset). In order to reset the
UTMI pads registers the code must grab the second reset, but instead it
grabbing the first.

Fixes: a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to broken USB")
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: gadget: fix spinlock dead lock in gadgetfs
Bin Liu [Thu, 26 May 2016 16:43:45 +0000 (11:43 -0500)]
usb: gadget: fix spinlock dead lock in gadgetfs

commit d246dcb2331c5783743720e6510892eb1d2801d9 upstream.

[   40.467381] =============================================
[   40.473013] [ INFO: possible recursive locking detected ]
[   40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted
[   40.483466] ---------------------------------------------
[   40.489098] usb/733 is trying to acquire lock:
[   40.493734]  (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs]
[   40.502882]
[   40.502882] but task is already holding lock:
[   40.508967]  (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs]
[   40.517811]
[   40.517811] other info that might help us debug this:
[   40.524623]  Possible unsafe locking scenario:
[   40.524623]
[   40.530798]        CPU0
[   40.533346]        ----
[   40.535894]   lock(&(&dev->lock)->rlock);
[   40.540088]   lock(&(&dev->lock)->rlock);
[   40.544284]
[   40.544284]  *** DEADLOCK ***
[   40.544284]
[   40.550461]  May be due to missing lock nesting notation
[   40.550461]
[   40.557544] 2 locks held by usb/733:
[   40.561271]  #0:  (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48
[   40.569219]  #1:  (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs]
[   40.578523]
[   40.578523] stack backtrace:
[   40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37
[   40.590246] Hardware name: Generic AM33XX (Flattened Device Tree)
[   40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14)
[   40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4)
[   40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994)
[   40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238)
[   40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c)
[   40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs])
[   40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc])
[   40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc])
[   40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs])
[   40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110)
[   40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114)
[   40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c)
[   40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c)

This is caused by the spinlock bug in ep0_read().
Fix the two other deadlock sources in gadgetfs_setup() too.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoUSB: mos7720: delete parport
Sudip Mukherjee [Mon, 30 May 2016 13:46:33 +0000 (19:16 +0530)]
USB: mos7720: delete parport

commit dcb21ad4385731b7fc3ef39d255685f2f63c8c5d upstream.

parport subsystem has introduced parport_del_port() to delete a port
when it is going away. Without parport_del_port() the registered port
will not be unregistered.
To reproduce and verify the error:
Command to be used is : ls /sys/bus/parport/devices
1) without the device attached there is no output as there is no
registered parport.
2) Attach the device, and the command will show "parport0".
3) Remove the device and the command still shows "parport0".
4) Attach the device again and we get "parport1".

With the patch applied:
1) without the device attached there is no output as there is no
registered parport.
2) Attach the device, and the command will show "parport0".
3) Remove the device and there is no output as "parport0" is now
removed.
4) Attach device again to get "parport0" again.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoxhci: Fix handling timeouted commands on hosts in weird states.
Mathias Nyman [Wed, 1 Jun 2016 15:09:08 +0000 (18:09 +0300)]
xhci: Fix handling timeouted commands on hosts in weird states.

commit 3425aa03f484d45dc21e0e791c2f6c74ea656421 upstream.

If commands timeout we mark them for abortion, then stop the command
ring, and turn the commands to no-ops and finally restart the command
ring.

If the host is working properly the no-op commands will finish and
pending completions are called.
If we notice the host is failing, driver clears the command ring and
completes, deletes and frees all pending commands.

There are two separate cases reported where host is believed to work
properly but is not. In the first case we successfully stop the ring
but no abort or stop command ring event is ever sent and host locks up.

The second case is if a host is removed, command times out and driver
believes the ring is stopped, and assumes it will be restarted, but
actually ends up timing out on the same command forever.
If one of the pending commands has the xhci->mutex held it will block
xhci_stop() in the remove codepath which otherwise would cleanup pending
commands.

Add a check that clears all pending commands in case host is removed,
or we are stuck timing out on the same command. Also restart the
command timeout timer when stopping the command ring to ensure we
recive an ring stop/abort event.

Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoUSB: xhci: Add broken streams quirk for Frescologic device id 1009
Hans de Goede [Wed, 1 Jun 2016 19:01:29 +0000 (21:01 +0200)]
USB: xhci: Add broken streams quirk for Frescologic device id 1009

commit d95815ba6a0f287213118c136e64d8c56daeaeab upstream.

I got one of these cards for testing uas with, it seems that with streams
it dma-s all over the place, corrupting memory. On my first tests it
managed to dma over the BIOS of the motherboard somehow and completely
bricked it.

Tests on another motherboard show that it does work with streams disabled.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: xhci-plat: properly handle probe deferral for devm_clk_get()
Thomas Petazzoni [Wed, 1 Jun 2016 15:09:09 +0000 (18:09 +0300)]
usb: xhci-plat: properly handle probe deferral for devm_clk_get()

commit de95c40d5beaa47f6dc8fe9ac4159b4672b51523 upstream.

On some platforms, the clocks might be registered by a platform
driver. When this is the case, the clock platform driver may very well
be probed after xhci-plat, in which case the first probe() invocation
of xhci-plat will receive -EPROBE_DEFER as the return value of
devm_clk_get().

The current code handles that as a normal error, and simply assumes
that this means that the system doesn't have a clock for the XHCI
controller, and continues probing without calling
clk_prepare_enable(). Unfortunately, this doesn't work on systems
where the XHCI controller does have a clock, but that clock is
provided by another platform driver. In order to fix this situation,
we handle the -EPROBE_DEFER error condition specially, and abort the
XHCI controller probe(). It will be retried later automatically, the
clock will be available, devm_clk_get() will succeed, and the probe()
will continue with the clock prepared and enabled as expected.

In practice, such issue is seen on the ARM64 Marvell 7K/8K platform,
where the clocks are registered by a platform driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoxhci: Cleanup only when releasing primary hcd
Gabriel Krisman Bertazi [Wed, 1 Jun 2016 15:09:07 +0000 (18:09 +0300)]
xhci: Cleanup only when releasing primary hcd

commit 27a41a83ec54d0edfcaf079310244e7f013a7701 upstream.

Under stress occasions some TI devices might not return early when
reading the status register during the quirk invocation of xhci_irq made
by usb_hcd_pci_remove.  This means that instead of returning, we end up
handling this interruption in the middle of a shutdown.  Since
xhci->event_ring has already been freed in xhci_mem_cleanup, we end up
accessing freed memory, causing the Oops below.

commit 8c24d6d7b09d ("usb: xhci: stop everything on the first call to
xhci_stop") is the one that changed the instant in which we clean up the
event queue when stopping a device.  Before, we didn't call
xhci_mem_cleanup at the first time xhci_stop is executed (for the shared
HCD), instead, we only did it after the invocation for the primary HCD,
much later at the removal path.  The code flow for this oops looks like
this:

xhci_pci_remove()
usb_remove_hcd(xhci->shared)
        xhci_stop(xhci->shared)
  xhci_halt()
xhci_mem_cleanup(xhci);  // Free the event_queue
usb_hcd_pci_remove(primary)
xhci_irq()  // Access the event_queue if STS_EINT is set. Crash.
xhci_stop()
xhci_halt()
// return early

The fix modifies xhci_stop to only cleanup the xhci data when releasing
the primary HCD.  This way, we still have the event_queue configured
when invoking xhci_irq.  We still halt the device on the first call to
xhci_stop, though.

I could reproduce this issue several times on the mainline kernel by
doing a bind-unbind stress test with a specific storage gadget attached.
I also ran the same test over-night with my patch applied and didn't
observe the issue anymore.

[  113.334124] Unable to handle kernel paging request for data at address 0x00000028
[  113.335514] Faulting instruction address: 0xd00000000d4f767c
[  113.336839] Oops: Kernel access of bad area, sig: 11 [#1]
[  113.338214] SMP NR_CPUS=1024 NUMA PowerNV

[c000000efe47ba90c000000000720850 usb_hcd_irq+0x50/0x80
[c000000efe47bac0c00000000073d328 usb_hcd_pci_remove+0x68/0x1f0
[c000000efe47bb00d00000000daf0128 xhci_pci_remove+0x78/0xb0
[xhci_pci]
[c000000efe47bb30c00000000055cf70 pci_device_remove+0x70/0x110
[c000000efe47bb70c00000000061c6bc __device_release_driver+0xbc/0x190
[c000000efe47bba0c00000000061c7d0 device_release_driver+0x40/0x70
[c000000efe47bbd0c000000000619510 unbind_store+0x120/0x150
[c000000efe47bc20c0000000006183c4 drv_attr_store+0x64/0xa0
[c000000efe47bc60c00000000039f1d0 sysfs_kf_write+0x80/0xb0
[c000000efe47bca0c00000000039e14c kernfs_fop_write+0x18c/0x1f0
[c000000efe47bcf0c0000000002e962c __vfs_write+0x6c/0x190
[c000000efe47bd90c0000000002eab40 vfs_write+0xc0/0x200
[c000000efe47bde0c0000000002ec85c SyS_write+0x6c/0x110
[c000000efe47be30c000000000009260 system_call+0x38/0x108

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: joel@jms.id.au
Reviewed-by: Roger Quadros <rogerq@ti.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: musb: host: correct cppi dma channel for isoch transfer
Bin Liu [Tue, 31 May 2016 15:05:25 +0000 (10:05 -0500)]
usb: musb: host: correct cppi dma channel for isoch transfer

commit 04471eb8c3158c0ad9df4b24da845a63b2e8f23a upstream.

Incorrect cppi dma channel is referenced in musb_rx_dma_iso_cppi41(),
which causes kernel NULL pointer reference oops later when calling
cppi41_dma_channel_program().

Fixes: 069a3fd (usb: musb: Remove ifdefs for musb_host_rx in musb_host.c
part1)

Reported-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: musb: Ensure rx reinit occurs for shared_fifo endpoints
Andrew Goodbody [Tue, 31 May 2016 15:05:26 +0000 (10:05 -0500)]
usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 upstream.

shared_fifo endpoints would only get a previous tx state cleared
out, the rx state was only cleared for non shared_fifo endpoints
Change this so that the rx state is cleared for all endpoints.
This addresses an issue that resulted in rx packets being dropped
silently.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: musb: Stop bulk endpoint while queue is rotated
Andrew Goodbody [Tue, 31 May 2016 15:05:27 +0000 (10:05 -0500)]
usb: musb: Stop bulk endpoint while queue is rotated

commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream.

Ensure that the endpoint is stopped by clearing REQPKT before
clearing DATAERR_NAKTIMEOUT before rotating the queue on the
dedicated bulk endpoint.
This addresses an issue where a race could result in the endpoint
receiving data before it was reprogrammed resulting in a warning
about such data from musb_rx_reinit before it was thrown away.
The data thrown away was a valid packet that had been correctly
ACKed which meant the host and device got out of sync.

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: musb: only restore devctl when session was set in backup
Bin Liu [Tue, 31 May 2016 15:05:24 +0000 (10:05 -0500)]
usb: musb: only restore devctl when session was set in backup

commit 84ac5d1140f716a616522f952734e850448d2556 upstream.

If the session bit was not set in the backup of devctl register,
restoring devctl would clear the session bit. Therefor, only restore
devctl register when the session bit was set in the backup.

This solves the device enumeration failure in otg mode exposed by commit
56f487c (PM / Runtime: Update last_busy in rpm_resume).

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: quirks: Add no-lpm quirk for Acer C120 LED Projector
Hans de Goede [Thu, 19 May 2016 15:12:20 +0000 (17:12 +0200)]
usb: quirks: Add no-lpm quirk for Acer C120 LED Projector

commit 32cb0b37098f4beeff5ad9e325f11b42a6ede56c upstream.

The Acer C120 LED Projector is a USB-3 connected pico projector which
takes both its power and video data from USB-3.

In combination with some hubs this device does not play well with
lpm, so disable lpm for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: quirks: Fix sorting
Hans de Goede [Thu, 19 May 2016 15:12:19 +0000 (17:12 +0200)]
usb: quirks: Fix sorting

commit 81099f97bd31e25ff2719a435b1860fc3876122f upstream.

Properly sort all the entries by vendor id.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoUSB: uas: Fix slave queue_depth not being set
Hans de Goede [Tue, 31 May 2016 07:18:03 +0000 (09:18 +0200)]
USB: uas: Fix slave queue_depth not being set

commit 593224ea77b1ca842f45cf76f4deeef44dfbacd1 upstream.

Commit 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
removed the scsi_change_queue_depth() call from uas_slave_configure()
assuming that the slave would inherit the host's queue_depth, which
that commit sets to the same value.

This is incorrect, without the scsi_change_queue_depth() call the slave's
queue_depth defaults to 1, introducing a performance regression.

This commit restores the call, fixing the performance regression.

Fixes: 198de51dbc34 ("USB: uas: Limit qdepth at the scsi-host level")
Reported-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: user - re-add size check for CRYPTO_MSG_GETALG
Mathias Krause [Wed, 22 Jun 2016 18:29:37 +0000 (20:29 +0200)]
crypto: user - re-add size check for CRYPTO_MSG_GETALG

commit 055ddaace03580455a7b7dbea8e93d62acee61fc upstream.

Commit 9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG")
accidentally removed the minimum size check for CRYPTO_MSG_GETALG
netlink messages. This allows userland to send a truncated
CRYPTO_MSG_GETALG message as short as a netlink header only making
crypto_report() operate on uninitialized memory by accessing data
beyond the end of the netlink message.

Fix this be re-adding the minimum required size of CRYPTO_MSG_GETALG
messages to the crypto_msg_min[] array.

Fixes: 9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: ux500 - memmove the right size
Linus Walleij [Wed, 8 Jun 2016 12:56:39 +0000 (14:56 +0200)]
crypto: ux500 - memmove the right size

commit 19ced623db2fe91604d69f7d86b03144c5107739 upstream.

The hash buffer is really HASH_BLOCK_SIZE bytes, someone
must have thought that memmove takes n*u32 words by mistake.
Tests work as good/bad as before after this patch.

Cc: Joakim Bech <joakim.bech@linaro.org>
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: vmx - Increase priority of aes-cbc cipher
Anton Blanchard [Fri, 10 Jun 2016 06:47:03 +0000 (16:47 +1000)]
crypto: vmx - Increase priority of aes-cbc cipher

commit 12d3f49e1ffbbf8cbbb60acae5a21103c5c841ac upstream.

All of the VMX AES ciphers (AES, AES-CBC and AES-CTR) are set at
priority 1000. Unfortunately this means we never use AES-CBC and
AES-CTR, because the base AES-CBC cipher that is implemented on
top of AES inherits its priority.

To fix this, AES-CBC and AES-CTR have to be a higher priority. Set
them to 2000.

Testing on a POWER8 with:

cryptsetup benchmark --cipher aes --key-size 256

Shows decryption speed increase from 402.4 MB/s to 3069.2 MB/s,
over 7x faster. Thanks to Mike Strosaker for helping me debug
this issue.

Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoAX.25: Close socket connection on session completion
Basil Gunn [Thu, 16 Jun 2016 16:42:30 +0000 (09:42 -0700)]
AX.25: Close socket connection on session completion

[ Upstream commit 4a7d99ea1b27734558feb6833f180cd38a159940 ]

A socket connection made in ax.25 is not closed when session is
completed.  The heartbeat timer is stopped prematurely and this is
where the socket gets closed. Allow heatbeat timer to run to close
socket. Symptom occurs in kernels >= 4.2.0

Originally sent 6/15/2016. Resend with distribution list matching
scripts/maintainer.pl output.

Signed-off-by: Basil Gunn <basil@pacabunga.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agobpf: try harder on clones when writing into skb
Daniel Borkmann [Fri, 19 Feb 2016 22:05:25 +0000 (23:05 +0100)]
bpf: try harder on clones when writing into skb

[ Upstream commit 3697649ff29e0f647565eed04b27a7779c646a22 ]

When we're dealing with clones and the area is not writeable, try
harder and get a copy via pskb_expand_head(). Replace also other
occurences in tc actions with the new skb_try_make_writable().

Reported-by: Ashhad Sheikh <ashhadsheikh394@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet: alx: Work around the DMA RX overflow issue
Feng Tang [Fri, 24 Jun 2016 07:26:05 +0000 (15:26 +0800)]
net: alx: Work around the DMA RX overflow issue

[ Upstream commit 881d0327db37ad917a367c77aff1afa1ee41e0a9 ]

Note: This is a verified backported patch for stable 4.4 kernel, and it
could also be applied to 4.3/4.2/4.1/3.18/3.16

There is a problem with alx devices, that the network link will be
lost in 1-5 minutes after the device is up.

>From debugging without datasheet, we found the error always
happen when the DMA RX address is set to 0x....fc0, which is very
likely to be a HW/silicon problem.

This patch will apply rx skb with 64 bytes longer space, and if the
allocated skb has a 0x...fc0 address, it will use skb_resever(skb, 64)
to advance the address, so that the RX overflow can be avoided.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Tested-by: Ole Lukoie <olelukoie@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet: macb: fix default configuration for GMAC on AT91
Nicolas Ferre [Thu, 10 Mar 2016 15:44:32 +0000 (16:44 +0100)]
net: macb: fix default configuration for GMAC on AT91

[ Upstream commit 6bdaa5e9ed39b3b3328f35d218e8ad5a99cfc4d2 ]

On AT91 SoCs, the User Register (USRIO) exposes a switch to configure the
"Reduced" or "Traditional" version of the Media Independent Interface
(RMII vs. MII or RGMII vs. GMII).
As on the older EMAC version, on GMAC, this switch is set by default to the
non-reduced type of interface, so use the existing capability and extend it to
GMII as well. We then keep the current logic in the macb_init() function.

The capabilities of sama5d2, sama5d4 and sama5d3 GEM interface are updated in
the macb_config structure to be able to properly enable them with a traditional
interface (GMII or MII).

Reported-by: Romain HENRIET <romain.henriet@l-acoustics.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[cyrille.pitchen@atmel.com: backported to 4.4.y]
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoneigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()
David Barroso [Tue, 28 Jun 2016 08:16:43 +0000 (11:16 +0300)]
neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()

[ Upstream commit b560f03ddfb072bca65e9440ff0dc4f9b1d1f056 ]

neigh_xmit() expects to be called inside an RCU-bh read side critical
section, and while one of its two current callers gets this right, the
other one doesn't.

More specifically, neigh_xmit() has two callers, mpls_forward() and
mpls_output(), and while both callers call neigh_xmit() under
rcu_read_lock(), this provides sufficient protection for neigh_xmit()
only in the case of mpls_forward(), as that is always called from
softirq context and therefore doesn't need explicit BH protection,
while mpls_output() can be called from process context with softirqs
enabled.

When mpls_output() is called from process context, with softirqs
enabled, we can be preempted by a softirq at any time, and RCU-bh
considers the completion of a softirq as signaling the end of any
pending read-side critical sections, so if we do get a softirq
while we are in the part of neigh_xmit() that expects to be run inside
an RCU-bh read side critical section, we can end up with an unexpected
RCU grace period running right in the middle of that critical section,
making things go boom.

This patch fixes this impedance mismatch in the callee, by making
neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that
expects to be treated as an RCU-bh read side critical section, as this
seems a safer option than fixing it in the callers.

Fixes: 4fd3d7d9e868f ("neigh: Add helper function neigh_xmit")
Signed-off-by: David Barroso <dbarroso@fastly.com>
Signed-off-by: Lennert Buytenhek <lbuytenhek@fastly.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agobpf, perf: delay release of BPF prog after grace period
Daniel Borkmann [Mon, 27 Jun 2016 19:38:11 +0000 (21:38 +0200)]
bpf, perf: delay release of BPF prog after grace period

[ Upstream commit ceb56070359b7329b5678b5d95a376fcb24767be ]

Commit dead9f29ddcc ("perf: Fix race in BPF program unregister") moved
destruction of BPF program from free_event_rcu() callback to __free_event(),
which is problematic if used with tail calls: if prog A is attached as
trace event directly, but at the same time present in a tail call map used
by another trace event program elsewhere, then we need to delay destruction
via RCU grace period since it can still be in use by the program doing the
tail call (the prog first needs to be dropped from the tail call map, then
trace event with prog A attached destroyed, so we get immediate destruction).

Fixes: dead9f29ddcc ("perf: Fix race in BPF program unregister")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jann Horn <jann@thejh.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosock_diag: do not broadcast raw socket destruction
Willem de Bruijn [Fri, 24 Jun 2016 20:02:35 +0000 (16:02 -0400)]
sock_diag: do not broadcast raw socket destruction

[ Upstream commit 9a0fee2b552b1235fb1706ae1fc664ae74573be8 ]

Diag intends to broadcast tcp_sk and udp_sk socket destruction.
Testing sk->sk_protocol for IPPROTO_TCP/IPPROTO_UDP alone is not
sufficient for this. Raw sockets can have the same type.

Add a test for sk->sk_type.

Fixes: eb4cb008529c ("sock_diag: define destruction multicast groups")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoBridge: Fix ipv6 mc snooping if bridge has no ipv6 address
daniel [Fri, 24 Jun 2016 10:35:18 +0000 (12:35 +0200)]
Bridge: Fix ipv6 mc snooping if bridge has no ipv6 address

[ Upstream commit 0888d5f3c0f183ea6177355752ada433d370ac89 ]

The bridge is falsly dropping ipv6 mulitcast packets if there is:
 1. No ipv6 address assigned on the brigde.
 2. No external mld querier present.
 3. The internal querier enabled.

When the bridge fails to build mld queries, because it has no
ipv6 address, it slilently returns, but keeps the local querier enabled.
This specific case causes confusing packet loss.

Ipv6 multicast snooping can only work if:
 a) An external querier is present
 OR
 b) The bridge has an ipv6 address an is capable of sending own queries

Otherwise it has to forward/flood the ipv6 multicast traffic,
because snooping cannot work.

This patch fixes the issue by adding a flag to the bridge struct that
indicates that there is currently no ipv6 address assinged to the bridge
and returns a false state for the local querier in
__br_multicast_querier_exists().

Special thanks to Linus Lüssing.

Fixes: d1d81d4c3dd8 ("bridge: check return value of ipv6_dev_get_saddr()")
Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoipmr/ip6mr: Initialize the last assert time of mfc entries.
Tom Goff [Thu, 23 Jun 2016 20:11:57 +0000 (16:11 -0400)]
ipmr/ip6mr: Initialize the last assert time of mfc entries.

[ Upstream commit 70a0dec45174c976c64b4c8c1d0898581f759948 ]

This fixes wrong-interface signaling on 32-bit platforms for entries
created when jiffies > 2^31 + MFC_ASSERT_THRESH.

Signed-off-by: Tom Goff <thomas.goff@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetem: fix a use after free
Eric Dumazet [Mon, 20 Jun 2016 22:00:43 +0000 (15:00 -0700)]
netem: fix a use after free

[ Upstream commit 21de12ee5568fd1aec47890c72967abf791ac80a ]

If the packet was dropped by lower qdisc, then we must not
access it later.

Save qdisc_pkt_len(skb) in a temp variable.

Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoesp: Fix ESN generation under UDP encapsulation
Herbert Xu [Sat, 18 Jun 2016 05:03:36 +0000 (13:03 +0800)]
esp: Fix ESN generation under UDP encapsulation

[ Upstream commit 962fcef33b03395051367181a0549d29d109d9a4 ]

Blair Steven noticed that ESN in conjunction with UDP encapsulation
is broken because we set the temporary ESP header to the wrong spot.

This patch fixes this by first of all using the right spot, i.e.,
4 bytes off the real ESP header, and then saving this information
so that after encryption we can restore it properly.

Fixes: 7021b2e1cddd ("esp4: Switch to new AEAD interface")
Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosit: correct IP protocol used in ipip6_err
Simon Horman [Thu, 16 Jun 2016 08:06:19 +0000 (17:06 +0900)]
sit: correct IP protocol used in ipip6_err

[ Upstream commit d5d8760b78d0cfafe292f965f599988138b06a70 ]

Since 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
ipip6_err() may be called for packets whose IP protocol is
IPPROTO_IPIP as well as those whose IP protocol is IPPROTO_IPV6.

In the case of IPPROTO_IPIP packets the correct protocol value is not
passed to ipv4_update_pmtu() or ipv4_redirect().

This patch resolves this problem by using the IP protocol of the packet
rather than a hard-coded value. This appears to be consistent
with the usage of the protocol of a packet by icmp_socket_deliver()
the caller of ipip6_err().

I was able to exercise the redirect case by using a setup where an ICMP
redirect was received for the destination of the encapsulated packet.
However, it appears that although incorrect the protocol field is not used
in this case and thus no problem manifests.  On inspection it does not
appear that a problem will manifest in the fragmentation needed/update pmtu
case either.

In short I believe this is a cosmetic fix. None the less, the use of
IPPROTO_IPV6 seems wrong and confusing.

Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG
Jason A. Donenfeld [Wed, 15 Jun 2016 09:14:53 +0000 (11:14 +0200)]
net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG

[ Upstream commit daddef76c3deaaa7922f9d7b18edbf0a061215c3 ]

The implementation of net_dbg_ratelimited in the CONFIG_DYNAMIC_DEBUG
case was added with 2c94b5373 ("net: Implement net_dbg_ratelimited() for
CONFIG_DYNAMIC_DEBUG case"). The implementation strategy was to take the
usual definition of the dynamic_pr_debug macro, but alter it by adding a
call to "net_ratelimit()" in the if statement. This is, in fact, the
correct approach.

However, while doing this, the author of the commit forgot to surround
fmt by pr_fmt, resulting in unprefixed log messages appearing in the
console. So, this commit adds back the pr_fmt(fmt) invocation, making
net_dbg_ratelimited properly consistent across DEBUG, no DEBUG, and
DYNAMIC_DEBUG cases, and bringing parity with the behavior of
dynamic_pr_debug as well.

Fixes: 2c94b5373 ("net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Tim Bingham <tbingham@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonet_sched: fix pfifo_head_drop behavior vs backlog
Eric Dumazet [Mon, 13 Jun 2016 03:01:25 +0000 (20:01 -0700)]
net_sched: fix pfifo_head_drop behavior vs backlog

[ Upstream commit 6c0d54f1897d229748d4f41ef919078db6db2123 ]

When the qdisc is full, we drop a packet at the head of the queue,
queue the current skb and return NET_XMIT_CN

Now we track backlog on upper qdiscs, we need to call
qdisc_tree_reduce_backlog(), even if the qlen did not change.

Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoclk: imx6q: fix typo in CAN clock definition v4.4.14-KARO
Lothar Waßmann [Wed, 30 Mar 2016 12:23:03 +0000 (14:23 +0200)]
clk: imx6q: fix typo in CAN clock definition

commit ee36027427c7 ("clk: imx: Add clock support for imx6qp")
introduced a regression due to a subtle typo in the 'can_root' clock
definition. The effect is that trying to configure the bitrate of the
can interfaces fails with -EDOM or produces a division by zero error
due to the clock_freq of the can serial clock being reported as '0'.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Fixes: ee36027427c7 ("clk: imx: Add clock support for imx6qp")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoMerge branch 'karo-tx6-mainline' into stable
Lothar Waßmann [Tue, 5 Jul 2016 14:05:22 +0000 (16:05 +0200)]
Merge branch 'karo-tx6-mainline' into stable

3 years agoLinux 4.4.14
Greg Kroah-Hartman [Fri, 24 Jun 2016 17:18:38 +0000 (10:18 -0700)]
Linux 4.4.14

3 years agonetfilter: x_tables: introduce and use xt_copy_counters_from_user
Florian Westphal [Fri, 1 Apr 2016 13:37:59 +0000 (15:37 +0200)]
netfilter: x_tables: introduce and use xt_copy_counters_from_user

commit d7591f0c41ce3e67600a982bab6989ef0f07b3ce upstream.

The three variants use same copy&pasted code, condense this into a
helper and use that.

Make sure info.name is 0-terminated.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: do compat validation via translate_table
Florian Westphal [Fri, 1 Apr 2016 12:17:34 +0000 (14:17 +0200)]
netfilter: x_tables: do compat validation via translate_table

commit 09d9686047dbbe1cf4faa558d3ecc4aae2046054 upstream.

This looks like refactoring, but its also a bug fix.

Problem is that the compat path (32bit iptables, 64bit kernel) lacks a few
sanity tests that are done in the normal path.

For example, we do not check for underflows and the base chain policies.

While its possible to also add such checks to the compat path, its more
copy&pastry, for instance we cannot reuse check_underflow() helper as
e->target_offset differs in the compat case.

Other problem is that it makes auditing for validation errors harder; two
places need to be checked and kept in sync.

At a high level 32 bit compat works like this:
1- initial pass over blob:
   validate match/entry offsets, bounds checking
   lookup all matches and targets
   do bookkeeping wrt. size delta of 32/64bit structures
   assign match/target.u.kernel pointer (points at kernel
   implementation, needed to access ->compatsize etc.)

2- allocate memory according to the total bookkeeping size to
   contain the translated ruleset

3- second pass over original blob:
   for each entry, copy the 32bit representation to the newly allocated
   memory.  This also does any special match translations (e.g.
   adjust 32bit to 64bit longs, etc).

4- check if ruleset is free of loops (chase all jumps)

5-first pass over translated blob:
   call the checkentry function of all matches and targets.

The alternative implemented by this patch is to drop steps 3&4 from the
compat process, the translation is changed into an intermediate step
rather than a full 1:1 translate_table replacement.

In the 2nd pass (step #3), change the 64bit ruleset back to a kernel
representation, i.e. put() the kernel pointer and restore ->u.user.name .

This gets us a 64bit ruleset that is in the format generated by a 64bit
iptables userspace -- we can then use translate_table() to get the
'native' sanity checks.

This has two drawbacks:

1. we re-validate all the match and target entry structure sizes even
though compat translation is supposed to never generate bogus offsets.
2. we put and then re-lookup each match and target.

THe upside is that we get all sanity tests and ruleset validations
provided by the normal path and can remove some duplicated compat code.

iptables-restore time of autogenerated ruleset with 300k chains of form
-A CHAIN0001 -m limit --limit 1/s -j CHAIN0002
-A CHAIN0002 -m limit --limit 1/s -j CHAIN0003

shows no noticeable differences in restore times:
old:   0m30.796s
new:   0m31.521s
64bit: 0m25.674s

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: xt_compat_match_from_user doesn't need a retval
Florian Westphal [Fri, 1 Apr 2016 12:17:33 +0000 (14:17 +0200)]
netfilter: x_tables: xt_compat_match_from_user doesn't need a retval

commit 0188346f21e6546498c2a0f84888797ad4063fc5 upstream.

Always returned 0.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: ip6_tables: simplify translate_compat_table args
Florian Westphal [Fri, 1 Apr 2016 12:17:31 +0000 (14:17 +0200)]
netfilter: ip6_tables: simplify translate_compat_table args

commit 329a0807124f12fe1c8032f95d8a8eb47047fb0e upstream.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: ip_tables: simplify translate_compat_table args
Florian Westphal [Fri, 1 Apr 2016 12:17:30 +0000 (14:17 +0200)]
netfilter: ip_tables: simplify translate_compat_table args

commit 7d3f843eed29222254c9feab481f55175a1afcc9 upstream.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: arp_tables: simplify translate_compat_table args
Florian Westphal [Fri, 1 Apr 2016 12:17:32 +0000 (14:17 +0200)]
netfilter: arp_tables: simplify translate_compat_table args

commit 8dddd32756f6fe8e4e82a63361119b7e2384e02f upstream.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: don't reject valid target size on some architectures
Florian Westphal [Wed, 1 Jun 2016 00:04:44 +0000 (02:04 +0200)]
netfilter: x_tables: don't reject valid target size on some architectures

commit 7b7eba0f3515fca3296b8881d583f7c1042f5226 upstream.

Quoting John Stultz:
  In updating a 32bit arm device from 4.6 to Linus' current HEAD, I
  noticed I was having some trouble with networking, and realized that
  /proc/net/ip_tables_names was suddenly empty.
  Digging through the registration process, it seems we're catching on the:

   if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 &&
       target_offset + sizeof(struct xt_standard_target) != next_offset)
         return -EINVAL;

  Where next_offset seems to be 4 bytes larger then the
  offset + standard_target struct size.

next_offset needs to be aligned via XT_ALIGN (so we can access all members
of ip(6)t_entry struct).

This problem didn't show up on i686 as it only needs 4-byte alignment for
u64, but iptables userspace on other 32bit arches does insert extra padding.

Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Fixes: 7ed2abddd20cf ("netfilter: x_tables: check standard target size too")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: validate all offsets and sizes in a rule
Florian Westphal [Fri, 1 Apr 2016 12:17:29 +0000 (14:17 +0200)]
netfilter: x_tables: validate all offsets and sizes in a rule

commit 13631bfc604161a9d69cd68991dff8603edd66f9 upstream.

Validate that all matches (if any) add up to the beginning of
the target and that each match covers at least the base structure size.

The compat path should be able to safely re-use the function
as the structures only differ in alignment; added a
BUILD_BUG_ON just in case we have an arch that adds padding as well.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: check for bogus target offset
Florian Westphal [Fri, 1 Apr 2016 12:17:28 +0000 (14:17 +0200)]
netfilter: x_tables: check for bogus target offset

commit ce683e5f9d045e5d67d1312a42b359cb2ab2a13c upstream.

We're currently asserting that targetoff + targetsize <= nextoff.

Extend it to also check that targetoff is >= sizeof(xt_entry).
Since this is generic code, add an argument pointing to the start of the
match/target, we can then derive the base structure size from the delta.

We also need the e->elems pointer in a followup change to validate matches.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: check standard target size too
Florian Westphal [Fri, 1 Apr 2016 12:17:27 +0000 (14:17 +0200)]
netfilter: x_tables: check standard target size too

commit 7ed2abddd20cf8f6bd27f65bd218f26fa5bf7f44 upstream.

We have targets and standard targets -- the latter carries a verdict.

The ip/ip6tables validation functions will access t->verdict for the
standard targets to fetch the jump offset or verdict for chainloop
detection, but this happens before the targets get checked/validated.

Thus we also need to check for verdict presence here, else t->verdict
can point right after a blob.

Spotted with UBSAN while testing malformed blobs.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: add compat version of xt_check_entry_offsets
Florian Westphal [Fri, 1 Apr 2016 12:17:26 +0000 (14:17 +0200)]
netfilter: x_tables: add compat version of xt_check_entry_offsets

commit fc1221b3a163d1386d1052184202d5dc50d302d1 upstream.

32bit rulesets have different layout and alignment requirements, so once
more integrity checks get added to xt_check_entry_offsets it will reject
well-formed 32bit rulesets.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: assert minimum target size
Florian Westphal [Fri, 1 Apr 2016 12:17:25 +0000 (14:17 +0200)]
netfilter: x_tables: assert minimum target size

commit a08e4e190b866579896c09af59b3bdca821da2cd upstream.

The target size includes the size of the xt_entry_target struct.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: kill check_entry helper
Florian Westphal [Fri, 1 Apr 2016 12:17:24 +0000 (14:17 +0200)]
netfilter: x_tables: kill check_entry helper

commit aa412ba225dd3bc36d404c28cdc3d674850d80d0 upstream.

Once we add more sanity testing to xt_check_entry_offsets it
becomes relvant if we're expecting a 32bit 'config_compat' blob
or a normal one.

Since we already have a lot of similar-named functions (check_entry,
compat_check_entry, find_and_check_entry, etc.) and the current
incarnation is short just fold its contents into the callers.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: add and use xt_check_entry_offsets
Florian Westphal [Fri, 1 Apr 2016 12:17:23 +0000 (14:17 +0200)]
netfilter: x_tables: add and use xt_check_entry_offsets

commit 7d35812c3214afa5b37a675113555259cfd67b98 upstream.

Currently arp/ip and ip6tables each implement a short helper to check that
the target offset is large enough to hold one xt_entry_target struct and
that t->u.target_size fits within the current rule.

Unfortunately these checks are not sufficient.

To avoid adding new tests to all of ip/ip6/arptables move the current
checks into a helper, then extend this helper in followup patches.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: validate targets of jumps
Florian Westphal [Fri, 1 Apr 2016 12:17:22 +0000 (14:17 +0200)]
netfilter: x_tables: validate targets of jumps

commit 36472341017529e2b12573093cc0f68719300997 upstream.

When we see a jump also check that the offset gets us to beginning of
a rule (an ipt_entry).

The extra overhead is negible, even with absurd cases.

300k custom rules, 300k jumps to 'next' user chain:
[ plus one jump from INPUT to first userchain ]:

Before:
real    0m24.874s
user    0m7.532s
sys     0m16.076s

After:
real    0m27.464s
user    0m7.436s
sys     0m18.840s

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: don't move to non-existent next rule
Florian Westphal [Fri, 1 Apr 2016 12:17:21 +0000 (14:17 +0200)]
netfilter: x_tables: don't move to non-existent next rule

commit f24e230d257af1ad7476c6e81a8dc3127a74204e upstream.

Ben Hawkes says:

 In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it
 is possible for a user-supplied ipt_entry structure to have a large
 next_offset field. This field is not bounds checked prior to writing a
 counter value at the supplied offset.

Base chains enforce absolute verdict.

User defined chains are supposed to end with an unconditional return,
xtables userspace adds them automatically.

But if such return is missing we will move to non-existent next rule.

Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agodrm/core: Do not preserve framebuffer on rmfb, v4.
Maarten Lankhorst [Wed, 4 May 2016 12:38:26 +0000 (14:38 +0200)]
drm/core: Do not preserve framebuffer on rmfb, v4.

commit f2d580b9a8149735cbc4b59c4a8df60173658140 upstream.

It turns out that preserving framebuffers after the rmfb call breaks
vmwgfx userspace. This was originally introduced because it was thought
nobody relied on the behavior, but unfortunately it seems there are
exceptions.

drm_framebuffer_remove may fail with -EINTR now, so a straight revert
is impossible. There is no way to remove the framebuffer from the lists
and active planes without introducing a race because of the different
locking requirements. Instead call drm_framebuffer_remove from a
workqueue, which is unaffected by signals.

Changes since v1:
- Add comment.
Changes since v2:
- Add fastpath for refcount = 1. (danvet)
Changes since v3:
- Rebased.
- Restore lastclose framebuffer removal too.

Fixes: 13803132818c ("drm/core: Preserve the framebuffer after removing it.")
Testcase: kms_rmfb_basic
References: https://lists.freedesktop.org/archives/dri-devel/2016-March/102876.html
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com> #v3
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6c63ca37-0e7e-ac7f-a6d2-c7822e3d611f@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
Tadeusz Struk [Fri, 29 Apr 2016 17:43:40 +0000 (10:43 -0700)]
crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq

commit 6dc5df71ee5c8b44607928bfe27be50314dcf848 upstream.

Fix undefined reference issue reported by kbuild test robot.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: fix unconditional helper
Florian Westphal [Tue, 22 Mar 2016 17:02:52 +0000 (18:02 +0100)]
netfilter: x_tables: fix unconditional helper

commit 54d83fc74aa9ec72794373cb47432c5f7fb1a309 upstream.

Ben Hawkes says:

 In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it
 is possible for a user-supplied ipt_entry structure to have a large
 next_offset field. This field is not bounds checked prior to writing a
 counter value at the supplied offset.

Problem is that mark_source_chains should not have been called --
the rule doesn't have a next entry, so its supposed to return
an absolute verdict of either ACCEPT or DROP.

However, the function conditional() doesn't work as the name implies.
It only checks that the rule is using wildcard address matching.

However, an unconditional rule must also not be using any matches
(no -m args).

The underflow validator only checked the addresses, therefore
passing the 'unconditional absolute verdict' test, while
mark_source_chains also tested for presence of matches, and thus
proceeeded to the next (not-existent) rule.

Unify this so that all the callers have same idea of 'unconditional rule'.

Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: make sure e->next_offset covers remaining blob size
Florian Westphal [Tue, 22 Mar 2016 17:02:50 +0000 (18:02 +0100)]
netfilter: x_tables: make sure e->next_offset covers remaining blob size

commit 6e94e0cfb0887e4013b3b930fa6ab1fe6bb6ba91 upstream.

Otherwise this function may read data beyond the ruleset blob.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agonetfilter: x_tables: validate e->target_offset early
Florian Westphal [Tue, 22 Mar 2016 17:02:49 +0000 (18:02 +0100)]
netfilter: x_tables: validate e->target_offset early

commit bdf533de6968e9686df777dc178486f600c6e617 upstream.

We should check that e->target_offset is sane before
mark_source_chains gets called since it will fetch the target entry
for loop detection.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoMIPS: Fix 64k page support for 32 bit kernels.
Ralf Baechle [Thu, 4 Feb 2016 00:24:40 +0000 (01:24 +0100)]
MIPS: Fix 64k page support for 32 bit kernels.

commit d7de413475f443957a0c1d256e405d19b3a2cb22 upstream.

TASK_SIZE was defined as 0x7fff8000UL which for 64k pages is not a
multiple of the page size.  Somewhere further down the math fails
such that executing an ELF binary fails.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Fix return from trap window fill crashes.
David S. Miller [Sun, 29 May 2016 03:41:12 +0000 (20:41 -0700)]
sparc64: Fix return from trap window fill crashes.

[ Upstream commit 7cafc0b8bf130f038b0ec2dcdd6a9de6dc59b65a ]

We must handle data access exception as well as memory address unaligned
exceptions from return from trap window fill faults, not just normal
TLB misses.

Otherwise we can get an OOPS that looks like this:

ld-linux.so.2(36808): Kernel bad sw trap 5 [#1]
CPU: 1 PID: 36808 Comm: ld-linux.so.2 Not tainted 4.6.0 #34
task: fff8000303be5c60 ti: fff8000301344000 task.ti: fff8000301344000
TSTATE: 0000004410001601 TPC: 0000000000a1a784 TNPC: 0000000000a1a788 Y: 00000002    Not tainted
TPC: <do_sparc64_fault+0x5c4/0x700>
g0: fff8000024fc8248 g1: 0000000000db04dc g2: 0000000000000000 g3: 0000000000000001
g4: fff8000303be5c60 g5: fff800030e672000 g6: fff8000301344000 g7: 0000000000000001
o0: 0000000000b95ee8 o1: 000000000000012b o2: 0000000000000000 o3: 0000000200b9b358
o4: 0000000000000000 o5: fff8000301344040 sp: fff80003013475c1 ret_pc: 0000000000a1a77c
RPC: <do_sparc64_fault+0x5bc/0x700>
l0: 00000000000007ff l1: 0000000000000000 l2: 000000000000005f l3: 0000000000000000
l4: fff8000301347e98 l5: fff8000024ff3060 l6: 0000000000000000 l7: 0000000000000000
i0: fff8000301347f60 i1: 0000000000102400 i2: 0000000000000000 i3: 0000000000000000
i4: 0000000000000000 i5: 0000000000000000 i6: fff80003013476a1 i7: 0000000000404d4c
I7: <user_rtt_fill_fixup+0x6c/0x7c>
Call Trace:
 [0000000000404d4c] user_rtt_fill_fixup+0x6c/0x7c

The window trap handlers are slightly clever, the trap table entries for them are
composed of two pieces of code.  First comes the code that actually performs
the window fill or spill trap handling, and then there are three instructions at
the end which are for exception processing.

The userland register window fill handler is:

add %sp, STACK_BIAS + 0x00, %g1; \
ldxa [%g1 + %g0] ASI, %l0; \
mov 0x08, %g2; \
mov 0x10, %g3; \
ldxa [%g1 + %g2] ASI, %l1; \
mov 0x18, %g5; \
ldxa [%g1 + %g3] ASI, %l2; \
ldxa [%g1 + %g5] ASI, %l3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %l4; \
ldxa [%g1 + %g2] ASI, %l5; \
ldxa [%g1 + %g3] ASI, %l6; \
ldxa [%g1 + %g5] ASI, %l7; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i0; \
ldxa [%g1 + %g2] ASI, %i1; \
ldxa [%g1 + %g3] ASI, %i2; \
ldxa [%g1 + %g5] ASI, %i3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i4; \
ldxa [%g1 + %g2] ASI, %i5; \
ldxa [%g1 + %g3] ASI, %i6; \
ldxa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;

And the way this works is that if any of those memory accesses
generate an exception, the exception handler can revector to one of
those final three branch instructions depending upon which kind of
exception the memory access took.  In this way, the fault handler
doesn't have to know if it was a spill or a fill that it's handling
the fault for.  It just always branches to the last instruction in
the parent trap's handler.

For example, for a regular fault, the code goes:

winfix_trampoline:
rdpr %tpc, %g3
or %g3, 0x7c, %g3
wrpr %g3, %tnpc
done

All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the
trap time program counter, we'll get that final instruction in the
trap handler.

On return from trap, we have to pull the register window in but we do
this by hand instead of just executing a "restore" instruction for
several reasons.  The largest being that from Niagara and onward we
simply don't have enough levels in the trap stack to fully resolve all
possible exception cases of a window fault when we are already at
trap level 1 (which we enter to get ready to return from the original
trap).

This is executed inline via the FILL_*_RTRAP handlers.  rtrap_64.S's
code branches directly to these to do the window fill by hand if
necessary.  Now if you look at them, we'll see at the end:

    ba,a,pt    %xcc, user_rtt_fill_fixup;
    ba,a,pt    %xcc, user_rtt_fill_fixup;
    ba,a,pt    %xcc, user_rtt_fill_fixup;

And oops, all three cases are handled like a fault.

This doesn't work because each of these trap types (data access
exception, memory address unaligned, and faults) store their auxiliary
info in different registers to pass on to the C handler which does the
real work.

So in the case where the stack was unaligned, the unaligned trap
handler sets up the arg registers one way, and then we branched to
the fault handler which expects them setup another way.

So the FAULT_TYPE_* value ends up basically being garbage, and
randomly would generate the backtrace seen above.

Reported-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc: Harden signal return frame checks.
David S. Miller [Sun, 29 May 2016 04:21:31 +0000 (21:21 -0700)]
sparc: Harden signal return frame checks.

[ Upstream commit d11c2a0de2824395656cf8ed15811580c9dd38aa ]

All signal frames must be at least 16-byte aligned, because that is
the alignment we explicitly create when we build signal return stack
frames.

All stack pointers must be at least 8-byte aligned.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Take ctx_alloc_lock properly in hugetlb_setup().
David S. Miller [Wed, 25 May 2016 19:51:20 +0000 (12:51 -0700)]
sparc64: Take ctx_alloc_lock properly in hugetlb_setup().

[ Upstream commit 9ea46abe22550e3366ff7cee2f8391b35b12f730 ]

On cheetahplus chips we take the ctx_alloc_lock in order to
modify the TLB lookup parameters for the indexed TLBs, which
are stored in the context register.

This is called with interrupts disabled, however ctx_alloc_lock
is an IRQ safe lock, therefore we must take acquire/release it
properly with spin_{lock,unlock}_irq().

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Reduce TLB flushes during hugepte changes
Nitin Gupta [Wed, 30 Mar 2016 18:17:13 +0000 (11:17 -0700)]
sparc64: Reduce TLB flushes during hugepte changes

[ Upstream commit 24e49ee3d76b70853a96520e46b8837e5eae65b2 ]

During hugepage map/unmap, TSB and TLB flushes are currently
issued at every PAGE_SIZE'd boundary which is unnecessary.
We now issue the flush at REAL_HPAGE_SIZE boundaries only.

Without this patch workloads which unmap a large hugepage
backed VMA region get CPU lockups due to excessive TLB
flush calls.

Orabug: 223655392264323022995196

Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc/PCI: Fix for panic while enabling SR-IOV
Babu Moger [Thu, 24 Mar 2016 20:02:22 +0000 (13:02 -0700)]
sparc/PCI: Fix for panic while enabling SR-IOV

[ Upstream commit d0c31e02005764dae0aab130a57e9794d06b824d ]

We noticed this panic while enabling SR-IOV in sparc.

mlx4_core: Mellanox ConnectX core driver v2.2-1 (Jan  1 2015)
mlx4_core: Initializing 0007:01:00.0
mlx4_core 0007:01:00.0: Enabling SR-IOV with 5 VFs
mlx4_core: Initializing 0007:01:00.1
Unable to handle kernel NULL pointer dereference
insmod(10010): Oops [#1]
CPU: 391 PID: 10010 Comm: insmod Not tainted
4.1.12-32.el6uek.kdump2.sparc64 #1
TPC: <dma_supported+0x20/0x80>
I7: <__mlx4_init_one+0x324/0x500 [mlx4_core]>
Call Trace:
 [00000000104c5ea4] __mlx4_init_one+0x324/0x500 [mlx4_core]
 [00000000104c613c] mlx4_init_one+0xbc/0x120 [mlx4_core]
 [0000000000725f14] local_pci_probe+0x34/0xa0
 [0000000000726028] pci_call_probe+0xa8/0xe0
 [0000000000726310] pci_device_probe+0x50/0x80
 [000000000079f700] really_probe+0x140/0x420
 [000000000079fa24] driver_probe_device+0x44/0xa0
 [000000000079fb5c] __device_attach+0x3c/0x60
 [000000000079d85c] bus_for_each_drv+0x5c/0xa0
 [000000000079f588] device_attach+0x88/0xc0
 [000000000071acd0] pci_bus_add_device+0x30/0x80
 [0000000000736090] virtfn_add.clone.1+0x210/0x360
 [00000000007364a4] sriov_enable+0x2c4/0x520
 [000000000073672c] pci_enable_sriov+0x2c/0x40
 [00000000104c2d58] mlx4_enable_sriov+0xf8/0x180 [mlx4_core]
 [00000000104c49ac] mlx4_load_one+0x42c/0xd40 [mlx4_core]
Disabling lock debugging due to kernel taint
Caller[00000000104c5ea4]: __mlx4_init_one+0x324/0x500 [mlx4_core]
Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core]
Caller[0000000000725f14]: local_pci_probe+0x34/0xa0
Caller[0000000000726028]: pci_call_probe+0xa8/0xe0
Caller[0000000000726310]: pci_device_probe+0x50/0x80
Caller[000000000079f700]: really_probe+0x140/0x420
Caller[000000000079fa24]: driver_probe_device+0x44/0xa0
Caller[000000000079fb5c]: __device_attach+0x3c/0x60
Caller[000000000079d85c]: bus_for_each_drv+0x5c/0xa0
Caller[000000000079f588]: device_attach+0x88/0xc0
Caller[000000000071acd0]: pci_bus_add_device+0x30/0x80
Caller[0000000000736090]: virtfn_add.clone.1+0x210/0x360
Caller[00000000007364a4]: sriov_enable+0x2c4/0x520
Caller[000000000073672c]: pci_enable_sriov+0x2c/0x40
Caller[00000000104c2d58]: mlx4_enable_sriov+0xf8/0x180 [mlx4_core]
Caller[00000000104c49ac]: mlx4_load_one+0x42c/0xd40 [mlx4_core]
Caller[00000000104c5f90]: __mlx4_init_one+0x410/0x500 [mlx4_core]
Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core]
Caller[0000000000725f14]: local_pci_probe+0x34/0xa0
Caller[0000000000726028]: pci_call_probe+0xa8/0xe0
Caller[0000000000726310]: pci_device_probe+0x50/0x80
Caller[000000000079f700]: really_probe+0x140/0x420
Caller[000000000079fa24]: driver_probe_device+0x44/0xa0
Caller[000000000079fb08]: __driver_attach+0x88/0xa0
Caller[000000000079d90c]: bus_for_each_dev+0x6c/0xa0
Caller[000000000079f29c]: driver_attach+0x1c/0x40
Caller[000000000079e35c]: bus_add_driver+0x17c/0x220
Caller[00000000007a02d4]: driver_register+0x74/0x120
Caller[00000000007263fc]: __pci_register_driver+0x3c/0x60
Caller[00000000104f62bc]: mlx4_init+0x60/0xcc [mlx4_core]
Kernel panic - not syncing: Fatal exception
Press Stop-A (L1-A) to return to the boot prom
---[ end Kernel panic - not syncing: Fatal exception

Details:
Here is the call sequence
virtfn_add->__mlx4_init_one->dma_set_mask->dma_supported

The panic happened at line 760(file arch/sparc/kernel/iommu.c)

758 int dma_supported(struct device *dev, u64 device_mask)
759 {
760         struct iommu *iommu = dev->archdata.iommu;
761         u64 dma_addr_mask = iommu->dma_addr_mask;
762
763         if (device_mask >= (1UL << 32UL))
764                 return 0;
765
766         if ((device_mask & dma_addr_mask) == dma_addr_mask)
767                 return 1;
768
769 #ifdef CONFIG_PCI
770         if (dev_is_pci(dev))
771 return pci64_dma_supported(to_pci_dev(dev), device_mask);
772 #endif
773
774         return 0;
775 }
776 EXPORT_SYMBOL(dma_supported);

Same panic happened with Intel ixgbe driver also.

SR-IOV code looks for arch specific data while enabling
VFs. When VF device is added, driver probe function makes set
of calls to initialize the pci device. Because the VF device is
added different way than the normal PF device(which happens via
of_create_pci_dev for sparc), some of the arch specific initialization
does not happen for VF device.  That causes panic when archdata is
accessed.

To fix this, I have used already defined weak function
pcibios_setup_device to copy archdata from PF to VF.
Also verified the fix.

Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Fix sparc64_set_context stack handling.
David S. Miller [Tue, 1 Mar 2016 05:25:32 +0000 (00:25 -0500)]
sparc64: Fix sparc64_set_context stack handling.

[ Upstream commit 397d1533b6cce0ccb5379542e2e6d079f6936c46 ]

Like a signal return, we should use synchronize_user_stack() rather
than flush_user_windows().

Reported-by: Ilya Malakhov <ilmalakhovthefirst@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Fix numa node distance initialization
Nitin Gupta [Wed, 6 Jan 2016 06:35:35 +0000 (22:35 -0800)]
sparc64: Fix numa node distance initialization

[ Upstream commit 36beca6571c941b28b0798667608239731f9bc3a ]

Orabug: 22495713

Currently, NUMA node distance matrix is initialized only
when a machine descriptor (MD) exists. However, sun4u
machines (e.g. Sun Blade 2500) do not have an MD and thus
distance values were left uninitialized. The initialization
is now moved such that it happens on both sun4u and sun4v.

Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Tested-by: Mikael Pettersson <mikpelinux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc64: Fix bootup regressions on some Kconfig combinations.
David S. Miller [Wed, 27 Apr 2016 21:27:37 +0000 (17:27 -0400)]
sparc64: Fix bootup regressions on some Kconfig combinations.

[ Upstream commit 49fa5230462f9f2c4e97c81356473a6bdf06c422 ]

The system call tracing bug fix mentioned in the Fixes tag
below increased the amount of assembler code in the sequence
of assembler files included by head_64.S

This caused to total set of code to exceed 0x4000 bytes in
size, which overflows the expression in head_64.S that works
to place swapper_tsb at address 0x408000.

When this is violated, the TSB is not properly aligned, and
also the trap table is not aligned properly either.  All of
this together results in failed boots.

So, do two things:

1) Simplify some code by using ba,a instead of ba/nop to get
   those bytes back.

2) Add a linker script assertion to make sure that if this
   happens again the build will fail.

Fixes: 1a40b95374f6 ("sparc: Fix system call tracing register handling.")
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Joerg Abraham <joerg.abraham@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosparc: Fix system call tracing register handling.
Mike Frysinger [Mon, 18 Jan 2016 11:32:30 +0000 (06:32 -0500)]
sparc: Fix system call tracing register handling.

[ Upstream commit 1a40b95374f680625318ab61d81958e949e0afe3 ]

A system call trace trigger on entry allows the tracing
process to inspect and potentially change the traced
process's registers.

Account for that by reloading the %g1 (syscall number)
and %i0-%i5 (syscall argument) values.  We need to be
careful to revalidate the range of %g1, and reload the
system call table entry it corresponds to into %l7.

Reported-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agofix d_walk()/non-delayed __d_free() race
Al Viro [Wed, 8 Jun 2016 01:26:55 +0000 (21:26 -0400)]
fix d_walk()/non-delayed __d_free() race

commit 3d56c25e3bb0726a5c5e16fc2d9e38f8ed763085 upstream.

Ascend-to-parent logics in d_walk() depends on all encountered child
dentries not getting freed without an RCU delay.  Unfortunately, in
quite a few cases it is not true, with hard-to-hit oopsable race as
the result.

Fortunately, the fix is simiple; right now the rule is "if it ever
been hashed, freeing must be delayed" and changing it to "if it
ever had a parent, freeing must be delayed" closes that hole and
covers all cases the old rule used to cover.  Moreover, pipes and
sockets remain _not_ covered, so we do not introduce RCU delay in
the cases which are the reason for having that delay conditional
in the first place.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agosched: panic on corrupted stack end
Jann Horn [Wed, 1 Jun 2016 09:55:07 +0000 (11:55 +0200)]
sched: panic on corrupted stack end

commit 29d6455178a09e1dc340380c582b13356227e8df upstream.

Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g.  via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).

Just panic directly.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoproc: prevent stacking filesystems on top
Jann Horn [Wed, 1 Jun 2016 09:55:05 +0000 (11:55 +0200)]
proc: prevent stacking filesystems on top

commit e54ad7f1ee263ffa5a2de9c609d58dfa27b21cd9 upstream.

This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem.  There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.

(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agox86/entry/traps: Don't force in_interrupt() to return true in IST handlers
Andy Lutomirski [Tue, 24 May 2016 22:54:04 +0000 (15:54 -0700)]
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers

commit aaee8c3c5cce2d9107310dd9f3026b4f901d441c upstream.

Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code.  This fixes warnings like:

  NOHZ: local_softirq_pending 282

... which can happen when running things like selftests/x86.

This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context")
Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agowext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
Prasun Maiti [Mon, 6 Jun 2016 14:34:19 +0000 (20:04 +0530)]
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel

commit 3d5fdff46c4b2b9534fa2f9fc78e90a48e0ff724 upstream.

iwpriv app uses iw_point structure to send data to Kernel. The iw_point
structure holds a pointer. For compatibility Kernel converts the pointer
as required for WEXT IOCTLs (SIOCIWFIRST to SIOCIWLAST). Some drivers
may use iw_handler_def.private_args to populate iwpriv commands instead
of iw_handler_def.private. For those case, the IOCTLs from
SIOCIWFIRSTPRIV to SIOCIWLASTPRIV will follow the path ndo_do_ioctl().
Accordingly when the filled up iw_point structure comes from 32 bit
iwpriv to 64 bit Kernel, Kernel will not convert the pointer and sends
it to driver. So, the driver may get the invalid data.

The pointer conversion for the IOCTLs (SIOCIWFIRSTPRIV to
SIOCIWLASTPRIV), which follow the path ndo_do_ioctl(), is mandatory.
This patch adds pointer conversion from 32 bit to 64 bit and vice versa,
if the ioctl comes from 32 bit iwpriv to 64 bit Kernel.

Signed-off-by: Prasun Maiti <prasunmaiti87@gmail.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Tested-by: Dibyajyoti Ghosh <dibyajyotig@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoecryptfs: forbid opening files without mmap handler
Jann Horn [Wed, 1 Jun 2016 09:55:06 +0000 (11:55 +0200)]
ecryptfs: forbid opening files without mmap handler

commit 2f36db71009304b3f0b95afacd8eba1f9f046b87 upstream.

This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.

Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomemcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
Tejun Heo [Fri, 3 Jun 2016 21:55:44 +0000 (14:55 -0700)]
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()

commit 3a06bb78ceeceacc86a1e31133a7944013f9775b upstream.

memcg_offline_kmem() may be called from memcg_free_kmem() after a css
init failure.  memcg_free_kmem() is a ->css_free callback which is
called without cgroup_mutex and memcg_offline_kmem() ends up using
css_for_each_descendant_pre() without any locking.  Fix it by adding rcu
read locking around it.

    mkdir: cannot create directory `65530': No space left on device
    ===============================
    [ INFO: suspicious RCU usage. ]
    4.6.0-work+ #321 Not tainted
    -------------------------------
    kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required!
     [  527.243970] other info that might help us debug this:
     [  527.244715]
    rcu_scheduler_active = 1, debug_locks = 0
    2 locks held by kworker/0:5/1664:
     #0:  ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
     #1:  ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
     [  527.248098] stack backtrace:
    CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ #321
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
    Workqueue: cgroup_destroy css_free_work_fn
    Call Trace:
      dump_stack+0x68/0xa1
      lockdep_rcu_suspicious+0xd7/0x110
      css_next_descendant_pre+0x7d/0xb0
      memcg_offline_kmem.part.44+0x4a/0xc0
      mem_cgroup_css_free+0x1ec/0x200
      css_free_work_fn+0x49/0x5e0
      process_one_work+0x1c5/0x4a0
      worker_thread+0x49/0x490
      kthread+0xea/0x100
      ret_from_fork+0x1f/0x40

Link: http://lkml.kernel.org/r/20160526203018.GG23194@mtj.duckdns.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoparisc: Fix pagefault crash in unaligned __get_user() call
Helge Deller [Sat, 4 Jun 2016 15:21:33 +0000 (17:21 +0200)]
parisc: Fix pagefault crash in unaligned __get_user() call

commit 8b78f260887df532da529f225c49195d18fef36b upstream.

One of the debian buildd servers had this crash in the syslog without
any other information:

 Unaligned handler failed, ret = -2
 clock_adjtime (pid 22578): Unaligned data reference (code 28)
 CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G  E  4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001001111100000001111 Tainted: G            E
 r00-03  000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
 r04-07  00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
 r08-11  0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
 r12-15  000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
 r16-19  0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
 r20-23  0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
 r24-27  0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
 r28-31  0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
 sr00-03  0000000001200000 0000000001200000 0000000000000000 0000000001200000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88
  IIR: 0ca0d089    ISR: 0000000001200000  IOR: 00000000fa6f7fff
  CPU:        1   CR30: 00000001bde7c000 CR31: ffffffffffffffff
  ORIG_R28: 00000002369fe628
  IAOQ[0]: compat_get_timex+0x2dc/0x3c0
  IAOQ[1]: compat_get_timex+0x2e0/0x3c0
  RP(r2): compat_get_timex+0x40/0x3c0
 Backtrace:
  [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
  [<0000000040205024>] syscall_exit+0x0/0x14

This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.

The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in.  The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.

The following program reproduces the problem:

#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>

int main(void) {
        /* allocate 8k */
        char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
        /* free second half (upper 4k) and make it invalid. */
        munmap(ptr+4096, 4096);
        /* syscall where first int is unaligned and clobbers into invalid memory region */
        /* syscall should return EFAULT */
        return syscall(__NR_clock_adjtime, 0, ptr+4095);
}

To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.

While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopinctrl: mediatek: fix dual-edge code defect
hongkun.cao [Sat, 21 May 2016 07:23:39 +0000 (15:23 +0800)]
pinctrl: mediatek: fix dual-edge code defect

commit 5edf673d07fdcb6498be24914f3f38f8d8843199 upstream.

When a dual-edge irq is triggered, an incorrect irq will be reported on
condition that the external signal is not stable and this incorrect irq
has been registered.
Correct the register offset.

Signed-off-by: Hongkun Cao <hongkun.cao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopowerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
Thomas Huth [Tue, 31 May 2016 05:51:17 +0000 (07:51 +0200)]
powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call

commit 7cc851039d643a2ee7df4d18177150f2c3a484f5 upstream.

If we do not provide the PVR for POWER8NVL, a guest on this system
currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU
does not provide a generic PowerISA 2.07 mode yet. So some new
instructions from POWER8 (like "mtvsrd") get disabled for the guest,
resulting in crashes when using code compiled explicitly for
POWER8 (e.g. with the "-mcpu=power8" option of GCC).

Fixes: ddee09c099c3 ("powerpc: Add PVR for POWER8NVL processor")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopowerpc: Use privileged SPR number for MMCR2
Thomas Huth [Thu, 12 May 2016 11:29:11 +0000 (13:29 +0200)]
powerpc: Use privileged SPR number for MMCR2

commit 8dd75ccb571f3c92c48014b3dabd3d51a115ab41 upstream.

We are already using the privileged versions of MMCR0, MMCR1
and MMCRA in the kernel, so for MMCR2, we should better use
the privileged versions, too, to be consistent.

Fixes: 240686c13687 ("powerpc: Initialise PMU related regs on Power8")
Suggested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopowerpc: Fix definition of SIAR and SDAR registers
Thomas Huth [Thu, 12 May 2016 11:26:44 +0000 (13:26 +0200)]
powerpc: Fix definition of SIAR and SDAR registers

commit d23fac2b27d94aeb7b65536a50d32bfdc21fe01e upstream.

The SIAR and SDAR registers are available twice, one time as SPRs
780 / 781 (unprivileged, but read-only), and one time as the SPRs
796 / 797 (privileged, but read and write). The Linux kernel code
currently uses the unprivileged  SPRs - while this is OK for reading,
writing to that register of course does not work.
Since the KVM code tries to write to this register, too (see the mtspr
in book3s_hv_rmhandlers.S), the contents of this register sometimes get
lost for the guests, e.g. during migration of a VM.
To fix this issue, simply switch to the privileged SPR numbers instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopowerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
Russell Currey [Thu, 7 Apr 2016 06:28:26 +0000 (16:28 +1000)]
powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge

commit 871e178e0f2c4fa788f694721a10b4758d494ce1 upstream.

In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the
spec states that values of 9900-9905 can be returned, indicating that
software should delay for 10^x (where x is the last digit, i.e. 990x)
milliseconds and attempt the call again. Currently, the kernel doesn't
know about this, and respecting it fixes some PCI failures when the
hypervisor is busy.

The delay is capped at 0.2 seconds.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoarm64: mm: always take dirty state from new pte in ptep_set_access_flags
Will Deacon [Tue, 7 Jun 2016 16:55:15 +0000 (17:55 +0100)]
arm64: mm: always take dirty state from new pte in ptep_set_access_flags

commit 0106d456c4cb1770253fefc0ab23c9ca760b43f7 upstream.

Commit 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for
hardware AF/DBM") ensured that pte flags are updated atomically in the
face of potential concurrent, hardware-assisted updates. However, Alex
reports that:

 | This patch breaks swapping for me.
 | In the broken case, you'll see either systemd cpu time spike (because
 | it's stuck in a page fault loop) or the system hang (because the
 | application owning the screen is stuck in a page fault loop).

It turns out that this is because the 'dirty' argument to
ptep_set_access_flags is always 0 for read faults, and so we can't use
it to set PTE_RDONLY. The failing sequence is:

  1. We put down a PTE_WRITE | PTE_DIRTY | PTE_AF pte
  2. Memory pressure -> pte_mkold(pte) -> clear PTE_AF
  3. A read faults due to the missing access flag
  4. ptep_set_access_flags is called with dirty = 0, due to the read fault
  5. pte is then made PTE_WRITE | PTE_DIRTY | PTE_AF | PTE_RDONLY (!)
  6. A write faults, but pte_write is true so we get stuck

The solution is to check the new page table entry (as would be done by
the generic, non-atomic definition of ptep_set_access_flags that just
calls set_pte_at) to establish the dirty state.

Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Alexander Graf <agraf@suse.de>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoarm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
Catalin Marinas [Tue, 31 May 2016 14:55:03 +0000 (15:55 +0100)]
arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks

commit e47b020a323d1b2a7b1e9aac86e99eae19463630 upstream.

This patch brings the PER_LINUX32 /proc/cpuinfo format more in line with
the 32-bit ARM one by providing an additional line:

model name      : ARMv8 Processor rev X (v8l)

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: ccp - Fix AES XTS error for request sizes above 4096
Tom Lendacky [Fri, 20 May 2016 22:33:03 +0000 (17:33 -0500)]
crypto: ccp - Fix AES XTS error for request sizes above 4096

commit ab6a11a7c8ef47f996974dd3c648c2c0b1a36ab1 upstream.

The ccp-crypto module for AES XTS support has a bug that can allow requests
greater than 4096 bytes in size to be passed to the CCP hardware. The CCP
hardware does not support request sizes larger than 4096, resulting in
incorrect output. The request should actually be handled by the fallback
mechanism instantiated by the ccp-crypto module.

Add a check to insure the request size is less than or equal to the maximum
supported size and use the fallback mechanism if it is not.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agocrypto: public_key: select CRYPTO_AKCIPHER
Arnd Bergmann [Wed, 18 May 2016 14:55:56 +0000 (16:55 +0200)]
crypto: public_key: select CRYPTO_AKCIPHER

commit bad6a185b4d6f81d0ed2b6e4c16307969f160b95 upstream.

In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:

crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'

This adds a Kconfig 'select' statement to ensure the dependency
is always there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoirqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
Marc Zyngier [Thu, 2 Jun 2016 08:00:28 +0000 (09:00 +0100)]
irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask

commit dd5f1b049dc139876801db3cdd0f20d21fd428cc upstream.

The INTID mask is wrong, and is made a signed value, which has
nteresting effects in the KVM emulation. Let's sanitize it.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agos390/bpf: reduce maximum program size to 64 KB
Michael Holzheu [Thu, 12 May 2016 16:10:48 +0000 (18:10 +0200)]
s390/bpf: reduce maximum program size to 64 KB

commit 0fa963553a5c28d8f8aabd8878326d3f782045fc upstream.

The s390 BFP compiler currently uses relative branch instructions
that only support jumps up to 64 KB. Examples are "j", "jnz", "cgrj",
etc.  Currently the maximum size of s390 BPF programs is set
to 0x7ffff.  If branches over 64 KB are generated the, kernel can
crash due to incorrect code.

So fix this an reduce the maximum size to 64 KB. Programs larger than
that will be interpreted.

Fixes: ce2b6ad9c185 ("s390/bpf: increase BPF_SIZE_MAX")
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agos390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
Michael Holzheu [Wed, 11 May 2016 19:13:13 +0000 (21:13 +0200)]
s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop

commit 6edf0aa4f8bbdfbb4d6d786892fa02728d05dc36 upstream.

In case of usage of skb_vlan_push/pop, in the prologue we store
the SKB pointer on the stack and restore it after BPF_JMP_CALL
to skb_vlan_push/pop.

Unfortunately currently there are two bugs in the code:

 1) The wrong stack slot (offset 170 instead of 176) is used
 2) The wrong register (W1 instead of B1) is saved

So fix this and use correct stack slot and register.

Fixes: 9db7f2b81880 ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop")
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agogpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
Ben Dooks [Tue, 7 Jun 2016 16:22:17 +0000 (17:22 +0100)]
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings

commit b66b2a0adf0e48973b582e055758b9907a7eee7c upstream.

The bcm_kona_gpio_reset() calls bcm_kona_gpio_write_lock_regs()
with what looks like the wrong parameter. The write_lock_regs
function takes a pointer to the registers, not the bcm_kona_gpio
structure.

Fix the warning, and probably bug by changing the function to
pass reg_base instead of kona_gpio, fixing the following warning:

drivers/gpio/gpio-bcm-kona.c:550:47: warning: incorrect type in argument 1
  (different address spaces)
  expected void [noderef] <asn:2>*reg_base
  got struct bcm_kona_gpio *kona_gpio
  warning: incorrect type in argument 1 (different address spaces)
  expected void [noderef] <asn:2>*reg_base
  got struct bcm_kona_gpio *kona_gpio

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoARM: fix PTRACE_SETVFPREGS on SMP systems
Russell King [Mon, 30 May 2016 22:14:56 +0000 (23:14 +0100)]
ARM: fix PTRACE_SETVFPREGS on SMP systems

commit e2dfb4b880146bfd4b6aa8e138c0205407cebbaf upstream.

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread->vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Fixes: 8130b9d7b9d8 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Simon Marchi <simon.marchi@ericsson.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda/realtek: Add T560 docking unit fixup
Torsten Hilbrich [Tue, 7 Jun 2016 11:14:21 +0000 (13:14 +0200)]
ALSA: hda/realtek: Add T560 docking unit fixup

commit dab38e43b298501a4e8807b56117c029e2e98383 upstream.

Tested with Lenovo Ultradock. Fixes the non-working headphone jack on
the docking unit.

Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
Kailang Yang [Mon, 30 May 2016 08:44:20 +0000 (16:44 +0800)]
ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703

commit 6fbae35a3170c3e2b1b9d7b9cc943cbe48771362 upstream.

Support new codecs for ALC700/ALC701/ALC703.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda/realtek - ALC256 speaker noise issue
Kailang Yang [Mon, 30 May 2016 07:58:28 +0000 (15:58 +0800)]
ALSA: hda/realtek - ALC256 speaker noise issue

commit e69e7e03ed225abf3e1c43545aa3bcb68dc81d5f upstream.

That is some different register for ALC255 and ALC256.
ALC256 can't fit with some ALC255 register.
This issue is cause from LDO output voltage control.
This patch is updated the right LDO register value.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Fix headset mic detection problem for Dell machine
AceLan Kao [Fri, 3 Jun 2016 06:45:25 +0000 (14:45 +0800)]
ALSA: hda - Fix headset mic detection problem for Dell machine

commit f90d83b301701026b2e4c437a3613f377f63290e upstream.

Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoALSA: hda - Add PCI ID for Kabylake
Vinod Koul [Thu, 9 Jun 2016 06:02:14 +0000 (11:32 +0530)]
ALSA: hda - Add PCI ID for Kabylake

commit 35639a0e98391036a4c7f23253c321d6621a8897 upstream.

Kabylake shows up as PCI ID 0xa171. And Kabylake-LP as 0x9d71.
Since these are similar to Skylake add these to SKL_PLUS macro

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
Paolo Bonzini [Wed, 1 Jun 2016 12:09:21 +0000 (14:09 +0200)]
KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi

commit c622a3c21ede892e370b56e1ceb9eb28f8bbda6b upstream.

Found by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
    IP: [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
    PGD 6f80b067 PUD b6535067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 3 PID: 4988 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
    [...]
    Call Trace:
     [<ffffffffa0795f62>] irqfd_update+0x32/0xc0 [kvm]
     [<ffffffffa0796c7c>] kvm_irqfd+0x3dc/0x5b0 [kvm]
     [<ffffffffa07943f4>] kvm_vm_ioctl+0x164/0x6f0 [kvm]
     [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
     [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
     [<ffffffff817a1062>] tracesys_phase2+0x84/0x89
    Code: b5 71 a7 e0 5b 41 5c 41 5d 5d f3 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8b 8f 10 2e 00 00 31 c0 48 89 e5 <39> 91 20 01 00 00 76 6a 48 63 d2 48 8b 94 d1 28 01 00 00 48 85
    RIP  [<ffffffffa0797202>] kvm_irq_map_gsi+0x12/0x90 [kvm]
     RSP <ffff8800926cbca8>
    CR2: 0000000000000120

Testcase:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[26];

    int main()
    {
        memset(r, -1, sizeof(r));
        r[2] = open("/dev/kvm", 0);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);

        struct kvm_irqfd ifd;
        ifd.fd = syscall(SYS_eventfd2, 5, 0);
        ifd.gsi = 3;
        ifd.flags = 2;
        ifd.resamplefd = ifd.fd;
        r[25] = ioctl(r[3], KVM_IRQFD, &ifd);
        return 0;
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoKVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
Paolo Bonzini [Wed, 1 Jun 2016 12:09:23 +0000 (14:09 +0200)]
KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS

commit d14bdb553f9196169f003058ae1cdabe514470e6 upstream.

MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to
any of bits 63:32.  However, this is not detected at KVM_SET_DEBUGREGS
time, and the next KVM_RUN oopses:

   general protection fault: 0000 [#1] SMP
   CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1
   Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012
   [...]
   Call Trace:
    [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm]
    [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm]
    [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480
    [<ffffffff812418a9>] SyS_ioctl+0x79/0x90
    [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
   RIP  [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40
    RSP <ffff88005836bd50>

Testcase (beautified/reduced from syzkaller output):

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[8];

    int main()
    {
        struct kvm_debugregs dr = { 0 };

        r[2] = open("/dev/kvm", O_RDONLY);
        r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
        r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);

        memcpy(&dr,
               "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72"
               "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8"
               "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9"
               "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb",
               48);
        r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr);
        r[6] = ioctl(r[4], KVM_RUN, 0);
    }

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agovxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
David Wragg [Fri, 3 Jun 2016 22:58:15 +0000 (18:58 -0400)]
vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices

[ Upstream commit 7e059158d57b79159eaf1f504825d19866ef2c42 ]

Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could
transmit vxlan packets of any size, constrained only by the ability to
send out the resulting packets.  4.3 introduced netdevs corresponding
to tunnel vports.  These netdevs have an MTU, which limits the size of
a packet that can be successfully encapsulated.  The default MTU
values are low (1500 or less), which is awkwardly small in the context
of physical networks supporting jumbo frames, and leads to a
conspicuous change in behaviour for userspace.

Instead, set the MTU on openvswitch-created netdevs to be the relevant
maximum (i.e. the maximum IP packet size minus any relevant overhead),
effectively restoring the behaviour prior to 4.3.

Signed-off-by: David Wragg <david@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agogeneve: Relax MTU constraints
David Wragg [Fri, 3 Jun 2016 22:58:14 +0000 (18:58 -0400)]
geneve: Relax MTU constraints

[ Upstream commit 55e5bfb53cff286c1c1ff49f51325dc15c7fea63 ]

Allow the MTU of geneve devices to be set to large values, in order to
exploit underlying networks with larger frame sizes.

GENEVE does not have a fixed encapsulation overhead (an openvswitch
rule can add variable length options), so there is no relevant maximum
MTU to enforce.  A maximum of IP_MAX_MTU is used instead.
Encapsulated packets that are too big for the underlying network will
get dropped on the floor.

Signed-off-by: David Wragg <david@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agovxlan: Relax MTU constraints
David Wragg [Fri, 3 Jun 2016 22:58:13 +0000 (18:58 -0400)]
vxlan: Relax MTU constraints

[ Upstream commit 72564b59ffc438ea103b0727a921aaddce766728 ]

Allow the MTU of vxlan devices without an underlying device to be set
to larger values (up to a maximum based on IP packet limits and vxlan
overhead).

Previously, their MTUs could not be set to higher than the
conventional ethernet value of 1500.  This is a very arbitrary value
in the context of vxlan, and prevented vxlan devices from being able
to take advantage of jumbo frames etc.

The default MTU remains 1500, for compatibility.

Signed-off-by: David Wragg <david@weave.works>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>